2194 lines
66 KiB
C
2194 lines
66 KiB
C
//*****************************************************************************
|
|
//
|
|
// i2c.c - Driver for Inter-IC (I2C) bus block.
|
|
//
|
|
// Copyright (c) 2005-2017 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
//
|
|
// This is part of revision 2.1.4.178 of the Tiva Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup i2c_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include <stdbool.h>
|
|
#include <stdint.h>
|
|
#include "inc/hw_i2c.h"
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_memmap.h"
|
|
#include "inc/hw_sysctl.h"
|
|
#include "inc/hw_types.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/i2c.h"
|
|
#include "driverlib/interrupt.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// A mapping of I2C base address to interrupt number.
|
|
//
|
|
//*****************************************************************************
|
|
static const uint32_t g_ppui32I2CIntMap[][2] =
|
|
{
|
|
{ I2C0_BASE, INT_I2C0_TM4C123 },
|
|
{ I2C1_BASE, INT_I2C1_TM4C123 },
|
|
{ I2C2_BASE, INT_I2C2_TM4C123 },
|
|
{ I2C3_BASE, INT_I2C3_TM4C123 },
|
|
{ I2C4_BASE, INT_I2C4_TM4C123 },
|
|
{ I2C5_BASE, INT_I2C5_TM4C123 },
|
|
};
|
|
|
|
static const int_fast8_t g_i8I2CIntMapRows =
|
|
sizeof(g_ppui32I2CIntMap) / sizeof(g_ppui32I2CIntMap[0]);
|
|
|
|
static const uint32_t g_ppui32I2CIntMapSnowflake[][2] =
|
|
{
|
|
{ I2C0_BASE, INT_I2C0_TM4C129 },
|
|
{ I2C1_BASE, INT_I2C1_TM4C129 },
|
|
{ I2C2_BASE, INT_I2C2_TM4C129 },
|
|
{ I2C3_BASE, INT_I2C3_TM4C129 },
|
|
{ I2C4_BASE, INT_I2C4_TM4C129 },
|
|
{ I2C5_BASE, INT_I2C5_TM4C129 },
|
|
{ I2C6_BASE, INT_I2C6_TM4C129 },
|
|
{ I2C7_BASE, INT_I2C7_TM4C129 },
|
|
{ I2C8_BASE, INT_I2C8_TM4C129 },
|
|
{ I2C9_BASE, INT_I2C9_TM4C129 },
|
|
};
|
|
static const int_fast8_t g_i8I2CIntMapSnowflakeRows =
|
|
sizeof(g_ppui32I2CIntMapSnowflake) / sizeof(g_ppui32I2CIntMapSnowflake[0]);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \internal
|
|
//! Checks an I2C base address.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function determines if a I2C module base address is valid.
|
|
//!
|
|
//! \return Returns \b true if the base address is valid and \b false
|
|
//! otherwise.
|
|
//
|
|
//*****************************************************************************
|
|
#ifdef DEBUG
|
|
static bool
|
|
_I2CBaseValid(uint32_t ui32Base)
|
|
{
|
|
return((ui32Base == I2C0_BASE) || (ui32Base == I2C1_BASE) ||
|
|
(ui32Base == I2C2_BASE) || (ui32Base == I2C3_BASE) ||
|
|
(ui32Base == I2C4_BASE) || (ui32Base == I2C5_BASE) ||
|
|
(ui32Base == I2C6_BASE) || (ui32Base == I2C7_BASE) ||
|
|
(ui32Base == I2C8_BASE) || (ui32Base == I2C9_BASE));
|
|
}
|
|
#endif
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \internal
|
|
//! Gets the I2C interrupt number.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! Given a I2C base address, this function returns the corresponding
|
|
//! interrupt number.
|
|
//!
|
|
//! \return Returns an I2C interrupt number, or 0 if \e ui32Base is invalid.
|
|
//
|
|
//*****************************************************************************
|
|
static uint32_t
|
|
_I2CIntNumberGet(uint32_t ui32Base)
|
|
{
|
|
int_fast8_t i8Idx, i8Rows;
|
|
const uint32_t (*ppui32I2CIntMap)[2];
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
ppui32I2CIntMap = g_ppui32I2CIntMap;
|
|
i8Rows = g_i8I2CIntMapRows;
|
|
|
|
if(CLASS_IS_TM4C129)
|
|
{
|
|
ppui32I2CIntMap = g_ppui32I2CIntMapSnowflake;
|
|
i8Rows = g_i8I2CIntMapSnowflakeRows;
|
|
}
|
|
|
|
//
|
|
// Loop through the table that maps I2C base addresses to interrupt
|
|
// numbers.
|
|
//
|
|
for(i8Idx = 0; i8Idx < i8Rows; i8Idx++)
|
|
{
|
|
//
|
|
// See if this base address matches.
|
|
//
|
|
if(ppui32I2CIntMap[i8Idx][0] == ui32Base)
|
|
{
|
|
//
|
|
// Return the corresponding interrupt number.
|
|
//
|
|
return(ppui32I2CIntMap[i8Idx][1]);
|
|
}
|
|
}
|
|
|
|
//
|
|
// The base address could not be found, so return an error.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Initializes the I2C Master block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32I2CClk is the rate of the clock supplied to the I2C module.
|
|
//! \param bFast set up for fast data transfers.
|
|
//!
|
|
//! This function initializes operation of the I2C Master block by configuring
|
|
//! the bus speed for the master and enabling the I2C Master block.
|
|
//!
|
|
//! If the parameter \e bFast is \b true, then the master block is set up to
|
|
//! transfer data at 400 Kbps; otherwise, it is set up to transfer data at
|
|
//! 100 Kbps. If Fast Mode Plus (1 Mbps) is desired, software should manually
|
|
//! write the I2CMTPR after calling this function. For High Speed (3.4 Mbps)
|
|
//! mode, a specific command is used to switch to the faster clocks after the
|
|
//! initial communication with the slave is done at either 100 Kbps or
|
|
//! 400 Kbps.
|
|
//!
|
|
//! The peripheral clock is the same as the processor clock. The frequency of
|
|
//! the system clock is the value returned by SysCtlClockGet() for TM4C123x
|
|
//! devices or the value returned by SysCtlClockFreqSet() for TM4C129x devices,
|
|
//! or it can be explicitly hard coded if it is constant and known (to save the
|
|
//! code/execution overhead of a call to SysCtlClockGet() or fetch of the
|
|
//! variable call holding the return value of SysCtlClockFreqSet()).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterInitExpClk(uint32_t ui32Base, uint32_t ui32I2CClk,
|
|
bool bFast)
|
|
{
|
|
uint32_t ui32SCLFreq;
|
|
uint32_t ui32TPR;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Must enable the device before doing anything else.
|
|
//
|
|
I2CMasterEnable(ui32Base);
|
|
|
|
//
|
|
// Get the desired SCL speed.
|
|
//
|
|
if(bFast == true)
|
|
{
|
|
ui32SCLFreq = 400000;
|
|
}
|
|
else
|
|
{
|
|
ui32SCLFreq = 100000;
|
|
}
|
|
|
|
//
|
|
// Compute the clock divider that achieves the fastest speed less than or
|
|
// equal to the desired speed. The numerator is biased to favor a larger
|
|
// clock divider so that the resulting clock is always less than or equal
|
|
// to the desired clock, never greater.
|
|
//
|
|
ui32TPR = ((ui32I2CClk + (2 * 10 * ui32SCLFreq) - 1) /
|
|
(2 * 10 * ui32SCLFreq)) - 1;
|
|
HWREG(ui32Base + I2C_O_MTPR) = ui32TPR;
|
|
|
|
//
|
|
// Check to see if this I2C peripheral is High-Speed enabled. If yes, also
|
|
// choose the fastest speed that is less than or equal to 3.4 Mbps.
|
|
//
|
|
if(HWREG(ui32Base + I2C_O_PP) & I2C_PP_HS)
|
|
{
|
|
ui32TPR = ((ui32I2CClk + (2 * 3 * 3400000) - 1) /
|
|
(2 * 3 * 3400000)) - 1;
|
|
HWREG(ui32Base + I2C_O_MTPR) = I2C_MTPR_HS | ui32TPR;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Initializes the I2C Slave block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8SlaveAddr 7-bit slave address
|
|
//!
|
|
//! This function initializes operation of the I2C Slave block by configuring
|
|
//! the slave address and enabling the I2C Slave block.
|
|
//!
|
|
//! The parameter \e ui8SlaveAddr is the value that is compared against the
|
|
//! slave address sent by an I2C master.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveInit(uint32_t ui32Base, uint8_t ui8SlaveAddr)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
ASSERT(!(ui8SlaveAddr & 0x80));
|
|
|
|
//
|
|
// Must enable the device before doing anything else.
|
|
//
|
|
I2CSlaveEnable(ui32Base);
|
|
|
|
//
|
|
// Set up the slave address.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SOAR) = ui8SlaveAddr;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the I2C slave address.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8AddrNum determines which slave address is set.
|
|
//! \param ui8SlaveAddr is the 7-bit slave address
|
|
//!
|
|
//! This function writes the specified slave address. The \e ui32AddrNum field
|
|
//! dictates which slave address is configured. For example, a value of 0
|
|
//! configures the primary address and a value of 1 configures the secondary.
|
|
//!
|
|
//! \note Not all Tiva devices support a secondary address. Please
|
|
//! consult the device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveAddressSet(uint32_t ui32Base, uint8_t ui8AddrNum, uint8_t ui8SlaveAddr)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
ASSERT(!(ui8AddrNum > 1));
|
|
ASSERT(!(ui8SlaveAddr & 0x80));
|
|
|
|
//
|
|
// Determine which slave address is being set.
|
|
//
|
|
switch(ui8AddrNum)
|
|
{
|
|
//
|
|
// Set up the primary slave address.
|
|
//
|
|
case 0:
|
|
{
|
|
HWREG(ui32Base + I2C_O_SOAR) = ui8SlaveAddr;
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Set up and enable the secondary slave address.
|
|
//
|
|
case 1:
|
|
{
|
|
HWREG(ui32Base + I2C_O_SOAR2) = I2C_SOAR2_OAR2EN | ui8SlaveAddr;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the I2C Master block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function enables operation of the I2C Master block.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterEnable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the master block.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) |= I2C_MCR_MFE;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the I2C Slave block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This fucntion enables operation of the I2C Slave block.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveEnable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the clock to the slave block.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) |= I2C_MCR_SFE;
|
|
|
|
//
|
|
// Enable the slave.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SCSR) = I2C_SCSR_DA;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the I2C master block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function disables operation of the I2C master block.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterDisable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the master block.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) &= ~(I2C_MCR_MFE);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the I2C slave block.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function disables operation of the I2C slave block.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveDisable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the slave.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SCSR) = 0;
|
|
|
|
//
|
|
// Disable the clock to the slave block.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) &= ~(I2C_MCR_SFE);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for the I2C module.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! I2C interrupt occurs.
|
|
//!
|
|
//! This function sets the handler to be called when an I2C interrupt occurs.
|
|
//! This function enables the global interrupt in the interrupt controller;
|
|
//! specific I2C interrupts must be enabled via I2CMasterIntEnable() and
|
|
//! I2CSlaveIntEnable(). If necessary, it is the interrupt handler's
|
|
//! responsibility to clear the interrupt source via I2CMasterIntClear() and
|
|
//! I2CSlaveIntClear().
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CIntRegister(uint32_t ui32Base, void (*pfnHandler)(void))
|
|
{
|
|
uint32_t ui32Int;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Determine the interrupt number based on the I2C port.
|
|
//
|
|
ui32Int = _I2CIntNumberGet(ui32Base);
|
|
|
|
ASSERT(ui32Int != 0);
|
|
|
|
//
|
|
// Register the interrupt handler, returning an error if an error occurs.
|
|
//
|
|
IntRegister(ui32Int, pfnHandler);
|
|
|
|
//
|
|
// Enable the I2C interrupt.
|
|
//
|
|
IntEnable(ui32Int);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters an interrupt handler for the I2C module.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function clears the handler to be called when an I2C interrupt
|
|
//! occurs. This function also masks off the interrupt in the interrupt r
|
|
//! controller so that the interrupt handler no longer is called.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CIntUnregister(uint32_t ui32Base)
|
|
{
|
|
uint32_t ui32Int;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Determine the interrupt number based on the I2C port.
|
|
//
|
|
ui32Int = _I2CIntNumberGet(ui32Base);
|
|
|
|
ASSERT(ui32Int != 0);
|
|
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(ui32Int);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(ui32Int);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the I2C Master interrupt.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function enables the I2C Master interrupt source.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntEnable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the master interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MIMR) = 1;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables individual I2C Master interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to be enabled.
|
|
//!
|
|
//! This function enables the indicated I2C Master interrupt sources. Only the
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ui32IntFlags parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b I2C_MASTER_INT_RX_FIFO_FULL - RX FIFO Full interrupt
|
|
//! - \b I2C_MASTER_INT_TX_FIFO_EMPTY - TX FIFO Empty interrupt
|
|
//! - \b I2C_MASTER_INT_RX_FIFO_REQ - RX FIFO Request interrupt
|
|
//! - \b I2C_MASTER_INT_TX_FIFO_REQ - TX FIFO Request interrupt
|
|
//! - \b I2C_MASTER_INT_ARB_LOST - Arbitration Lost interrupt
|
|
//! - \b I2C_MASTER_INT_STOP - Stop Condition interrupt
|
|
//! - \b I2C_MASTER_INT_START - Start Condition interrupt
|
|
//! - \b I2C_MASTER_INT_NACK - Address/Data NACK interrupt
|
|
//! - \b I2C_MASTER_INT_TX_DMA_DONE - TX DMA Complete interrupt
|
|
//! - \b I2C_MASTER_INT_RX_DMA_DONE - RX DMA Complete interrupt
|
|
//! - \b I2C_MASTER_INT_TIMEOUT - Clock Timeout interrupt
|
|
//! - \b I2C_MASTER_INT_DATA - Data interrupt
|
|
//!
|
|
//! \note Not all Tiva devices support all of the listed interrupt
|
|
//! sources. Please consult the device data sheet to determine if these
|
|
//! features are supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntEnableEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the master interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MIMR) |= ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the I2C Slave interrupt.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function enables the I2C Slave interrupt source.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntEnable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the slave interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SIMR) |= I2C_SLAVE_INT_DATA;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables individual I2C Slave interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to be enabled.
|
|
//!
|
|
//! This function enables the indicated I2C Slave interrupt sources. Only the
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ui32IntFlags parameter is the logical OR of any of the following:
|
|
//!
|
|
//! - \b I2C_SLAVE_INT_RX_FIFO_FULL - RX FIFO Full interrupt
|
|
//! - \b I2C_SLAVE_INT_TX_FIFO_EMPTY - TX FIFO Empty interrupt
|
|
//! - \b I2C_SLAVE_INT_RX_FIFO_REQ - RX FIFO Request interrupt
|
|
//! - \b I2C_SLAVE_INT_TX_FIFO_REQ - TX FIFO Request interrupt
|
|
//! - \b I2C_SLAVE_INT_TX_DMA_DONE - TX DMA Complete interrupt
|
|
//! - \b I2C_SLAVE_INT_RX_DMA_DONE - RX DMA Complete interrupt
|
|
//! - \b I2C_SLAVE_INT_STOP - Stop condition detected interrupt
|
|
//! - \b I2C_SLAVE_INT_START - Start condition detected interrupt
|
|
//! - \b I2C_SLAVE_INT_DATA - Data interrupt
|
|
//!
|
|
//! \note Not all Tiva devices support the all of the listed interrupts.
|
|
//! Please consult the device data sheet to determine if these features are
|
|
//! supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntEnableEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the slave interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SIMR) |= ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the I2C Master interrupt.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function disables the I2C Master interrupt source.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntDisable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the master interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MIMR) = 0;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables individual I2C Master interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to be
|
|
//! disabled.
|
|
//!
|
|
//! This function disables the indicated I2C Master interrupt sources. Only
|
|
//! the sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ui32IntFlags parameter has the same definition as the
|
|
//! \e ui32IntFlags parameter to I2CMasterIntEnableEx().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntDisableEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the master interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MIMR) &= ~ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the I2C Slave interrupt.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function disables the I2C Slave interrupt source.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntDisable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the slave interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SIMR) &= ~I2C_SLAVE_INT_DATA;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables individual I2C Slave interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is the bit mask of the interrupt sources to be
|
|
//! disabled.
|
|
//!
|
|
//! This function disables the indicated I2C Slave interrupt sources. Only
|
|
//! the sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! The \e ui32IntFlags parameter has the same definition as the
|
|
//! \e ui32IntFlags parameter to I2CSlaveIntEnableEx().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntDisableEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable the slave interrupt.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SIMR) &= ~ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current I2C Master interrupt status.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bMasked is false if the raw interrupt status is requested and
|
|
//! true if the masked interrupt status is requested.
|
|
//!
|
|
//! This function returns the interrupt status for the I2C module.
|
|
//! Either the raw interrupt status or the status of interrupts that are
|
|
//! allowed to reflect to the processor can be returned.
|
|
//!
|
|
//! \return The current interrupt status, returned as \b true if active
|
|
//! or \b false if not active.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
I2CMasterIntStatus(uint32_t ui32Base, bool bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return((HWREG(ui32Base + I2C_O_MMIS)) ? true : false);
|
|
}
|
|
else
|
|
{
|
|
return((HWREG(ui32Base + I2C_O_MRIS)) ? true : false);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current I2C Master interrupt status.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bMasked is false if the raw interrupt status is requested and
|
|
//! true if the masked interrupt status is requested.
|
|
//!
|
|
//! This function returns the interrupt status for the I2C module.
|
|
//! Either the raw interrupt status or the status of interrupts that are
|
|
//! allowed to reflect to the processor can be returned.
|
|
//!
|
|
//! \return Returns the current interrupt status, enumerated as a bit field of
|
|
//! values described in I2CMasterIntEnableEx().
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CMasterIntStatusEx(uint32_t ui32Base, bool bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return(HWREG(ui32Base + I2C_O_MMIS));
|
|
}
|
|
else
|
|
{
|
|
return(HWREG(ui32Base + I2C_O_MRIS));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current I2C Slave interrupt status.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bMasked is false if the raw interrupt status is requested and
|
|
//! true if the masked interrupt status is requested.
|
|
//!
|
|
//! This function returns the interrupt status for the I2C Slave.
|
|
//! Either the raw interrupt status or the status of interrupts that are
|
|
//! allowed to reflect to the processor can be returned.
|
|
//!
|
|
//! \return The current interrupt status, returned as \b true if active
|
|
//! or \b false if not active.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
I2CSlaveIntStatus(uint32_t ui32Base, bool bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return((HWREG(ui32Base + I2C_O_SMIS)) ? true : false);
|
|
}
|
|
else
|
|
{
|
|
return((HWREG(ui32Base + I2C_O_SRIS)) ? true : false);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current I2C Slave interrupt status.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bMasked is false if the raw interrupt status is requested and
|
|
//! true if the masked interrupt status is requested.
|
|
//!
|
|
//! This function returns the interrupt status for the I2C Slave.
|
|
//! Either the raw interrupt status or the status of interrupts that are
|
|
//! allowed to reflect to the processor can be returned.
|
|
//!
|
|
//! \return Returns the current interrupt status, enumerated as a bit field of
|
|
//! values described in I2CSlaveIntEnableEx().
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CSlaveIntStatusEx(uint32_t ui32Base, bool bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return(HWREG(ui32Base + I2C_O_SMIS));
|
|
}
|
|
else
|
|
{
|
|
return(HWREG(ui32Base + I2C_O_SRIS));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears I2C Master interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! The I2C Master interrupt source is cleared, so that it no longer
|
|
//! asserts. This function must be called in the interrupt handler to keep the
|
|
//! interrupt from being triggered again immediately upon exit.
|
|
//!
|
|
//! \note Because there is a write buffer in the Cortex-M processor, it may
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (because the interrupt controller still sees
|
|
//! the interrupt source asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntClear(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear the I2C master interrupt source.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MICR) = I2C_MICR_IC;
|
|
|
|
//
|
|
// Workaround for I2C master interrupt clear errata for rev B Tiva
|
|
// devices. For later devices, this write is ignored and therefore
|
|
// harmless (other than the slight performance hit).
|
|
//
|
|
HWREG(ui32Base + I2C_O_MMIS) = I2C_MICR_IC;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears I2C Master interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is a bit mask of the interrupt sources to be cleared.
|
|
//!
|
|
//! The specified I2C Master interrupt sources are cleared, so that they no
|
|
//! longer assert. This function must be called in the interrupt handler to
|
|
//! keep the interrupt from being triggered again immediately upon exit.
|
|
//!
|
|
//! The \e ui32IntFlags parameter has the same definition as the
|
|
//! \e ui32IntFlags parameter to I2CMasterIntEnableEx().
|
|
//!
|
|
//! \note Because there is a write buffer in the Cortex-M processor, it may
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (because the interrupt controller still sees
|
|
//! the interrupt source asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterIntClearEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear the I2C master interrupt source.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MICR) = ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears I2C Slave interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! The I2C Slave interrupt source is cleared, so that it no longer asserts.
|
|
//! This function must be called in the interrupt handler to keep the interrupt
|
|
//! from being triggered again immediately upon exit.
|
|
//!
|
|
//! \note Because there is a write buffer in the Cortex-M processor, it may
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (because the interrupt controller still sees
|
|
//! the interrupt source asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntClear(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear the I2C slave interrupt source.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SICR) = I2C_SICR_DATAIC;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears I2C Slave interrupt sources.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32IntFlags is a bit mask of the interrupt sources to be cleared.
|
|
//!
|
|
//! The specified I2C Slave interrupt sources are cleared, so that they no
|
|
//! longer assert. This function must be called in the interrupt handler to
|
|
//! keep the interrupt from being triggered again immediately upon exit.
|
|
//!
|
|
//! The \e ui32IntFlags parameter has the same definition as the
|
|
//! \e ui32IntFlags parameter to I2CSlaveIntEnableEx().
|
|
//!
|
|
//! \note Because there is a write buffer in the Cortex-M processor, it may
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (because the interrupt controller still sees
|
|
//! the interrupt source asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveIntClearEx(uint32_t ui32Base, uint32_t ui32IntFlags)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear the I2C slave interrupt source.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SICR) = ui32IntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the address that the I2C Master places on the bus.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8SlaveAddr 7-bit slave address
|
|
//! \param bReceive flag indicating the type of communication with the slave
|
|
//!
|
|
//! This function configures the address that the I2C Master places on the
|
|
//! bus when initiating a transaction. When the \e bReceive parameter is set
|
|
//! to \b true, the address indicates that the I2C Master is initiating a
|
|
//! read from the slave; otherwise the address indicates that the I2C
|
|
//! Master is initiating a write to the slave.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterSlaveAddrSet(uint32_t ui32Base, uint8_t ui8SlaveAddr,
|
|
bool bReceive)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
ASSERT(!(ui8SlaveAddr & 0x80));
|
|
|
|
//
|
|
// Set the address of the slave with which the master will communicate.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MSA) = (ui8SlaveAddr << 1) | bReceive;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads the state of the SDA and SCL pins.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function returns the state of the I2C bus by providing the real time
|
|
//! values of the SDA and SCL pins.
|
|
//!
|
|
//! \note Not all Tiva devices support this function. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return Returns the state of the bus with SDA in bit position 1 and SCL in
|
|
//! bit position 0.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CMasterLineStateGet(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return the line state.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_MBMON));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Indicates whether or not the I2C Master is busy.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function returns an indication of whether or not the I2C Master is
|
|
//! busy transmitting or receiving data.
|
|
//!
|
|
//! \return Returns \b true if the I2C Master is busy; otherwise, returns
|
|
//! \b false.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
I2CMasterBusy(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return the busy status.
|
|
//
|
|
if(HWREG(ui32Base + I2C_O_MCS) & I2C_MCS_BUSY)
|
|
{
|
|
return(true);
|
|
}
|
|
else
|
|
{
|
|
return(false);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Indicates whether or not the I2C bus is busy.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function returns an indication of whether or not the I2C bus is busy.
|
|
//! This function can be used in a multi-master environment to determine if
|
|
//! another master is currently using the bus.
|
|
//!
|
|
//! \return Returns \b true if the I2C bus is busy; otherwise, returns
|
|
//! \b false.
|
|
//
|
|
//*****************************************************************************
|
|
bool
|
|
I2CMasterBusBusy(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return the bus busy status.
|
|
//
|
|
if(HWREG(ui32Base + I2C_O_MCS) & I2C_MCS_BUSBSY)
|
|
{
|
|
return(true);
|
|
}
|
|
else
|
|
{
|
|
return(false);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Controls the state of the I2C Master.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Cmd command to be issued to the I2C Master.
|
|
//!
|
|
//! This function is used to control the state of the Master send and
|
|
//! receive operations. The \e ui8Cmd parameter can be one of the following
|
|
//! values:
|
|
//!
|
|
//! - \b I2C_MASTER_CMD_SINGLE_SEND
|
|
//! - \b I2C_MASTER_CMD_SINGLE_RECEIVE
|
|
//! - \b I2C_MASTER_CMD_BURST_SEND_START
|
|
//! - \b I2C_MASTER_CMD_BURST_SEND_CONT
|
|
//! - \b I2C_MASTER_CMD_BURST_SEND_FINISH
|
|
//! - \b I2C_MASTER_CMD_BURST_SEND_ERROR_STOP
|
|
//! - \b I2C_MASTER_CMD_BURST_RECEIVE_START
|
|
//! - \b I2C_MASTER_CMD_BURST_RECEIVE_CONT
|
|
//! - \b I2C_MASTER_CMD_BURST_RECEIVE_FINISH
|
|
//! - \b I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP
|
|
//! - \b I2C_MASTER_CMD_QUICK_COMMAND
|
|
//! - \b I2C_MASTER_CMD_HS_MASTER_CODE_SEND
|
|
//! - \b I2C_MASTER_CMD_FIFO_SINGLE_SEND
|
|
//! - \b I2C_MASTER_CMD_FIFO_SINGLE_RECEIVE
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_SEND_START
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_SEND_CONT
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_SEND_FINISH
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_SEND_ERROR_STOP
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_RECEIVE_START
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_RECEIVE_CONT
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_RECEIVE_FINISH
|
|
//! - \b I2C_MASTER_CMD_FIFO_BURST_RECEIVE_ERROR_STOP
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO and support the FIFO
|
|
//! commands. Please consult the device data sheet to determine if this
|
|
//! feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterControl(uint32_t ui32Base, uint32_t ui32Cmd)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
ASSERT((ui32Cmd == I2C_MASTER_CMD_SINGLE_SEND) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_SINGLE_RECEIVE) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_SEND_START) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_SEND_CONT) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_SEND_FINISH) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_SEND_ERROR_STOP) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_RECEIVE_START) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_RECEIVE_CONT) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_RECEIVE_FINISH) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_BURST_RECEIVE_ERROR_STOP) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_QUICK_COMMAND) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_SINGLE_SEND) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_SINGLE_RECEIVE) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_SEND_START) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_SEND_CONT) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_SEND_FINISH) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_SEND_ERROR_STOP) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_RECEIVE_START) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_RECEIVE_CONT) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_RECEIVE_FINISH) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_FIFO_BURST_RECEIVE_ERROR_STOP) ||
|
|
(ui32Cmd == I2C_MASTER_CMD_HS_MASTER_CODE_SEND));
|
|
|
|
//
|
|
// Send the command.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCS) = ui32Cmd;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the error status of the I2C Master.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function is used to obtain the error status of the Master send
|
|
//! and receive operations.
|
|
//!
|
|
//! \return Returns the error status, as one of \b I2C_MASTER_ERR_NONE,
|
|
//! \b I2C_MASTER_ERR_ADDR_ACK, \b I2C_MASTER_ERR_DATA_ACK, or
|
|
//! \b I2C_MASTER_ERR_ARB_LOST.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CMasterErr(uint32_t ui32Base)
|
|
{
|
|
uint32_t ui32Err;
|
|
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Get the raw error state
|
|
//
|
|
ui32Err = HWREG(ui32Base + I2C_O_MCS);
|
|
|
|
//
|
|
// If the I2C master is busy, then all the other bit are invalid, and
|
|
// don't have an error to report.
|
|
//
|
|
if(ui32Err & I2C_MCS_BUSY)
|
|
{
|
|
return(I2C_MASTER_ERR_NONE);
|
|
}
|
|
|
|
//
|
|
// Check for errors.
|
|
//
|
|
if(ui32Err & (I2C_MCS_ERROR | I2C_MCS_ARBLST))
|
|
{
|
|
return(ui32Err & (I2C_MCS_ARBLST | I2C_MCS_DATACK | I2C_MCS_ADRACK));
|
|
}
|
|
else
|
|
{
|
|
return(I2C_MASTER_ERR_NONE);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Transmits a byte from the I2C Master.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8Data data to be transmitted from the I2C Master.
|
|
//!
|
|
//! This function places the supplied data into I2C Master Data Register.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterDataPut(uint32_t ui32Base, uint8_t ui8Data)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Write the byte.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MDR) = ui8Data;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Receives a byte that has been sent to the I2C Master.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function reads a byte of data from the I2C Master Data Register.
|
|
//!
|
|
//! \return Returns the byte received from by the I2C Master, cast as an
|
|
//! uint32_t.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CMasterDataGet(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Read a byte.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_MDR));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the Master clock timeout value.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Value is the number of I2C clocks before the timeout is
|
|
//! asserted.
|
|
//!
|
|
//! This function enables and configures the clock low timeout feature in the
|
|
//! I2C peripheral. This feature is implemented as a 12-bit counter, with the
|
|
//! upper 8-bits being programmable. For example, to program a timeout of 20ms
|
|
//! with a 100-kHz SCL frequency, \e ui32Value is 0x7d.
|
|
//!
|
|
//! \note Not all Tiva devices support this function. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterTimeoutSet(uint32_t ui32Base, uint32_t ui32Value)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Write the timeout value.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCLKOCNT) = ui32Value;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures ACK override behavior of the I2C Slave.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bEnable enables or disables ACK override.
|
|
//!
|
|
//! This function enables or disables ACK override, allowing the user
|
|
//! application to drive the value on SDA during the ACK cycle.
|
|
//!
|
|
//! \note Not all Tiva devices support this function. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveACKOverride(uint32_t ui32Base, bool bEnable)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable or disable based on bEnable.
|
|
//
|
|
if(bEnable)
|
|
{
|
|
HWREG(ui32Base + I2C_O_SACKCTL) |= I2C_SACKCTL_ACKOEN;
|
|
}
|
|
else
|
|
{
|
|
HWREG(ui32Base + I2C_O_SACKCTL) &= ~I2C_SACKCTL_ACKOEN;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes the ACK value.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param bACK chooses whether to ACK (true) or NACK (false) the transfer.
|
|
//!
|
|
//! This function puts the desired ACK value on SDA during the ACK cycle. The
|
|
//! value written is only valid when ACK override is enabled using
|
|
//! I2CSlaveACKOverride().
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveACKValueSet(uint32_t ui32Base, bool bACK)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// ACK or NACK based on the value of bACK.
|
|
//
|
|
if(bACK)
|
|
{
|
|
HWREG(ui32Base + I2C_O_SACKCTL) &= ~I2C_SACKCTL_ACKOVAL;
|
|
}
|
|
else
|
|
{
|
|
HWREG(ui32Base + I2C_O_SACKCTL) |= I2C_SACKCTL_ACKOVAL;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the I2C Slave status
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function returns the action requested from a master, if any.
|
|
//! Possible values are:
|
|
//!
|
|
//! - \b I2C_SLAVE_ACT_NONE
|
|
//! - \b I2C_SLAVE_ACT_RREQ
|
|
//! - \b I2C_SLAVE_ACT_TREQ
|
|
//! - \b I2C_SLAVE_ACT_RREQ_FBR
|
|
//! - \b I2C_SLAVE_ACT_OWN2SEL
|
|
//! - \b I2C_SLAVE_ACT_QCMD
|
|
//! - \b I2C_SLAVE_ACT_QCMD_DATA
|
|
//!
|
|
//! \note Not all Tiva devices support the second I2C slave's own address
|
|
//! or the quick command function. Please consult the device data sheet to
|
|
//! determine if these features are supported.
|
|
//!
|
|
//! \return Returns \b I2C_SLAVE_ACT_NONE to indicate that no action has been
|
|
//! requested of the I2C Slave, \b I2C_SLAVE_ACT_RREQ to indicate that
|
|
//! an I2C master has sent data to the I2C Slave, \b I2C_SLAVE_ACT_TREQ
|
|
//! to indicate that an I2C master has requested that the I2C Slave send
|
|
//! data, \b I2C_SLAVE_ACT_RREQ_FBR to indicate that an I2C master has sent
|
|
//! data to the I2C slave and the first byte following the slave's own address
|
|
//! has been received, \b I2C_SLAVE_ACT_OWN2SEL to indicate that the second I2C
|
|
//! slave address was matched, \b I2C_SLAVE_ACT_QCMD to indicate that a quick
|
|
//! command was received, and \b I2C_SLAVE_ACT_QCMD_DATA to indicate that the
|
|
//! data bit was set when the quick command was received.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CSlaveStatus(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return the slave status.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_SCSR));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Transmits a byte from the I2C Slave.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8Data is the data to be transmitted from the I2C Slave
|
|
//!
|
|
//! This function places the supplied data into I2C Slave Data Register.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveDataPut(uint32_t ui32Base, uint8_t ui8Data)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Write the byte.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SDR) = ui8Data;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Receives a byte that has been sent to the I2C Slave.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function reads a byte of data from the I2C Slave Data Register.
|
|
//!
|
|
//! \return Returns the byte received from by the I2C Slave, cast as an
|
|
//! uint32_t.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CSlaveDataGet(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Read a byte.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_SDR));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures the I2C transmit (TX) FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Config is the configuration of the FIFO using specified macros.
|
|
//!
|
|
//! This configures the I2C peripheral's transmit FIFO. The transmit FIFO can
|
|
//! be used by the master or slave, but not both. The following macros are
|
|
//! used to configure the TX FIFO behavior for master or slave, with or without
|
|
//! DMA:
|
|
//!
|
|
//! \b I2C_FIFO_CFG_TX_MASTER, \b I2C_FIFO_CFG_TX_SLAVE,
|
|
//! \b I2C_FIFO_CFG_TX_MASTER_DMA, \b I2C_FIFO_CFG_TX_SLAVE_DMA
|
|
//!
|
|
//! To select the trigger level, one of the following macros should be used:
|
|
//!
|
|
//! \b I2C_FIFO_CFG_TX_TRIG_1, \b I2C_FIFO_CFG_TX_TRIG_2,
|
|
//! \b I2C_FIFO_CFG_TX_TRIG_3, \b I2C_FIFO_CFG_TX_TRIG_4,
|
|
//! \b I2C_FIFO_CFG_TX_TRIG_5, \b I2C_FIFO_CFG_TX_TRIG_6,
|
|
//! \b I2C_FIFO_CFG_TX_TRIG_7, \b I2C_FIFO_CFG_TX_TRIG_8
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CTxFIFOConfigSet(uint32_t ui32Base, uint32_t ui32Config)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear transmit configuration data.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) &= 0xffff0000;
|
|
|
|
//
|
|
// Store new transmit configuration data.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) |= ui32Config;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Flushes the transmit (TX) FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function flushes the I2C transmit FIFO.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CTxFIFOFlush(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Flush the TX FIFO.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) |= I2C_FIFOCTL_TXFLUSH;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures the I2C receive (RX) FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Config is the configuration of the FIFO using specified macros.
|
|
//!
|
|
//! This configures the I2C peripheral's receive FIFO. The receive FIFO can be
|
|
//! used by the master or slave, but not both. The following macros are used
|
|
//! to configure the RX FIFO behavior for master or slave, with or without DMA:
|
|
//!
|
|
//! \b I2C_FIFO_CFG_RX_MASTER, \b I2C_FIFO_CFG_RX_SLAVE,
|
|
//! \b I2C_FIFO_CFG_RX_MASTER_DMA, \b I2C_FIFO_CFG_RX_SLAVE_DMA
|
|
//!
|
|
//! To select the trigger level, one of the following macros should be used:
|
|
//!
|
|
//! \b I2C_FIFO_CFG_RX_TRIG_1, \b I2C_FIFO_CFG_RX_TRIG_2,
|
|
//! \b I2C_FIFO_CFG_RX_TRIG_3, \b I2C_FIFO_CFG_RX_TRIG_4,
|
|
//! \b I2C_FIFO_CFG_RX_TRIG_5, \b I2C_FIFO_CFG_RX_TRIG_6,
|
|
//! \b I2C_FIFO_CFG_RX_TRIG_7, \b I2C_FIFO_CFG_RX_TRIG_8
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CRxFIFOConfigSet(uint32_t ui32Base, uint32_t ui32Config)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Clear receive configuration data.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) &= 0x0000ffff;
|
|
|
|
//
|
|
// Store new receive configuration data.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) |= ui32Config;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Flushes the receive (RX) FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function flushes the I2C receive FIFO.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CRxFIFOFlush(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Flush the TX FIFO.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFOCTL) |= I2C_FIFOCTL_RXFLUSH;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current FIFO status.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function retrieves the status for both the transmit (TX) and receive
|
|
//! (RX) FIFOs. The trigger level for the transmit FIFO is set using
|
|
//! I2CTxFIFOConfigSet() and for the receive FIFO using I2CTxFIFOConfigSet().
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return Returns the FIFO status, enumerated as a bit field containing
|
|
//! \b I2C_FIFO_RX_BELOW_TRIG_LEVEL, \b I2C_FIFO_RX_FULL, \b I2C_FIFO_RX_EMPTY,
|
|
//! \b I2C_FIFO_TX_BELOW_TRIG_LEVEL, \b I2C_FIFO_TX_FULL, and
|
|
//! \b I2C_FIFO_TX_EMPTY.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CFIFOStatus(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Return the contents of the FIFO status register.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_FIFOSTATUS));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a data byte to the I2C transmit FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8Data is the data to be placed into the transmit FIFO.
|
|
//!
|
|
//! This function adds a byte of data to the I2C transmit FIFO. If there is
|
|
//! no space available in the FIFO, this function waits for space to become
|
|
//! available before returning.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CFIFODataPut(uint32_t ui32Base, uint8_t ui8Data)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Wait until there is space.
|
|
//
|
|
while(HWREG(ui32Base + I2C_O_FIFOSTATUS) & I2C_FIFOSTATUS_TXFF)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Place data into the FIFO.
|
|
//
|
|
HWREG(ui32Base + I2C_O_FIFODATA) = ui8Data;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a data byte to the I2C transmit FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8Data is the data to be placed into the transmit FIFO.
|
|
//!
|
|
//! This function adds a byte of data to the I2C transmit FIFO. If there is
|
|
//! no space available in the FIFO, this function returns a zero.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return The number of elements added to the I2C transmit FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CFIFODataPutNonBlocking(uint32_t ui32Base, uint8_t ui8Data)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// If FIFO is full, return zero.
|
|
//
|
|
if(HWREG(ui32Base + I2C_O_FIFOSTATUS) & I2C_FIFOSTATUS_TXFF)
|
|
{
|
|
return(0);
|
|
}
|
|
else
|
|
{
|
|
HWREG(ui32Base + I2C_O_FIFODATA) = ui8Data;
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads a byte from the I2C receive FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function reads a byte of data from I2C receive FIFO and places it in
|
|
//! the location specified by the \e pui8Data parameter. If there is no data
|
|
//! available, this function waits until data is received before returning.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return The data byte.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CFIFODataGet(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Wait until there is data to read.
|
|
//
|
|
while(HWREG(ui32Base + I2C_O_FIFOSTATUS) & I2C_FIFOSTATUS_RXFE)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Read a byte.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_FIFODATA));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads a byte from the I2C receive FIFO.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param pui8Data is a pointer where the read data is stored.
|
|
//!
|
|
//! This function reads a byte of data from I2C receive FIFO and places it in
|
|
//! the location specified by the \e pui8Data parameter. If there is no data
|
|
//! available, this functions returns 0.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return The number of elements read from the I2C receive FIFO.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CFIFODataGetNonBlocking(uint32_t ui32Base, uint8_t *pui8Data)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// If nothing in the FIFO, return zero.
|
|
//
|
|
if(HWREG(ui32Base + I2C_O_FIFOSTATUS) & I2C_FIFOSTATUS_RXFE)
|
|
{
|
|
return(0);
|
|
}
|
|
else
|
|
{
|
|
*pui8Data = HWREG(ui32Base + I2C_O_FIFODATA);
|
|
return(1);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Set the burst length for a I2C master FIFO operation.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui8Length is the length of the burst transfer.
|
|
//!
|
|
//! This function configures the burst length for a I2C Master FIFO operation.
|
|
//! The burst field is limited to 8 bits or 256 bytes. The burst length
|
|
//! applies to a single I2CMCS BURST operation meaning that it specifies the
|
|
//! burst length for only the current operation (can be TX or RX). Each burst
|
|
//! operation must configure the burst length prior to writing the BURST bit
|
|
//! in the I2CMCS using I2CMasterControl().
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterBurstLengthSet(uint32_t ui32Base, uint8_t ui8Length)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base) && (ui8Length < 256));
|
|
|
|
//
|
|
// Set the burst length.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MBLEN) = ui8Length;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Returns the current value of the burst transfer counter.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function returns the current value of the burst transfer counter that
|
|
//! is used by the FIFO mechanism. Software can use this value to determine
|
|
//! how many bytes remain in a transfer, or where in the transfer the burst
|
|
//! operation was if an error has occurred.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
uint32_t
|
|
I2CMasterBurstCountGet(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Get burst count.
|
|
//
|
|
return(HWREG(ui32Base + I2C_O_MBCNT));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Configures the I2C Master glitch filter.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Config is the glitch filter configuration.
|
|
//!
|
|
//! This function configures the I2C Master glitch filter. The value passed in
|
|
//! to \e ui32Config determines the sampling range of the glitch filter, which
|
|
//! is configurable between 1 and 32 system clock cycles. The default
|
|
//! configuration of the glitch filter is 0 system clock cycles, which means
|
|
//! that it's disabled.
|
|
//!
|
|
//! The \e ui32Config field should be any of the following values:
|
|
//!
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_DISABLED
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_1
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_2
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_3
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_4
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_8
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_16
|
|
//! - \b I2C_MASTER_GLITCH_FILTER_32
|
|
//!
|
|
//! \note Not all Tiva devices support this function. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CMasterGlitchFilterConfigSet(uint32_t ui32Base, uint32_t ui32Config)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Configure the glitch filter field of MTPR if it is TM4C129
|
|
//
|
|
if(CLASS_IS_TM4C129)
|
|
{
|
|
HWREG(ui32Base + I2C_O_MTPR) |= ui32Config;
|
|
}
|
|
|
|
//
|
|
// Configure the glitch filter if it is TM4C123
|
|
//
|
|
if(CLASS_IS_TM4C123)
|
|
{
|
|
//
|
|
// Configure the glitch filter pulse width
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR2) |= (ui32Config >> 12);
|
|
|
|
//
|
|
// Enable the glitch filter by setting the GFE bit
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) |= I2C_MCR_GFE;
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables FIFO usage for the I2C Slave.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//! \param ui32Config is the desired FIFO configuration of the I2C Slave.
|
|
//!
|
|
//! This function configures the I2C Slave to use the FIFO(s). This
|
|
//! function should be used in combination with I2CTxFIFOConfigSet() and/or
|
|
//! I2CRxFIFOConfigSet(), which configure the FIFO trigger level and tell
|
|
//! the FIFO hardware whether to interact with the I2C Master or Slave. The
|
|
//! application appropriate combination of \b I2C_SLAVE_TX_FIFO_ENABLE and
|
|
//! \b I2C_SLAVE_RX_FIFO_ENABLE should be passed in to the \e ui32Config
|
|
//! field.
|
|
//!
|
|
//! The Slave I2CSCSR register is write-only, so any call to I2CSlaveEnable(),
|
|
//! I2CSlaveDisable or I2CSlaveFIFOEnable() overwrites the slave configuration.
|
|
//! Therefore, application software should call I2CSlaveEnable() followed by
|
|
//! I2CSlaveFIFOEnable() with the desired FIFO configuration.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveFIFOEnable(uint32_t ui32Base, uint32_t ui32Config)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Enable the FIFOs for the slave.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SCSR) = ui32Config | I2C_SCSR_DA;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disable FIFO usage for the I2C Slave.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function disables the FIFOs for the I2C Slave. After calling this
|
|
//! this function, the FIFOs are disabled, but the Slave remains active.
|
|
//!
|
|
//! \note Not all Tiva devices have an I2C FIFO. Please consult the
|
|
//! device data sheet to determine if this feature is supported.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
I2CSlaveFIFODisable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Disable slave FIFOs.
|
|
//
|
|
HWREG(ui32Base + I2C_O_SCSR) = I2C_SCSR_DA;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables internal loopback mode for an I2C port.
|
|
//!
|
|
//! \param ui32Base is the base address of the I2C module.
|
|
//!
|
|
//! This function configures an I2C port in internal loopback mode to help with
|
|
//! diagnostics and debug. In this mode, the SDA and SCL signals from master
|
|
//! and slave modules are internally connected. This allows data to be
|
|
//! transferred between the master and slave modules of the same I2C port,
|
|
//! without having to go through I/O's. I2CMasterDataPut(), I2CSlaveDataPut(),
|
|
//! I2CMasterDataGet(),I2CSlaveDataGet() can be used along with this function.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void I2CLoopbackEnable(uint32_t ui32Base)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(_I2CBaseValid(ui32Base));
|
|
|
|
//
|
|
// Write the loopback enable bit to the register.
|
|
//
|
|
HWREG(ui32Base + I2C_O_MCR) |= I2C_MCR_LPBK;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|