rt-thread/bsp/lm3s9b9x/Libraries/inc/hw_nvic.h

1027 lines
58 KiB
C

//*****************************************************************************
//
// hw_nvic.h - Macros used when accessing the NVIC hardware.
//
// Copyright (c) 2005-2010 Texas Instruments Incorporated. All rights reserved.
// Software License Agreement
//
// Texas Instruments (TI) is supplying this software for use solely and
// exclusively on TI's microcontroller products. The software is owned by
// TI and/or its suppliers, and is protected under applicable copyright
// laws. You may not combine this software with "viral" open-source
// software in order to form a larger program.
//
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
// DAMAGES, FOR ANY REASON WHATSOEVER.
//
// This is part of revision 6459 of the Stellaris Firmware Development Package.
//
//*****************************************************************************
#ifndef __HW_NVIC_H__
#define __HW_NVIC_H__
//*****************************************************************************
//
// The following are defines for the NVIC register addresses.
//
//*****************************************************************************
#define NVIC_INT_TYPE 0xE000E004 // Interrupt Controller Type Reg
#define NVIC_ST_CTRL 0xE000E010 // SysTick Control and Status Reg
#define NVIC_ST_RELOAD 0xE000E014 // SysTick Reload Value Register
#define NVIC_ST_CURRENT 0xE000E018 // SysTick Current Value Register
#define NVIC_ST_CAL 0xE000E01C // SysTick Calibration Value Reg
#define NVIC_EN0 0xE000E100 // IRQ 0 to 31 Set Enable Register
#define NVIC_EN1 0xE000E104 // IRQ 32 to 63 Set Enable Register
#define NVIC_DIS0 0xE000E180 // IRQ 0 to 31 Clear Enable Reg
#define NVIC_DIS1 0xE000E184 // IRQ 32 to 63 Clear Enable Reg
#define NVIC_PEND0 0xE000E200 // IRQ 0 to 31 Set Pending Register
#define NVIC_PEND1 0xE000E204 // IRQ 32 to 63 Set Pending Reg
#define NVIC_UNPEND0 0xE000E280 // IRQ 0 to 31 Clear Pending Reg
#define NVIC_UNPEND1 0xE000E284 // IRQ 32 to 63 Clear Pending Reg
#define NVIC_ACTIVE0 0xE000E300 // IRQ 0 to 31 Active Register
#define NVIC_ACTIVE1 0xE000E304 // IRQ 32 to 63 Active Register
#define NVIC_PRI0 0xE000E400 // IRQ 0 to 3 Priority Register
#define NVIC_PRI1 0xE000E404 // IRQ 4 to 7 Priority Register
#define NVIC_PRI2 0xE000E408 // IRQ 8 to 11 Priority Register
#define NVIC_PRI3 0xE000E40C // IRQ 12 to 15 Priority Register
#define NVIC_PRI4 0xE000E410 // IRQ 16 to 19 Priority Register
#define NVIC_PRI5 0xE000E414 // IRQ 20 to 23 Priority Register
#define NVIC_PRI6 0xE000E418 // IRQ 24 to 27 Priority Register
#define NVIC_PRI7 0xE000E41C // IRQ 28 to 31 Priority Register
#define NVIC_PRI8 0xE000E420 // IRQ 32 to 35 Priority Register
#define NVIC_PRI9 0xE000E424 // IRQ 36 to 39 Priority Register
#define NVIC_PRI10 0xE000E428 // IRQ 40 to 43 Priority Register
#define NVIC_PRI11 0xE000E42C // IRQ 44 to 47 Priority Register
#define NVIC_PRI12 0xE000E430 // IRQ 48 to 51 Priority Register
#define NVIC_PRI13 0xE000E434 // IRQ 52 to 55 Priority Register
#define NVIC_CPUID 0xE000ED00 // CPUID Base Register
#define NVIC_INT_CTRL 0xE000ED04 // Interrupt Control State Register
#define NVIC_VTABLE 0xE000ED08 // Vector Table Offset Register
#define NVIC_APINT 0xE000ED0C // App. Int & Reset Control Reg
#define NVIC_SYS_CTRL 0xE000ED10 // System Control Register
#define NVIC_CFG_CTRL 0xE000ED14 // Configuration Control Register
#define NVIC_SYS_PRI1 0xE000ED18 // Sys. Handlers 4 to 7 Priority
#define NVIC_SYS_PRI2 0xE000ED1C // Sys. Handlers 8 to 11 Priority
#define NVIC_SYS_PRI3 0xE000ED20 // Sys. Handlers 12 to 15 Priority
#define NVIC_SYS_HND_CTRL 0xE000ED24 // System Handler Control and State
#define NVIC_FAULT_STAT 0xE000ED28 // Configurable Fault Status Reg
#define NVIC_HFAULT_STAT 0xE000ED2C // Hard Fault Status Register
#define NVIC_DEBUG_STAT 0xE000ED30 // Debug Status Register
#define NVIC_MM_ADDR 0xE000ED34 // Mem Manage Address Register
#define NVIC_FAULT_ADDR 0xE000ED38 // Bus Fault Address Register
#define NVIC_MPU_TYPE 0xE000ED90 // MPU Type Register
#define NVIC_MPU_CTRL 0xE000ED94 // MPU Control Register
#define NVIC_MPU_NUMBER 0xE000ED98 // MPU Region Number Register
#define NVIC_MPU_BASE 0xE000ED9C // MPU Region Base Address Register
#define NVIC_MPU_ATTR 0xE000EDA0 // MPU Region Attribute & Size Reg
#define NVIC_DBG_CTRL 0xE000EDF0 // Debug Control and Status Reg
#define NVIC_DBG_XFER 0xE000EDF4 // Debug Core Reg. Transfer Select
#define NVIC_DBG_DATA 0xE000EDF8 // Debug Core Register Data
#define NVIC_DBG_INT 0xE000EDFC // Debug Reset Interrupt Control
#define NVIC_SW_TRIG 0xE000EF00 // Software Trigger Interrupt Reg
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_TYPE register.
//
//*****************************************************************************
#define NVIC_INT_TYPE_LINES_M 0x0000001F // Number of interrupt lines (x32)
#define NVIC_INT_TYPE_LINES_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CTRL register.
//
//*****************************************************************************
#define NVIC_ST_CTRL_COUNT 0x00010000 // Count flag
#define NVIC_ST_CTRL_CLK_SRC 0x00000004 // Clock Source
#define NVIC_ST_CTRL_INTEN 0x00000002 // Interrupt enable
#define NVIC_ST_CTRL_ENABLE 0x00000001 // Counter mode
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_RELOAD register.
//
//*****************************************************************************
#define NVIC_ST_RELOAD_M 0x00FFFFFF // Counter load value
#define NVIC_ST_RELOAD_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CURRENT
// register.
//
//*****************************************************************************
#define NVIC_ST_CURRENT_M 0x00FFFFFF // Counter current value
#define NVIC_ST_CURRENT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ST_CAL register.
//
//*****************************************************************************
#define NVIC_ST_CAL_NOREF 0x80000000 // No reference clock
#define NVIC_ST_CAL_SKEW 0x40000000 // Clock skew
#define NVIC_ST_CAL_ONEMS_M 0x00FFFFFF // 1ms reference value
#define NVIC_ST_CAL_ONEMS_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN0 register.
//
//*****************************************************************************
#define NVIC_EN0_INT31 0x80000000 // Interrupt 31 enable
#define NVIC_EN0_INT30 0x40000000 // Interrupt 30 enable
#define NVIC_EN0_INT29 0x20000000 // Interrupt 29 enable
#define NVIC_EN0_INT28 0x10000000 // Interrupt 28 enable
#define NVIC_EN0_INT27 0x08000000 // Interrupt 27 enable
#define NVIC_EN0_INT26 0x04000000 // Interrupt 26 enable
#define NVIC_EN0_INT25 0x02000000 // Interrupt 25 enable
#define NVIC_EN0_INT24 0x01000000 // Interrupt 24 enable
#define NVIC_EN0_INT23 0x00800000 // Interrupt 23 enable
#define NVIC_EN0_INT22 0x00400000 // Interrupt 22 enable
#define NVIC_EN0_INT21 0x00200000 // Interrupt 21 enable
#define NVIC_EN0_INT20 0x00100000 // Interrupt 20 enable
#define NVIC_EN0_INT19 0x00080000 // Interrupt 19 enable
#define NVIC_EN0_INT18 0x00040000 // Interrupt 18 enable
#define NVIC_EN0_INT17 0x00020000 // Interrupt 17 enable
#define NVIC_EN0_INT16 0x00010000 // Interrupt 16 enable
#define NVIC_EN0_INT15 0x00008000 // Interrupt 15 enable
#define NVIC_EN0_INT14 0x00004000 // Interrupt 14 enable
#define NVIC_EN0_INT13 0x00002000 // Interrupt 13 enable
#define NVIC_EN0_INT12 0x00001000 // Interrupt 12 enable
#define NVIC_EN0_INT11 0x00000800 // Interrupt 11 enable
#define NVIC_EN0_INT10 0x00000400 // Interrupt 10 enable
#define NVIC_EN0_INT9 0x00000200 // Interrupt 9 enable
#define NVIC_EN0_INT8 0x00000100 // Interrupt 8 enable
#define NVIC_EN0_INT7 0x00000080 // Interrupt 7 enable
#define NVIC_EN0_INT6 0x00000040 // Interrupt 6 enable
#define NVIC_EN0_INT5 0x00000020 // Interrupt 5 enable
#define NVIC_EN0_INT4 0x00000010 // Interrupt 4 enable
#define NVIC_EN0_INT3 0x00000008 // Interrupt 3 enable
#define NVIC_EN0_INT2 0x00000004 // Interrupt 2 enable
#define NVIC_EN0_INT1 0x00000002 // Interrupt 1 enable
#define NVIC_EN0_INT0 0x00000001 // Interrupt 0 enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_EN1 register.
//
//*****************************************************************************
#define NVIC_EN1_INT59 0x08000000 // Interrupt 59 enable
#define NVIC_EN1_INT58 0x04000000 // Interrupt 58 enable
#define NVIC_EN1_INT57 0x02000000 // Interrupt 57 enable
#define NVIC_EN1_INT56 0x01000000 // Interrupt 56 enable
#define NVIC_EN1_INT55 0x00800000 // Interrupt 55 enable
#define NVIC_EN1_INT54 0x00400000 // Interrupt 54 enable
#define NVIC_EN1_INT53 0x00200000 // Interrupt 53 enable
#define NVIC_EN1_INT52 0x00100000 // Interrupt 52 enable
#define NVIC_EN1_INT51 0x00080000 // Interrupt 51 enable
#define NVIC_EN1_INT50 0x00040000 // Interrupt 50 enable
#define NVIC_EN1_INT49 0x00020000 // Interrupt 49 enable
#define NVIC_EN1_INT48 0x00010000 // Interrupt 48 enable
#define NVIC_EN1_INT47 0x00008000 // Interrupt 47 enable
#define NVIC_EN1_INT46 0x00004000 // Interrupt 46 enable
#define NVIC_EN1_INT45 0x00002000 // Interrupt 45 enable
#define NVIC_EN1_INT44 0x00001000 // Interrupt 44 enable
#define NVIC_EN1_INT43 0x00000800 // Interrupt 43 enable
#define NVIC_EN1_INT42 0x00000400 // Interrupt 42 enable
#define NVIC_EN1_INT41 0x00000200 // Interrupt 41 enable
#define NVIC_EN1_INT40 0x00000100 // Interrupt 40 enable
#define NVIC_EN1_INT39 0x00000080 // Interrupt 39 enable
#define NVIC_EN1_INT38 0x00000040 // Interrupt 38 enable
#define NVIC_EN1_INT37 0x00000020 // Interrupt 37 enable
#define NVIC_EN1_INT36 0x00000010 // Interrupt 36 enable
#define NVIC_EN1_INT35 0x00000008 // Interrupt 35 enable
#define NVIC_EN1_INT34 0x00000004 // Interrupt 34 enable
#define NVIC_EN1_INT33 0x00000002 // Interrupt 33 enable
#define NVIC_EN1_INT32 0x00000001 // Interrupt 32 enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS0 register.
//
//*****************************************************************************
#define NVIC_DIS0_INT31 0x80000000 // Interrupt 31 disable
#define NVIC_DIS0_INT30 0x40000000 // Interrupt 30 disable
#define NVIC_DIS0_INT29 0x20000000 // Interrupt 29 disable
#define NVIC_DIS0_INT28 0x10000000 // Interrupt 28 disable
#define NVIC_DIS0_INT27 0x08000000 // Interrupt 27 disable
#define NVIC_DIS0_INT26 0x04000000 // Interrupt 26 disable
#define NVIC_DIS0_INT25 0x02000000 // Interrupt 25 disable
#define NVIC_DIS0_INT24 0x01000000 // Interrupt 24 disable
#define NVIC_DIS0_INT23 0x00800000 // Interrupt 23 disable
#define NVIC_DIS0_INT22 0x00400000 // Interrupt 22 disable
#define NVIC_DIS0_INT21 0x00200000 // Interrupt 21 disable
#define NVIC_DIS0_INT20 0x00100000 // Interrupt 20 disable
#define NVIC_DIS0_INT19 0x00080000 // Interrupt 19 disable
#define NVIC_DIS0_INT18 0x00040000 // Interrupt 18 disable
#define NVIC_DIS0_INT17 0x00020000 // Interrupt 17 disable
#define NVIC_DIS0_INT16 0x00010000 // Interrupt 16 disable
#define NVIC_DIS0_INT15 0x00008000 // Interrupt 15 disable
#define NVIC_DIS0_INT14 0x00004000 // Interrupt 14 disable
#define NVIC_DIS0_INT13 0x00002000 // Interrupt 13 disable
#define NVIC_DIS0_INT12 0x00001000 // Interrupt 12 disable
#define NVIC_DIS0_INT11 0x00000800 // Interrupt 11 disable
#define NVIC_DIS0_INT10 0x00000400 // Interrupt 10 disable
#define NVIC_DIS0_INT9 0x00000200 // Interrupt 9 disable
#define NVIC_DIS0_INT8 0x00000100 // Interrupt 8 disable
#define NVIC_DIS0_INT7 0x00000080 // Interrupt 7 disable
#define NVIC_DIS0_INT6 0x00000040 // Interrupt 6 disable
#define NVIC_DIS0_INT5 0x00000020 // Interrupt 5 disable
#define NVIC_DIS0_INT4 0x00000010 // Interrupt 4 disable
#define NVIC_DIS0_INT3 0x00000008 // Interrupt 3 disable
#define NVIC_DIS0_INT2 0x00000004 // Interrupt 2 disable
#define NVIC_DIS0_INT1 0x00000002 // Interrupt 1 disable
#define NVIC_DIS0_INT0 0x00000001 // Interrupt 0 disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DIS1 register.
//
//*****************************************************************************
#define NVIC_DIS1_INT59 0x08000000 // Interrupt 59 disable
#define NVIC_DIS1_INT58 0x04000000 // Interrupt 58 disable
#define NVIC_DIS1_INT57 0x02000000 // Interrupt 57 disable
#define NVIC_DIS1_INT56 0x01000000 // Interrupt 56 disable
#define NVIC_DIS1_INT55 0x00800000 // Interrupt 55 disable
#define NVIC_DIS1_INT54 0x00400000 // Interrupt 54 disable
#define NVIC_DIS1_INT53 0x00200000 // Interrupt 53 disable
#define NVIC_DIS1_INT52 0x00100000 // Interrupt 52 disable
#define NVIC_DIS1_INT51 0x00080000 // Interrupt 51 disable
#define NVIC_DIS1_INT50 0x00040000 // Interrupt 50 disable
#define NVIC_DIS1_INT49 0x00020000 // Interrupt 49 disable
#define NVIC_DIS1_INT48 0x00010000 // Interrupt 48 disable
#define NVIC_DIS1_INT47 0x00008000 // Interrupt 47 disable
#define NVIC_DIS1_INT46 0x00004000 // Interrupt 46 disable
#define NVIC_DIS1_INT45 0x00002000 // Interrupt 45 disable
#define NVIC_DIS1_INT44 0x00001000 // Interrupt 44 disable
#define NVIC_DIS1_INT43 0x00000800 // Interrupt 43 disable
#define NVIC_DIS1_INT42 0x00000400 // Interrupt 42 disable
#define NVIC_DIS1_INT41 0x00000200 // Interrupt 41 disable
#define NVIC_DIS1_INT40 0x00000100 // Interrupt 40 disable
#define NVIC_DIS1_INT39 0x00000080 // Interrupt 39 disable
#define NVIC_DIS1_INT38 0x00000040 // Interrupt 38 disable
#define NVIC_DIS1_INT37 0x00000020 // Interrupt 37 disable
#define NVIC_DIS1_INT36 0x00000010 // Interrupt 36 disable
#define NVIC_DIS1_INT35 0x00000008 // Interrupt 35 disable
#define NVIC_DIS1_INT34 0x00000004 // Interrupt 34 disable
#define NVIC_DIS1_INT33 0x00000002 // Interrupt 33 disable
#define NVIC_DIS1_INT32 0x00000001 // Interrupt 32 disable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND0 register.
//
//*****************************************************************************
#define NVIC_PEND0_INT31 0x80000000 // Interrupt 31 pend
#define NVIC_PEND0_INT30 0x40000000 // Interrupt 30 pend
#define NVIC_PEND0_INT29 0x20000000 // Interrupt 29 pend
#define NVIC_PEND0_INT28 0x10000000 // Interrupt 28 pend
#define NVIC_PEND0_INT27 0x08000000 // Interrupt 27 pend
#define NVIC_PEND0_INT26 0x04000000 // Interrupt 26 pend
#define NVIC_PEND0_INT25 0x02000000 // Interrupt 25 pend
#define NVIC_PEND0_INT24 0x01000000 // Interrupt 24 pend
#define NVIC_PEND0_INT23 0x00800000 // Interrupt 23 pend
#define NVIC_PEND0_INT22 0x00400000 // Interrupt 22 pend
#define NVIC_PEND0_INT21 0x00200000 // Interrupt 21 pend
#define NVIC_PEND0_INT20 0x00100000 // Interrupt 20 pend
#define NVIC_PEND0_INT19 0x00080000 // Interrupt 19 pend
#define NVIC_PEND0_INT18 0x00040000 // Interrupt 18 pend
#define NVIC_PEND0_INT17 0x00020000 // Interrupt 17 pend
#define NVIC_PEND0_INT16 0x00010000 // Interrupt 16 pend
#define NVIC_PEND0_INT15 0x00008000 // Interrupt 15 pend
#define NVIC_PEND0_INT14 0x00004000 // Interrupt 14 pend
#define NVIC_PEND0_INT13 0x00002000 // Interrupt 13 pend
#define NVIC_PEND0_INT12 0x00001000 // Interrupt 12 pend
#define NVIC_PEND0_INT11 0x00000800 // Interrupt 11 pend
#define NVIC_PEND0_INT10 0x00000400 // Interrupt 10 pend
#define NVIC_PEND0_INT9 0x00000200 // Interrupt 9 pend
#define NVIC_PEND0_INT8 0x00000100 // Interrupt 8 pend
#define NVIC_PEND0_INT7 0x00000080 // Interrupt 7 pend
#define NVIC_PEND0_INT6 0x00000040 // Interrupt 6 pend
#define NVIC_PEND0_INT5 0x00000020 // Interrupt 5 pend
#define NVIC_PEND0_INT4 0x00000010 // Interrupt 4 pend
#define NVIC_PEND0_INT3 0x00000008 // Interrupt 3 pend
#define NVIC_PEND0_INT2 0x00000004 // Interrupt 2 pend
#define NVIC_PEND0_INT1 0x00000002 // Interrupt 1 pend
#define NVIC_PEND0_INT0 0x00000001 // Interrupt 0 pend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PEND1 register.
//
//*****************************************************************************
#define NVIC_PEND1_INT59 0x08000000 // Interrupt 59 pend
#define NVIC_PEND1_INT58 0x04000000 // Interrupt 58 pend
#define NVIC_PEND1_INT57 0x02000000 // Interrupt 57 pend
#define NVIC_PEND1_INT56 0x01000000 // Interrupt 56 pend
#define NVIC_PEND1_INT55 0x00800000 // Interrupt 55 pend
#define NVIC_PEND1_INT54 0x00400000 // Interrupt 54 pend
#define NVIC_PEND1_INT53 0x00200000 // Interrupt 53 pend
#define NVIC_PEND1_INT52 0x00100000 // Interrupt 52 pend
#define NVIC_PEND1_INT51 0x00080000 // Interrupt 51 pend
#define NVIC_PEND1_INT50 0x00040000 // Interrupt 50 pend
#define NVIC_PEND1_INT49 0x00020000 // Interrupt 49 pend
#define NVIC_PEND1_INT48 0x00010000 // Interrupt 48 pend
#define NVIC_PEND1_INT47 0x00008000 // Interrupt 47 pend
#define NVIC_PEND1_INT46 0x00004000 // Interrupt 46 pend
#define NVIC_PEND1_INT45 0x00002000 // Interrupt 45 pend
#define NVIC_PEND1_INT44 0x00001000 // Interrupt 44 pend
#define NVIC_PEND1_INT43 0x00000800 // Interrupt 43 pend
#define NVIC_PEND1_INT42 0x00000400 // Interrupt 42 pend
#define NVIC_PEND1_INT41 0x00000200 // Interrupt 41 pend
#define NVIC_PEND1_INT40 0x00000100 // Interrupt 40 pend
#define NVIC_PEND1_INT39 0x00000080 // Interrupt 39 pend
#define NVIC_PEND1_INT38 0x00000040 // Interrupt 38 pend
#define NVIC_PEND1_INT37 0x00000020 // Interrupt 37 pend
#define NVIC_PEND1_INT36 0x00000010 // Interrupt 36 pend
#define NVIC_PEND1_INT35 0x00000008 // Interrupt 35 pend
#define NVIC_PEND1_INT34 0x00000004 // Interrupt 34 pend
#define NVIC_PEND1_INT33 0x00000002 // Interrupt 33 pend
#define NVIC_PEND1_INT32 0x00000001 // Interrupt 32 pend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND0 register.
//
//*****************************************************************************
#define NVIC_UNPEND0_INT31 0x80000000 // Interrupt 31 unpend
#define NVIC_UNPEND0_INT30 0x40000000 // Interrupt 30 unpend
#define NVIC_UNPEND0_INT29 0x20000000 // Interrupt 29 unpend
#define NVIC_UNPEND0_INT28 0x10000000 // Interrupt 28 unpend
#define NVIC_UNPEND0_INT27 0x08000000 // Interrupt 27 unpend
#define NVIC_UNPEND0_INT26 0x04000000 // Interrupt 26 unpend
#define NVIC_UNPEND0_INT25 0x02000000 // Interrupt 25 unpend
#define NVIC_UNPEND0_INT24 0x01000000 // Interrupt 24 unpend
#define NVIC_UNPEND0_INT23 0x00800000 // Interrupt 23 unpend
#define NVIC_UNPEND0_INT22 0x00400000 // Interrupt 22 unpend
#define NVIC_UNPEND0_INT21 0x00200000 // Interrupt 21 unpend
#define NVIC_UNPEND0_INT20 0x00100000 // Interrupt 20 unpend
#define NVIC_UNPEND0_INT19 0x00080000 // Interrupt 19 unpend
#define NVIC_UNPEND0_INT18 0x00040000 // Interrupt 18 unpend
#define NVIC_UNPEND0_INT17 0x00020000 // Interrupt 17 unpend
#define NVIC_UNPEND0_INT16 0x00010000 // Interrupt 16 unpend
#define NVIC_UNPEND0_INT15 0x00008000 // Interrupt 15 unpend
#define NVIC_UNPEND0_INT14 0x00004000 // Interrupt 14 unpend
#define NVIC_UNPEND0_INT13 0x00002000 // Interrupt 13 unpend
#define NVIC_UNPEND0_INT12 0x00001000 // Interrupt 12 unpend
#define NVIC_UNPEND0_INT11 0x00000800 // Interrupt 11 unpend
#define NVIC_UNPEND0_INT10 0x00000400 // Interrupt 10 unpend
#define NVIC_UNPEND0_INT9 0x00000200 // Interrupt 9 unpend
#define NVIC_UNPEND0_INT8 0x00000100 // Interrupt 8 unpend
#define NVIC_UNPEND0_INT7 0x00000080 // Interrupt 7 unpend
#define NVIC_UNPEND0_INT6 0x00000040 // Interrupt 6 unpend
#define NVIC_UNPEND0_INT5 0x00000020 // Interrupt 5 unpend
#define NVIC_UNPEND0_INT4 0x00000010 // Interrupt 4 unpend
#define NVIC_UNPEND0_INT3 0x00000008 // Interrupt 3 unpend
#define NVIC_UNPEND0_INT2 0x00000004 // Interrupt 2 unpend
#define NVIC_UNPEND0_INT1 0x00000002 // Interrupt 1 unpend
#define NVIC_UNPEND0_INT0 0x00000001 // Interrupt 0 unpend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_UNPEND1 register.
//
//*****************************************************************************
#define NVIC_UNPEND1_INT59 0x08000000 // Interrupt 59 unpend
#define NVIC_UNPEND1_INT58 0x04000000 // Interrupt 58 unpend
#define NVIC_UNPEND1_INT57 0x02000000 // Interrupt 57 unpend
#define NVIC_UNPEND1_INT56 0x01000000 // Interrupt 56 unpend
#define NVIC_UNPEND1_INT55 0x00800000 // Interrupt 55 unpend
#define NVIC_UNPEND1_INT54 0x00400000 // Interrupt 54 unpend
#define NVIC_UNPEND1_INT53 0x00200000 // Interrupt 53 unpend
#define NVIC_UNPEND1_INT52 0x00100000 // Interrupt 52 unpend
#define NVIC_UNPEND1_INT51 0x00080000 // Interrupt 51 unpend
#define NVIC_UNPEND1_INT50 0x00040000 // Interrupt 50 unpend
#define NVIC_UNPEND1_INT49 0x00020000 // Interrupt 49 unpend
#define NVIC_UNPEND1_INT48 0x00010000 // Interrupt 48 unpend
#define NVIC_UNPEND1_INT47 0x00008000 // Interrupt 47 unpend
#define NVIC_UNPEND1_INT46 0x00004000 // Interrupt 46 unpend
#define NVIC_UNPEND1_INT45 0x00002000 // Interrupt 45 unpend
#define NVIC_UNPEND1_INT44 0x00001000 // Interrupt 44 unpend
#define NVIC_UNPEND1_INT43 0x00000800 // Interrupt 43 unpend
#define NVIC_UNPEND1_INT42 0x00000400 // Interrupt 42 unpend
#define NVIC_UNPEND1_INT41 0x00000200 // Interrupt 41 unpend
#define NVIC_UNPEND1_INT40 0x00000100 // Interrupt 40 unpend
#define NVIC_UNPEND1_INT39 0x00000080 // Interrupt 39 unpend
#define NVIC_UNPEND1_INT38 0x00000040 // Interrupt 38 unpend
#define NVIC_UNPEND1_INT37 0x00000020 // Interrupt 37 unpend
#define NVIC_UNPEND1_INT36 0x00000010 // Interrupt 36 unpend
#define NVIC_UNPEND1_INT35 0x00000008 // Interrupt 35 unpend
#define NVIC_UNPEND1_INT34 0x00000004 // Interrupt 34 unpend
#define NVIC_UNPEND1_INT33 0x00000002 // Interrupt 33 unpend
#define NVIC_UNPEND1_INT32 0x00000001 // Interrupt 32 unpend
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE0 register.
//
//*****************************************************************************
#define NVIC_ACTIVE0_INT31 0x80000000 // Interrupt 31 active
#define NVIC_ACTIVE0_INT30 0x40000000 // Interrupt 30 active
#define NVIC_ACTIVE0_INT29 0x20000000 // Interrupt 29 active
#define NVIC_ACTIVE0_INT28 0x10000000 // Interrupt 28 active
#define NVIC_ACTIVE0_INT27 0x08000000 // Interrupt 27 active
#define NVIC_ACTIVE0_INT26 0x04000000 // Interrupt 26 active
#define NVIC_ACTIVE0_INT25 0x02000000 // Interrupt 25 active
#define NVIC_ACTIVE0_INT24 0x01000000 // Interrupt 24 active
#define NVIC_ACTIVE0_INT23 0x00800000 // Interrupt 23 active
#define NVIC_ACTIVE0_INT22 0x00400000 // Interrupt 22 active
#define NVIC_ACTIVE0_INT21 0x00200000 // Interrupt 21 active
#define NVIC_ACTIVE0_INT20 0x00100000 // Interrupt 20 active
#define NVIC_ACTIVE0_INT19 0x00080000 // Interrupt 19 active
#define NVIC_ACTIVE0_INT18 0x00040000 // Interrupt 18 active
#define NVIC_ACTIVE0_INT17 0x00020000 // Interrupt 17 active
#define NVIC_ACTIVE0_INT16 0x00010000 // Interrupt 16 active
#define NVIC_ACTIVE0_INT15 0x00008000 // Interrupt 15 active
#define NVIC_ACTIVE0_INT14 0x00004000 // Interrupt 14 active
#define NVIC_ACTIVE0_INT13 0x00002000 // Interrupt 13 active
#define NVIC_ACTIVE0_INT12 0x00001000 // Interrupt 12 active
#define NVIC_ACTIVE0_INT11 0x00000800 // Interrupt 11 active
#define NVIC_ACTIVE0_INT10 0x00000400 // Interrupt 10 active
#define NVIC_ACTIVE0_INT9 0x00000200 // Interrupt 9 active
#define NVIC_ACTIVE0_INT8 0x00000100 // Interrupt 8 active
#define NVIC_ACTIVE0_INT7 0x00000080 // Interrupt 7 active
#define NVIC_ACTIVE0_INT6 0x00000040 // Interrupt 6 active
#define NVIC_ACTIVE0_INT5 0x00000020 // Interrupt 5 active
#define NVIC_ACTIVE0_INT4 0x00000010 // Interrupt 4 active
#define NVIC_ACTIVE0_INT3 0x00000008 // Interrupt 3 active
#define NVIC_ACTIVE0_INT2 0x00000004 // Interrupt 2 active
#define NVIC_ACTIVE0_INT1 0x00000002 // Interrupt 1 active
#define NVIC_ACTIVE0_INT0 0x00000001 // Interrupt 0 active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_ACTIVE1 register.
//
//*****************************************************************************
#define NVIC_ACTIVE1_INT59 0x08000000 // Interrupt 59 active
#define NVIC_ACTIVE1_INT58 0x04000000 // Interrupt 58 active
#define NVIC_ACTIVE1_INT57 0x02000000 // Interrupt 57 active
#define NVIC_ACTIVE1_INT56 0x01000000 // Interrupt 56 active
#define NVIC_ACTIVE1_INT55 0x00800000 // Interrupt 55 active
#define NVIC_ACTIVE1_INT54 0x00400000 // Interrupt 54 active
#define NVIC_ACTIVE1_INT53 0x00200000 // Interrupt 53 active
#define NVIC_ACTIVE1_INT52 0x00100000 // Interrupt 52 active
#define NVIC_ACTIVE1_INT51 0x00080000 // Interrupt 51 active
#define NVIC_ACTIVE1_INT50 0x00040000 // Interrupt 50 active
#define NVIC_ACTIVE1_INT49 0x00020000 // Interrupt 49 active
#define NVIC_ACTIVE1_INT48 0x00010000 // Interrupt 48 active
#define NVIC_ACTIVE1_INT47 0x00008000 // Interrupt 47 active
#define NVIC_ACTIVE1_INT46 0x00004000 // Interrupt 46 active
#define NVIC_ACTIVE1_INT45 0x00002000 // Interrupt 45 active
#define NVIC_ACTIVE1_INT44 0x00001000 // Interrupt 44 active
#define NVIC_ACTIVE1_INT43 0x00000800 // Interrupt 43 active
#define NVIC_ACTIVE1_INT42 0x00000400 // Interrupt 42 active
#define NVIC_ACTIVE1_INT41 0x00000200 // Interrupt 41 active
#define NVIC_ACTIVE1_INT40 0x00000100 // Interrupt 40 active
#define NVIC_ACTIVE1_INT39 0x00000080 // Interrupt 39 active
#define NVIC_ACTIVE1_INT38 0x00000040 // Interrupt 38 active
#define NVIC_ACTIVE1_INT37 0x00000020 // Interrupt 37 active
#define NVIC_ACTIVE1_INT36 0x00000010 // Interrupt 36 active
#define NVIC_ACTIVE1_INT35 0x00000008 // Interrupt 35 active
#define NVIC_ACTIVE1_INT34 0x00000004 // Interrupt 34 active
#define NVIC_ACTIVE1_INT33 0x00000002 // Interrupt 33 active
#define NVIC_ACTIVE1_INT32 0x00000001 // Interrupt 32 active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI0 register.
//
//*****************************************************************************
#define NVIC_PRI0_INT3_M 0xFF000000 // Interrupt 3 priority mask
#define NVIC_PRI0_INT2_M 0x00FF0000 // Interrupt 2 priority mask
#define NVIC_PRI0_INT1_M 0x0000FF00 // Interrupt 1 priority mask
#define NVIC_PRI0_INT0_M 0x000000FF // Interrupt 0 priority mask
#define NVIC_PRI0_INT3_S 24
#define NVIC_PRI0_INT2_S 16
#define NVIC_PRI0_INT1_S 8
#define NVIC_PRI0_INT0_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI1 register.
//
//*****************************************************************************
#define NVIC_PRI1_INT7_M 0xFF000000 // Interrupt 7 priority mask
#define NVIC_PRI1_INT6_M 0x00FF0000 // Interrupt 6 priority mask
#define NVIC_PRI1_INT5_M 0x0000FF00 // Interrupt 5 priority mask
#define NVIC_PRI1_INT4_M 0x000000FF // Interrupt 4 priority mask
#define NVIC_PRI1_INT7_S 24
#define NVIC_PRI1_INT6_S 16
#define NVIC_PRI1_INT5_S 8
#define NVIC_PRI1_INT4_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI2 register.
//
//*****************************************************************************
#define NVIC_PRI2_INT11_M 0xFF000000 // Interrupt 11 priority mask
#define NVIC_PRI2_INT10_M 0x00FF0000 // Interrupt 10 priority mask
#define NVIC_PRI2_INT9_M 0x0000FF00 // Interrupt 9 priority mask
#define NVIC_PRI2_INT8_M 0x000000FF // Interrupt 8 priority mask
#define NVIC_PRI2_INT11_S 24
#define NVIC_PRI2_INT10_S 16
#define NVIC_PRI2_INT9_S 8
#define NVIC_PRI2_INT8_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI3 register.
//
//*****************************************************************************
#define NVIC_PRI3_INT15_M 0xFF000000 // Interrupt 15 priority mask
#define NVIC_PRI3_INT14_M 0x00FF0000 // Interrupt 14 priority mask
#define NVIC_PRI3_INT13_M 0x0000FF00 // Interrupt 13 priority mask
#define NVIC_PRI3_INT12_M 0x000000FF // Interrupt 12 priority mask
#define NVIC_PRI3_INT15_S 24
#define NVIC_PRI3_INT14_S 16
#define NVIC_PRI3_INT13_S 8
#define NVIC_PRI3_INT12_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI4 register.
//
//*****************************************************************************
#define NVIC_PRI4_INT19_M 0xFF000000 // Interrupt 19 priority mask
#define NVIC_PRI4_INT18_M 0x00FF0000 // Interrupt 18 priority mask
#define NVIC_PRI4_INT17_M 0x0000FF00 // Interrupt 17 priority mask
#define NVIC_PRI4_INT16_M 0x000000FF // Interrupt 16 priority mask
#define NVIC_PRI4_INT19_S 24
#define NVIC_PRI4_INT18_S 16
#define NVIC_PRI4_INT17_S 8
#define NVIC_PRI4_INT16_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI5 register.
//
//*****************************************************************************
#define NVIC_PRI5_INT23_M 0xFF000000 // Interrupt 23 priority mask
#define NVIC_PRI5_INT22_M 0x00FF0000 // Interrupt 22 priority mask
#define NVIC_PRI5_INT21_M 0x0000FF00 // Interrupt 21 priority mask
#define NVIC_PRI5_INT20_M 0x000000FF // Interrupt 20 priority mask
#define NVIC_PRI5_INT23_S 24
#define NVIC_PRI5_INT22_S 16
#define NVIC_PRI5_INT21_S 8
#define NVIC_PRI5_INT20_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI6 register.
//
//*****************************************************************************
#define NVIC_PRI6_INT27_M 0xFF000000 // Interrupt 27 priority mask
#define NVIC_PRI6_INT26_M 0x00FF0000 // Interrupt 26 priority mask
#define NVIC_PRI6_INT25_M 0x0000FF00 // Interrupt 25 priority mask
#define NVIC_PRI6_INT24_M 0x000000FF // Interrupt 24 priority mask
#define NVIC_PRI6_INT27_S 24
#define NVIC_PRI6_INT26_S 16
#define NVIC_PRI6_INT25_S 8
#define NVIC_PRI6_INT24_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI7 register.
//
//*****************************************************************************
#define NVIC_PRI7_INT31_M 0xFF000000 // Interrupt 31 priority mask
#define NVIC_PRI7_INT30_M 0x00FF0000 // Interrupt 30 priority mask
#define NVIC_PRI7_INT29_M 0x0000FF00 // Interrupt 29 priority mask
#define NVIC_PRI7_INT28_M 0x000000FF // Interrupt 28 priority mask
#define NVIC_PRI7_INT31_S 24
#define NVIC_PRI7_INT30_S 16
#define NVIC_PRI7_INT29_S 8
#define NVIC_PRI7_INT28_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI8 register.
//
//*****************************************************************************
#define NVIC_PRI8_INT35_M 0xFF000000 // Interrupt 35 priority mask
#define NVIC_PRI8_INT34_M 0x00FF0000 // Interrupt 34 priority mask
#define NVIC_PRI8_INT33_M 0x0000FF00 // Interrupt 33 priority mask
#define NVIC_PRI8_INT32_M 0x000000FF // Interrupt 32 priority mask
#define NVIC_PRI8_INT35_S 24
#define NVIC_PRI8_INT34_S 16
#define NVIC_PRI8_INT33_S 8
#define NVIC_PRI8_INT32_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI9 register.
//
//*****************************************************************************
#define NVIC_PRI9_INT39_M 0xFF000000 // Interrupt 39 priority mask
#define NVIC_PRI9_INT38_M 0x00FF0000 // Interrupt 38 priority mask
#define NVIC_PRI9_INT37_M 0x0000FF00 // Interrupt 37 priority mask
#define NVIC_PRI9_INT36_M 0x000000FF // Interrupt 36 priority mask
#define NVIC_PRI9_INT39_S 24
#define NVIC_PRI9_INT38_S 16
#define NVIC_PRI9_INT37_S 8
#define NVIC_PRI9_INT36_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_PRI10 register.
//
//*****************************************************************************
#define NVIC_PRI10_INT43_M 0xFF000000 // Interrupt 43 priority mask
#define NVIC_PRI10_INT42_M 0x00FF0000 // Interrupt 42 priority mask
#define NVIC_PRI10_INT41_M 0x0000FF00 // Interrupt 41 priority mask
#define NVIC_PRI10_INT40_M 0x000000FF // Interrupt 40 priority mask
#define NVIC_PRI10_INT43_S 24
#define NVIC_PRI10_INT42_S 16
#define NVIC_PRI10_INT41_S 8
#define NVIC_PRI10_INT40_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CPUID register.
//
//*****************************************************************************
#define NVIC_CPUID_IMP_M 0xFF000000 // Implementer
#define NVIC_CPUID_VAR_M 0x00F00000 // Variant
#define NVIC_CPUID_PARTNO_M 0x0000FFF0 // Processor part number
#define NVIC_CPUID_REV_M 0x0000000F // Revision
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_INT_CTRL register.
//
//*****************************************************************************
#define NVIC_INT_CTRL_NMI_SET 0x80000000 // Pend a NMI
#define NVIC_INT_CTRL_PEND_SV 0x10000000 // Pend a PendSV
#define NVIC_INT_CTRL_UNPEND_SV 0x08000000 // Unpend a PendSV
#define NVIC_INT_CTRL_PENDSTSET 0x04000000 // Set pending SysTick interrupt
#define NVIC_INT_CTRL_PENDSTCLR 0x02000000 // Clear pending SysTick interrupt
#define NVIC_INT_CTRL_ISR_PRE 0x00800000 // Debug interrupt handling
#define NVIC_INT_CTRL_ISR_PEND 0x00400000 // Debug interrupt pending
#define NVIC_INT_CTRL_VEC_PEN_M 0x003FF000 // Highest pending exception
#define NVIC_INT_CTRL_RET_BASE 0x00000800 // Return to base
#define NVIC_INT_CTRL_VEC_ACT_M 0x000003FF // Current active exception
#define NVIC_INT_CTRL_VEC_PEN_S 12
#define NVIC_INT_CTRL_VEC_ACT_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_VTABLE register.
//
//*****************************************************************************
#define NVIC_VTABLE_BASE 0x20000000 // Vector table base
#define NVIC_VTABLE_OFFSET_M 0x1FFFFF00 // Vector table offset
#define NVIC_VTABLE_OFFSET_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_APINT register.
//
//*****************************************************************************
#define NVIC_APINT_VECTKEY_M 0xFFFF0000 // Vector key mask
#define NVIC_APINT_VECTKEY 0x05FA0000 // Vector key
#define NVIC_APINT_ENDIANESS 0x00008000 // Data endianess
#define NVIC_APINT_PRIGROUP_M 0x00000700 // Priority group
#define NVIC_APINT_PRIGROUP_7_1 0x00000000 // Priority group 7.1 split
#define NVIC_APINT_PRIGROUP_6_2 0x00000100 // Priority group 6.2 split
#define NVIC_APINT_PRIGROUP_5_3 0x00000200 // Priority group 5.3 split
#define NVIC_APINT_PRIGROUP_4_4 0x00000300 // Priority group 4.4 split
#define NVIC_APINT_PRIGROUP_3_5 0x00000400 // Priority group 3.5 split
#define NVIC_APINT_PRIGROUP_2_6 0x00000500 // Priority group 2.6 split
#define NVIC_APINT_PRIGROUP_1_7 0x00000600 // Priority group 1.7 split
#define NVIC_APINT_PRIGROUP_0_8 0x00000700 // Priority group 0.8 split
#define NVIC_APINT_SYSRESETREQ 0x00000004 // System reset request
#define NVIC_APINT_VECT_CLR_ACT 0x00000002 // Clear active NMI/fault info
#define NVIC_APINT_VECT_RESET 0x00000001 // System reset
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_CTRL register.
//
//*****************************************************************************
#define NVIC_SYS_CTRL_SEVONPEND 0x00000010 // Wakeup on pend
#define NVIC_SYS_CTRL_SLEEPDEEP 0x00000004 // Deep sleep enable
#define NVIC_SYS_CTRL_SLEEPEXIT 0x00000002 // Sleep on ISR exit
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_CFG_CTRL register.
//
//*****************************************************************************
#define NVIC_CFG_CTRL_BFHFNMIGN 0x00000100 // Ignore bus fault in NMI/fault
#define NVIC_CFG_CTRL_DIV0 0x00000010 // Trap on divide by 0
#define NVIC_CFG_CTRL_UNALIGNED 0x00000008 // Trap on unaligned access
#define NVIC_CFG_CTRL_DEEP_PEND 0x00000004 // Allow deep interrupt trigger
#define NVIC_CFG_CTRL_MAIN_PEND 0x00000002 // Allow main interrupt trigger
#define NVIC_CFG_CTRL_BASE_THR 0x00000001 // Thread state control
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI1 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI1_RES_M 0xFF000000 // Priority of reserved handler
#define NVIC_SYS_PRI1_USAGE_M 0x00FF0000 // Priority of usage fault handler
#define NVIC_SYS_PRI1_BUS_M 0x0000FF00 // Priority of bus fault handler
#define NVIC_SYS_PRI1_MEM_M 0x000000FF // Priority of mem manage handler
#define NVIC_SYS_PRI1_USAGE_S 16
#define NVIC_SYS_PRI1_BUS_S 8
#define NVIC_SYS_PRI1_MEM_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI2 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI2_SVC_M 0xFF000000 // Priority of SVCall handler
#define NVIC_SYS_PRI2_RES_M 0x00FFFFFF // Priority of reserved handlers
#define NVIC_SYS_PRI2_SVC_S 24
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_PRI3 register.
//
//*****************************************************************************
#define NVIC_SYS_PRI3_TICK_M 0xFF000000 // Priority of Sys Tick handler
#define NVIC_SYS_PRI3_PENDSV_M 0x00FF0000 // Priority of PendSV handler
#define NVIC_SYS_PRI3_RES_M 0x0000FF00 // Priority of reserved handler
#define NVIC_SYS_PRI3_DEBUG_M 0x000000FF // Priority of debug handler
#define NVIC_SYS_PRI3_TICK_S 24
#define NVIC_SYS_PRI3_PENDSV_S 16
#define NVIC_SYS_PRI3_DEBUG_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SYS_HND_CTRL
// register.
//
//*****************************************************************************
#define NVIC_SYS_HND_CTRL_USAGE 0x00040000 // Usage fault enable
#define NVIC_SYS_HND_CTRL_BUS 0x00020000 // Bus fault enable
#define NVIC_SYS_HND_CTRL_MEM 0x00010000 // Mem manage fault enable
#define NVIC_SYS_HND_CTRL_SVC 0x00008000 // SVCall is pended
#define NVIC_SYS_HND_CTRL_BUSP 0x00004000 // Bus fault is pended
#define NVIC_SYS_HND_CTRL_TICK 0x00000800 // Sys tick is active
#define NVIC_SYS_HND_CTRL_PNDSV 0x00000400 // PendSV is active
#define NVIC_SYS_HND_CTRL_MON 0x00000100 // Monitor is active
#define NVIC_SYS_HND_CTRL_SVCA 0x00000080 // SVCall is active
#define NVIC_SYS_HND_CTRL_USGA 0x00000008 // Usage fault is active
#define NVIC_SYS_HND_CTRL_BUSA 0x00000002 // Bus fault is active
#define NVIC_SYS_HND_CTRL_MEMA 0x00000001 // Mem manage is active
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_FAULT_STAT_DIV0 0x02000000 // Divide by zero fault
#define NVIC_FAULT_STAT_UNALIGN 0x01000000 // Unaligned access fault
#define NVIC_FAULT_STAT_NOCP 0x00080000 // No coprocessor fault
#define NVIC_FAULT_STAT_INVPC 0x00040000 // Invalid PC fault
#define NVIC_FAULT_STAT_INVSTAT 0x00020000 // Invalid state fault
#define NVIC_FAULT_STAT_UNDEF 0x00010000 // Undefined instruction fault
#define NVIC_FAULT_STAT_BFARV 0x00008000 // BFAR is valid
#define NVIC_FAULT_STAT_BSTKE 0x00001000 // Stack bus fault
#define NVIC_FAULT_STAT_BUSTKE 0x00000800 // Unstack bus fault
#define NVIC_FAULT_STAT_IMPRE 0x00000400 // Imprecise data bus error
#define NVIC_FAULT_STAT_PRECISE 0x00000200 // Precise data bus error
#define NVIC_FAULT_STAT_IBUS 0x00000100 // Instruction bus fault
#define NVIC_FAULT_STAT_MMARV 0x00000080 // MMAR is valid
#define NVIC_FAULT_STAT_MSTKE 0x00000010 // Stack access violation
#define NVIC_FAULT_STAT_MUSTKE 0x00000008 // Unstack access violation
#define NVIC_FAULT_STAT_DERR 0x00000002 // Data access violation
#define NVIC_FAULT_STAT_IERR 0x00000001 // Instruction access violation
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_HFAULT_STAT
// register.
//
//*****************************************************************************
#define NVIC_HFAULT_STAT_DBG 0x80000000 // Debug event
#define NVIC_HFAULT_STAT_FORCED 0x40000000 // Cannot execute fault handler
#define NVIC_HFAULT_STAT_VECT 0x00000002 // Vector table read fault
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DEBUG_STAT
// register.
//
//*****************************************************************************
#define NVIC_DEBUG_STAT_EXTRNL 0x00000010 // EDBGRQ asserted
#define NVIC_DEBUG_STAT_VCATCH 0x00000008 // Vector catch
#define NVIC_DEBUG_STAT_DWTTRAP 0x00000004 // DWT match
#define NVIC_DEBUG_STAT_BKPT 0x00000002 // Breakpoint instruction
#define NVIC_DEBUG_STAT_HALTED 0x00000001 // Halt request
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MM_ADDR register.
//
//*****************************************************************************
#define NVIC_MM_ADDR_M 0xFFFFFFFF // Data fault address
#define NVIC_MM_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_FAULT_ADDR
// register.
//
//*****************************************************************************
#define NVIC_FAULT_ADDR_M 0xFFFFFFFF // Data bus fault address
#define NVIC_FAULT_ADDR_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_TYPE register.
//
//*****************************************************************************
#define NVIC_MPU_TYPE_IREGION_M 0x00FF0000 // Number of I regions
#define NVIC_MPU_TYPE_DREGION_M 0x0000FF00 // Number of D regions
#define NVIC_MPU_TYPE_SEPARATE 0x00000001 // Separate or unified MPU
#define NVIC_MPU_TYPE_IREGION_S 16
#define NVIC_MPU_TYPE_DREGION_S 8
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_CTRL register.
//
//*****************************************************************************
#define NVIC_MPU_CTRL_PRIVDEFEN 0x00000004 // MPU default region in priv mode
#define NVIC_MPU_CTRL_HFNMIENA 0x00000002 // MPU enabled during faults
#define NVIC_MPU_CTRL_ENABLE 0x00000001 // MPU enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_NUMBER
// register.
//
//*****************************************************************************
#define NVIC_MPU_NUMBER_M 0x000000FF // MPU region to access
#define NVIC_MPU_NUMBER_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_BASE register.
//
//*****************************************************************************
#define NVIC_MPU_BASE_ADDR_M 0xFFFFFFE0 // Base address mask
#define NVIC_MPU_BASE_VALID 0x00000010 // Region number valid
#define NVIC_MPU_BASE_REGION_M 0x0000000F // Region number
#define NVIC_MPU_BASE_ADDR_S 8
#define NVIC_MPU_BASE_REGION_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_MPU_ATTR register.
//
//*****************************************************************************
#define NVIC_MPU_ATTR_M 0xFFFF0000 // Attributes
#define NVIC_MPU_ATTR_AP_NO_NO 0x00000000 // prv: no access, usr: no access
#define NVIC_MPU_ATTR_BUFFRABLE 0x00010000 // Bufferable
#define NVIC_MPU_ATTR_CACHEABLE 0x00020000 // Cacheable
#define NVIC_MPU_ATTR_SHAREABLE 0x00040000 // Shareable
#define NVIC_MPU_ATTR_TEX_M 0x00380000 // Type extension mask
#define NVIC_MPU_ATTR_AP_RW_NO 0x01000000 // prv: rw, usr: none
#define NVIC_MPU_ATTR_AP_RW_RO 0x02000000 // prv: rw, usr: read-only
#define NVIC_MPU_ATTR_AP_RW_RW 0x03000000 // prv: rw, usr: rw
#define NVIC_MPU_ATTR_AP_RO_NO 0x05000000 // prv: ro, usr: none
#define NVIC_MPU_ATTR_AP_RO_RO 0x06000000 // prv: ro, usr: ro
#define NVIC_MPU_ATTR_AP_M 0x07000000 // Access permissions mask
#define NVIC_MPU_ATTR_XN 0x10000000 // Execute disable
#define NVIC_MPU_ATTR_SRD_M 0x0000FF00 // Sub-region disable mask
#define NVIC_MPU_ATTR_SRD_0 0x00000100 // Sub-region 0 disable
#define NVIC_MPU_ATTR_SRD_1 0x00000200 // Sub-region 1 disable
#define NVIC_MPU_ATTR_SRD_2 0x00000400 // Sub-region 2 disable
#define NVIC_MPU_ATTR_SRD_3 0x00000800 // Sub-region 3 disable
#define NVIC_MPU_ATTR_SRD_4 0x00001000 // Sub-region 4 disable
#define NVIC_MPU_ATTR_SRD_5 0x00002000 // Sub-region 5 disable
#define NVIC_MPU_ATTR_SRD_6 0x00004000 // Sub-region 6 disable
#define NVIC_MPU_ATTR_SRD_7 0x00008000 // Sub-region 7 disable
#define NVIC_MPU_ATTR_SIZE_M 0x0000003E // Region size mask
#define NVIC_MPU_ATTR_SIZE_32B 0x00000008 // Region size 32 bytes
#define NVIC_MPU_ATTR_SIZE_64B 0x0000000A // Region size 64 bytes
#define NVIC_MPU_ATTR_SIZE_128B 0x0000000C // Region size 128 bytes
#define NVIC_MPU_ATTR_SIZE_256B 0x0000000E // Region size 256 bytes
#define NVIC_MPU_ATTR_SIZE_512B 0x00000010 // Region size 512 bytes
#define NVIC_MPU_ATTR_SIZE_1K 0x00000012 // Region size 1 Kbytes
#define NVIC_MPU_ATTR_SIZE_2K 0x00000014 // Region size 2 Kbytes
#define NVIC_MPU_ATTR_SIZE_4K 0x00000016 // Region size 4 Kbytes
#define NVIC_MPU_ATTR_SIZE_8K 0x00000018 // Region size 8 Kbytes
#define NVIC_MPU_ATTR_SIZE_16K 0x0000001A // Region size 16 Kbytes
#define NVIC_MPU_ATTR_SIZE_32K 0x0000001C // Region size 32 Kbytes
#define NVIC_MPU_ATTR_SIZE_64K 0x0000001E // Region size 64 Kbytes
#define NVIC_MPU_ATTR_SIZE_128K 0x00000020 // Region size 128 Kbytes
#define NVIC_MPU_ATTR_SIZE_256K 0x00000022 // Region size 256 Kbytes
#define NVIC_MPU_ATTR_SIZE_512K 0x00000024 // Region size 512 Kbytes
#define NVIC_MPU_ATTR_SIZE_1M 0x00000026 // Region size 1 Mbytes
#define NVIC_MPU_ATTR_SIZE_2M 0x00000028 // Region size 2 Mbytes
#define NVIC_MPU_ATTR_SIZE_4M 0x0000002A // Region size 4 Mbytes
#define NVIC_MPU_ATTR_SIZE_8M 0x0000002C // Region size 8 Mbytes
#define NVIC_MPU_ATTR_SIZE_16M 0x0000002E // Region size 16 Mbytes
#define NVIC_MPU_ATTR_SIZE_32M 0x00000030 // Region size 32 Mbytes
#define NVIC_MPU_ATTR_SIZE_64M 0x00000032 // Region size 64 Mbytes
#define NVIC_MPU_ATTR_SIZE_128M 0x00000034 // Region size 128 Mbytes
#define NVIC_MPU_ATTR_SIZE_256M 0x00000036 // Region size 256 Mbytes
#define NVIC_MPU_ATTR_SIZE_512M 0x00000038 // Region size 512 Mbytes
#define NVIC_MPU_ATTR_SIZE_1G 0x0000003A // Region size 1 Gbytes
#define NVIC_MPU_ATTR_SIZE_2G 0x0000003C // Region size 2 Gbytes
#define NVIC_MPU_ATTR_SIZE_4G 0x0000003E // Region size 4 Gbytes
#define NVIC_MPU_ATTR_ENABLE 0x00000001 // Region enable
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_CTRL register.
//
//*****************************************************************************
#define NVIC_DBG_CTRL_DBGKEY_M 0xFFFF0000 // Debug key mask
#define NVIC_DBG_CTRL_DBGKEY 0xA05F0000 // Debug key
#define NVIC_DBG_CTRL_S_RESET_ST \
0x02000000 // Core has reset since last read
#define NVIC_DBG_CTRL_S_RETIRE_ST \
0x01000000 // Core has executed insruction
// since last read
#define NVIC_DBG_CTRL_S_LOCKUP 0x00080000 // Core is locked up
#define NVIC_DBG_CTRL_S_SLEEP 0x00040000 // Core is sleeping
#define NVIC_DBG_CTRL_S_HALT 0x00020000 // Core status on halt
#define NVIC_DBG_CTRL_S_REGRDY 0x00010000 // Register read/write available
#define NVIC_DBG_CTRL_C_SNAPSTALL \
0x00000020 // Breaks a stalled load/store
#define NVIC_DBG_CTRL_C_MASKINT 0x00000008 // Mask interrupts when stepping
#define NVIC_DBG_CTRL_C_STEP 0x00000004 // Step the core
#define NVIC_DBG_CTRL_C_HALT 0x00000002 // Halt the core
#define NVIC_DBG_CTRL_C_DEBUGEN 0x00000001 // Enable debug
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_XFER register.
//
//*****************************************************************************
#define NVIC_DBG_XFER_REG_WNR 0x00010000 // Write or not read
#define NVIC_DBG_XFER_REG_SEL_M 0x0000001F // Register
#define NVIC_DBG_XFER_REG_R0 0x00000000 // Register R0
#define NVIC_DBG_XFER_REG_R1 0x00000001 // Register R1
#define NVIC_DBG_XFER_REG_R2 0x00000002 // Register R2
#define NVIC_DBG_XFER_REG_R3 0x00000003 // Register R3
#define NVIC_DBG_XFER_REG_R4 0x00000004 // Register R4
#define NVIC_DBG_XFER_REG_R5 0x00000005 // Register R5
#define NVIC_DBG_XFER_REG_R6 0x00000006 // Register R6
#define NVIC_DBG_XFER_REG_R7 0x00000007 // Register R7
#define NVIC_DBG_XFER_REG_R8 0x00000008 // Register R8
#define NVIC_DBG_XFER_REG_R9 0x00000009 // Register R9
#define NVIC_DBG_XFER_REG_R10 0x0000000A // Register R10
#define NVIC_DBG_XFER_REG_R11 0x0000000B // Register R11
#define NVIC_DBG_XFER_REG_R12 0x0000000C // Register R12
#define NVIC_DBG_XFER_REG_R13 0x0000000D // Register R13
#define NVIC_DBG_XFER_REG_R14 0x0000000E // Register R14
#define NVIC_DBG_XFER_REG_R15 0x0000000F // Register R15
#define NVIC_DBG_XFER_REG_FLAGS 0x00000010 // xPSR/Flags register
#define NVIC_DBG_XFER_REG_MSP 0x00000011 // Main SP
#define NVIC_DBG_XFER_REG_PSP 0x00000012 // Process SP
#define NVIC_DBG_XFER_REG_DSP 0x00000013 // Deep SP
#define NVIC_DBG_XFER_REG_CFBP 0x00000014 // Control/Fault/BasePri/PriMask
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_DATA register.
//
//*****************************************************************************
#define NVIC_DBG_DATA_M 0xFFFFFFFF // Data temporary cache
#define NVIC_DBG_DATA_S 0
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_DBG_INT register.
//
//*****************************************************************************
#define NVIC_DBG_INT_HARDERR 0x00000400 // Debug trap on hard fault
#define NVIC_DBG_INT_INTERR 0x00000200 // Debug trap on interrupt errors
#define NVIC_DBG_INT_BUSERR 0x00000100 // Debug trap on bus error
#define NVIC_DBG_INT_STATERR 0x00000080 // Debug trap on usage fault state
#define NVIC_DBG_INT_CHKERR 0x00000040 // Debug trap on usage fault check
#define NVIC_DBG_INT_NOCPERR 0x00000020 // Debug trap on coprocessor error
#define NVIC_DBG_INT_MMERR 0x00000010 // Debug trap on mem manage fault
#define NVIC_DBG_INT_RESET 0x00000008 // Core reset status
#define NVIC_DBG_INT_RSTPENDCLR 0x00000004 // Clear pending core reset
#define NVIC_DBG_INT_RSTPENDING 0x00000002 // Core reset is pending
#define NVIC_DBG_INT_RSTVCATCH 0x00000001 // Reset vector catch
//*****************************************************************************
//
// The following are defines for the bit fields in the NVIC_SW_TRIG register.
//
//*****************************************************************************
#define NVIC_SW_TRIG_INTID_M 0x000003FF // Interrupt to trigger
#define NVIC_SW_TRIG_INTID_S 0
#endif // __HW_NVIC_H__