388 lines
9.6 KiB
C
388 lines
9.6 KiB
C
/*
|
|
* File : serial.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2006, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://openlab.rt-thread.com/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2006-08-23 Bernard first version
|
|
* 2009-05-14 Bernard add RT-THread device interface
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
|
|
#include "AT91SAM7S.h"
|
|
#include "serial.h"
|
|
|
|
/**
|
|
* @addtogroup AT91SAM7
|
|
*/
|
|
/*@{*/
|
|
typedef volatile rt_uint32_t REG32;
|
|
struct rt_at91serial_hw
|
|
{
|
|
REG32 US_CR; // Control Register
|
|
REG32 US_MR; // Mode Register
|
|
REG32 US_IER; // Interrupt Enable Register
|
|
REG32 US_IDR; // Interrupt Disable Register
|
|
REG32 US_IMR; // Interrupt Mask Register
|
|
REG32 US_CSR; // Channel Status Register
|
|
REG32 US_RHR; // Receiver Holding Register
|
|
REG32 US_THR; // Transmitter Holding Register
|
|
REG32 US_BRGR; // Baud Rate Generator Register
|
|
REG32 US_RTOR; // Receiver Time-out Register
|
|
REG32 US_TTGR; // Transmitter Time-guard Register
|
|
REG32 Reserved0[5]; //
|
|
REG32 US_FIDI; // FI_DI_Ratio Register
|
|
REG32 US_NER; // Nb Errors Register
|
|
REG32 Reserved1[1]; //
|
|
REG32 US_IF; // IRDA_FILTER Register
|
|
REG32 Reserved2[44]; //
|
|
REG32 US_RPR; // Receive Pointer Register
|
|
REG32 US_RCR; // Receive Counter Register
|
|
REG32 US_TPR; // Transmit Pointer Register
|
|
REG32 US_TCR; // Transmit Counter Register
|
|
REG32 US_RNPR; // Receive Next Pointer Register
|
|
REG32 US_RNCR; // Receive Next Counter Register
|
|
REG32 US_TNPR; // Transmit Next Pointer Register
|
|
REG32 US_TNCR; // Transmit Next Counter Register
|
|
REG32 US_PTCR; // PDC Transfer Control Register
|
|
REG32 US_PTSR; // PDC Transfer Status Register
|
|
};
|
|
|
|
struct rt_at91serial
|
|
{
|
|
struct rt_device parent;
|
|
|
|
struct rt_at91serial_hw* hw_base;
|
|
rt_uint16_t peripheral_id;
|
|
rt_uint32_t baudrate;
|
|
|
|
/* reception field */
|
|
rt_uint16_t save_index, read_index;
|
|
rt_uint8_t rx_buffer[RT_UART_RX_BUFFER_SIZE];
|
|
};
|
|
#ifdef RT_USING_UART1
|
|
struct rt_at91serial serial1;
|
|
#endif
|
|
#ifdef RT_USING_UART2
|
|
struct rt_at91serial serial2;
|
|
#endif
|
|
|
|
static void rt_hw_serial_isr(int irqno)
|
|
{
|
|
rt_base_t level;
|
|
struct rt_device* device;
|
|
struct rt_at91serial* serial = RT_NULL;
|
|
|
|
if (irqno == AT91C_ID_US0)
|
|
{
|
|
#ifdef RT_USING_UART1
|
|
/* serial 1 */
|
|
serial = &serial1;
|
|
#endif
|
|
}
|
|
else if (irqno == AT91C_ID_US1)
|
|
{
|
|
#ifdef RT_USING_UART2
|
|
/* serial 2 */
|
|
serial = &serial2;
|
|
#endif
|
|
}
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
/* get generic device object */
|
|
device = (rt_device_t)serial;
|
|
|
|
/* disable interrupt */
|
|
level = rt_hw_interrupt_disable();
|
|
|
|
/* get received character */
|
|
serial->rx_buffer[serial->save_index] = serial->hw_base->US_RHR;
|
|
|
|
/* move to next position */
|
|
serial->save_index ++;
|
|
if (serial->save_index >= RT_UART_RX_BUFFER_SIZE)
|
|
serial->save_index = 0;
|
|
|
|
/* if the next position is read index, discard this 'read char' */
|
|
if (serial->save_index == serial->read_index)
|
|
{
|
|
serial->read_index ++;
|
|
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
|
|
serial->read_index = 0;
|
|
}
|
|
|
|
/* enable interrupt */
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
/* indicate to upper layer application */
|
|
if (device->rx_indicate != RT_NULL)
|
|
device->rx_indicate(device, 1);
|
|
|
|
/* ack interrupt */
|
|
AT91C_AIC_EOICR = 1;
|
|
}
|
|
|
|
static rt_err_t rt_serial_init (rt_device_t dev)
|
|
{
|
|
rt_uint32_t bd;
|
|
struct rt_at91serial* serial = (struct rt_at91serial*) dev;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
/* must be US0 or US1 */
|
|
RT_ASSERT((serial->peripheral_id != AT91C_ID_US0) &&
|
|
(serial->peripheral_id != AT91C_ID_US1));
|
|
|
|
/* Enable Clock for USART */
|
|
AT91C_PMC_PCER = 1 << serial->peripheral_id;
|
|
|
|
/* Enable RxD0 and TxDO Pin */
|
|
if (serial->peripheral_id == AT91C_ID_US0)
|
|
{
|
|
/* set pinmux */
|
|
AT91C_PIO_PDR = (1 << 5) | (1 << 6);
|
|
}
|
|
else if (serial->peripheral_id == AT91C_ID_US1)
|
|
{
|
|
/* set pinmux */
|
|
AT91C_PIO_PDR = (1 << 21) | (1 << 22);
|
|
}
|
|
|
|
serial->hw_base->US_CR = AT91C_US_RSTRX | /* Reset Receiver */
|
|
AT91C_US_RSTTX | /* Reset Transmitter */
|
|
AT91C_US_RXDIS | /* Receiver Disable */
|
|
AT91C_US_TXDIS; /* Transmitter Disable */
|
|
|
|
serial->hw_base->US_MR = AT91C_US_USMODE_NORMAL | /* Normal Mode */
|
|
AT91C_US_CLKS_CLOCK | /* Clock = MCK */
|
|
AT91C_US_CHRL_8_BITS | /* 8-bit Data */
|
|
AT91C_US_PAR_NONE | /* No Parity */
|
|
AT91C_US_NBSTOP_1_BIT; /* 1 Stop Bit */
|
|
|
|
/* set baud rate divisor */
|
|
bd = ((MCK*10)/(serial->baudrate * 16));
|
|
if ((bd % 10) >= 5) bd = (bd / 10) + 1;
|
|
else bd /= 10;
|
|
|
|
serial->hw_base->US_BRGR = bd;
|
|
serial->hw_base->US_CR = AT91C_US_RXEN | /* Receiver Enable */
|
|
AT91C_US_TXEN; /* Transmitter Enable */
|
|
|
|
/* reset rx index */
|
|
serial->save_index = 0;
|
|
serial->read_index = 0;
|
|
|
|
/* reset rx buffer */
|
|
rt_memset(serial->rx_buffer, 0, RT_UART_RX_BUFFER_SIZE);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_serial_open(rt_device_t dev, rt_uint16_t oflag)
|
|
{
|
|
struct rt_at91serial *serial = (struct rt_at91serial*)dev;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
/* enable UART rx interrupt */
|
|
serial->hw_base->US_IER = 1 << 0; /* RxReady interrupt */
|
|
serial->hw_base->US_IMR |= 1 << 0; /* umask RxReady interrupt */
|
|
|
|
/* install UART handler */
|
|
rt_hw_interrupt_install(serial->peripheral_id, rt_hw_serial_isr, RT_NULL);
|
|
AT91C_AIC_SMR(serial->peripheral_id) = 5 | (0x01 << 5);
|
|
rt_hw_interrupt_umask(serial->peripheral_id);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t rt_serial_close(rt_device_t dev)
|
|
{
|
|
struct rt_at91serial *serial = (struct rt_at91serial*)dev;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
/* disable interrupt */
|
|
serial->hw_base->US_IDR = 1 << 0; /* RxReady interrupt */
|
|
serial->hw_base->US_IMR &= ~(1 << 0); /* mask RxReady interrupt */
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_size_t rt_serial_read (rt_device_t dev, rt_off_t pos, void* buffer, rt_size_t size)
|
|
{
|
|
rt_uint8_t* ptr;
|
|
struct rt_at91serial *serial = (struct rt_at91serial*)dev;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
/* point to buffer */
|
|
ptr = (rt_uint8_t*) buffer;
|
|
|
|
if (dev->flag & RT_DEVICE_FLAG_INT_RX)
|
|
{
|
|
while (size)
|
|
{
|
|
/* interrupt receive */
|
|
rt_base_t level;
|
|
|
|
/* disable interrupt */
|
|
level = rt_hw_interrupt_disable();
|
|
if (serial->read_index != serial->save_index)
|
|
{
|
|
*ptr = serial->rx_buffer[serial->read_index];
|
|
|
|
serial->read_index ++;
|
|
if (serial->read_index >= RT_UART_RX_BUFFER_SIZE)
|
|
serial->read_index = 0;
|
|
}
|
|
else
|
|
{
|
|
/* no data in rx buffer */
|
|
|
|
/* enable interrupt */
|
|
rt_hw_interrupt_enable(level);
|
|
break;
|
|
}
|
|
|
|
/* enable interrupt */
|
|
rt_hw_interrupt_enable(level);
|
|
|
|
ptr ++; size --;
|
|
}
|
|
|
|
return (rt_uint32_t)ptr - (rt_uint32_t)buffer;
|
|
}
|
|
else if (dev->flag & RT_DEVICE_FLAG_DMA_RX)
|
|
{
|
|
/* not support right now */
|
|
RT_ASSERT(0);
|
|
}
|
|
else
|
|
{
|
|
/* poll mode */
|
|
while (size)
|
|
{
|
|
/* Wait for Full Rx Buffer */
|
|
while (!(serial->hw_base->US_CSR & AT91C_US_RXRDY));
|
|
|
|
/* Read Character */
|
|
*ptr = serial->hw_base->US_RHR;
|
|
ptr ++;
|
|
size --;
|
|
}
|
|
|
|
return (rt_size_t)ptr - (rt_size_t)buffer;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static rt_size_t rt_serial_write (rt_device_t dev, rt_off_t pos, const void* buffer, rt_size_t size)
|
|
{
|
|
rt_uint8_t* ptr;
|
|
struct rt_at91serial *serial = (struct rt_at91serial*)dev;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
|
|
ptr = (rt_uint8_t*) buffer;
|
|
if (dev->open_flag & RT_DEVICE_OFLAG_WRONLY)
|
|
{
|
|
if (dev->flag & RT_DEVICE_FLAG_STREAM)
|
|
{
|
|
/* it's a stream mode device */
|
|
while (size)
|
|
{
|
|
/* stream mode */
|
|
if (*ptr == '\n')
|
|
{
|
|
while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));
|
|
serial->hw_base->US_THR = '\r';
|
|
}
|
|
|
|
/* Wait for Empty Tx Buffer */
|
|
while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));
|
|
|
|
/* Transmit Character */
|
|
serial->hw_base->US_THR = *ptr;
|
|
ptr ++; size --;
|
|
}
|
|
}
|
|
else
|
|
{
|
|
while (size)
|
|
{
|
|
/* Wait for Empty Tx Buffer */
|
|
while (!(serial->hw_base->US_CSR & AT91C_US_TXRDY));
|
|
|
|
/* Transmit Character */
|
|
serial->hw_base->US_THR = *ptr;
|
|
ptr ++; size --;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (rt_size_t)ptr - (rt_size_t)buffer;
|
|
}
|
|
|
|
static rt_err_t rt_serial_control (rt_device_t dev, rt_uint8_t cmd, void *args)
|
|
{
|
|
return RT_EOK;
|
|
}
|
|
|
|
rt_err_t rt_hw_serial_init()
|
|
{
|
|
rt_device_t device;
|
|
|
|
#ifdef RT_USING_UART1
|
|
device = (rt_device_t) &serial1;
|
|
|
|
/* init serial device private data */
|
|
serial1.hw_base = (struct rt_at91serial_hw*)AT91C_BASE_US0;
|
|
serial1.peripheral_id = AT91C_ID_US0;
|
|
serial1.baudrate = 115200;
|
|
|
|
/* set device virtual interface */
|
|
device->init = rt_serial_init;
|
|
device->open = rt_serial_open;
|
|
device->close = rt_serial_close;
|
|
device->read = rt_serial_read;
|
|
device->write = rt_serial_write;
|
|
device->control = rt_serial_control;
|
|
|
|
/* register uart1 on device subsystem */
|
|
rt_device_register(device, "uart1", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
device = (rt_device_t) &serial2;
|
|
|
|
serial2.hw_base = (struct rt_at91serial_hw*)AT91C_BASE_US1;
|
|
serial2.peripheral_id = AT91C_ID_US1;
|
|
serial2.baudrate = 115200;
|
|
|
|
/* set device virtual interface */
|
|
device->init = rt_serial_init;
|
|
device->open = rt_serial_open;
|
|
device->close = rt_serial_close;
|
|
device->read = rt_serial_read;
|
|
device->write = rt_serial_write;
|
|
device->control = rt_serial_control;
|
|
|
|
/* register uart2 on device subsystem */
|
|
rt_device_register(device, "uart2", RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX);
|
|
#endif
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
/*@}*/
|