112 lines
4.3 KiB
Plaintext
112 lines
4.3 KiB
Plaintext
Multicast DNS for lwIP
|
|
|
|
Author: Erik Ekman
|
|
|
|
|
|
Note! The MDNS responder does not have all features required by the standards.
|
|
See notes in src/apps/mdns/mdns.c for what is left. It is however usable in normal
|
|
cases - but watch out if many devices on the same network try to use the same
|
|
host/service instance names.
|
|
|
|
|
|
How to enable:
|
|
==============
|
|
|
|
MDNS support does not depend on DNS.
|
|
MDNS supports using IPv4 only, v6 only, or v4+v6.
|
|
|
|
To enable MDNS responder, set
|
|
LWIP_MDNS_RESPONDER = 1
|
|
in lwipopts.h and add src/apps/mdns/mdns.c to your list of files to build.
|
|
|
|
The max number of services supported per netif is defined by MDNS_MAX_SERVICES,
|
|
default is 1.
|
|
|
|
Increase MEMP_NUM_UDP_PCB by 1. MDNS needs one PCB.
|
|
Increase LWIP_NUM_NETIF_CLIENT_DATA by 1 (MDNS needs one entry on netif).
|
|
|
|
MDNS with IPv4 requires LWIP_IGMP = 1, and preferably LWIP_AUTOIP = 1.
|
|
MDNS with IPv6 requires LWIP_IPV6_MLD = 1, and that a link-local address is
|
|
generated.
|
|
|
|
The MDNS code puts its structs on the stack where suitable to reduce dynamic
|
|
memory allocation. It may use up to 1kB of stack.
|
|
|
|
MDNS (like other apps) needs a strncasecmp() implementation. If you have one, define
|
|
'lwip_strnicmp' to it. Otherwise the code will provide an implementation
|
|
for you.
|
|
|
|
|
|
How to use:
|
|
===========
|
|
|
|
Call mdns_resp_init() during system initialization.
|
|
This opens UDP sockets on port 5353 for IPv4 and IPv6.
|
|
|
|
|
|
To start responding on a netif, run
|
|
mdns_resp_add_netif(struct netif *netif, char *hostname, u32_t dns_ttl)
|
|
|
|
The hostname will be copied. If this returns successfully, the netif will join
|
|
the multicast groups and any MDNS/legacy DNS requests sent unicast or multicast
|
|
to port 5353 will be handled:
|
|
- <hostname>.local type A, AAAA or ANY returns relevant IP addresses
|
|
- Reverse lookups (PTR in-addr.arpa, ip6.arpa) of netif addresses
|
|
returns <hostname>.local
|
|
Answers will use the supplied TTL (in seconds)
|
|
MDNS allows UTF-8 names, but it is recommended to stay within ASCII,
|
|
since the default case-insensitive comparison assumes this.
|
|
|
|
Call mdns_resp_announce() every time the IP address on the netif has changed.
|
|
|
|
Call mdns_resp_restart() every time the network interface comes up after being
|
|
down, for example cable connected after being disconnected, administrative
|
|
interface comes up after being down, or the device wakes up from sleep.
|
|
|
|
To stop responding on a netif, run
|
|
mdns_resp_remove_netif(struct netif *netif)
|
|
|
|
|
|
Adding services:
|
|
================
|
|
|
|
The netif first needs to be registered. Then run
|
|
mdns_resp_add_service(struct netif *netif, char *name, char *service,
|
|
u16_t proto, u16_t port, u32_t dns_ttl,
|
|
service_get_txt_fn_t txt_fn, void *txt_userdata);
|
|
|
|
The name and service pointers will be copied. Name refers to the name of the
|
|
service instance, and service is the type of service, like _http
|
|
proto can be DNSSD_PROTO_UDP or DNSSD_PROTO_TCP which represent _udp and _tcp.
|
|
If this call returns successfully, the following queries will be answered:
|
|
- _services._dns-sd._udp.local type PTR returns <service>.<proto>.local
|
|
- <service>.<proto>.local type PTR returns <name>.<service>.<proto>.local
|
|
- <name>.<service>.<proto>.local type SRV returns hostname and port of service
|
|
- <name>.<service>.<proto>.local type TXT builds text strings by calling txt_fn
|
|
with the supplied userdata. The callback adds strings to the reply by calling
|
|
mdns_resp_add_service_txtitem(struct mdns_service *service, char *txt,
|
|
int txt_len). Example callback method:
|
|
|
|
static void srv_txt(struct mdns_service *service, void *txt_userdata)
|
|
{
|
|
res = mdns_resp_add_service_txtitem(service, "path=/", 6);
|
|
LWIP_ERROR("mdns add service txt failed\n", (res == ERR_OK), return);
|
|
}
|
|
|
|
Since a hostname struct is used for TXT storage each single item can be max
|
|
63 bytes long, and the total max length (including length bytes for each
|
|
item) is 255 bytes.
|
|
|
|
If your device runs a webserver on port 80, an example call might be:
|
|
|
|
mdns_resp_add_service(netif, "myweb", "_http"
|
|
DNSSD_PROTO_TCP, 80, 3600, srv_txt, NULL);
|
|
|
|
which will publish myweb._http._tcp.local for any hosts looking for web servers,
|
|
and point them to <hostname>.local:80
|
|
|
|
Relevant information will be sent as additional records to reduce number of
|
|
requests required from a client.
|
|
|
|
To remove a service from a netif, run
|
|
mdns_resp_del_service(struct netif *netif, s8_t slot) |