f51bce3fed
We currently only support building with CCS and SCons is not using.
bsp/rm48x50/HALCoGen/HALCoGen.{hcg,dil} is the HALCoGen project file.
You may need to regenerate the source file as you like, providing that:
1, IRQ is in Dispatch Mode and the table entry is IRQ_Handler. The
channel 5 in enabled and connected to IRQ.
2, RTI driver is enabled and compare3 source is selected to counter1
and the compare3 will generate tick in the period of 10ms. This
value is coresponding with RT_TICK_PER_SECOND in rtconfig.h.
In CCS, you need to create a new CCS project and create link folders
pointing at bsp/rm48x50, libcpu/arm/rm48x50 and src/, include/. Remember
to add the include path to the Build Properties.
126 lines
4.4 KiB
C
126 lines
4.4 KiB
C
/**
|
|
* \file emac.h
|
|
*
|
|
* \brief EMAC APIs and macros.
|
|
*
|
|
* This file contains the driver API prototypes and macro definitions.
|
|
*/
|
|
|
|
/* (c) Texas Instruments 2009-2013, All rights reserved. */
|
|
|
|
#ifndef __EMAC_H__
|
|
#define __EMAC_H__
|
|
|
|
#include "sys_common.h"
|
|
#include "hw_emac.h"
|
|
#ifdef __cplusplus
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*****************************************************************************/
|
|
/*
|
|
** Macros which can be used as speed parameter to the API EMACRMIISpeedSet
|
|
*/
|
|
#define EMAC_RMIISPEED_10MBPS (0x00000000U)
|
|
#define EMAC_RMIISPEED_100MBPS (0x00008000U)
|
|
|
|
/*
|
|
** Macros which can be used as duplexMode parameter to the API
|
|
** EMACDuplexSet
|
|
*/
|
|
#define EMAC_DUPLEX_FULL (0x00000001U)
|
|
#define EMAC_DUPLEX_HALF (0x00000000U)
|
|
|
|
/*
|
|
** Macros which can be used as matchFilt parameters to the API
|
|
** EMACMACAddrSet
|
|
*/
|
|
/* Address not used to match/filter incoming packets */
|
|
#define EMAC_MACADDR_NO_MATCH_NO_FILTER (0x00000000U)
|
|
|
|
/* Address will be used to filter incoming packets */
|
|
#define EMAC_MACADDR_FILTER (0x00100000U)
|
|
|
|
/* Address will be used to match incoming packets */
|
|
#define EMAC_MACADDR_MATCH (0x00180000U)
|
|
|
|
/*
|
|
** Macros which can be passed as eoiFlag to EMACRxIntAckToClear API
|
|
*/
|
|
#define EMAC_INT_CORE0_RX (0x1U)
|
|
#define EMAC_INT_CORE1_RX (0x5U)
|
|
#define EMAC_INT_CORE2_RX (0x9U)
|
|
|
|
/*
|
|
** Macros which can be passed as eoiFlag to EMACTxIntAckToClear API
|
|
*/
|
|
#define EMAC_INT_CORE0_TX (0x2U)
|
|
#define EMAC_INT_CORE1_TX (0x6U)
|
|
#define EMAC_INT_CORE2_TX (0xAU)
|
|
|
|
/*****************************************************************************/
|
|
/**
|
|
* @defgroup EMACMDIO EMAC/MDIO
|
|
* @brief Ethernet Media Access Controller/Management Data Input/Output.
|
|
*
|
|
* The EMAC controls the flow of packet data from the system to the PHY. The MDIO module controls PHY
|
|
* configuration and status monitoring.
|
|
*
|
|
* Both the EMAC and the MDIO modules interface to the system core through a custom interface that
|
|
* allows efficient data transmission and reception. This custom interface is referred to as the EMAC control
|
|
* module and is considered integral to the EMAC/MDIO peripheral
|
|
*
|
|
* Related Files
|
|
* - emac.h
|
|
* - emac.c
|
|
* - hw_emac.h
|
|
* - hw_emac_ctrl.h
|
|
* - hw_mdio.h
|
|
* - hw_reg_access.h
|
|
* - mdio.h
|
|
* - mdio.c
|
|
* @addtogroup EMACMDIO
|
|
* @{
|
|
*/
|
|
/*
|
|
** Prototypes for the APIs
|
|
*/
|
|
extern void EMACTxIntPulseEnable(uint32 emacBase, uint32 emacCtrlBase,
|
|
uint32 ctrlCore, uint32 channel);
|
|
extern void EMACTxIntPulseDisable(uint32 emacBase, uint32 emacCtrlBase,
|
|
uint32 ctrlCore, uint32 channel);
|
|
extern void EMACRxIntPulseEnable(uint32 emacBase, uint32 emacCtrlBase,
|
|
uint32 ctrlCore, uint32 channel);
|
|
extern void EMACRxIntPulseDisable(uint32 emacBase, uint32 emacCtrlBase,
|
|
uint32 ctrlCore, uint32 channel);
|
|
extern void EMACRMIISpeedSet(uint32 emacBase, uint32 speed);
|
|
extern void EMACDuplexSet(uint32 emacBase, uint32 duplexMode);
|
|
extern void EMACTxEnable(uint32 emacBase);
|
|
extern void EMACRxEnable(uint32 emacBase);
|
|
extern void EMACTxHdrDescPtrWrite(uint32 emacBase, uint32 descHdr,
|
|
uint32 channel);
|
|
extern void EMACRxHdrDescPtrWrite(uint32 emacBase, uint32 descHdr,
|
|
uint32 channel);
|
|
extern void EMACInit(uint32 emacCtrlBase, uint32 emacBase);
|
|
extern void EMACMACSrcAddrSet(uint32 emacBase, uint8 * macAddr);
|
|
extern void EMACMACAddrSet(uint32 emacBase, uint32 channel,
|
|
uint8 * macAddr, uint32 matchFilt);
|
|
extern void EMACMIIEnable(uint32 emacBase);
|
|
extern void EMACRxUnicastSet(uint32 emacBase, uint32 channel);
|
|
extern void EMACCoreIntAck(uint32 emacBase, uint32 eoiFlag);
|
|
extern void EMACTxCPWrite(uint32 emacBase, uint32 channel,
|
|
uint32 comPtr);
|
|
extern void EMACRxCPWrite(uint32 emacBase, uint32 channel,
|
|
uint32 comPtr);
|
|
extern void EMACRxBroadCastEnable(uint32 emacBase, uint32 channel);
|
|
extern void EMACNumFreeBufSet(uint32 emacBase, uint32 channel,
|
|
uint32 nBuf);
|
|
extern uint32 EMACIntVectorGet(uint32 emacBase);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
/**@}*/
|
|
#endif /* __EMAC_H__ */
|