rt-thread/bsp/stm32_radio/fmt0371/fmt0371.c

210 lines
7.2 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#include "fmt0371.h"
#include "stm32f10x.h"
#define FSMC_GPIO_CONFIG
//static void delay_ms(unsigned int dt)
//{
// volatile unsigned int u;
// for (u=0;u<dt*30;u++);
//}
static void FSMC_Init(void)
{
FSMC_NORSRAMInitTypeDef FSMC_NORSRAMInitStructure;
FSMC_NORSRAMTimingInitTypeDef p;
//
//#ifdef FSMC_GPIO_CONFIG
// GPIO_InitTypeDef GPIO_InitStructure;
//
// RCC_APB2PeriphClockCmd(RCC_APB2Periph_GPIOD | RCC_APB2Periph_GPIOG | RCC_APB2Periph_GPIOE |
// RCC_APB2Periph_GPIOF, ENABLE);
//
// /*-- GPIO Configuration ------------------------------------------------------*/
// /* SRAM Data lines configuration */
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_8 | GPIO_Pin_9 |
// GPIO_Pin_10 | GPIO_Pin_14 | GPIO_Pin_15;
// GPIO_InitStructure.GPIO_Mode = GPIO_Mode_AF_PP;
// GPIO_InitStructure.GPIO_Speed = GPIO_Speed_50MHz;
// GPIO_Init(GPIOD, &GPIO_InitStructure);
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_7 | GPIO_Pin_8 | GPIO_Pin_9 | GPIO_Pin_10 |
// GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13 | GPIO_Pin_14 |
// GPIO_Pin_15;
// GPIO_Init(GPIOE, &GPIO_InitStructure);
//
// /* SRAM Address lines configuration */
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 |
// GPIO_Pin_4 | GPIO_Pin_5 | GPIO_Pin_12 | GPIO_Pin_13 |
// GPIO_Pin_14 | GPIO_Pin_15;
// GPIO_Init(GPIOF, &GPIO_InitStructure);
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1 | GPIO_Pin_2 | GPIO_Pin_3 |
// GPIO_Pin_4 | GPIO_Pin_5;
// GPIO_Init(GPIOG, &GPIO_InitStructure);
//
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_11 | GPIO_Pin_12 | GPIO_Pin_13;
// GPIO_Init(GPIOD, &GPIO_InitStructure);
//
// /* NOE and NWE configuration */
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_4 |GPIO_Pin_5;
// GPIO_Init(GPIOD, &GPIO_InitStructure);
//
// /* NE2 configuration */
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_9 | GPIO_Pin_10;
// GPIO_Init(GPIOG, &GPIO_InitStructure);
//
// /* NBL0, NBL1 configuration */
// GPIO_InitStructure.GPIO_Pin = GPIO_Pin_0 | GPIO_Pin_1;
// GPIO_Init(GPIOE, &GPIO_InitStructure);
//#endif
/*-- FSMC Configuration ------------------------------------------------------*/
p.FSMC_AddressSetupTime = 2; // safe value 2
p.FSMC_AddressHoldTime = 1; // safe value 2
p.FSMC_DataSetupTime = 3; // safe value 5
p.FSMC_BusTurnAroundDuration = 0;
p.FSMC_CLKDivision = 0;
p.FSMC_DataLatency = 0;
p.FSMC_AccessMode = FSMC_AccessMode_A;
FSMC_NORSRAMInitStructure.FSMC_Bank = FSMC_Bank1_NORSRAM2;
FSMC_NORSRAMInitStructure.FSMC_DataAddressMux = FSMC_DataAddressMux_Disable;
FSMC_NORSRAMInitStructure.FSMC_MemoryType = FSMC_MemoryType_SRAM;
FSMC_NORSRAMInitStructure.FSMC_MemoryDataWidth = FSMC_MemoryDataWidth_8b;
FSMC_NORSRAMInitStructure.FSMC_BurstAccessMode = FSMC_BurstAccessMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalPolarity = FSMC_WaitSignalPolarity_Low;
FSMC_NORSRAMInitStructure.FSMC_WrapMode = FSMC_WrapMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignalActive = FSMC_WaitSignalActive_BeforeWaitState;
FSMC_NORSRAMInitStructure.FSMC_WriteOperation = FSMC_WriteOperation_Enable;
FSMC_NORSRAMInitStructure.FSMC_WaitSignal = FSMC_WaitSignal_Disable;
FSMC_NORSRAMInitStructure.FSMC_ExtendedMode = FSMC_ExtendedMode_Disable;
FSMC_NORSRAMInitStructure.FSMC_WriteBurst = FSMC_WriteBurst_Disable;
FSMC_NORSRAMInitStructure.FSMC_ReadWriteTimingStruct = &p;
FSMC_NORSRAMInitStructure.FSMC_WriteTimingStruct = &p;
FSMC_NORSRAMInit(&FSMC_NORSRAMInitStructure);
/* Enable FSMC Bank1_SRAM Bank */
FSMC_NORSRAMCmd(FSMC_Bank1_NORSRAM2, ENABLE);
}
void ftm0371_port_init(void)
{
// GPIO_InitTypeDef GPIO_InitStructure;
//
// RCC_APB2PeriphClockCmd(LCD_RST_RCC, ENABLE);
// GPIO_InitStructure.GPIO_Pin = LCD_RST_PIN;
// GPIO_InitStructure.GPIO_Mode = GPIO_Mode_Out_PP;
// GPIO_InitStructure.GPIO_Speed = GPIO_Speed_10MHz;
// GPIO_Init(LCD_RST_PORT, &GPIO_InitStructure);
// LCD_RST_0; // reset the lcd
RCC_AHBPeriphClockCmd(RCC_AHBPeriph_FSMC, ENABLE);
FSMC_Init();
}
//<2F><>ʼ<EFBFBD><CABC><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
void ftm0371_init(void)
{
// LCD_RST_1;
// delay_ms(1000);
//initializing funciton 1
LCD_WR_REG(0xA1);
LCD_WR_DATA8(0x00);
LCD_WR_REG(0xA0);
LCD_WR_DATA8(0x00);
LCD_WR_CMD(0,0x70,0xC8);
LCD_WR_CMD(0,0x72,0xA3);
LCD_WR_CMD(0,0x73,0x04);
LCD_WR_CMD(0,0x75,0x45);
LCD_WR_CMD(0,0x76,0x23);
LCD_WR_CMD(0,0x77,0x08);
LCD_WR_CMD(0,0x78,0x08);
LCD_WR_CMD(0,0x79,0x00);
LCD_WR_CMD(0,0x7F,0xF0);
LCD_WR_CMD(0,0x71,0x81); //
LCD_WR_CMD(0,0x0D,0x23);
LCD_WR_CMD(0,0x11,0x00);
LCD_WR_CMD(0,0x12,0x00);
LCD_WR_CMD(0,0x21,0x37);
LCD_WR_CMD(0,0x22,0x02);
LCD_WR_CMD(0,0x23,0x24);
LCD_WR_CMD(0,0x24,0x13);
LCD_WR_CMD(0,0x25,0x0A);
LCD_WR_CMD(0,0x26,0x82);
LCD_WR_CMD(0,0x27,0x01);
LCD_WR_CMD(0,0x1E,0x25);
LCD_WR_CMD(0,0x1F,0x59);
//GAMMA<4D><41><EFBFBD><EFBFBD>
LCD_WR_CMD(1,0x30,0x0777);
LCD_WR_CMD(1,0x31,0x0444);
LCD_WR_CMD(1,0x32,0x0555);
LCD_WR_CMD(1,0x33,0x0444);
LCD_WR_CMD(1,0x34,0x0333);
LCD_WR_CMD(1,0x35,0x0333);
LCD_WR_CMD(1,0x36,0x0333);
LCD_WR_CMD(1,0x37,0x0333);
LCD_WR_CMD(1,0x38,0x0444);
LCD_WR_CMD(1,0x39,0x0555);
LCD_WR_CMD(1,0x3A,0x0666);
LCD_WR_CMD(1,0x3B,0x0666);
LCD_WR_CMD(1,0x3C,0x0777);
LCD_WR_CMD(1,0x3D,0x0777);
LCD_WR_CMD(1,0x3E,0x0777);
LCD_WR_CMD(1,0x3F,0x0777);
LCD_WR_CMD(1,0x40,0x0777);
LCD_WR_CMD(1,0x41,0x0777);
LCD_WR_CMD(1,0x42,0x0777);
LCD_WR_CMD(1,0x43,0x0777);
LCD_WR_CMD(1,0x44,0x0777);
LCD_WR_CMD(1,0x45,0x0777);
LCD_WR_CMD(1,0x46,0x0777);
LCD_WR_CMD(1,0x47,0x0777);
LCD_WR_CMD(1,0x48,0x0777);
LCD_WR_CMD(1,0x49,0x0777);
LCD_WR_CMD(1,0x4A,0x0777);
LCD_WR_CMD(1,0x4B,0x0777);
LCD_WR_CMD(1,0x4C,0x0777);
LCD_WR_CMD(1,0x4D,0x0666);
LCD_WR_CMD(1,0x4E,0x0666);
LCD_WR_CMD(1,0x4F,0x0666);
LCD_WR_CMD(0,0x00,0x04); //ɨ<><EFBFBD><E8B7BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
LCD_WR_CMD(0,0x01,0x07); //ɨ<><EFBFBD><E8B7BD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
LCD_WR_CMD(0,0x02,0x00); //X
LCD_WR_CMD(1,0x03,0x0000); //Y
//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD>С<EFBFBD><D0A1><EFBFBD><EFBFBD>
LCD_WR_CMD(0,0x04,0xEF); //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(0~239)
LCD_WR_CMD(1,0x05,0x013F); //<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>(0~319)
//<2F><><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD><EFBFBD>
LCD_WR_CMD(0,0x06,0x00); //ˮƽ<CBAE><C6BD>ʼλ<CABC><CEBB>
LCD_WR_CMD(1,0x07,0x0000); //<2F><>ֱ<EFBFBD><D6B1>ʼλ<CABC><CEBB>
LCD_WR_CMD(0,0x08,0xEF); //ˮƽ<CBAE><C6BD><EFBFBD><EFBFBD>λ<EFBFBD><CEBB>
LCD_WR_CMD(1,0x09,0x013F); //<2F><>ֱ<EFBFBD><D6B1><EFBFBD><EFBFBD>λ<EFBFBD><CEBB>
LCD_WR_CMD(0,0x0A,0x00);
LCD_WR_CMD(0,0x0B,0x00);
LCD_WR_CMD(0,0x0C,0x00);
LCD_WR_CMD(0,0x14,0x00);
LCD_WR_CMD(0,0x15,0x00);
LCD_WR_CMD(0,0x16,0x00);
LCD_WR_CMD(1,0x17,0x01FF);
LCD_WR_CMD(1,0x18,0x01FF);
LCD_WR_CMD(0,0x13,0x00);
LCD_WR_CMD(1,0x19,0x01FF);
LCD_WR_CMD(1,0x1B,0x01FF);
LCD_WR_CMD(1,0x1C,0x01FF);
LCD_WR_CMD(1,0x1A,0x01FF);
LCD_WR_CMD(0,0x1D,0x0E);
LCD_WR_CMD(0,0x10,0x06); //<2F><><EFBFBD><EFBFBD>ʾ
LCD_WR_REG(0x0E);
}