1383 lines
46 KiB
C
1383 lines
46 KiB
C
//*****************************************************************************
|
|
//
|
|
// udma.c - Driver for the micro-DMA controller.
|
|
//
|
|
// Copyright (c) 2007-2017 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.1.4.178 of the Tiva Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup udma_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include "inc/hw_sysctl.h"
|
|
#include "inc/hw_types.h"
|
|
#include "inc/hw_udma.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/interrupt.h"
|
|
#include "driverlib/udma.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the uDMA controller for use.
|
|
//!
|
|
//! This function enables the uDMA controller. The uDMA controller must be
|
|
//! enabled before it can be configured and used.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAEnable(void)
|
|
{
|
|
//
|
|
// Set the master enable bit in the config register.
|
|
//
|
|
HWREG(UDMA_CFG) = UDMA_CFG_MASTEN;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the uDMA controller for use.
|
|
//!
|
|
//! This function disables the uDMA controller. Once disabled, the uDMA
|
|
//! controller cannot operate until re-enabled with uDMAEnable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMADisable(void)
|
|
{
|
|
//
|
|
// Clear the master enable bit in the config register.
|
|
//
|
|
HWREG(UDMA_CFG) = 0;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the uDMA error status.
|
|
//!
|
|
//! This function returns the uDMA error status. It should be called from
|
|
//! within the uDMA error interrupt handler to determine if a uDMA error
|
|
//! occurred.
|
|
//!
|
|
//! \return Returns non-zero if a uDMA error is pending.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
uDMAErrorStatusGet(void)
|
|
{
|
|
//
|
|
// Return the uDMA error status.
|
|
//
|
|
return(HWREG(UDMA_ERRCLR));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the uDMA error interrupt.
|
|
//!
|
|
//! This function clears a pending uDMA error interrupt. This function should
|
|
//! be called from within the uDMA error interrupt handler to clear the
|
|
//! interrupt.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAErrorStatusClear(void)
|
|
{
|
|
//
|
|
// Clear the uDMA error interrupt.
|
|
//
|
|
HWREG(UDMA_ERRCLR) = 1;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables a uDMA channel for operation.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel number to enable.
|
|
//!
|
|
//! This function enables a specific uDMA channel for use. This function must
|
|
//! be used to enable a channel before it can be used to perform a uDMA
|
|
//! transfer.
|
|
//!
|
|
//! When a uDMA transfer is completed, the channel is automatically disabled by
|
|
//! the uDMA controller. Therefore, this function should be called prior to
|
|
//! starting up any new transfer.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelEnable(uint32_t ui32ChannelNum)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
|
|
//
|
|
// Set the bit for this channel in the enable set register.
|
|
//
|
|
HWREG(UDMA_ENASET) = 1 << (ui32ChannelNum & 0x1f);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables a uDMA channel for operation.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel number to disable.
|
|
//!
|
|
//! This function disables a specific uDMA channel. Once disabled, a channel
|
|
//! cannot respond to uDMA transfer requests until re-enabled via
|
|
//! uDMAChannelEnable().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelDisable(uint32_t ui32ChannelNum)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
|
|
//
|
|
// Set the bit for this channel in the enable clear register.
|
|
//
|
|
HWREG(UDMA_ENACLR) = 1 << (ui32ChannelNum & 0x1f);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Checks if a uDMA channel is enabled for operation.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel number to check.
|
|
//!
|
|
//! This function checks to see if a specific uDMA channel is enabled. This
|
|
//! function can be used to check the status of a transfer, as the channel is
|
|
//! automatically disabled at the end of a transfer.
|
|
//!
|
|
//! \return Returns \b true if the channel is enabled, \b false if disabled.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
uDMAChannelIsEnabled(uint32_t ui32ChannelNum)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
|
|
//
|
|
// AND the specified channel bit with the enable register and return the
|
|
// result.
|
|
//
|
|
return((HWREG(UDMA_ENASET) & (1 << (ui32ChannelNum & 0x1f))) ? true :
|
|
false);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the base address for the channel control table.
|
|
//!
|
|
//! \param psControlTable is a pointer to the 1024-byte-aligned base address
|
|
//! of the uDMA channel control table.
|
|
//!
|
|
//! This function configures the base address of the channel control table.
|
|
//! This table resides in system memory and holds control information for each
|
|
//! uDMA channel. The table must be aligned on a 1024-byte boundary. The base
|
|
//! address must be configured before any of the channel functions can be used.
|
|
//!
|
|
//! The size of the channel control table depends on the number of uDMA
|
|
//! channels and the transfer modes that are used. Refer to the introductory
|
|
//! text and the microcontroller datasheet for more information about the
|
|
//! channel control table.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAControlBaseSet(void *psControlTable)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(((uint32_t)psControlTable & ~0x3FF) ==
|
|
(uint32_t)psControlTable);
|
|
ASSERT((uint32_t)psControlTable >= 0x20000000);
|
|
|
|
//
|
|
// Program the base address into the register.
|
|
//
|
|
HWREG(UDMA_CTLBASE) = (uint32_t)psControlTable;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the base address for the channel control table.
|
|
//!
|
|
//! This function gets the base address of the channel control table. This
|
|
//! table resides in system memory and holds control information for each uDMA
|
|
//! channel.
|
|
//!
|
|
//! \return Returns a pointer to the base address of the channel control table.
|
|
//
|
|
//*****************************************************************************
|
|
void *
|
|
uDMAControlBaseGet(void)
|
|
{
|
|
//
|
|
// Read the current value of the control base register and return it to
|
|
// the caller.
|
|
//
|
|
return((void *)HWREG(UDMA_CTLBASE));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the base address for the channel control table alternate structures.
|
|
//!
|
|
//! This function gets the base address of the second half of the channel
|
|
//! control table that holds the alternate control structures for each channel.
|
|
//!
|
|
//! \return Returns a pointer to the base address of the second half of the
|
|
//! channel control table.
|
|
//
|
|
//*****************************************************************************
|
|
void *
|
|
uDMAControlAlternateBaseGet(void)
|
|
{
|
|
//
|
|
// Read the current value of the control base register and return it to
|
|
// the caller.
|
|
//
|
|
return((void *)HWREG(UDMA_ALTBASE));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Requests a uDMA channel to start a transfer.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel number on which to request a uDMA
|
|
//! transfer.
|
|
//!
|
|
//! This function allows software to request a uDMA channel to begin a
|
|
//! transfer. This function could be used for performing a memory-to-memory
|
|
//! transfer, or if for some reason a transfer needs to be initiated by
|
|
//! software instead of the peripheral associated with that channel.
|
|
//!
|
|
//! \note If the channel is \b UDMA_CHANNEL_SW and interrupts are used, then
|
|
//! the completion is signaled on the uDMA dedicated interrupt. If a
|
|
//! peripheral channel is used, then the completion is signaled on the
|
|
//! peripheral's interrupt.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelRequest(uint32_t ui32ChannelNum)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
|
|
//
|
|
// Set the bit for this channel in the software uDMA request register.
|
|
//
|
|
HWREG(UDMA_SWREQ) = 1 << (ui32ChannelNum & 0x1f);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables attributes of a uDMA channel.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel to configure.
|
|
//! \param ui32Attr is a combination of attributes for the channel.
|
|
//!
|
|
//! This function is used to enable attributes of a uDMA channel.
|
|
//!
|
|
//! The \e ui32Attr parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only burst
|
|
//! mode.
|
|
//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure
|
|
//! for this channel (it is very unlikely that this flag should be used).
|
|
//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority.
|
|
//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the
|
|
//! peripheral for this channel.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelAttributeEnable(uint32_t ui32ChannelNum, uint32_t ui32Attr)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
ASSERT((ui32Attr & ~(UDMA_ATTR_USEBURST | UDMA_ATTR_ALTSELECT |
|
|
UDMA_ATTR_HIGH_PRIORITY | UDMA_ATTR_REQMASK)) == 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelNum parameter, extract just the channel number
|
|
// from this parameter.
|
|
//
|
|
ui32ChannelNum &= 0x1f;
|
|
|
|
//
|
|
// Set the useburst bit for this channel if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_USEBURST)
|
|
{
|
|
HWREG(UDMA_USEBURSTSET) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Set the alternate control select bit for this channel,
|
|
// if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_ALTSELECT)
|
|
{
|
|
HWREG(UDMA_ALTSET) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Set the high priority bit for this channel, if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_HIGH_PRIORITY)
|
|
{
|
|
HWREG(UDMA_PRIOSET) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Set the request mask bit for this channel, if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_REQMASK)
|
|
{
|
|
HWREG(UDMA_REQMASKSET) = 1 << ui32ChannelNum;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables attributes of a uDMA channel.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel to configure.
|
|
//! \param ui32Attr is a combination of attributes for the channel.
|
|
//!
|
|
//! This function is used to disable attributes of a uDMA channel.
|
|
//!
|
|
//! The \e ui32Attr parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only burst
|
|
//! mode.
|
|
//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure
|
|
//! for this channel.
|
|
//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority.
|
|
//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the
|
|
//! peripheral for this channel.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelAttributeDisable(uint32_t ui32ChannelNum, uint32_t ui32Attr)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
ASSERT((ui32Attr & ~(UDMA_ATTR_USEBURST | UDMA_ATTR_ALTSELECT |
|
|
UDMA_ATTR_HIGH_PRIORITY | UDMA_ATTR_REQMASK)) == 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelNum parameter, extract just the channel number
|
|
// from this parameter.
|
|
//
|
|
ui32ChannelNum &= 0x1f;
|
|
|
|
//
|
|
// Clear the useburst bit for this channel if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_USEBURST)
|
|
{
|
|
HWREG(UDMA_USEBURSTCLR) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Clear the alternate control select bit for this channel, if set in
|
|
// ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_ALTSELECT)
|
|
{
|
|
HWREG(UDMA_ALTCLR) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Clear the high priority bit for this channel, if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_HIGH_PRIORITY)
|
|
{
|
|
HWREG(UDMA_PRIOCLR) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//
|
|
// Clear the request mask bit for this channel, if set in ui32Config.
|
|
//
|
|
if(ui32Attr & UDMA_ATTR_REQMASK)
|
|
{
|
|
HWREG(UDMA_REQMASKCLR) = 1 << ui32ChannelNum;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the enabled attributes of a uDMA channel.
|
|
//!
|
|
//! \param ui32ChannelNum is the channel to configure.
|
|
//!
|
|
//! This function returns a combination of flags representing the attributes of
|
|
//! the uDMA channel.
|
|
//!
|
|
//! \return Returns the logical OR of the attributes of the uDMA channel, which
|
|
//! can be any of the following:
|
|
//! - \b UDMA_ATTR_USEBURST is used to restrict transfers to use only burst
|
|
//! mode.
|
|
//! - \b UDMA_ATTR_ALTSELECT is used to select the alternate control structure
|
|
//! for this channel.
|
|
//! - \b UDMA_ATTR_HIGH_PRIORITY is used to set this channel to high priority.
|
|
//! - \b UDMA_ATTR_REQMASK is used to mask the hardware request signal from the
|
|
//! peripheral for this channel.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
uDMAChannelAttributeGet(uint32_t ui32ChannelNum)
|
|
{
|
|
uint32_t ui32Attr = 0;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelNum parameter, extract just the channel number
|
|
// from this parameter.
|
|
//
|
|
ui32ChannelNum &= 0x1f;
|
|
|
|
//
|
|
// Check to see if useburst bit is set for this channel.
|
|
//
|
|
if(HWREG(UDMA_USEBURSTSET) & (1 << ui32ChannelNum))
|
|
{
|
|
ui32Attr |= UDMA_ATTR_USEBURST;
|
|
}
|
|
|
|
//
|
|
// Check to see if the alternate control bit is set for this channel.
|
|
//
|
|
if(HWREG(UDMA_ALTSET) & (1 << ui32ChannelNum))
|
|
{
|
|
ui32Attr |= UDMA_ATTR_ALTSELECT;
|
|
}
|
|
|
|
//
|
|
// Check to see if the high priority bit is set for this channel.
|
|
//
|
|
if(HWREG(UDMA_PRIOSET) & (1 << ui32ChannelNum))
|
|
{
|
|
ui32Attr |= UDMA_ATTR_HIGH_PRIORITY;
|
|
}
|
|
|
|
//
|
|
// Check to see if the request mask bit is set for this channel.
|
|
//
|
|
if(HWREG(UDMA_REQMASKSET) & (1 << ui32ChannelNum))
|
|
{
|
|
ui32Attr |= UDMA_ATTR_REQMASK;
|
|
}
|
|
|
|
//
|
|
// Return the configuration flags.
|
|
//
|
|
return(ui32Attr);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the control parameters for a uDMA channel control structure.
|
|
//!
|
|
//! \param ui32ChannelStructIndex is the logical OR of the uDMA channel number
|
|
//! with \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT.
|
|
//! \param ui32Control is logical OR of several control values to set the
|
|
//! control parameters for the channel.
|
|
//!
|
|
//! This function is used to set control parameters for a uDMA transfer. These
|
|
//! parameters are typically not changed often.
|
|
//!
|
|
//! The \e ui32ChannelStructIndex parameter should be the logical OR of the
|
|
//! channel number with one of \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to
|
|
//! choose whether the primary or alternate data structure is used.
|
|
//!
|
|
//! The \e ui32Control parameter is the logical OR of five values: the data
|
|
//! size, the source address increment, the destination address increment, the
|
|
//! arbitration size, and the use burst flag. The choices available for each
|
|
//! of these values is described below.
|
|
//!
|
|
//! Choose the data size from one of \b UDMA_SIZE_8, \b UDMA_SIZE_16, or
|
|
//! \b UDMA_SIZE_32 to select a data size of 8, 16, or 32 bits.
|
|
//!
|
|
//! Choose the source address increment from one of \b UDMA_SRC_INC_8,
|
|
//! \b UDMA_SRC_INC_16, \b UDMA_SRC_INC_32, or \b UDMA_SRC_INC_NONE to select
|
|
//! an address increment of 8-bit bytes, 16-bit half-words, 32-bit words, or
|
|
//! to select non-incrementing.
|
|
//!
|
|
//! Choose the destination address increment from one of \b UDMA_DST_INC_8,
|
|
//! \b UDMA_DST_INC_16, \b UDMA_DST_INC_32, or \b UDMA_DST_INC_NONE to select
|
|
//! an address increment of 8-bit bytes, 16-bit half-words, 32-bit words, or
|
|
//! to select non-incrementing.
|
|
//!
|
|
//! The arbitration size determines how many items are transferred before
|
|
//! the uDMA controller re-arbitrates for the bus. Choose the arbitration size
|
|
//! from one of \b UDMA_ARB_1, \b UDMA_ARB_2, \b UDMA_ARB_4, \b UDMA_ARB_8,
|
|
//! through \b UDMA_ARB_1024 to select the arbitration size from 1 to 1024
|
|
//! items, in powers of 2.
|
|
//!
|
|
//! The value \b UDMA_NEXT_USEBURST is used to force the channel to only
|
|
//! respond to burst requests at the tail end of a scatter-gather transfer.
|
|
//!
|
|
//! \note The address increment cannot be smaller than the data size.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelControlSet(uint32_t ui32ChannelStructIndex, uint32_t ui32Control)
|
|
{
|
|
tDMAControlTable *psCtl;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelStructIndex & 0xffff) < 64);
|
|
ASSERT(HWREG(UDMA_CTLBASE) != 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelStructIndex parameter, extract just the channel
|
|
// index from this parameter.
|
|
//
|
|
ui32ChannelStructIndex &= 0x3f;
|
|
|
|
//
|
|
// Get the base address of the control table.
|
|
//
|
|
psCtl = (tDMAControlTable *)HWREG(UDMA_CTLBASE);
|
|
|
|
//
|
|
// Get the current control word value and mask off the fields to be
|
|
// changed, then OR in the new settings.
|
|
//
|
|
psCtl[ui32ChannelStructIndex].ui32Control =
|
|
((psCtl[ui32ChannelStructIndex].ui32Control &
|
|
~(UDMA_CHCTL_DSTINC_M |
|
|
UDMA_CHCTL_DSTSIZE_M |
|
|
UDMA_CHCTL_SRCINC_M |
|
|
UDMA_CHCTL_SRCSIZE_M |
|
|
UDMA_CHCTL_ARBSIZE_M |
|
|
UDMA_CHCTL_NXTUSEBURST)) |
|
|
ui32Control);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the transfer parameters for a uDMA channel control structure.
|
|
//!
|
|
//! \param ui32ChannelStructIndex is the logical OR of the uDMA channel number
|
|
//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT.
|
|
//! \param ui32Mode is the type of uDMA transfer.
|
|
//! \param pvSrcAddr is the source address for the transfer.
|
|
//! \param pvDstAddr is the destination address for the transfer.
|
|
//! \param ui32TransferSize is the number of data items to transfer.
|
|
//!
|
|
//! This function is used to configure the parameters for a uDMA transfer.
|
|
//! These parameters are not typically changed often. The function
|
|
//! uDMAChannelControlSet() MUST be called at least once for this channel prior
|
|
//! to calling this function.
|
|
//!
|
|
//! The \e ui32ChannelStructIndex parameter should be the logical OR of the
|
|
//! channel number with one of \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT to
|
|
//! choose whether the primary or alternate data structure is used.
|
|
//!
|
|
//! The \e ui32Mode parameter should be one of the following values:
|
|
//!
|
|
//! - \b UDMA_MODE_STOP stops the uDMA transfer. The controller sets the mode
|
|
//! to this value at the end of a transfer.
|
|
//! - \b UDMA_MODE_BASIC to perform a basic transfer based on request.
|
|
//! - \b UDMA_MODE_AUTO to perform a transfer that always completes once
|
|
//! started even if the request is removed.
|
|
//! - \b UDMA_MODE_PINGPONG to set up a transfer that switches between the
|
|
//! primary and alternate control structures for the channel. This mode
|
|
//! allows use of ping-pong buffering for uDMA transfers.
|
|
//! - \b UDMA_MODE_MEM_SCATTER_GATHER to set up a memory scatter-gather
|
|
//! transfer.
|
|
//! - \b UDMA_MODE_PER_SCATTER_GATHER to set up a peripheral scatter-gather
|
|
//! transfer.
|
|
//!
|
|
//! The \e pvSrcAddr and \e pvDstAddr parameters are pointers to the first
|
|
//! location of the data to be transferred. These addresses should be aligned
|
|
//! according to the item size. The compiler takes care of this alignment if
|
|
//! the pointers are pointing to storage of the appropriate data type.
|
|
//!
|
|
//! The \e ui32TransferSize parameter is the number of data items, not the
|
|
//! number of bytes.
|
|
//!
|
|
//! The two scatter-gather modes, memory and peripheral, are actually different
|
|
//! depending on whether the primary or alternate control structure is
|
|
//! selected. This function looks for the \b UDMA_PRI_SELECT and
|
|
//! \b UDMA_ALT_SELECT flag along with the channel number and sets the
|
|
//! scatter-gather mode as appropriate for the primary or alternate control
|
|
//! structure.
|
|
//!
|
|
//! The channel must also be enabled using uDMAChannelEnable() after calling
|
|
//! this function. The transfer does not begin until the channel has been
|
|
//! configured and enabled. Note that the channel is automatically disabled
|
|
//! after the transfer is completed, meaning that uDMAChannelEnable() must be
|
|
//! called again after setting up the next transfer.
|
|
//!
|
|
//! \note Great care must be taken to not modify a channel control structure
|
|
//! that is in use or else the results are unpredictable, including the
|
|
//! possibility of undesired data transfers to or from memory or peripherals.
|
|
//! For BASIC and AUTO modes, it is safe to make changes when the channel is
|
|
//! disabled, or the uDMAChannelModeGet() returns \b UDMA_MODE_STOP. For
|
|
//! PINGPONG or one of the SCATTER_GATHER modes, it is safe to modify the
|
|
//! primary or alternate control structure only when the other is being used.
|
|
//! The uDMAChannelModeGet() function returns \b UDMA_MODE_STOP when a
|
|
//! channel control structure is inactive and safe to modify.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelTransferSet(uint32_t ui32ChannelStructIndex, uint32_t ui32Mode,
|
|
void *pvSrcAddr, void *pvDstAddr,
|
|
uint32_t ui32TransferSize)
|
|
{
|
|
tDMAControlTable *psControlTable;
|
|
uint32_t ui32Control;
|
|
uint32_t ui32Inc;
|
|
uint32_t ui32BufferBytes;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelStructIndex & 0xffff) < 64);
|
|
ASSERT(HWREG(UDMA_CTLBASE) != 0);
|
|
ASSERT(ui32Mode <= UDMA_MODE_PER_SCATTER_GATHER);
|
|
ASSERT((uint32_t)pvSrcAddr >= 0x20000000);
|
|
ASSERT((uint32_t)pvDstAddr >= 0x20000000);
|
|
ASSERT((ui32TransferSize != 0) && (ui32TransferSize <= 1024));
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelStructIndex parameter, extract just the channel
|
|
// index from this parameter.
|
|
//
|
|
ui32ChannelStructIndex &= 0x3f;
|
|
|
|
//
|
|
// Get the base address of the control table.
|
|
//
|
|
psControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE);
|
|
|
|
//
|
|
// Get the current control word value and mask off the mode and size
|
|
// fields.
|
|
//
|
|
ui32Control = (psControlTable[ui32ChannelStructIndex].ui32Control &
|
|
~(UDMA_CHCTL_XFERSIZE_M | UDMA_CHCTL_XFERMODE_M));
|
|
|
|
//
|
|
// Adjust the mode if the alt control structure is selected.
|
|
//
|
|
if(ui32ChannelStructIndex & UDMA_ALT_SELECT)
|
|
{
|
|
if((ui32Mode == UDMA_MODE_MEM_SCATTER_GATHER) ||
|
|
(ui32Mode == UDMA_MODE_PER_SCATTER_GATHER))
|
|
{
|
|
ui32Mode |= UDMA_MODE_ALT_SELECT;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Set the transfer size and mode in the control word (but don't write the
|
|
// control word yet as it could kick off a transfer).
|
|
//
|
|
ui32Control |= ui32Mode | ((ui32TransferSize - 1) << 4);
|
|
|
|
//
|
|
// Get the address increment value for the source, from the control word.
|
|
//
|
|
ui32Inc = (ui32Control & UDMA_CHCTL_SRCINC_M);
|
|
|
|
//
|
|
// Compute the ending source address of the transfer. If the source
|
|
// increment is set to none, then the ending address is the same as the
|
|
// beginning.
|
|
//
|
|
if(ui32Inc != UDMA_SRC_INC_NONE)
|
|
{
|
|
ui32Inc = ui32Inc >> 26;
|
|
ui32BufferBytes = ui32TransferSize << ui32Inc;
|
|
pvSrcAddr = (void *)((uint32_t)pvSrcAddr + ui32BufferBytes - 1);
|
|
}
|
|
|
|
//
|
|
// Load the source ending address into the control block.
|
|
//
|
|
psControlTable[ui32ChannelStructIndex].pvSrcEndAddr = pvSrcAddr;
|
|
|
|
//
|
|
// Get the address increment value for the destination, from the control
|
|
// word.
|
|
//
|
|
ui32Inc = ui32Control & UDMA_CHCTL_DSTINC_M;
|
|
|
|
//
|
|
// Compute the ending destination address of the transfer. If the
|
|
// destination increment is set to none, then the ending address is the
|
|
// same as the beginning.
|
|
//
|
|
if(ui32Inc != UDMA_DST_INC_NONE)
|
|
{
|
|
//
|
|
// There is a special case if this is setting up a scatter-gather
|
|
// transfer. The destination pointer must point to the end of
|
|
// the alternate structure for this channel instead of calculating
|
|
// the end of the buffer in the normal way.
|
|
//
|
|
if((ui32Mode == UDMA_MODE_MEM_SCATTER_GATHER) ||
|
|
(ui32Mode == UDMA_MODE_PER_SCATTER_GATHER))
|
|
{
|
|
pvDstAddr =
|
|
(void *)&psControlTable[ui32ChannelStructIndex |
|
|
UDMA_ALT_SELECT].ui32Spare;
|
|
}
|
|
//
|
|
// Not a scatter-gather transfer, calculate end pointer normally.
|
|
//
|
|
else
|
|
{
|
|
ui32Inc = ui32Inc >> 30;
|
|
ui32BufferBytes = ui32TransferSize << ui32Inc;
|
|
pvDstAddr = (void *)((uint32_t)pvDstAddr + ui32BufferBytes - 1);
|
|
}
|
|
}
|
|
|
|
//
|
|
// Load the destination ending address into the control block.
|
|
//
|
|
psControlTable[ui32ChannelStructIndex].pvDstEndAddr = pvDstAddr;
|
|
|
|
//
|
|
// Write the new control word value.
|
|
//
|
|
psControlTable[ui32ChannelStructIndex].ui32Control = ui32Control;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures a uDMA channel for scatter-gather mode.
|
|
//!
|
|
//! \param ui32ChannelNum is the uDMA channel number.
|
|
//! \param ui32TaskCount is the number of scatter-gather tasks to execute.
|
|
//! \param pvTaskList is a pointer to the beginning of the scatter-gather
|
|
//! task list.
|
|
//! \param ui32IsPeriphSG is a flag to indicate it is a peripheral
|
|
//! scatter-gather transfer (else it is memory scatter-gather transfer)
|
|
//!
|
|
//! This function is used to configure a channel for scatter-gather mode.
|
|
//! The caller must have already set up a task list and must pass a pointer to
|
|
//! the start of the task list as the \e pvTaskList parameter. The
|
|
//! \e ui32TaskCount parameter is the count of tasks in the task list, not the
|
|
//! size of the task list. The flag \e bIsPeriphSG should be used to indicate
|
|
//! if scatter-gather should be configured for peripheral or memory
|
|
//! operation.
|
|
//!
|
|
//! \sa uDMATaskStructEntry
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelScatterGatherSet(uint32_t ui32ChannelNum, uint32_t ui32TaskCount,
|
|
void *pvTaskList, uint32_t ui32IsPeriphSG)
|
|
{
|
|
tDMAControlTable *psControlTable;
|
|
tDMAControlTable *psTaskTable;
|
|
|
|
//
|
|
// Check the parameters
|
|
//
|
|
ASSERT((ui32ChannelNum & 0xffff) < 32);
|
|
ASSERT(HWREG(UDMA_CTLBASE) != 0);
|
|
ASSERT(pvTaskList != 0);
|
|
ASSERT(ui32TaskCount <= 1024);
|
|
ASSERT(ui32TaskCount != 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelNum parameter, extract just the channel number
|
|
// from this parameter.
|
|
//
|
|
ui32ChannelNum &= 0x1f;
|
|
|
|
//
|
|
// Get the base address of the control table.
|
|
//
|
|
psControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE);
|
|
|
|
//
|
|
// Get a handy pointer to the task list
|
|
//
|
|
psTaskTable = (tDMAControlTable *)pvTaskList;
|
|
|
|
//
|
|
// Compute the ending address for the source pointer. This address is the
|
|
// last element of the last task in the task table
|
|
//
|
|
psControlTable[ui32ChannelNum].pvSrcEndAddr =
|
|
&psTaskTable[ui32TaskCount - 1].ui32Spare;
|
|
|
|
//
|
|
// Compute the ending address for the destination pointer. This address
|
|
// is the end of the alternate structure for this channel.
|
|
//
|
|
psControlTable[ui32ChannelNum].pvDstEndAddr =
|
|
&psControlTable[ui32ChannelNum | UDMA_ALT_SELECT].ui32Spare;
|
|
|
|
//
|
|
// Compute the control word. Most configurable items are fixed for
|
|
// scatter-gather. Item and increment sizes are all 32-bit and arb
|
|
// size must be 4. The count is the number of items in the task list
|
|
// times 4 (4 words per task).
|
|
//
|
|
psControlTable[ui32ChannelNum].ui32Control =
|
|
(UDMA_CHCTL_DSTINC_32 | UDMA_CHCTL_DSTSIZE_32 |
|
|
UDMA_CHCTL_SRCINC_32 | UDMA_CHCTL_SRCSIZE_32 |
|
|
UDMA_CHCTL_ARBSIZE_4 |
|
|
(((ui32TaskCount * 4) - 1) << UDMA_CHCTL_XFERSIZE_S) |
|
|
(ui32IsPeriphSG ? UDMA_CHCTL_XFERMODE_PER_SG :
|
|
UDMA_CHCTL_XFERMODE_MEM_SG));
|
|
|
|
//
|
|
// Scatter-gather operations can leave the alt bit set. So if doing
|
|
// back to back scatter-gather transfers, the second attempt may not
|
|
// work correctly because the alt bit is set. Therefore, clear the
|
|
// alt bit here to ensure that it is always cleared before a new SG
|
|
// transfer is started.
|
|
//
|
|
HWREG(UDMA_ALTCLR) = 1 << ui32ChannelNum;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current transfer size for a uDMA channel control structure.
|
|
//!
|
|
//! \param ui32ChannelStructIndex is the logical OR of the uDMA channel number
|
|
//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT.
|
|
//!
|
|
//! This function is used to get the uDMA transfer size for a channel. The
|
|
//! transfer size is the number of items to transfer, where the size of an item
|
|
//! might be 8, 16, or 32 bits. If a partial transfer has already occurred,
|
|
//! then the number of remaining items is returned. If the transfer is
|
|
//! complete, then 0 is returned.
|
|
//!
|
|
//! \return Returns the number of items remaining to transfer.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
uDMAChannelSizeGet(uint32_t ui32ChannelStructIndex)
|
|
{
|
|
tDMAControlTable *psControlTable;
|
|
uint32_t ui32Control;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelStructIndex & 0xffff) < 64);
|
|
ASSERT(HWREG(UDMA_CTLBASE) != 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelStructIndex parameter, extract just the channel
|
|
// index from this parameter.
|
|
//
|
|
ui32ChannelStructIndex &= 0x3f;
|
|
|
|
//
|
|
// Get the base address of the control table.
|
|
//
|
|
psControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE);
|
|
|
|
//
|
|
// Get the current control word value and mask off all but the size field
|
|
// and the mode field.
|
|
//
|
|
ui32Control = (psControlTable[ui32ChannelStructIndex].ui32Control &
|
|
(UDMA_CHCTL_XFERSIZE_M | UDMA_CHCTL_XFERMODE_M));
|
|
|
|
//
|
|
// If the size field and mode field are 0 then the transfer is finished
|
|
// and there are no more items to transfer
|
|
//
|
|
if(ui32Control == 0)
|
|
{
|
|
return(0);
|
|
}
|
|
|
|
//
|
|
// Otherwise, if either the size field or more field is non-zero, then
|
|
// not all the items have been transferred.
|
|
//
|
|
else
|
|
{
|
|
//
|
|
// Shift the size field and add one, then return to user.
|
|
//
|
|
return((ui32Control >> 4) + 1);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the transfer mode for a uDMA channel control structure.
|
|
//!
|
|
//! \param ui32ChannelStructIndex is the logical OR of the uDMA channel number
|
|
//! with either \b UDMA_PRI_SELECT or \b UDMA_ALT_SELECT.
|
|
//!
|
|
//! This function is used to get the transfer mode for the uDMA channel and
|
|
//! to query the status of a transfer on a channel. When the transfer is
|
|
//! complete the mode is \b UDMA_MODE_STOP.
|
|
//!
|
|
//! \return Returns the transfer mode of the specified channel and control
|
|
//! structure, which is one of the following values: \b UDMA_MODE_STOP,
|
|
//! \b UDMA_MODE_BASIC, \b UDMA_MODE_AUTO, \b UDMA_MODE_PINGPONG,
|
|
//! \b UDMA_MODE_MEM_SCATTER_GATHER, or \b UDMA_MODE_PER_SCATTER_GATHER.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
uDMAChannelModeGet(uint32_t ui32ChannelStructIndex)
|
|
{
|
|
tDMAControlTable *psControlTable;
|
|
uint32_t ui32Control;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32ChannelStructIndex & 0xffff) < 64);
|
|
ASSERT(HWREG(UDMA_CTLBASE) != 0);
|
|
|
|
//
|
|
// In case a channel selector macro (like UDMA_CH0_USB0EP1RX) was
|
|
// passed as the ui32ChannelStructIndex parameter, extract just the channel
|
|
// index from this parameter.
|
|
//
|
|
ui32ChannelStructIndex &= 0x3f;
|
|
|
|
//
|
|
// Get the base address of the control table.
|
|
//
|
|
psControlTable = (tDMAControlTable *)HWREG(UDMA_CTLBASE);
|
|
|
|
//
|
|
// Get the current control word value and mask off all but the mode field.
|
|
//
|
|
ui32Control = (psControlTable[ui32ChannelStructIndex].ui32Control &
|
|
UDMA_CHCTL_XFERMODE_M);
|
|
|
|
//
|
|
// Check if scatter/gather mode, and if so, mask off the alt bit.
|
|
//
|
|
if(((ui32Control & ~UDMA_MODE_ALT_SELECT) ==
|
|
UDMA_MODE_MEM_SCATTER_GATHER) ||
|
|
((ui32Control & ~UDMA_MODE_ALT_SELECT) == UDMA_MODE_PER_SCATTER_GATHER))
|
|
{
|
|
ui32Control &= ~UDMA_MODE_ALT_SELECT;
|
|
}
|
|
|
|
//
|
|
// Return the mode to the caller.
|
|
//
|
|
return(ui32Control);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for the uDMA controller.
|
|
//!
|
|
//! \param ui32IntChannel identifies which uDMA interrupt is to be registered.
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! interrupt is activated.
|
|
//!
|
|
//! This function registers and enables the handler to be called when the uDMA
|
|
//! controller generates an interrupt. The \e ui32IntChannel parameter should
|
|
//! be one of the following:
|
|
//!
|
|
//! - \b INT_UDMA to register an interrupt handler to process interrupts
|
|
//! from the uDMA software channel (UDMA_CHANNEL_SW)
|
|
//! - \b INT_UDMAERR to register an interrupt handler to process uDMA error
|
|
//! interrupts
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \note The interrupt handler for the uDMA is for transfer completion when
|
|
//! the channel UDMA_CHANNEL_SW is used and for error interrupts. The
|
|
//! interrupts for each peripheral channel are handled through the individual
|
|
//! peripheral interrupt handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAIntRegister(uint32_t ui32IntChannel, void (*pfnHandler)(void))
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(pfnHandler);
|
|
|
|
//
|
|
// Register the interrupt handler.
|
|
//
|
|
IntRegister(ui32IntChannel, pfnHandler);
|
|
|
|
//
|
|
// Enable the memory management fault.
|
|
//
|
|
IntEnable(ui32IntChannel);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters an interrupt handler for the uDMA controller.
|
|
//!
|
|
//! \param ui32IntChannel identifies which uDMA interrupt to unregister.
|
|
//!
|
|
//! This function disables and unregisters the handler to be called for the
|
|
//! specified uDMA interrupt. The \e ui32IntChannel parameter should be one of
|
|
//! \b INT_UDMA or \b INT_UDMAERR as documented for the function
|
|
//! uDMAIntRegister().
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAIntUnregister(uint32_t ui32IntChannel)
|
|
{
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(ui32IntChannel);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(ui32IntChannel);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the uDMA controller channel interrupt status.
|
|
//!
|
|
//! This function is used to get the interrupt status of the uDMA controller.
|
|
//! The returned value is a 32-bit bit mask that indicates which channels are
|
|
//! requesting an interrupt. This function can be used from within an
|
|
//! interrupt handler to determine or confirm which uDMA channel has requested
|
|
//! an interrupt.
|
|
//!
|
|
//! \note This function is only available on devices that have the DMA Channel
|
|
//! Interrupt Status Register (DMACHIS). Please consult the data sheet for
|
|
//! your part.
|
|
//!
|
|
//! \return Returns a 32-bit mask which indicates requesting uDMA channels.
|
|
//! There is a bit for each channel and a 1 indicates that the channel
|
|
//! is requesting an interrupt. Multiple bits can be set.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
uDMAIntStatus(void)
|
|
{
|
|
//
|
|
// Return the value of the uDMA interrupt status register
|
|
//
|
|
return(HWREG(UDMA_CHIS));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears uDMA interrupt status.
|
|
//!
|
|
//! \param ui32ChanMask is a 32-bit mask with one bit for each uDMA channel.
|
|
//!
|
|
//! This function clears bits in the uDMA interrupt status register according
|
|
//! to which bits are set in \e ui32ChanMask. There is one bit for each
|
|
//! channel. If a a bit is set in \e ui32ChanMask, then that corresponding
|
|
//! channel's interrupt status is cleared (if it was set).
|
|
//!
|
|
//! \note This function is only available on devices that have the DMA Channel
|
|
//! Interrupt Status Register (DMACHIS). Please consult the data sheet for
|
|
//! your part. Devices without the DMACHIS register have uDMA done status in
|
|
//! the interrupt registers in the peripheral memory maps.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAIntClear(uint32_t ui32ChanMask)
|
|
{
|
|
//
|
|
// Clear the requested bits in the uDMA interrupt status register
|
|
//
|
|
HWREG(UDMA_CHIS) = ui32ChanMask;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Assigns a peripheral mapping for a uDMA channel.
|
|
//!
|
|
//! \param ui32Mapping is a macro specifying the peripheral assignment for
|
|
//! a channel.
|
|
//!
|
|
//! This function assigns a peripheral mapping to a uDMA channel. It is
|
|
//! used to select which peripheral is used for a uDMA channel. The parameter
|
|
//! \e ui32Mapping should be one of the macros named \b UDMA_CHn_tttt from the
|
|
//! header file \e udma.h. For example, to assign uDMA channel 0 to the
|
|
//! UART2 RX channel, the parameter should be the macro \b UDMA_CH0_UART2RX.
|
|
//!
|
|
//! Please consult the Tiva data sheet for a table showing all the
|
|
//! possible peripheral assignments for the uDMA channels for a particular
|
|
//! device.
|
|
//!
|
|
//! \note This function is only available on devices that have the DMA Channel
|
|
//! Map Select registers (DMACHMAP0-3). Please consult the data sheet for
|
|
//! your part.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelAssign(uint32_t ui32Mapping)
|
|
{
|
|
uint32_t ui32MapReg;
|
|
uint_fast8_t ui8MapShift;
|
|
uint_fast8_t ui8ChannelNum;
|
|
|
|
//
|
|
// Check the parameters
|
|
//
|
|
ASSERT((ui32Mapping & 0xffffff00) < 0x00090000);
|
|
|
|
//
|
|
// Extract the channel number and map encoding value from the parameter.
|
|
//
|
|
ui8ChannelNum = ui32Mapping & 0xff;
|
|
ui32Mapping = ui32Mapping >> 16;
|
|
|
|
//
|
|
// Find the uDMA channel mapping register and shift value to use for this
|
|
// channel
|
|
//
|
|
ui32MapReg = UDMA_CHMAP0 + (uint32_t)((ui8ChannelNum / 8) * 4);
|
|
ui8MapShift = (ui8ChannelNum % 8) * 4;
|
|
|
|
//
|
|
// Set the channel map encoding for this channel
|
|
//
|
|
HWREG(ui32MapReg) = (HWREG(ui32MapReg) & ~(0xf << ui8MapShift)) |
|
|
ui32Mapping << ui8MapShift;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The following functions are deprecated. Use uDMAChannelAssign() instead
|
|
// to accomplish the same end.
|
|
//
|
|
//*****************************************************************************
|
|
#ifndef DEPRECATED
|
|
//*****************************************************************************
|
|
//
|
|
//! Selects the secondary peripheral for a set of uDMA channels.
|
|
//!
|
|
//! \param ui32SecPeriphs is the logical OR of the uDMA channels for which to
|
|
//! use the secondary peripheral, instead of the default peripheral.
|
|
//!
|
|
//! This function is used to select the secondary peripheral assignment for a
|
|
//! set of uDMA channels. By selecting the secondary peripheral assignment for
|
|
//! a channel, the default peripheral assignment is no longer available for
|
|
//! that channel.
|
|
//!
|
|
//! The parameter \e ui32SecPeriphs can be the logical OR of any of the
|
|
//! following macros. If one of the macros below is in the list passed to this
|
|
//! function, then the secondary peripheral (marked as \b _SEC_) is selected.
|
|
//!
|
|
//! - \b UDMA_DEF_USBEP1RX_SEC_UART2RX
|
|
//! - \b UDMA_DEF_USBEP1TX_SEC_UART2TX
|
|
//! - \b UDMA_DEF_USBEP2RX_SEC_TMR3A
|
|
//! - \b UDMA_DEF_USBEP2TX_SEC_TMR3B
|
|
//! - \b UDMA_DEF_USBEP3RX_SEC_TMR2A
|
|
//! - \b UDMA_DEF_USBEP3TX_SEC_TMR2B
|
|
//! - \b UDMA_DEF_ETH0RX_SEC_TMR2A
|
|
//! - \b UDMA_DEF_ETH0TX_SEC_TMR2B
|
|
//! - \b UDMA_DEF_UART0RX_SEC_UART1RX
|
|
//! - \b UDMA_DEF_UART0TX_SEC_UART1TX
|
|
//! - \b UDMA_DEF_SSI0RX_SEC_SSI1RX
|
|
//! - \b UDMA_DEF_SSI0TX_SEC_SSI1TX
|
|
//! - \b UDMA_DEF_RESERVED_SEC_UART2RX
|
|
//! - \b UDMA_DEF_RESERVED_SEC_UART2TX
|
|
//! - \b UDMA_DEF_ADC00_SEC_TMR2A
|
|
//! - \b UDMA_DEF_ADC01_SEC_TMR2B
|
|
//! - \b UDMA_DEF_ADC02_SEC_RESERVED
|
|
//! - \b UDMA_DEF_ADC03_SEC_RESERVED
|
|
//! - \b UDMA_DEF_TMR0A_SEC_TMR1A
|
|
//! - \b UDMA_DEF_TMR0B_SEC_TMR1B
|
|
//! - \b UDMA_DEF_TMR1A_SEC_EPI0RX
|
|
//! - \b UDMA_DEF_TMR1B_SEC_EPI0TX
|
|
//! - \b UDMA_DEF_UART1RX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_UART1TX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_SSI1RX_SEC_ADC10
|
|
//! - \b UDMA_DEF_SSI1TX_SEC_ADC11
|
|
//! - \b UDMA_DEF_RESERVED_SEC_ADC12
|
|
//! - \b UDMA_DEF_RESERVED_SEC_ADC13
|
|
//! - \b UDMA_DEF_I2S0RX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_I2S0TX_SEC_RESERVED
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelSelectSecondary(uint32_t ui32SecPeriphs)
|
|
{
|
|
//
|
|
// Select the secondary peripheral for the specified channels.
|
|
//
|
|
HWREG(UDMA_CHASGN) |= ui32SecPeriphs;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Selects the default peripheral for a set of uDMA channels.
|
|
//!
|
|
//! \param ui32DefPeriphs is the logical OR of the uDMA channels for which to
|
|
//! use the default peripheral, instead of the secondary peripheral.
|
|
//!
|
|
//! This function is used to select the default peripheral assignment for a set
|
|
//! of uDMA channels.
|
|
//!
|
|
//! The parameter \e ui32DefPeriphs can be the logical OR of any of the
|
|
//! following macros. If one of the macros below is in the list passed to this
|
|
//! function, then the default peripheral (marked as \b _DEF_) is selected.
|
|
//!
|
|
//! - \b UDMA_DEF_USBEP1RX_SEC_UART2RX
|
|
//! - \b UDMA_DEF_USBEP1TX_SEC_UART2TX
|
|
//! - \b UDMA_DEF_USBEP2RX_SEC_TMR3A
|
|
//! - \b UDMA_DEF_USBEP2TX_SEC_TMR3B
|
|
//! - \b UDMA_DEF_USBEP3RX_SEC_TMR2A
|
|
//! - \b UDMA_DEF_USBEP3TX_SEC_TMR2B
|
|
//! - \b UDMA_DEF_ETH0RX_SEC_TMR2A
|
|
//! - \b UDMA_DEF_ETH0TX_SEC_TMR2B
|
|
//! - \b UDMA_DEF_UART0RX_SEC_UART1RX
|
|
//! - \b UDMA_DEF_UART0TX_SEC_UART1TX
|
|
//! - \b UDMA_DEF_SSI0RX_SEC_SSI1RX
|
|
//! - \b UDMA_DEF_SSI0TX_SEC_SSI1TX
|
|
//! - \b UDMA_DEF_RESERVED_SEC_UART2RX
|
|
//! - \b UDMA_DEF_RESERVED_SEC_UART2TX
|
|
//! - \b UDMA_DEF_ADC00_SEC_TMR2A
|
|
//! - \b UDMA_DEF_ADC01_SEC_TMR2B
|
|
//! - \b UDMA_DEF_ADC02_SEC_RESERVED
|
|
//! - \b UDMA_DEF_ADC03_SEC_RESERVED
|
|
//! - \b UDMA_DEF_TMR0A_SEC_TMR1A
|
|
//! - \b UDMA_DEF_TMR0B_SEC_TMR1B
|
|
//! - \b UDMA_DEF_TMR1A_SEC_EPI0RX
|
|
//! - \b UDMA_DEF_TMR1B_SEC_EPI0TX
|
|
//! - \b UDMA_DEF_UART1RX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_UART1TX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_SSI1RX_SEC_ADC10
|
|
//! - \b UDMA_DEF_SSI1TX_SEC_ADC11
|
|
//! - \b UDMA_DEF_RESERVED_SEC_ADC12
|
|
//! - \b UDMA_DEF_RESERVED_SEC_ADC13
|
|
//! - \b UDMA_DEF_I2S0RX_SEC_RESERVED
|
|
//! - \b UDMA_DEF_I2S0TX_SEC_RESERVED
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
uDMAChannelSelectDefault(uint32_t ui32DefPeriphs)
|
|
{
|
|
//
|
|
// Select the default peripheral for the specified channels.
|
|
//
|
|
HWREG(UDMA_CHASGN) &= ~ui32DefPeriphs;
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|