256 lines
9.8 KiB
C
256 lines
9.8 KiB
C
/******************************************************************************
|
|
* @file nu_dac.h
|
|
* @version V1.00
|
|
* @brief M2354 series DAC driver header file
|
|
*
|
|
* @copyright SPDX-License-Identifier: Apache-2.0
|
|
* @copyright Copyright (C) 2020 Nuvoton Technology Corp. All rights reserved.
|
|
*****************************************************************************/
|
|
#ifndef __NU_DAC_H__
|
|
#define __NU_DAC_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
|
|
/** @addtogroup Standard_Driver Standard Driver
|
|
@{
|
|
*/
|
|
|
|
/** @addtogroup DAC_Driver DAC Driver
|
|
@{
|
|
*/
|
|
|
|
|
|
/** @addtogroup DAC_EXPORTED_CONSTANTS DAC Exported Constants
|
|
@{
|
|
*/
|
|
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* DAC_CTL Constant Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
#define DAC_CTL_LALIGN_RIGHT_ALIGN (0UL<<DAC_CTL_LALIGN_Pos) /*!< Right alignment. */
|
|
#define DAC_CTL_LALIGN_LEFT_ALIGN (1UL<<DAC_CTL_LALIGN_Pos) /*!< Left alignment */
|
|
|
|
#define DAC_WRITE_DAT_TRIGGER (0UL) /*!< Write DAC_DAT trigger */
|
|
#define DAC_SOFTWARE_TRIGGER (0UL|DAC_CTL_TRGEN_Msk) /*!< Software trigger */
|
|
#define DAC_LOW_LEVEL_TRIGGER ((0UL<<DAC_CTL_ETRGSEL_Pos)|(1UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< STDAC pin low level trigger */
|
|
#define DAC_HIGH_LEVEL_TRIGGER ((1UL<<DAC_CTL_ETRGSEL_Pos)|(1UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< STDAC pin high level trigger */
|
|
#define DAC_FALLING_EDGE_TRIGGER ((2UL<<DAC_CTL_ETRGSEL_Pos)|(1UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< STDAC pin falling edge trigger */
|
|
#define DAC_RISING_EDGE_TRIGGER ((3UL<<DAC_CTL_ETRGSEL_Pos)|(1UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< STDAC pin rising edge trigger */
|
|
#define DAC_TIMER0_TRIGGER ((2UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< Timer 0 trigger */
|
|
#define DAC_TIMER1_TRIGGER ((3UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< Timer 1 trigger */
|
|
#define DAC_TIMER2_TRIGGER ((4UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< Timer 2 trigger */
|
|
#define DAC_TIMER3_TRIGGER ((5UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< Timer 3 trigger */
|
|
#define DAC_EPWM0_TRIGGER ((6UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< EPWM0 trigger */
|
|
#define DAC_EPWM1_TRIGGER ((7UL<<DAC_CTL_TRGSEL_Pos)|DAC_CTL_TRGEN_Msk) /*!< EPWM1 trigger */
|
|
|
|
#define DAC_TRIGGER_MODE_DISABLE (0UL<<DAC_CTL_TRGEN_Pos) /*!< Trigger mode disable */
|
|
#define DAC_TRIGGER_MODE_ENABLE (1UL<<DAC_CTL_TRGEN_Pos) /*!< Trigger mode enable */
|
|
|
|
|
|
/**@}*/ /* end of group DAC_EXPORTED_CONSTANTS */
|
|
|
|
|
|
/** @addtogroup DAC_EXPORTED_FUNCTIONS DAC Exported Functions
|
|
@{
|
|
*/
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
/* DAC Macro Definitions */
|
|
/*---------------------------------------------------------------------------------------------------------*/
|
|
|
|
/**
|
|
* @brief Start the D/A conversion.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details User writes SWTRG bit (DAC_SWTRG[0]) to generate one shot pulse and it is cleared to 0 by hardware automatically.
|
|
*/
|
|
#define DAC_START_CONV(dac) ((dac)->SWTRG = DAC_SWTRG_SWTRG_Msk)
|
|
|
|
/**
|
|
* @brief Enable DAC data left-aligned.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details User has to load data into DAC_DAT[15:4] bits. DAC_DAT[31:16] and DAC_DAT[3:0] are ignored in DAC conversion.
|
|
*/
|
|
#define DAC_ENABLE_LEFT_ALIGN(dac) ((dac)->CTL |= DAC_CTL_LALIGN_Msk)
|
|
|
|
/**
|
|
* @brief Enable DAC data right-aligned.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details User has to load data into DAC_DAT[11:0] bits, DAC_DAT[31:12] are ignored in DAC conversion.
|
|
*/
|
|
#define DAC_ENABLE_RIGHT_ALIGN(dac) ((dac)->CTL &= ~DAC_CTL_LALIGN_Msk)
|
|
|
|
/**
|
|
* @brief Enable output voltage buffer.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details The DAC integrates a voltage output buffer that can be used to reduce output impedance and
|
|
* drive external loads directly without having to add an external operational amplifier.
|
|
*/
|
|
#define DAC_ENABLE_BYPASS_BUFFER(dac) ((dac)->CTL |= DAC_CTL_BYPASS_Msk)
|
|
|
|
/**
|
|
* @brief Disable output voltage buffer.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details This macro is used to disable output voltage buffer.
|
|
*/
|
|
#define DAC_DISABLE_BYPASS_BUFFER(dac) ((dac)->CTL &= ~DAC_CTL_BYPASS_Msk)
|
|
|
|
/**
|
|
* @brief Enable the interrupt.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @return None
|
|
* @details This macro is used to enable DAC interrupt.
|
|
*/
|
|
#define DAC_ENABLE_INT(dac, u32Ch) ((dac)->CTL |= DAC_CTL_DACIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable the interrupt.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @return None
|
|
* @details This macro is used to disable DAC interrupt.
|
|
*/
|
|
#define DAC_DISABLE_INT(dac, u32Ch) ((dac)->CTL &= ~DAC_CTL_DACIEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable DMA under-run interrupt.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details This macro is used to enable DMA under-run interrupt.
|
|
*/
|
|
#define DAC_ENABLE_DMAUDR_INT(dac) ((dac)->CTL |= DAC_CTL_DMAURIEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable DMA under-run interrupt.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details This macro is used to disable DMA under-run interrupt.
|
|
*/
|
|
#define DAC_DISABLE_DMAUDR_INT(dac) ((dac)->CTL &= ~DAC_CTL_DMAURIEN_Msk)
|
|
|
|
/**
|
|
* @brief Enable PDMA mode.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details DAC DMA request is generated when a hardware trigger event occurs while DMAEN (DAC_CTL[2]) is set.
|
|
*/
|
|
#define DAC_ENABLE_PDMA(dac) ((dac)->CTL |= DAC_CTL_DMAEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable PDMA mode.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details This macro is used to disable DMA mode.
|
|
*/
|
|
#define DAC_DISABLE_PDMA(dac) ((dac)->CTL &= ~DAC_CTL_DMAEN_Msk)
|
|
|
|
/**
|
|
* @brief Write data for conversion.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @param[in] u32Data Decides the data for conversion, valid range are between 0~0xFFF.
|
|
* @return None
|
|
* @details 12 bit left alignment: user has to load data into DAC_DAT[15:4] bits.
|
|
* 12 bit right alignment: user has to load data into DAC_DAT[11:0] bits.
|
|
*/
|
|
#define DAC_WRITE_DATA(dac, u32Ch, u32Data) ((dac)->DAT = (u32Data))
|
|
|
|
/**
|
|
* @brief Read DAC 12-bit holding data.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @return Return DAC 12-bit holding data.
|
|
* @details This macro is used to read DAC_DAT register.
|
|
*/
|
|
#define DAC_READ_DATA(dac, u32Ch) ((dac)->DAT)
|
|
|
|
/**
|
|
* @brief Get the busy state of DAC.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @retval 0 Idle state.
|
|
* @retval 1 Busy state.
|
|
* @details This macro is used to read BUSY bit (DAC_STATUS[8]) to get busy state.
|
|
*/
|
|
#define DAC_IS_BUSY(dac, u32Ch) (((dac)->STATUS & DAC_STATUS_BUSY_Msk) >> DAC_STATUS_BUSY_Pos)
|
|
|
|
/**
|
|
* @brief Get the interrupt flag.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @retval 0 DAC is in conversion state.
|
|
* @retval 1 DAC conversion finish.
|
|
* @details This macro is used to read FINISH bit (DAC_STATUS[0]) to get DAC conversion complete finish flag.
|
|
*/
|
|
#define DAC_GET_INT_FLAG(dac, u32Ch) ((dac)->STATUS & DAC_STATUS_FINISH_Msk)
|
|
|
|
/**
|
|
* @brief Get the DMA under-run flag.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @retval 0 No DMA under-run error condition occurred.
|
|
* @retval 1 DMA under-run error condition occurred.
|
|
* @details This macro is used to read DMAUDR bit (DAC_STATUS[1]) to get DMA under-run state.
|
|
*/
|
|
#define DAC_GET_DMAUDR_FLAG(dac) (((dac)->STATUS & DAC_STATUS_DMAUDR_Msk) >> DAC_STATUS_DMAUDR_Pos)
|
|
|
|
/**
|
|
* @brief This macro clear the interrupt status bit.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @param[in] u32Ch Not used in M2355 Series DAC.
|
|
* @return None
|
|
* @details User writes FINISH bit (DAC_STATUS[0]) to clear DAC conversion complete finish flag.
|
|
*/
|
|
#define DAC_CLR_INT_FLAG(dac, u32Ch) ((dac)->STATUS = DAC_STATUS_FINISH_Msk)
|
|
|
|
/**
|
|
* @brief This macro clear the DMA under-run flag.
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @details User writes DMAUDR bit (DAC_STATUS[1]) to clear DMA under-run flag.
|
|
*/
|
|
#define DAC_CLR_DMAUDR_FLAG(dac) ((dac)->STATUS = DAC_STATUS_DMAUDR_Msk)
|
|
|
|
|
|
/**
|
|
* @brief Enable DAC group mode
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @note Only DAC0 has this control bit.
|
|
* \hideinitializer
|
|
*/
|
|
#define DAC_ENABLE_GROUP_MODE(dac) ((dac)->CTL |= DAC_CTL_GRPEN_Msk)
|
|
|
|
/**
|
|
* @brief Disable DAC group mode
|
|
* @param[in] dac The pointer of the specified DAC module.
|
|
* @return None
|
|
* @note Only DAC0 has this control bit.
|
|
* \hideinitializer
|
|
*/
|
|
#define DAC_DISABLE_GROUP_MODE(dac) ((dac)->CTL &= ~DAC_CTL_GRPEN_Msk)
|
|
|
|
void DAC_Open(DAC_T *dac, uint32_t u32Ch, uint32_t u32TrgSrc);
|
|
void DAC_Close(DAC_T *dac, uint32_t u32Ch);
|
|
uint32_t DAC_SetDelayTime(DAC_T *dac, uint32_t u32Delay);
|
|
|
|
/**@}*/ /* end of group DAC_EXPORTED_FUNCTIONS */
|
|
|
|
/**@}*/ /* end of group DAC_Driver */
|
|
|
|
/**@}*/ /* end of group Standard_Driver */
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif /* __NU_DAC_H__ */
|
|
|