722 lines
27 KiB
Markdown
722 lines
27 KiB
Markdown
# Update History
|
|
------
|
|
## V3.2.0 Sep 30, 2023
|
|
#### documents
|
|
#### drivers
|
|
- ##### bsp/ev_hc32f460_lqfp100_v2
|
|
- Add API BSP_XTAL32_Init()
|
|
- Optimize function BSP_I2C_Init()
|
|
- Add include file named hc32_ll_fcm.h and add declaration of BSP_XTAL32_Init()
|
|
- Modify for MISRAC2012
|
|
- Modify SPI clock divide factor from DIV4 to DIV64
|
|
- Modify spi timeout value
|
|
- ##### cmsis/Device
|
|
- Modify headfile based on reference manual Rev1.6
|
|
- Optimze for the unused bit definitions
|
|
- ##### hc32_ll_driver
|
|
- **generic**
|
|
- Modify version as 3.2.0
|
|
- Modify typo
|
|
- Add __NO_OPTIMIZE configuration item
|
|
- Add attribute for __RAM_FUNC definition
|
|
- **interrupts_share**
|
|
- IRQxxx_Handler add __DSB for Arm Errata 838869
|
|
- The BCSTR register of TimerA is split into BCSTRH and BCSTRL
|
|
- Modify for head file update: EIRQFR -> EIFR
|
|
- **adc**
|
|
- Modify typo
|
|
- API fixed: ADC_DeInit()
|
|
- **aes**
|
|
- Add API AES_DeInit()
|
|
- **aos**
|
|
- Modify for new head file
|
|
- **can**
|
|
- Added 3 APIs for local-reset
|
|
- Modify typo
|
|
- Added 3 APIs for local-reset.Refine local function CAN_ReadRxBuf(), CAN_WriteTxBuf()
|
|
- **clk**
|
|
- Modify FCG0 default value
|
|
- Modify typo
|
|
- Modify CLK_SetUSBClockSrc(), add delay after configure USB clock
|
|
- Modify API CLK_Xtal32Cmd(), CLK_MrcCmd() and CLK_LrcCmd(), use DDL_DelayUS() to replace CLK_Delay()
|
|
- **cmp**
|
|
- Modify typo
|
|
- Add assert for IEN bit in GetCmpFuncStatusAndDisFunc function
|
|
- **crc**
|
|
- Reconstruct interface function relate to calculate CRC
|
|
- Modify return type of function CRC_DeInit
|
|
- Modify comment
|
|
- Delete and modify some of group/function relate to calculate CRC
|
|
- Optimize CRC_DeInit function
|
|
- Modify typo
|
|
- **dbgc**
|
|
- Add hc32_ll_dbgc driver
|
|
- **dcu**
|
|
- Modify macro-definition according to RM:DCU_CTL_COMP_TRG->DCU_CTL_COMPTRG
|
|
- Modify typo
|
|
- Modify API DCU_DeInit()
|
|
- Add CM_DCU4
|
|
- Modify function DCU_IntCmd() for misra
|
|
- **dma**
|
|
- Add API DMA_SetDataWidth()
|
|
- Modify typo
|
|
- Modify blocksize assert, 1024U is valid
|
|
- Optimize set blocksize & repeat count process
|
|
- **efm**
|
|
- Add FLASH security addr define
|
|
- Modify API EFM_Program()
|
|
- Modify assert IS_EFM_ADDR() range
|
|
- Modify API EFM_Protect_Enable()
|
|
- Modify typo
|
|
- Modify API EFM_WriteSecurityCode(), switch to read_only mode before exit
|
|
- Remove address assert from EFM_ReadByte()
|
|
- Refine EFM_SequenceProgram() & EFM_ChipErase(), and put them in RAM
|
|
- Fix bug of EFM_GetSwapStatus()
|
|
- **emb**
|
|
- Update EMB_CTL_CMPEN0~2 to EMB_CTL_CMPEN1~3
|
|
- Update EMB_INTEN_PORTINTEN to EMB_INTEN_PORTININTEN
|
|
- Update EMB_INTEN_PWMINTEN to EMB_INTEN_PWMSINTEN
|
|
- Function EMB_TMR4_Init don't call EMB_DeInit
|
|
- Function EMB_TMR6_Init don't call EMB_DeInit
|
|
- **event_port**
|
|
- Modify typo
|
|
- Modify for new head file
|
|
- **fcm**
|
|
- Modify API FCM_DeInit()
|
|
- **gpio**
|
|
- Rename GPIO_ExIntCmd() as GPIO_ExtIntCmd
|
|
- Modify GPIO_SetFunc()
|
|
- Optimize API: GPIO_Init(), GPIO_SetFunc(), GPIO_SubFuncCmd(), GPIO_InputMOSCmd(), GPIO_AnalogCmd(), GPIO_ExtIntCmd()
|
|
- **hash**
|
|
- Add HASH_DeInit function
|
|
- **i2c**
|
|
- Modify typo
|
|
- Move macro define I2C_SRC_CLK to head file
|
|
- Disable slave address function in I2C_Init()
|
|
- **i2s**
|
|
- Modify I2S_ClearStatus function
|
|
- **interrupts**
|
|
- IRQxxx_Handler add __DSB for Arm Errata 838869
|
|
- Modify micro define EIRQCFR_REG and EIRQFR_REG base RM
|
|
- Remove space line
|
|
- **keyscan**
|
|
- Add function KEYSCAN_DeInit
|
|
- **mpu**
|
|
- Modify typo
|
|
- Optimize MPU_ClearStatus function
|
|
- **ots**
|
|
- Modify API OTS_DeInit()
|
|
- Modify typo
|
|
- **pwc**
|
|
- Modify group PWC_Stop_Type
|
|
- Add function PWC_LVD_DeInit
|
|
- Modify the PWC_LVD_Detection_Voltage_Sel comment
|
|
- Modify typo
|
|
- Add api PWC_LVD_DeInit()
|
|
- Modify API PWC_STOP_Enter() & add assert IS_PWC_STOP_TYPE()
|
|
- **qspi**
|
|
- Modify return value type of QSPI_DeInit function
|
|
- Optimize QSPI_ClearStatus function
|
|
- **sdioc**
|
|
- Modify typo
|
|
- Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
|
|
- Rename function SDMMC_CMD1_SendOperatCond to SDMMC_CMD1_SendOperateCond
|
|
- Support CMD5/CMD52/CMD53
|
|
- Rename macro definition SDIOC_ACMD52_RW_DIRECT to SDIOC_CMD52_IO_RW_DIRECT
|
|
- Rename macro definition SDIOC_ACMD53_RW_EXTENDED to SDIOC_CMD53_IO_RW_EXTENDED
|
|
- Modify response type of MMC CMD3
|
|
- Optimize SDIOC_GetMode function
|
|
- **spi**
|
|
- Add SPI_SetSckPolarity,SPI_SetSckPhase functions
|
|
- Add group SPI_SCK_Polarity_Define, SPI_SCK_Phase_Define
|
|
- Modify return type of fuction SPI_DeInit
|
|
- Modify SPI_GetStatus,SPI_TxRx,SPI_Tx function
|
|
- **sram**
|
|
- Modify typo
|
|
- API fixed: SRAM_ClearStatus()
|
|
- API fixed: SRAM_SetWaitCycle()
|
|
- **swdt**
|
|
- Optimize SWDT_ClearStatus function timeout
|
|
- **tmr0**
|
|
- Modify typo
|
|
- **tmr4**
|
|
- Add the macros group @ref TMR4_OC_Output_Polarity
|
|
- Modify typo
|
|
- TMR4_OC_Buffer_Object group add macro-definition: TMR4_OC_BUF_NONE
|
|
- Modify API TMR4_DeInit
|
|
- Fix spell error about "response" that in function name
|
|
- Add function comments: macros group @ref TMR4_OC_Channel
|
|
- Modify function return value comments: TMR4_OC_GetPolarity
|
|
- Modify function parameter comments: TMR4_PWM_SetPolarity
|
|
- Modify function: TMR4_DeInit, TMR4_OC_DeInit, TMR4_PWM_DeInit, TMR4_EVT_DeInit
|
|
- Modify macro-definition: IS_TMR4_OC_BUF_OBJECT
|
|
- Fix magic number of function: TMR4_OC_StructInit
|
|
- Modify fuction:TMR4_PWM_Init
|
|
- Modify comment
|
|
- **tmr6**
|
|
- Modify for TMR6_Count_Mode_Define
|
|
- Delete union in stc_tmr6_init_t structure
|
|
- Add macro define for TMR6_Count_Dir_Status_Define
|
|
- Modify typo
|
|
- Modify API TMR6_GetCountDir()
|
|
- Modify API TMR6_Init()
|
|
- **tmra**
|
|
- Modify typo
|
|
- Update about split 16bit register TMRA_BCSTR into two 8bit registers TMRA_BCSTRH and TMRA_BCSTRL
|
|
- Delete union in stc_tmra_init_t structure
|
|
- Modify some of member type of struct stc_tmra_init_t and relate fuction about these member
|
|
- Modify macro-definition value for group TMRA_Interrupt_Type/TMRA_Status_Flag
|
|
- Rename marco definition IS_TMRA_CMPVAL_BUF_COND to IS_TMRA_BUF_TRANS_COND
|
|
- **trng**
|
|
- Add TRNG_Cmd,TRNG_DeInit functions
|
|
- API optimized for better random numbers: TRNG_GenerateRandom()
|
|
- API fixed: rewrite TRNG_GenerateRandom() to Support get multiple random data
|
|
- API optimized for better random numbers: TRNG_GenerateRandom(), TRNG_GetRandom()
|
|
- Add TRNG_Cmd,TRNG_DeInit functions and optimize TRNG_Start function
|
|
- Optimize the processing of discarded data and enable TRNG in TRNG_Init()
|
|
- **usart**
|
|
- Modify typo
|
|
- Change macro-definition: USART_DR_MPID -> USART_TDR_MPID
|
|
- Modify USART_SetTransType parameter: u32Type -> u16Type
|
|
- Modify USART_SC_ETU_CLK128/256 value
|
|
- Modify return type of function USART_DeInit
|
|
- Remove u32StopBit param from stc_usart_smartcard_init_t structure
|
|
- Add function note: USART_FuncCmd
|
|
- Round off baudrate fraction division
|
|
- Split register USART_DR to USART_RDR and USART_TDR
|
|
- Delete function: USART_GetUsartClockDiv
|
|
- Fix MISRAC2012 warning: USART_GetUsartClockFreq
|
|
- Code Refine
|
|
- Modify return type of function USART_DeInit()
|
|
- Modify USART_SmartCard_Init() for stc_usart_smartcard_init_t has modified(u32StopBit has removed)
|
|
- Fix bug: did not enable MP while USART_MultiProcessor_Init()
|
|
- API refined: USART_SetBaudrate()
|
|
- **usb**
|
|
- Modify typo
|
|
- Fix bug for function usb_clearepstall()
|
|
- **utility**
|
|
- Modify register USART DR to USART TDR
|
|
- Prohibit DDL_DelayMS and DDL_DelayUS functions from being optimized
|
|
- **wdt**
|
|
- Optimize WDT_ClearStatus function timeout
|
|
#### midwares
|
|
- ##### hc32/iec60730_class_b_stl
|
|
- Modify register USART DR to USART TDR
|
|
- ##### hc32/usb
|
|
- Modify for variable alignment
|
|
- Typo: Initailizes -> Initializes
|
|
- Modify API usb_dev_resume()
|
|
- Modify function usb_susp_isr()
|
|
- Modify for doxygen
|
|
- Replace MAX_CHNUM by USB_MAX_CH_NUM
|
|
- Delete micro define MAX_CHNUM
|
|
#### projects
|
|
- ##### ev_hc32f460_lqfp100_v2/applications
|
|
- **execute_inplace/qspi_xip**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- **functional_safety/iec60730_class_b**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Initialize XTAL32 using BSP_XTAL32_Init
|
|
- Modify sw_count field of stc_tmra_init_t: u16xxx -> u8xxx
|
|
- **iap/iap_app**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename function CRC_CalculateData8 to CRC_CRC16_Calculate
|
|
- **iap/iap_boot**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename function CRC_CalculateData8 to CRC_CRC16_Calculate
|
|
- **iap/iap_ymodem_app**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- **iap/iap_ymodem_boot**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- **usb/usb_dev_cdc**
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_cdc_msc**
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_hid_cdc**
|
|
- Rename EXINT_IrqCallback as EXTINT_IrqCallback
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_hid_custom**
|
|
- Rename EXINT_IrqCallback as EXTINT_IrqCallback
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_hid_msc**
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_mouse**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_dev_msc**
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_host_cdc**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_host_mouse_kb**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- **usb/usb_host_msc**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Rename UsbClockIni() as UsbClockInit()
|
|
- ##### ev_hc32f460_lqfp100_v2/examples
|
|
- **adc/adc_awd**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_base**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_channel_remap**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_dma**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_extended_channel**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_hard_trigger**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **adc/adc_pga**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **aes/aes_base**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **can/can_classical**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Modified the prescaler of CAN communication clock from 1 to 2.
|
|
- **can/can_ttcan**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- Modified the prescaler of CAN communication clock from 1 to 2.
|
|
- **clk/clk_switch_sysclk**
|
|
- Modify XTAL32 initialize process, use BSP_XTAL32_Init() to replace Xtal32Init()
|
|
- **crc/crc_hw_accumulate_check**
|
|
- Add crc_hw_accumulate_check example
|
|
- **crc/crc_hw_encode_hw_check**
|
|
- Functional reconstruction
|
|
- **crc/crc_hw_encode_sw_check**
|
|
- Functional reconstruction
|
|
- **dmac/dmac_base**
|
|
- Add DMA2_Error_IrqCallback function
|
|
- **efm/efm_chip_erase**
|
|
- Add efm_chip_erase example
|
|
- **efm/efm_sequence_program**
|
|
- Re-structure
|
|
- **efm/efm_swap**
|
|
- Use EFM_GetSwapStatus() to judge and use only K10 to swich swap status
|
|
- **emb/emb_cmp_brake_timer4**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_cmp_brake_timer6**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_osc_brake_timer4**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_osc_brake_timer6**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_port_brake_timer4**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_port_brake_timer6**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_pwm_brake_timer4**
|
|
- Typo: hander -> handler
|
|
- **emb/emb_pwm_brake_timer6**
|
|
- Typo: hander -> handler
|
|
- **hash/hash_base**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **i2c/i2c_master_polling**
|
|
- Add definition I2C_ADDR_MD as address condition select
|
|
- **i2c/i2c_slave_int**
|
|
- Add definition I2C_ADDR_MD as address condition select
|
|
- **i2c/i2c_slave_polling**
|
|
- Add definition I2C_ADDR_MD as address condition select
|
|
- **icg/icg_nmi_pin_hw_startup**
|
|
- NMI_Handler add __DSB for Arm Errata 838869
|
|
- **icg/icg_wdt_interrupt_hw_startup**
|
|
- Add delay before WDT_GetStatus function
|
|
- **intc/intc_nmi_xtalstop**
|
|
- NMI_Handler add __DSB for Arm Errata 838869
|
|
- **mpu/mpu_core_write_protect**
|
|
- Fixed parameters error of Core_MPU_Region_Size
|
|
- MemManage_Handler add __DSB for Arm Errata 838869
|
|
- Modify trigger condition for RTC protection
|
|
- Optimize RTC init sequence
|
|
- **mpu/mpu_dma_write_protect**
|
|
- NMI_Handler add __DSB for Arm Errata 838869
|
|
- Remove key jitter
|
|
- **mpu/mpu_ip_read_protect**
|
|
- BusFault_Handler add __DSB for Arm Errata 838869
|
|
- Optimize RTC init sequence
|
|
- **ots/ots_base**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **ots/ots_scaling_experiment**
|
|
- Set XTAL as system clock source
|
|
- Modify printf baudrate
|
|
- **pwc/pwc_lpc**
|
|
- Disable Xtal32 power while PD3
|
|
- **pwc/pwc_stop_wake**
|
|
- Support PWC_STOP_WFE
|
|
- **rtc/rtc_alarm**
|
|
- Optimize RTC init sequence
|
|
- Replace XTAL32_ClkInit to BSP_XTAL32_Init
|
|
- **rtc/rtc_calendar**
|
|
- Optimize RTC init sequence
|
|
- **rtc/rtc_calibration_output**
|
|
- Optimize RTC init sequence
|
|
- Replace XTAL32_ClkInit to BSP_XTAL32_Init
|
|
- **rtc/rtc_low_power**
|
|
- Optimize RTC init sequence
|
|
- **sdioc/sdioc_mmc**
|
|
- Modify RCA value about EMMC device
|
|
- Rename function SDMMC_CMD1_SendOperatCond to SDMMC_CMD1_SendOperateCond
|
|
- Rename MMC_CARD_STAT_PAG to MMC_CARD_STAT_PGM
|
|
- **sdioc/sdioc_sd**
|
|
- Rename function SDMMC_ACMD41_SendOperatCond to SDMMC_ACMD41_SendOperateCond
|
|
- **sdioc/sdioc_sdio**
|
|
- Add sdioc_sdio example
|
|
- **spi/spi_dma**
|
|
- Modify the IO properties of SPI
|
|
- **spi/spi_int**
|
|
- Modify the IO properties of SPI
|
|
- Modify rx interrupt priority of SPI
|
|
- **spi/spi_polling**
|
|
- Modify the IO properties of SPI
|
|
- Replace the tx&rx function of SPI
|
|
- **sram/sram_error_check**
|
|
- NMI_Handler add __DSB for Arm Errata 838869
|
|
- **systick/systick_int**
|
|
- SysTick_Handler add __DSB for Arm Errata 838869
|
|
- **timer0/timer0_basetimer**
|
|
- Replace XTAL32_Config to BSP_XTAL32_Init
|
|
- **timer4/timer4_event_compare**
|
|
- Update TMR4 event: EVT_SRC_TMR4_1_SCMP_UH -> EVT_SRC_TMR4_1_SCMP0
|
|
- **timer4/timer4_event_delay**
|
|
- Update TMR4 event: EVT_SRC_TMR4_1_SCMP_UH -> EVT_SRC_TMR4_1_SCMP0
|
|
- **timer4/timer4_pwm_through**
|
|
- Modify the initial configuration to achieve 0% or 100% duty cycle
|
|
- **timer6/timer6_32bit**
|
|
- Delete gpio initialize
|
|
- **timer6/timer6_capture**
|
|
- Modify the PWM stop polarity as high
|
|
- **timer6/timer6_capture_dual_buf**
|
|
- Modify the PWM stop polarity as high
|
|
- **timer6/timer6_cmp_deadtime**
|
|
- Remove redundant code
|
|
- **timer6/timer6_cmp_sawtooth**
|
|
- Remove redundant code
|
|
- **timer6/timer6_cmp_sawtooth_dual_buf**
|
|
- Remove redundant code
|
|
- **timer6/timer6_cmp_triangular_buf**
|
|
- Remove redundant code
|
|
- **timer6/timer6_hw_code_cnt**
|
|
- Modify debug info
|
|
- **timer6/timer6_hw_sta_stp_clr**
|
|
- Fix IO conflicts with printf: PE6->PB1
|
|
- **timer6/timer6_pulse_encoder_z_count**
|
|
- Add timer6_pulse_encoder_z_count example
|
|
- **timera/timera_capture**
|
|
- Set XTAL as system clock source
|
|
- **timera/timera_compare_value_buffer**
|
|
- Set XTAL as system clock source
|
|
- **timera/timera_pulse_encoder_z_count**
|
|
- Add timera_pulse_encoder_z_count example
|
|
- **trng/trng_base**
|
|
- Set XTAL as system clock source
|
|
- **usart/usart_clocksync_dma**
|
|
- Add usart_clocksync_dma example
|
|
- **usart/usart_smartcard_atr**
|
|
- Remove u32StopBit from stcSmartCardInit structure
|
|
- **usart/usart_uart_dma**
|
|
- Split register USART_DR to USART_RDR and USART_TDR
|
|
- **usart/usart_uart_multiprocessor**
|
|
- Optimize the RX process
|
|
- **wdt/wdt_interrupt_sw_startup**
|
|
- Add delay before WDT_GetStatus function
|
|
#### utils
|
|
------
|
|
## V3.1.0 Jan 15, 2023
|
|
#### documents
|
|
#### drivers
|
|
- ##### bsp/ev_hc32f460_lqfp100_v2
|
|
- Add configuration of XTAL IO as analog function
|
|
- Add XTAL/XTAL32 IO define
|
|
- Initialize CS state
|
|
- ##### cmsis/Device
|
|
- Modify headfile based on reference manual Rev1.5
|
|
- Delete the __low_level_init function of IAR and $Sub$$main function of MDK
|
|
- ##### hc32_ll_driver
|
|
- **generic**
|
|
- Modify version as 3.1.0
|
|
- Implemented the definition of __NO_INIT for AC6 and ARM Compiler
|
|
- ARM Compiler suppress warning message: diag_1296
|
|
- **interrupts_share**
|
|
- Rename I2Cx_Error_IrqHandler as I2Cx_EE_IrqHandler
|
|
- Bug fix of TMRA CMP DCU and USART, refine IRQ143
|
|
- **adc**
|
|
- Modify macro group definition: ADC_Scan_Mode, ADC_Sync_Unit, ADC_Sync_Mode
|
|
- API fixed: ADC_DeInit()
|
|
- **aos**
|
|
- Modified parameters name of API AOS_CommonTriggerCmd() and AOS_SetTriggerEventSrc()
|
|
- Macro name modified: from IS_AOS_TRIG_SEL to IS_AOS_TARGET
|
|
- Modified parameters name and comments of AOS_CommonTriggerCmd() and AOS_SetTriggerEventSrc()
|
|
- **can**
|
|
- Deleted redundant comments
|
|
- Remove CAN_FLAG_RX_BUF_OVF from CAN_FLAG_CLR_ALL
|
|
- API fixed: CAN_FillTxFrame(), CAN_GetStatus(), CAN_ClearStatus()
|
|
- **clk**
|
|
- Refine stc_clock_freq_t
|
|
- Fixed bug# GetClockFreq() API xtal32 value
|
|
- Optimize API CLK_SetCANClockSrc(), add assert IS_PWC_UNLOCKED()
|
|
- Modify CLK_PLL_FREQ_MAX value, remove redundant code
|
|
- **cmp**
|
|
- Modify macro define for API
|
|
- Code refine for scan function
|
|
- **crc**
|
|
- Add waiting time after write CRC data
|
|
- **dcu**
|
|
- Modify macro group comments: DCU_Interrupt_Type
|
|
- Synchronize register: DCU_INTSEL -> DCU_INTEVTSEL
|
|
- Modify function comments: DCU_IntCmd
|
|
- **dma**
|
|
- Modify DMA_StructInit() default value
|
|
- Modify DMA config API
|
|
- Modify API DMA_DeInit and add LLP address assert
|
|
- **efm**
|
|
- Add Flash protect level define
|
|
- Code refine
|
|
- Add API EFM_Protect_Enable & EFM_WriteSecurityCode
|
|
- Modify API EFM_Read & EFM_Program
|
|
- **emb**
|
|
- Modify structure comments:stc_emb_monitor_tmr_pwm_t
|
|
- Optimize function: EMB_TMR4_Init
|
|
- Optimize function: EMB_TMR6_Init
|
|
- **fcm**
|
|
- Modify parameter check for reference clock source
|
|
- **gpio**
|
|
- Add API GPIO_AnalogCmd() and GPIO_ExIntCmd()
|
|
- **i2c**
|
|
- Add API I2C_SlaveAddrCmd()
|
|
- Add API I2C_SlaveAddrCmd(), modify API I2C_SlaveAddrConfig()
|
|
- **interrupts**
|
|
- Delete comment code
|
|
- Add macro-definition: EIRQFR_REG/NMIENR_REG/INTWKEN_REG
|
|
- **ots**
|
|
- API fixed: OTS_CalculateTemp()
|
|
- **pwc**
|
|
- Refine API PWC_STOP_Enter()
|
|
- Bug fixed# PWC_PD_VdrCmd() and disable VDDR when enter PD3/4
|
|
- Optimize API PWC_STOP_ClockSelect() & comment
|
|
- Modify API PWC_HighSpeedToLowSpeed() & PWC_HighPerformanceToLowSpeed() base um_Rev1.42
|
|
- **qspi**
|
|
- Modify the conditions for entering direct communication mode
|
|
- **spi**
|
|
- Add frame level processing for API SPI_TxRx(),SPI_Tx()
|
|
- **sram**
|
|
- Deleted redundant comments
|
|
- **tmr4**
|
|
- Update API parameter u16IntType to u32IntType
|
|
- Modify macro-define: TMR4_OCSR_MASK
|
|
- Re-name parameter u16IntType to u32IntType
|
|
- Add RCSR register data type
|
|
- **tmr6**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- Modify macro define for group TMR6_hardware_xxx_condition_Define
|
|
- Modify macro define for group TMR6_HW_Count_xx_Cond_Define
|
|
- Modify macro define for group TMR6_Valid_Period_Count_Cond_Define
|
|
- Modify API TMR6_SetFilterClockDiv()
|
|
- Define variable in the beginning of the function
|
|
- **tmra**
|
|
- Comments optimization
|
|
- **trng**
|
|
- API fixed: TRNG_Init()
|
|
- **usart**
|
|
- Optimize UART DIV_Fraction calculation time
|
|
- Fix bug: expressions may cause overflow when calculate UART DIV_Fraction
|
|
- **usb**
|
|
- Add USB core ID select function
|
|
- Delete comment
|
|
- Add USB DMA function
|
|
- **utility**
|
|
- Support re-target printf for IAR EW version 9 or later
|
|
#### midwares
|
|
- ##### hc32/iec60730_class_b_stl
|
|
- Optimize macros definitions
|
|
- Modify USART_SR_TXE to USART_SR_TC in STL_ConsoleOutputChar()
|
|
- Fix warning: MISRAC2012-Rule-18.4
|
|
- Fix bug: Reading CC Build CRC32 value is error in release project
|
|
- ##### hc32/usb
|
|
- Add USB core ID select function
|
|
- Modify for MISRAC
|
|
- Delete comment
|
|
- Fix bug for USB endpoint GET_STATUS request
|
|
- Modify for variable alignment
|
|
- Add bot xfer error processing
|
|
- Remove msc bot reset operation
|
|
- Optimize for device insert detection
|
|
- Remove the judgment of ErrCnt when xfer error
|
|
#### projects
|
|
- ##### ev_hc32f460_lqfp100_v2/applications
|
|
- **functional_safety/iec60730_class_b**
|
|
- Add configuration of XTAL32 IO as analog function
|
|
- **iap/iap_boot**
|
|
- Add configuration of XTAL IO as analog function
|
|
- Replace PWC_HighPerformanceToLowSpeed to PWC_HighPerformanceToHighSpeed
|
|
- **iap/iap_ymodem_boot**
|
|
- Add configuration of XTAL IO as analog function
|
|
- Add print strings for download and upload completion
|
|
- **usb/usb_dev_cdc**
|
|
- Modify for MISRAC
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- **usb/usb_dev_cdc_msc**
|
|
- Modify for MISRAC
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- Modify Vendor Identification
|
|
- **usb/usb_dev_hid_cdc**
|
|
- Modify for MISRAC
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- **usb/usb_dev_hid_custom**
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- **usb/usb_dev_hid_msc**
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- Modify Vendor Identification
|
|
- **usb/usb_dev_mouse**
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- **usb/usb_dev_msc**
|
|
- Add USB core ID select function
|
|
- Modify DEV_MANUFACTURER_STRING
|
|
- Modify Vendor Identification
|
|
- **usb/usb_host_cdc**
|
|
- Add USB core ID select function
|
|
- **usb/usb_host_mouse_kb**
|
|
- Add USB core ID select function
|
|
- **usb/usb_host_msc**
|
|
- Add USB core ID select function
|
|
- Support LFN print
|
|
- Fix bug for device disconnect detect
|
|
- ##### ev_hc32f460_lqfp100_v2/examples
|
|
- **adc/adc_awd**
|
|
- Comment fixed
|
|
- **adc/adc_base**
|
|
- Add configuration of XTAL IO as analog function
|
|
- Add configuration usage of sampling time
|
|
- **can/can_classical**
|
|
- CAN_IrqCallback() fixed
|
|
- **can/can_ttcan**
|
|
- CAN_IrqCallback() fixed
|
|
- **clk/clk_switch_sysclk**
|
|
- Add configuration of XTAL/XTAL32 IO as analog function
|
|
- **clk/clk_xtalstop_detect**
|
|
- Add configuration of XTAL IO as analog function
|
|
- **cmp/cmp_normal_int**
|
|
- Modify for driver update
|
|
- **cmp/cmp_scan_mode**
|
|
- Modify for driver update
|
|
- **efm/efm_protect**
|
|
- Add efm_protect example
|
|
- **emb/emb_cmp_brake_timer4**
|
|
- Modify for driver update
|
|
- **emb/emb_cmp_brake_timer6**
|
|
- Modify for driver update
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **emb/emb_osc_brake_timer4**
|
|
- Add configuration of XTAL IO as analog function
|
|
- **emb/emb_osc_brake_timer6**
|
|
- Add configuration of XTAL IO as analog function
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **emb/emb_port_brake_timer6**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **emb/emb_pwm_brake_timer6**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **emb/emb_sw_brake_timer6**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **fcm/fcm_freq_measure**
|
|
- Add configuration of XTAL/XTAL32 IO as analog function
|
|
- Modify print process after clear flag in IRQ handle
|
|
- Modify reference clock for SWDTLRC
|
|
- **icg/icg_nmi_pin_hw_startup**
|
|
- Add NMI pin init
|
|
- **icg/icg_swdt_interrupt_hw_startup**
|
|
- Exchange LED color
|
|
- **icg/icg_wdt_interrupt_hw_startup**
|
|
- Exchange LED color
|
|
- **intc/intc_nmi_xtalstop**
|
|
- Add configuration of XTAL IO as analog function
|
|
- **ots/ots_base**
|
|
- Print log fixed
|
|
- **pwc/pwc_lpc**
|
|
- Code refine
|
|
- **pwc/pwc_lvd**
|
|
- Add filter configure to LVD initialize
|
|
- **pwc/pwc_lvd_ex**
|
|
- Add filter configure to LVD initialize
|
|
- **pwc/pwc_stop_wake**
|
|
- Code refine
|
|
- **rtc/rtc_alarm**
|
|
- Set XTAL32 pins to analog mode
|
|
- **rtc/rtc_calibration_output**
|
|
- Set XTAL32 pins to analog mode
|
|
- **rtc/rtc_low_power**
|
|
- Set XTAL32 pins to analog mode
|
|
- **sdioc/sdioc_mmc**
|
|
- Add the function to get extended CSD register
|
|
- **sdioc/sdioc_sd**
|
|
- Modify the error of CSD parameter calculation
|
|
- **timer0/timer0_basetimer**
|
|
- Add configuration of XTAL32 IO as analog function
|
|
- **timer6/timer6_32bit**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_capture**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- Modify macro define for group TMR6_hardware_xxx_condition_Define
|
|
- **timer6/timer6_capture_dual_buf**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- Modify macro define for group TMR6_hardware_xxx_condition_Define
|
|
- **timer6/timer6_cmp_deadtime**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_cmp_sawtooth**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_cmp_sawtooth_dual_buf**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_cmp_triangular_buf**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_define_pwm_number**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_hw_code_cnt**
|
|
- Modify macro define for group TMR6_HW_Count_xx_Cond_Define
|
|
- **timer6/timer6_hw_sta_stp_clr**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- Modify macro define for group TMR6_hardware_xxx_condition_Define
|
|
- **timer6/timer6_sw_sync**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timer6/timer6_valid_period**
|
|
- Modify structure stc_timer6_init_t to stc_tmr6_init_t
|
|
- **timera/timera_base_timer**
|
|
- Comments fixed
|
|
- **timera/timera_capture**
|
|
- TMRA_IrqCallback(): comment fixed, print log fixed
|
|
- **timera/timera_pwm**
|
|
- Comment fixed
|
|
- **usart/usart_clocksync_int**
|
|
- Read USART_DR.RDR when USART overrun error occur
|
|
- **usart/usart_smartcard_atr**
|
|
- Add delay time for smartcard cold reset
|
|
- Read USART_DR.RDR when USART overrun error occur
|
|
- **usart/usart_uart_dma**
|
|
- Delete the redundant code
|
|
- Read USART_DR.RDR when USART overrun error occur.
|
|
- Update UART timeout function calculating formula for Timer0 CMP value
|
|
- **usart/usart_uart_int**
|
|
- Read USART_DR.RDR when USART overrun error occur
|
|
- **usart/usart_uart_multiprocessor**
|
|
- Read USART_DR.RDR when USART overrun error occur
|
|
- **usart/usart_uart_polling**
|
|
- Read USART_DR.RDR when USART overrun error occur
|
|
- **wdt/wdt_interrupt_sw_startup**
|
|
- Exchange LED color
|
|
#### utils
|
|
------
|
|
## V3.0.0 Mar 31, 2022
|
|
- Initial release. |