rt-thread/bsp/tm4c129x/libraries/inc/hw_flash.h

626 lines
33 KiB
C

//*****************************************************************************
//
// hw_flash.h - Macros used when accessing the flash controller.
//
// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Redistribution and use in source and binary forms, with or without
// modification, are permitted provided that the following conditions
// are met:
//
// Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
//
// Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in the
// documentation and/or other materials provided with the
// distribution.
//
// Neither the name of Texas Instruments Incorporated nor the names of
// its contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
//
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
//
// This is part of revision 2.1.4.178 of the Tiva Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_FLASH_H__
#define __HW_FLASH_H__
//*****************************************************************************
//
// The following are defines for the FLASH register offsets.
//
//*****************************************************************************
#define FLASH_FMA 0x400FD000 // Flash Memory Address
#define FLASH_FMD 0x400FD004 // Flash Memory Data
#define FLASH_FMC 0x400FD008 // Flash Memory Control
#define FLASH_FCRIS 0x400FD00C // Flash Controller Raw Interrupt
// Status
#define FLASH_FCIM 0x400FD010 // Flash Controller Interrupt Mask
#define FLASH_FCMISC 0x400FD014 // Flash Controller Masked
// Interrupt Status and Clear
#define FLASH_FMC2 0x400FD020 // Flash Memory Control 2
#define FLASH_FWBVAL 0x400FD030 // Flash Write Buffer Valid
#define FLASH_FLPEKEY 0x400FD03C // Flash Program/Erase Key
#define FLASH_FWBN 0x400FD100 // Flash Write Buffer n
#define FLASH_PP 0x400FDFC0 // Flash Peripheral Properties
#define FLASH_FSIZE 0x400FDFC0 // Flash Size
#define FLASH_SSIZE 0x400FDFC4 // SRAM Size
#define FLASH_CONF 0x400FDFC8 // Flash Configuration Register
#define FLASH_ROMSWMAP 0x400FDFCC // ROM Software Map
#define FLASH_DMASZ 0x400FDFD0 // Flash DMA Address Size
#define FLASH_DMAST 0x400FDFD4 // Flash DMA Starting Address
#define FLASH_RVP 0x400FE0D4 // Reset Vector Pointer
#define FLASH_RMCTL 0x400FE0F0 // ROM Control
#define FLASH_BOOTCFG 0x400FE1D0 // Boot Configuration
#define FLASH_USERREG0 0x400FE1E0 // User Register 0
#define FLASH_USERREG1 0x400FE1E4 // User Register 1
#define FLASH_USERREG2 0x400FE1E8 // User Register 2
#define FLASH_USERREG3 0x400FE1EC // User Register 3
#define FLASH_FMPRE0 0x400FE200 // Flash Memory Protection Read
// Enable 0
#define FLASH_FMPRE1 0x400FE204 // Flash Memory Protection Read
// Enable 1
#define FLASH_FMPRE2 0x400FE208 // Flash Memory Protection Read
// Enable 2
#define FLASH_FMPRE3 0x400FE20C // Flash Memory Protection Read
// Enable 3
#define FLASH_FMPRE4 0x400FE210 // Flash Memory Protection Read
// Enable 4
#define FLASH_FMPRE5 0x400FE214 // Flash Memory Protection Read
// Enable 5
#define FLASH_FMPRE6 0x400FE218 // Flash Memory Protection Read
// Enable 6
#define FLASH_FMPRE7 0x400FE21C // Flash Memory Protection Read
// Enable 7
#define FLASH_FMPRE8 0x400FE220 // Flash Memory Protection Read
// Enable 8
#define FLASH_FMPRE9 0x400FE224 // Flash Memory Protection Read
// Enable 9
#define FLASH_FMPRE10 0x400FE228 // Flash Memory Protection Read
// Enable 10
#define FLASH_FMPRE11 0x400FE22C // Flash Memory Protection Read
// Enable 11
#define FLASH_FMPRE12 0x400FE230 // Flash Memory Protection Read
// Enable 12
#define FLASH_FMPRE13 0x400FE234 // Flash Memory Protection Read
// Enable 13
#define FLASH_FMPRE14 0x400FE238 // Flash Memory Protection Read
// Enable 14
#define FLASH_FMPRE15 0x400FE23C // Flash Memory Protection Read
// Enable 15
#define FLASH_FMPPE0 0x400FE400 // Flash Memory Protection Program
// Enable 0
#define FLASH_FMPPE1 0x400FE404 // Flash Memory Protection Program
// Enable 1
#define FLASH_FMPPE2 0x400FE408 // Flash Memory Protection Program
// Enable 2
#define FLASH_FMPPE3 0x400FE40C // Flash Memory Protection Program
// Enable 3
#define FLASH_FMPPE4 0x400FE410 // Flash Memory Protection Program
// Enable 4
#define FLASH_FMPPE5 0x400FE414 // Flash Memory Protection Program
// Enable 5
#define FLASH_FMPPE6 0x400FE418 // Flash Memory Protection Program
// Enable 6
#define FLASH_FMPPE7 0x400FE41C // Flash Memory Protection Program
// Enable 7
#define FLASH_FMPPE8 0x400FE420 // Flash Memory Protection Program
// Enable 8
#define FLASH_FMPPE9 0x400FE424 // Flash Memory Protection Program
// Enable 9
#define FLASH_FMPPE10 0x400FE428 // Flash Memory Protection Program
// Enable 10
#define FLASH_FMPPE11 0x400FE42C // Flash Memory Protection Program
// Enable 11
#define FLASH_FMPPE12 0x400FE430 // Flash Memory Protection Program
// Enable 12
#define FLASH_FMPPE13 0x400FE434 // Flash Memory Protection Program
// Enable 13
#define FLASH_FMPPE14 0x400FE438 // Flash Memory Protection Program
// Enable 14
#define FLASH_FMPPE15 0x400FE43C // Flash Memory Protection Program
// Enable 15
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMA register.
//
//*****************************************************************************
#define FLASH_FMA_OFFSET_M 0x000FFFFF // Address Offset
#define FLASH_FMA_OFFSET_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMD register.
//
//*****************************************************************************
#define FLASH_FMD_DATA_M 0xFFFFFFFF // Data Value
#define FLASH_FMD_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC register.
//
//*****************************************************************************
#define FLASH_FMC_WRKEY 0xA4420000 // FLASH write key
#define FLASH_FMC_COMT 0x00000008 // Commit Register Value
#define FLASH_FMC_MERASE 0x00000004 // Mass Erase Flash Memory
#define FLASH_FMC_ERASE 0x00000002 // Erase a Page of Flash Memory
#define FLASH_FMC_WRITE 0x00000001 // Write a Word into Flash Memory
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCRIS register.
//
//*****************************************************************************
#define FLASH_FCRIS_PROGRIS 0x00002000 // Program Verify Error Raw
// Interrupt Status
#define FLASH_FCRIS_ERRIS 0x00000800 // Erase Verify Error Raw Interrupt
// Status
#define FLASH_FCRIS_INVDRIS 0x00000400 // Invalid Data Raw Interrupt
// Status
#define FLASH_FCRIS_VOLTRIS 0x00000200 // Pump Voltage Raw Interrupt
// Status
#define FLASH_FCRIS_ERIS 0x00000004 // EEPROM Raw Interrupt Status
#define FLASH_FCRIS_PRIS 0x00000002 // Programming Raw Interrupt Status
#define FLASH_FCRIS_ARIS 0x00000001 // Access Raw Interrupt Status
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCIM register.
//
//*****************************************************************************
#define FLASH_FCIM_PROGMASK 0x00002000 // PROGVER Interrupt Mask
#define FLASH_FCIM_ERMASK 0x00000800 // ERVER Interrupt Mask
#define FLASH_FCIM_INVDMASK 0x00000400 // Invalid Data Interrupt Mask
#define FLASH_FCIM_VOLTMASK 0x00000200 // VOLT Interrupt Mask
#define FLASH_FCIM_EMASK 0x00000004 // EEPROM Interrupt Mask
#define FLASH_FCIM_PMASK 0x00000002 // Programming Interrupt Mask
#define FLASH_FCIM_AMASK 0x00000001 // Access Interrupt Mask
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FCMISC register.
//
//*****************************************************************************
#define FLASH_FCMISC_PROGMISC 0x00002000 // PROGVER Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_ERMISC 0x00000800 // ERVER Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_INVDMISC 0x00000400 // Invalid Data Masked Interrupt
// Status and Clear
#define FLASH_FCMISC_VOLTMISC 0x00000200 // VOLT Masked Interrupt Status and
// Clear
#define FLASH_FCMISC_EMISC 0x00000004 // EEPROM Masked Interrupt Status
// and Clear
#define FLASH_FCMISC_PMISC 0x00000002 // Programming Masked Interrupt
// Status and Clear
#define FLASH_FCMISC_AMISC 0x00000001 // Access Masked Interrupt Status
// and Clear
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMC2 register.
//
//*****************************************************************************
#define FLASH_FMC2_WRKEY 0xA4420000 // FLASH write key
#define FLASH_FMC2_WRBUF 0x00000001 // Buffered Flash Memory Write
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBVAL register.
//
//*****************************************************************************
#define FLASH_FWBVAL_FWB_M 0xFFFFFFFF // Flash Memory Write Buffer
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FLPEKEY register.
//
//*****************************************************************************
#define FLASH_FLPEKEY_PEKEY_M 0x0000FFFF // Key Value
#define FLASH_FLPEKEY_PEKEY_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FWBN register.
//
//*****************************************************************************
#define FLASH_FWBN_DATA_M 0xFFFFFFFF // Data
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_PP register.
//
//*****************************************************************************
#define FLASH_PP_PFC 0x40000000 // Prefetch Buffer Mode
#define FLASH_PP_FMM 0x20000000 // Flash Mirror Mode
#define FLASH_PP_DFA 0x10000000 // DMA Flash Access
#define FLASH_PP_EESS_M 0x00780000 // EEPROM Sector Size of the
// physical bank
#define FLASH_PP_EESS_1KB 0x00000000 // 1 KB
#define FLASH_PP_EESS_2KB 0x00080000 // 2 KB
#define FLASH_PP_EESS_4KB 0x00100000 // 4 KB
#define FLASH_PP_EESS_8KB 0x00180000 // 8 KB
#define FLASH_PP_MAINSS_M 0x00070000 // Flash Sector Size of the
// physical bank
#define FLASH_PP_MAINSS_1KB 0x00000000 // 1 KB
#define FLASH_PP_MAINSS_2KB 0x00010000 // 2 KB
#define FLASH_PP_MAINSS_4KB 0x00020000 // 4 KB
#define FLASH_PP_MAINSS_8KB 0x00030000 // 8 KB
#define FLASH_PP_MAINSS_16KB 0x00040000 // 16 KB
#define FLASH_PP_SIZE_M 0x0000FFFF // Flash Size
#define FLASH_PP_SIZE_512KB 0x000000FF // 512 KB of Flash
#define FLASH_PP_SIZE_1MB 0x000001FF // 1024 KB of Flash
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FSIZE register.
//
//*****************************************************************************
#define FLASH_FSIZE_SIZE_M 0x0000FFFF // Flash Size
#define FLASH_FSIZE_SIZE_32KB 0x0000000F // 32 KB of Flash
#define FLASH_FSIZE_SIZE_64KB 0x0000001F // 64 KB of Flash
#define FLASH_FSIZE_SIZE_128KB 0x0000003F // 128 KB of Flash
#define FLASH_FSIZE_SIZE_256KB 0x0000007F // 256 KB of Flash
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_SSIZE register.
//
//*****************************************************************************
#define FLASH_SSIZE_SIZE_M 0x0000FFFF // SRAM Size
#define FLASH_SSIZE_SIZE_12KB 0x0000002F // 12 KB of SRAM
#define FLASH_SSIZE_SIZE_24KB 0x0000005F // 24 KB of SRAM
#define FLASH_SSIZE_SIZE_32KB 0x0000007F // 32 KB of SRAM
#define FLASH_SSIZE_SIZE_256KB 0x000003FF // 256 KB of SRAM
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_CONF register.
//
//*****************************************************************************
#define FLASH_CONF_FMME 0x40000000 // Flash Mirror Mode Enable
#define FLASH_CONF_SPFE 0x20000000 // Single Prefetch Mode Enable
#define FLASH_CONF_CLRTV 0x00100000 // Clear Valid Tags
#define FLASH_CONF_FPFON 0x00020000 // Force Prefetch On
#define FLASH_CONF_FPFOFF 0x00010000 // Force Prefetch Off
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_ROMSWMAP register.
//
//*****************************************************************************
#define FLASH_ROMSWMAP_SAFERTOS 0x00000001 // SafeRTOS Present
#define FLASH_ROMSWMAP_SW0EN_M 0x00000003 // ROM SW Region 0 Availability
#define FLASH_ROMSWMAP_SW0EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW0EN_CORE \
0x00000001 // Region available to core
#define FLASH_ROMSWMAP_SW1EN_M 0x0000000C // ROM SW Region 1 Availability
#define FLASH_ROMSWMAP_SW1EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW1EN_CORE \
0x00000004 // Region available to core
#define FLASH_ROMSWMAP_SW2EN_M 0x00000030 // ROM SW Region 2 Availability
#define FLASH_ROMSWMAP_SW2EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW2EN_CORE \
0x00000010 // Region available to core
#define FLASH_ROMSWMAP_SW3EN_M 0x000000C0 // ROM SW Region 3 Availability
#define FLASH_ROMSWMAP_SW3EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW3EN_CORE \
0x00000040 // Region available to core
#define FLASH_ROMSWMAP_SW4EN_M 0x00000300 // ROM SW Region 4 Availability
#define FLASH_ROMSWMAP_SW4EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW4EN_CORE \
0x00000100 // Region available to core
#define FLASH_ROMSWMAP_SW5EN_M 0x00000C00 // ROM SW Region 5 Availability
#define FLASH_ROMSWMAP_SW5EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW5EN_CORE \
0x00000400 // Region available to core
#define FLASH_ROMSWMAP_SW6EN_M 0x00003000 // ROM SW Region 6 Availability
#define FLASH_ROMSWMAP_SW6EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW6EN_CORE \
0x00001000 // Region available to core
#define FLASH_ROMSWMAP_SW7EN_M 0x0000C000 // ROM SW Region 7 Availability
#define FLASH_ROMSWMAP_SW7EN_NOTVIS \
0x00000000 // Software region not available to
// the core
#define FLASH_ROMSWMAP_SW7EN_CORE \
0x00004000 // Region available to core
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_DMASZ register.
//
//*****************************************************************************
#define FLASH_DMASZ_SIZE_M 0x0003FFFF // uDMA-accessible Memory Size
#define FLASH_DMASZ_SIZE_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_DMAST register.
//
//*****************************************************************************
#define FLASH_DMAST_ADDR_M 0x1FFFF800 // Contains the starting address of
// the flash region accessible by
// uDMA if the FLASHPP register DFA
// bit is set
#define FLASH_DMAST_ADDR_S 11
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_RVP register.
//
//*****************************************************************************
#define FLASH_RVP_RV_M 0xFFFFFFFF // Reset Vector Pointer Address
#define FLASH_RVP_RV_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_RMCTL register.
//
//*****************************************************************************
#define FLASH_RMCTL_BA 0x00000001 // Boot Alias
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_BOOTCFG register.
//
//*****************************************************************************
#define FLASH_BOOTCFG_NW 0x80000000 // Not Written
#define FLASH_BOOTCFG_PORT_M 0x0000E000 // Boot GPIO Port
#define FLASH_BOOTCFG_PORT_A 0x00000000 // Port A
#define FLASH_BOOTCFG_PORT_B 0x00002000 // Port B
#define FLASH_BOOTCFG_PORT_C 0x00004000 // Port C
#define FLASH_BOOTCFG_PORT_D 0x00006000 // Port D
#define FLASH_BOOTCFG_PORT_E 0x00008000 // Port E
#define FLASH_BOOTCFG_PORT_F 0x0000A000 // Port F
#define FLASH_BOOTCFG_PORT_G 0x0000C000 // Port G
#define FLASH_BOOTCFG_PORT_H 0x0000E000 // Port H
#define FLASH_BOOTCFG_PIN_M 0x00001C00 // Boot GPIO Pin
#define FLASH_BOOTCFG_PIN_0 0x00000000 // Pin 0
#define FLASH_BOOTCFG_PIN_1 0x00000400 // Pin 1
#define FLASH_BOOTCFG_PIN_2 0x00000800 // Pin 2
#define FLASH_BOOTCFG_PIN_3 0x00000C00 // Pin 3
#define FLASH_BOOTCFG_PIN_4 0x00001000 // Pin 4
#define FLASH_BOOTCFG_PIN_5 0x00001400 // Pin 5
#define FLASH_BOOTCFG_PIN_6 0x00001800 // Pin 6
#define FLASH_BOOTCFG_PIN_7 0x00001C00 // Pin 7
#define FLASH_BOOTCFG_POL 0x00000200 // Boot GPIO Polarity
#define FLASH_BOOTCFG_EN 0x00000100 // Boot GPIO Enable
#define FLASH_BOOTCFG_KEY 0x00000010 // KEY Select
#define FLASH_BOOTCFG_DBG1 0x00000002 // Debug Control 1
#define FLASH_BOOTCFG_DBG0 0x00000001 // Debug Control 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG0 register.
//
//*****************************************************************************
#define FLASH_USERREG0_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG0_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG1 register.
//
//*****************************************************************************
#define FLASH_USERREG1_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG1_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG2 register.
//
//*****************************************************************************
#define FLASH_USERREG2_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG2_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_USERREG3 register.
//
//*****************************************************************************
#define FLASH_USERREG3_DATA_M 0xFFFFFFFF // User Data
#define FLASH_USERREG3_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE8 register.
//
//*****************************************************************************
#define FLASH_FMPRE8_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE8_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE9 register.
//
//*****************************************************************************
#define FLASH_FMPRE9_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE9_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE10 register.
//
//*****************************************************************************
#define FLASH_FMPRE10_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE10_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE11 register.
//
//*****************************************************************************
#define FLASH_FMPRE11_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE11_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE12 register.
//
//*****************************************************************************
#define FLASH_FMPRE12_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE12_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE13 register.
//
//*****************************************************************************
#define FLASH_FMPRE13_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE13_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE14 register.
//
//*****************************************************************************
#define FLASH_FMPRE14_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE14_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPRE15 register.
//
//*****************************************************************************
#define FLASH_FMPRE15_READ_ENABLE_M \
0xFFFFFFFF // Flash Read Enable
#define FLASH_FMPRE15_READ_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE8 register.
//
//*****************************************************************************
#define FLASH_FMPPE8_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE8_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE9 register.
//
//*****************************************************************************
#define FLASH_FMPPE9_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE9_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE10 register.
//
//*****************************************************************************
#define FLASH_FMPPE10_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE10_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE11 register.
//
//*****************************************************************************
#define FLASH_FMPPE11_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE11_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE12 register.
//
//*****************************************************************************
#define FLASH_FMPPE12_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE12_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE13 register.
//
//*****************************************************************************
#define FLASH_FMPPE13_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE13_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE14 register.
//
//*****************************************************************************
#define FLASH_FMPPE14_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE14_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the bit fields in the FLASH_FMPPE15 register.
//
//*****************************************************************************
#define FLASH_FMPPE15_PROG_ENABLE_M \
0xFFFFFFFF // Flash Programming Enable
#define FLASH_FMPPE15_PROG_ENABLE_S \
0
//*****************************************************************************
//
// The following are defines for the erase size of the FLASH block that is
// erased by an erase operation, and the protect size is the size of the FLASH
// block that is protected by each protection register.
//
//*****************************************************************************
#define FLASH_PROTECT_SIZE 0x00000800
#define FLASH_ERASE_SIZE 0x00000400
#endif // __HW_FLASH_H__