1061 lines
32 KiB
C
1061 lines
32 KiB
C
//*****************************************************************************
|
|
//
|
|
// interrupt.c - Driver for the NVIC Interrupt Controller.
|
|
//
|
|
// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.1.4.178 of the Tiva Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup interrupt_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_nvic.h"
|
|
#include "inc/hw_types.h"
|
|
#include "driverlib/cpu.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/interrupt.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between priority grouping encodings and the number of
|
|
// preemption priority bits.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32Priority[] =
|
|
{
|
|
NVIC_APINT_PRIGROUP_0_8, NVIC_APINT_PRIGROUP_1_7, NVIC_APINT_PRIGROUP_2_6,
|
|
NVIC_APINT_PRIGROUP_3_5, NVIC_APINT_PRIGROUP_4_4, NVIC_APINT_PRIGROUP_5_3,
|
|
NVIC_APINT_PRIGROUP_6_2, NVIC_APINT_PRIGROUP_7_1
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number and the register that contains
|
|
// the priority encoding for that interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32Regs[] =
|
|
{
|
|
0, NVIC_SYS_PRI1, NVIC_SYS_PRI2, NVIC_SYS_PRI3, NVIC_PRI0, NVIC_PRI1,
|
|
NVIC_PRI2, NVIC_PRI3, NVIC_PRI4, NVIC_PRI5, NVIC_PRI6, NVIC_PRI7,
|
|
NVIC_PRI8, NVIC_PRI9, NVIC_PRI10, NVIC_PRI11, NVIC_PRI12, NVIC_PRI13,
|
|
NVIC_PRI14, NVIC_PRI15, NVIC_PRI16, NVIC_PRI17, NVIC_PRI18, NVIC_PRI19,
|
|
NVIC_PRI20, NVIC_PRI21, NVIC_PRI22, NVIC_PRI23, NVIC_PRI24, NVIC_PRI25,
|
|
NVIC_PRI26, NVIC_PRI27, NVIC_PRI28, NVIC_PRI29, NVIC_PRI30, NVIC_PRI31,
|
|
NVIC_PRI32, NVIC_PRI33, NVIC_PRI34
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt enable for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32EnRegs[] =
|
|
{
|
|
NVIC_EN0, NVIC_EN1, NVIC_EN2, NVIC_EN3, NVIC_EN4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt disable for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32Dii16Regs[] =
|
|
{
|
|
NVIC_DIS0, NVIC_DIS1, NVIC_DIS2, NVIC_DIS3, NVIC_DIS4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt pend for that interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32PendRegs[] =
|
|
{
|
|
NVIC_PEND0, NVIC_PEND1, NVIC_PEND2, NVIC_PEND3, NVIC_PEND4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// This is a mapping between interrupt number (for the peripheral interrupts
|
|
// only) and the register that contains the interrupt unpend for that
|
|
// interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_pui32UnpendRegs[] =
|
|
{
|
|
NVIC_UNPEND0, NVIC_UNPEND1, NVIC_UNPEND2, NVIC_UNPEND3, NVIC_UNPEND4
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \internal
|
|
//! The default interrupt handler.
|
|
//!
|
|
//! This is the default interrupt handler for all interrupts. It simply loops
|
|
//! forever so that the system state is preserved for observation by a
|
|
//! debugger. Since interrupts must be disabled before unregistering the
|
|
//! corresponding handler, this should never be called during normal operation.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
static void
|
|
_IntDefaultHandler(void)
|
|
{
|
|
//
|
|
// Go into an infinite loop.
|
|
//
|
|
while(1)
|
|
{
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// The processor vector table.
|
|
//
|
|
// This contains a list of the handlers for the various interrupt sources in
|
|
// the system. The layout of this list is defined by the hardware; assertion
|
|
// of an interrupt causes the processor to start executing directly at the
|
|
// address given in the corresponding location in this list.
|
|
//
|
|
//*****************************************************************************
|
|
//
|
|
// Set the size of the vector table to the largest number of interrupts of
|
|
// any device
|
|
//
|
|
#undef NUM_INTERRUPTS
|
|
#define NUM_INTERRUPTS 155
|
|
#if defined(ewarm)
|
|
#pragma data_alignment=1024
|
|
static __no_init void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) @ "VTABLE";
|
|
#elif defined(sourcerygxx)
|
|
static __attribute__((section(".cs3.region-head.ram")))
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) __attribute__ ((aligned(1024)));
|
|
#elif defined(ccs) || defined(DOXYGEN)
|
|
#pragma DATA_ALIGN(g_pfnRAMVectors, 1024)
|
|
#pragma DATA_SECTION(g_pfnRAMVectors, ".vtable")
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void);
|
|
#else
|
|
static __attribute__((section("vtable")))
|
|
void (*g_pfnRAMVectors[NUM_INTERRUPTS])(void) __attribute__((aligned(1024)));
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the processor interrupt.
|
|
//!
|
|
//! This function allows the processor to respond to interrupts. This function
|
|
//! does not affect the set of interrupts enabled in the interrupt controller;
|
|
//! it just gates the single interrupt from the controller to the processor.
|
|
//!
|
|
//! \b Example: Enable interrupts to the processor.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Enable interrupts to the processor.
|
|
//! //
|
|
//! IntMasterEnable();
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return Returns \b true if interrupts were disabled when the function was
|
|
//! called or \b false if they were initially enabled.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
IntMasterEnable(void)
|
|
{
|
|
//
|
|
// Enable processor interrupts.
|
|
//
|
|
return(CPUcpsie());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the processor interrupt.
|
|
//!
|
|
//! This function prevents the processor from receiving interrupts. This
|
|
//! function does not affect the set of interrupts enabled in the interrupt
|
|
//! controller; it just gates the single interrupt from the controller to the
|
|
//! processor.
|
|
//!
|
|
//! \note Previously, this function had no return value. As such, it was
|
|
//! possible to include <tt>interrupt.h</tt> and call this function without
|
|
//! having included <tt>hw_types.h</tt>. Now that the return is a
|
|
//! <tt>bool</tt>, a compiler error occurs in this case. The solution
|
|
//! is to include <tt>hw_types.h</tt> before including <tt>interrupt.h</tt>.
|
|
//!
|
|
//! \b Example: Disable interrupts to the processor.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Disable interrupts to the processor.
|
|
//! //
|
|
//! IntMasterDisable();
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return Returns \b true if interrupts were already disabled when the
|
|
//! function was called or \b false if they were initially enabled.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
IntMasterDisable(void)
|
|
{
|
|
//
|
|
// Disable processor interrupts.
|
|
//
|
|
return(CPUcpsid());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers a function to be called when an interrupt occurs.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt in question.
|
|
//! \param pfnHandler is a pointer to the function to be called.
|
|
//!
|
|
//! This function is used to specify the handler function to be called when the
|
|
//! given interrupt is asserted to the processor. The \e ui32Interrupt
|
|
//! parameter must be one of the valid \b INT_* values listed in Peripheral
|
|
//! Driver Library User's Guide and defined in the inc/hw_ints.h header file.
|
|
//! When the interrupt occurs, if it is enabled (via IntEnable()), the handler
|
|
//! function is called in interrupt context. Because the handler function can
|
|
//! preempt other code, care must be taken to protect memory or peripherals
|
|
//! that are accessed by the handler and other non-handler code.
|
|
//!
|
|
//! \note The use of this function (directly or indirectly via a peripheral
|
|
//! driver interrupt register function) moves the interrupt vector table from
|
|
//! flash to SRAM. Therefore, care must be taken when linking the application
|
|
//! to ensure that the SRAM vector table is located at the beginning of SRAM;
|
|
//! otherwise the NVIC does not look in the correct portion of memory for the
|
|
//! vector table (it requires the vector table be on a 1 kB memory alignment).
|
|
//! Normally, the SRAM vector table is so placed via the use of linker scripts.
|
|
//! See the discussion of compile-time versus run-time interrupt handler
|
|
//! registration in the introduction to this chapter.
|
|
//!
|
|
//! \b Example: Set the UART 0 interrupt handler.
|
|
//!
|
|
//! \verbatim
|
|
//!
|
|
//! //
|
|
//! // UART 0 interrupt handler.
|
|
//! //
|
|
//! void
|
|
//! UART0Handler(void)
|
|
//! {
|
|
//! //
|
|
//! // Handle interrupt.
|
|
//! //
|
|
//! }
|
|
//!
|
|
//! //
|
|
//! // Set the UART 0 interrupt handler.
|
|
//! //
|
|
//! IntRegister(INT_UART0, UART0Handler);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntRegister(uint32_t ui32Interrupt, void (*pfnHandler)(void))
|
|
{
|
|
uint32_t ui32Idx, ui32Value;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Make sure that the RAM vector table is correctly aligned.
|
|
//
|
|
ASSERT(((uint32_t)g_pfnRAMVectors & 0x000003ff) == 0);
|
|
|
|
//
|
|
// See if the RAM vector table has been initialized.
|
|
//
|
|
if(HWREG(NVIC_VTABLE) != (uint32_t)g_pfnRAMVectors)
|
|
{
|
|
//
|
|
// Copy the vector table from the beginning of FLASH to the RAM vector
|
|
// table.
|
|
//
|
|
ui32Value = HWREG(NVIC_VTABLE);
|
|
for(ui32Idx = 0; ui32Idx < NUM_INTERRUPTS; ui32Idx++)
|
|
{
|
|
g_pfnRAMVectors[ui32Idx] = (void (*)(void))HWREG((ui32Idx * 4) +
|
|
ui32Value);
|
|
}
|
|
|
|
//
|
|
// Point the NVIC at the RAM vector table.
|
|
//
|
|
HWREG(NVIC_VTABLE) = (uint32_t)g_pfnRAMVectors;
|
|
}
|
|
|
|
//
|
|
// Save the interrupt handler.
|
|
//
|
|
g_pfnRAMVectors[ui32Interrupt] = pfnHandler;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters the function to be called when an interrupt occurs.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt in question.
|
|
//!
|
|
//! This function is used to indicate that no handler is called when the
|
|
//! given interrupt is asserted to the processor. The \e ui32Interrupt
|
|
//! parameter must be one of the valid \b INT_* values listed in Peripheral
|
|
//! Driver Library User's Guide and defined in the inc/hw_ints.h header file.
|
|
//! The interrupt source is automatically disabled (via IntDisable()) if
|
|
//! necessary.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \b Example: Reset the UART 0 interrupt handler to the default handler.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Reset the UART 0 interrupt handler to the default handler.
|
|
//! //
|
|
//! IntUnregister(INT_UART0);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntUnregister(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Reset the interrupt handler.
|
|
//
|
|
g_pfnRAMVectors[ui32Interrupt] = _IntDefaultHandler;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority grouping of the interrupt controller.
|
|
//!
|
|
//! \param ui32Bits specifies the number of bits of preemptable priority.
|
|
//!
|
|
//! This function specifies the split between preemptable priority levels and
|
|
//! sub-priority levels in the interrupt priority specification. The range of
|
|
//! the grouping values are dependent upon the hardware implementation; on
|
|
//! the Tiva C and E Series family, three bits are available for hardware
|
|
//! interrupt prioritization and therefore priority grouping values of three
|
|
//! through seven have the same effect.
|
|
//!
|
|
//! \b Example: Set the priority grouping for the interrupt controller.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Set the priority grouping for the interrupt controller to 2 bits.
|
|
//! //
|
|
//! IntPriorityGroupingSet(2);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPriorityGroupingSet(uint32_t ui32Bits)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Bits < NUM_PRIORITY);
|
|
|
|
//
|
|
// Set the priority grouping.
|
|
//
|
|
HWREG(NVIC_APINT) = NVIC_APINT_VECTKEY | g_pui32Priority[ui32Bits];
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority grouping of the interrupt controller.
|
|
//!
|
|
//! This function returns the split between preemptable priority levels and
|
|
//! sub-priority levels in the interrupt priority specification.
|
|
//!
|
|
//! \b Example: Get the priority grouping for the interrupt controller.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Get the priority grouping for the interrupt controller.
|
|
//! //
|
|
//! IntPriorityGroupingGet();
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return The number of bits of preemptable priority.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
IntPriorityGroupingGet(void)
|
|
{
|
|
uint32_t ui32Loop, ui32Value;
|
|
|
|
//
|
|
// Read the priority grouping.
|
|
//
|
|
ui32Value = HWREG(NVIC_APINT) & NVIC_APINT_PRIGROUP_M;
|
|
|
|
//
|
|
// Loop through the priority grouping values.
|
|
//
|
|
for(ui32Loop = 0; ui32Loop < NUM_PRIORITY; ui32Loop++)
|
|
{
|
|
//
|
|
// Stop looping if this value matches.
|
|
//
|
|
if(ui32Value == g_pui32Priority[ui32Loop])
|
|
{
|
|
break;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Return the number of priority bits.
|
|
//
|
|
return(ui32Loop);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority of an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt in question.
|
|
//! \param ui8Priority specifies the priority of the interrupt.
|
|
//!
|
|
//! This function is used to set the priority of an interrupt. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file. The \e ui8Priority parameter specifies the interrupts
|
|
//! hardware priority level of the interrupt in the interrupt controller.
|
|
//! When multiple interrupts are asserted simultaneously, the ones with the
|
|
//! highest priority are processed before the lower priority interrupts.
|
|
//! Smaller numbers correspond to higher interrupt priorities; priority 0 is
|
|
//! the highest interrupt priority.
|
|
//!
|
|
//! \note The hardware priority mechanism only looks at the upper 3 bits of the
|
|
//! priority level, so any prioritization must be performed in those bits. The
|
|
//! remaining bits can be used to sub-prioritize the interrupt sources, and may
|
|
//! be used by the hardware priority mechanism on a future part. This
|
|
//! arrangement allows priorities to migrate to different NVIC implementations
|
|
//! without changing the gross prioritization of the interrupts.
|
|
//!
|
|
//! \b Example: Set priorities for UART 0 and USB interrupts.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Set the UART 0 interrupt priority to the lowest priority.
|
|
//! //
|
|
//! IntPrioritySet(INT_UART0, 0xE0);
|
|
//!
|
|
//! //
|
|
//! // Set the USB 0 interrupt priority to the highest priority.
|
|
//! //
|
|
//! IntPrioritySet(INT_USB0, 0);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPrioritySet(uint32_t ui32Interrupt, uint8_t ui8Priority)
|
|
{
|
|
uint32_t ui32Temp;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32Interrupt >= 4) && (ui32Interrupt < NUM_INTERRUPTS));
|
|
|
|
//
|
|
// Set the interrupt priority.
|
|
//
|
|
ui32Temp = HWREG(g_pui32Regs[ui32Interrupt >> 2]);
|
|
ui32Temp &= ~(0xFF << (8 * (ui32Interrupt & 3)));
|
|
ui32Temp |= ui8Priority << (8 * (ui32Interrupt & 3));
|
|
HWREG(g_pui32Regs[ui32Interrupt >> 2]) = ui32Temp;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority of an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt in question.
|
|
//!
|
|
//! This function gets the priority of an interrupt. The \e ui32Interrupt
|
|
//! parameter must be one of the valid \b INT_* values listed in Peripheral
|
|
//! Driver Library User's Guide and defined in the inc/hw_ints.h header file.
|
|
//! See IntPrioritySet() for a full definition of the priority value.
|
|
//!
|
|
//! \b Example: Get the current UART 0 interrupt priority.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Get the current UART 0 interrupt priority.
|
|
//! //
|
|
//! IntPriorityGet(INT_UART0);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return Returns the interrupt priority for the given interrupt.
|
|
//
|
|
//*****************************************************************************
|
|
int32_t
|
|
IntPriorityGet(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32Interrupt >= 4) && (ui32Interrupt < NUM_INTERRUPTS));
|
|
|
|
//
|
|
// Return the interrupt priority.
|
|
//
|
|
return((HWREG(g_pui32Regs[ui32Interrupt >> 2]) >>
|
|
(8 * (ui32Interrupt & 3))) & 0xFF);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to be enabled.
|
|
//!
|
|
//! The specified interrupt is enabled in the interrupt controller. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file. Other enables for the interrupt (such as at the peripheral
|
|
//! level) are unaffected by this function.
|
|
//!
|
|
//! \b Example: Enable the UART 0 interrupt.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Enable the UART 0 interrupt in the interrupt controller.
|
|
//! //
|
|
//! IntEnable(INT_UART0);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntEnable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to enable.
|
|
//
|
|
if(ui32Interrupt == FAULT_MPU)
|
|
{
|
|
//
|
|
// Enable the MemManage interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_MEM;
|
|
}
|
|
else if(ui32Interrupt == FAULT_BUS)
|
|
{
|
|
//
|
|
// Enable the bus fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_BUS;
|
|
}
|
|
else if(ui32Interrupt == FAULT_USAGE)
|
|
{
|
|
//
|
|
// Enable the usage fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) |= NVIC_SYS_HND_CTRL_USAGE;
|
|
}
|
|
else if(ui32Interrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Enable the System Tick interrupt.
|
|
//
|
|
HWREG(NVIC_ST_CTRL) |= NVIC_ST_CTRL_INTEN;
|
|
}
|
|
else if(ui32Interrupt >= 16)
|
|
{
|
|
//
|
|
// Enable the general interrupt.
|
|
//
|
|
HWREG(g_pui32EnRegs[(ui32Interrupt - 16) / 32]) =
|
|
1 << ((ui32Interrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to be disabled.
|
|
//!
|
|
//! The specified interrupt is disabled in the interrupt controller. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file. Other enables for the interrupt (such as at the peripheral
|
|
//! level) are unaffected by this function.
|
|
//!
|
|
//! \b Example: Disable the UART 0 interrupt.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Disable the UART 0 interrupt in the interrupt controller.
|
|
//! //
|
|
//! IntDisable(INT_UART0);
|
|
//!
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntDisable(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to disable.
|
|
//
|
|
if(ui32Interrupt == FAULT_MPU)
|
|
{
|
|
//
|
|
// Disable the MemManage interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_MEM);
|
|
}
|
|
else if(ui32Interrupt == FAULT_BUS)
|
|
{
|
|
//
|
|
// Disable the bus fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_BUS);
|
|
}
|
|
else if(ui32Interrupt == FAULT_USAGE)
|
|
{
|
|
//
|
|
// Disable the usage fault interrupt.
|
|
//
|
|
HWREG(NVIC_SYS_HND_CTRL) &= ~(NVIC_SYS_HND_CTRL_USAGE);
|
|
}
|
|
else if(ui32Interrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Disable the System Tick interrupt.
|
|
//
|
|
HWREG(NVIC_ST_CTRL) &= ~(NVIC_ST_CTRL_INTEN);
|
|
}
|
|
else if(ui32Interrupt >= 16)
|
|
{
|
|
//
|
|
// Disable the general interrupt.
|
|
//
|
|
HWREG(g_pui32Dii16Regs[(ui32Interrupt - 16) / 32]) =
|
|
1 << ((ui32Interrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Returns if a peripheral interrupt is enabled.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to check.
|
|
//!
|
|
//! This function checks if the specified interrupt is enabled in the interrupt
|
|
//! controller. The \e ui32Interrupt parameter must be one of the valid
|
|
//! \b INT_* values listed in Peripheral Driver Library User's Guide and
|
|
//! defined in the inc/hw_ints.h header file.
|
|
//!
|
|
//! \b Example: Disable the UART 0 interrupt if it is enabled.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Disable the UART 0 interrupt if it is enabled.
|
|
//! //
|
|
//! if(IntIsEnabled(INT_UART0))
|
|
//! {
|
|
//! IntDisable(INT_UART0);
|
|
//! }
|
|
//! \endverbatim
|
|
//!
|
|
//! \return A non-zero value if the interrupt is enabled.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
IntIsEnabled(uint32_t ui32Interrupt)
|
|
{
|
|
uint32_t ui32Ret;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Initialize the return value.
|
|
//
|
|
ui32Ret = 0;
|
|
|
|
//
|
|
// Determine the interrupt to disable.
|
|
//
|
|
if(ui32Interrupt == FAULT_MPU)
|
|
{
|
|
//
|
|
// Check the MemManage interrupt.
|
|
//
|
|
ui32Ret = HWREG(NVIC_SYS_HND_CTRL) & NVIC_SYS_HND_CTRL_MEM;
|
|
}
|
|
else if(ui32Interrupt == FAULT_BUS)
|
|
{
|
|
//
|
|
// Check the bus fault interrupt.
|
|
//
|
|
ui32Ret = HWREG(NVIC_SYS_HND_CTRL) & NVIC_SYS_HND_CTRL_BUS;
|
|
}
|
|
else if(ui32Interrupt == FAULT_USAGE)
|
|
{
|
|
//
|
|
// Check the usage fault interrupt.
|
|
//
|
|
ui32Ret = HWREG(NVIC_SYS_HND_CTRL) & NVIC_SYS_HND_CTRL_USAGE;
|
|
}
|
|
else if(ui32Interrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Check the System Tick interrupt.
|
|
//
|
|
ui32Ret = HWREG(NVIC_ST_CTRL) & NVIC_ST_CTRL_INTEN;
|
|
}
|
|
else if(ui32Interrupt >= 16)
|
|
{
|
|
//
|
|
// Check the general interrupt.
|
|
//
|
|
ui32Ret = HWREG(g_pui32EnRegs[(ui32Interrupt - 16) / 32]) &
|
|
(1 << ((ui32Interrupt - 16) & 31));
|
|
}
|
|
return(ui32Ret);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Pends an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to be pended.
|
|
//!
|
|
//! The specified interrupt is pended in the interrupt controller. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file. Pending an interrupt causes the interrupt controller to
|
|
//! execute the corresponding interrupt handler at the next available time,
|
|
//! based on the current interrupt state priorities. For example, if called by
|
|
//! a higher priority interrupt handler, the specified interrupt handler is not
|
|
//! called until after the current interrupt handler has completed execution.
|
|
//! The interrupt must have been enabled for it to be called.
|
|
//!
|
|
//! \b Example: Pend a UART 0 interrupt.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Pend a UART 0 interrupt.
|
|
//! //
|
|
//! IntPendSet(INT_UART0);
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPendSet(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to pend.
|
|
//
|
|
if(ui32Interrupt == FAULT_NMI)
|
|
{
|
|
//
|
|
// Pend the NMI interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_NMI_SET;
|
|
}
|
|
else if(ui32Interrupt == FAULT_PENDSV)
|
|
{
|
|
//
|
|
// Pend the PendSV interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PEND_SV;
|
|
}
|
|
else if(ui32Interrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Pend the SysTick interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTSET;
|
|
}
|
|
else if(ui32Interrupt >= 16)
|
|
{
|
|
//
|
|
// Pend the general interrupt.
|
|
//
|
|
HWREG(g_pui32PendRegs[(ui32Interrupt - 16) / 32]) =
|
|
1 << ((ui32Interrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Un-pends an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to be un-pended. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file.
|
|
//!
|
|
//! The specified interrupt is un-pended in the interrupt controller. This
|
|
//! causes any previously generated interrupts that have not been handled
|
|
//! yet (due to higher priority interrupts or the interrupt not having been
|
|
//! enabled yet) to be discarded.
|
|
//!
|
|
//! \b Example: Un-pend a UART 0 interrupt.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Un-pend a UART 0 interrupt.
|
|
//! //
|
|
//! IntPendClear(INT_UART0);
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPendClear(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(ui32Interrupt < NUM_INTERRUPTS);
|
|
|
|
//
|
|
// Determine the interrupt to unpend.
|
|
//
|
|
if(ui32Interrupt == FAULT_PENDSV)
|
|
{
|
|
//
|
|
// Unpend the PendSV interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_UNPEND_SV;
|
|
}
|
|
else if(ui32Interrupt == FAULT_SYSTICK)
|
|
{
|
|
//
|
|
// Unpend the SysTick interrupt.
|
|
//
|
|
HWREG(NVIC_INT_CTRL) |= NVIC_INT_CTRL_PENDSTCLR;
|
|
}
|
|
else if(ui32Interrupt >= 16)
|
|
{
|
|
//
|
|
// Unpend the general interrupt.
|
|
//
|
|
HWREG(g_pui32UnpendRegs[(ui32Interrupt - 16) / 32]) =
|
|
1 << ((ui32Interrupt - 16) & 31);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the priority masking level
|
|
//!
|
|
//! \param ui32PriorityMask is the priority level that is masked.
|
|
//!
|
|
//! This function sets the interrupt priority masking level so that all
|
|
//! interrupts at the specified or lesser priority level are masked. Masking
|
|
//! interrupts can be used to globally disable a set of interrupts with
|
|
//! priority below a predetermined threshold. A value of 0 disables priority
|
|
//! masking.
|
|
//!
|
|
//! Smaller numbers correspond to higher interrupt priorities. So for example
|
|
//! a priority level mask of 4 allows interrupts of priority level 0-3,
|
|
//! and interrupts with a numerical priority of 4 and greater are blocked.
|
|
//!
|
|
//! \note The hardware priority mechanism only looks at the upper 3 bits of the
|
|
//! priority level, so any prioritization must be performed in those bits.
|
|
//!
|
|
//! \b Example: Mask of interrupt priorities greater than or equal to 0x80.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Mask of interrupt priorities greater than or equal to 0x80.
|
|
//! //
|
|
//! IntPriorityMaskSet(0x80);
|
|
//! \endverbatim
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntPriorityMaskSet(uint32_t ui32PriorityMask)
|
|
{
|
|
//
|
|
// Set the priority mask.
|
|
//
|
|
CPUbasepriSet(ui32PriorityMask);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the priority masking level
|
|
//!
|
|
//! This function gets the current setting of the interrupt priority masking
|
|
//! level. The value returned is the priority level such that all interrupts
|
|
//! of that and lesser priority are masked. A value of 0 means that priority
|
|
//! masking is disabled.
|
|
//!
|
|
//! Smaller numbers correspond to higher interrupt priorities. So for example
|
|
//! a priority level mask of 4 allows interrupts of priority level 0-3,
|
|
//! and interrupts with a numerical priority of 4 and greater are blocked.
|
|
//!
|
|
//! The hardware priority mechanism only looks at the upper 3 bits of the
|
|
//! priority level, so any prioritization must be performed in those bits.
|
|
//!
|
|
//! \b Example: Get the current interrupt priority mask.
|
|
//!
|
|
//! \verbatim
|
|
//! //
|
|
//! // Get the current interrupt priority mask.
|
|
//! //
|
|
//! IntPriorityMaskGet();
|
|
//! \endverbatim
|
|
//!
|
|
//! \return Returns the value of the interrupt priority level mask.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
IntPriorityMaskGet(void)
|
|
{
|
|
//
|
|
// Return the current priority mask.
|
|
//
|
|
return(CPUbasepriGet());
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Triggers an interrupt.
|
|
//!
|
|
//! \param ui32Interrupt specifies the interrupt to be triggered.
|
|
//!
|
|
//! This function performs a software trigger of an interrupt. The
|
|
//! \e ui32Interrupt parameter must be one of the valid \b INT_* values listed
|
|
//! in Peripheral Driver Library User's Guide and defined in the inc/hw_ints.h
|
|
//! header file. The interrupt controller behaves as if the corresponding
|
|
//! interrupt line was asserted, and the interrupt is handled in the same
|
|
//! manner (meaning that it must be enabled in order to be processed, and the
|
|
//! processing is based on its priority with respect to other unhandled
|
|
//! interrupts).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IntTrigger(uint32_t ui32Interrupt)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ui32Interrupt >= 16) && (ui32Interrupt < NUM_INTERRUPTS));
|
|
|
|
//
|
|
// Trigger this interrupt.
|
|
//
|
|
HWREG(NVIC_SW_TRIG) = ui32Interrupt - 16;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|