1303 lines
46 KiB
C
1303 lines
46 KiB
C
//###########################################################################
|
|
//
|
|
// FILE: F2837xD_Ipc_Driver_Lite.c
|
|
//
|
|
// TITLE: F2837xD Inter-Processor Communication (IPC) Lite API Driver
|
|
// Functions.
|
|
//
|
|
// DESCRIPTION:
|
|
// API functions for inter-processor communications between
|
|
// CPU1 control system and CPU2 control system (Lite version). The IPC
|
|
// Lite functions only allow for basic functions such as data writes,
|
|
// reads, bit setting, and bit clearing. The Lite functions do not
|
|
// require the usage of the MSG RAM's or shared memories and can only
|
|
// be used with a single IPC interrupt channel. Commands can only
|
|
// be processed one at a time without queuing.
|
|
// The driver functions in this file are available only as
|
|
// sample functions for application development. Due to the generic
|
|
// nature of these functions and the cycle overhead inherent to a
|
|
// function call, the code is not intended to be used in cases where
|
|
// maximum efficiency is required in a system.
|
|
//
|
|
// NOTE: This source code is used by both CPUs. That is both CPU1 and CPU2
|
|
// cores use this code.
|
|
// The active debug CPU will be referred to as Local CPU and the other
|
|
// CPU will be referred to as Remote CPU.
|
|
// When using this source code in CPU1, the term "local"
|
|
// will mean CPU1 and the term "remote" CPU will be mean CPU2.
|
|
// When using this source code in CPU2, the term "local"
|
|
// will mean CPU2 and the term "remote" CPU will be mean CPU1.
|
|
//
|
|
// The abbreviations LtoR and RtoL within the function names mean
|
|
// Local to Remote and Remote to Local respectively.
|
|
//
|
|
//###########################################################################
|
|
// $TI Release: F2837xD Support Library v3.05.00.00 $
|
|
// $Release Date: Tue Jun 26 03:15:23 CDT 2018 $
|
|
// $Copyright:
|
|
// Copyright (C) 2013-2018 Texas Instruments Incorporated - http://www.ti.com/
|
|
//
|
|
// Redistribution and use in source and binary forms, with or without
|
|
// modification, are permitted provided that the following conditions
|
|
// are met:
|
|
//
|
|
// Redistributions of source code must retain the above copyright
|
|
// notice, this list of conditions and the following disclaimer.
|
|
//
|
|
// Redistributions in binary form must reproduce the above copyright
|
|
// notice, this list of conditions and the following disclaimer in the
|
|
// documentation and/or other materials provided with the
|
|
// distribution.
|
|
//
|
|
// Neither the name of Texas Instruments Incorporated nor the names of
|
|
// its contributors may be used to endorse or promote products derived
|
|
// from this software without specific prior written permission.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
// $
|
|
//###########################################################################
|
|
|
|
//*****************************************************************************
|
|
//! \addtogroup ipc_lite_api IPC-Lite API Drivers
|
|
//! @{
|
|
//*****************************************************************************
|
|
#include "F2837xD_device.h"
|
|
#include "F2837xD_Ipc_drivers.h"
|
|
|
|
//
|
|
// Function Prototypes
|
|
//
|
|
void DelayLoop (void);
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads single word data result of Local to Remote IPC command
|
|
//!
|
|
//! \param pvData is a pointer to the 16/32-bit variable where the result data
|
|
//! will be stored.
|
|
//! \param usLength designates 16- or 32-bit read.
|
|
//! \param ulStatusFlag indicates the Local to Remote CPU Flag number mask used
|
|
//! to report the status of the command sent back from the Remote CPU. If
|
|
//! a status flag was not used with the command call, set this parameter to 0.
|
|
//!
|
|
//! Allows the caller to read the 16/32-bit data result of non-blocking IPC
|
|
//! functions from the IPCREMOTEREPLY register if the status flag is cleared
|
|
//! indicating the IPC command was successfully interpreted. If the status flag
|
|
//! is not cleared, the command was not recognized, and the function will
|
|
//! return STATUS_FAIL. To determine what data is read from a call to this
|
|
//! function, see the descriptions of the non-blocking IPC functions.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//! The function returns \b STATUS_PASS or \b STATUS_FAIL.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRGetResult (void *pvData, uint16_t usLength, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// If Remote System never acknowledged Status Task, indicates command
|
|
// failure.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & ulStatusFlag)
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Read data.
|
|
//
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
*(uint16_t *)pvData = IpcRegs.IPCREMOTEREPLY;
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
*(uint32_t *)pvData = IpcRegs.IPCREMOTEREPLY;
|
|
}
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads either a 16- or 32-bit data word from the remote CPU System address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the remote address to read from
|
|
//! \param usLength designates 16- or 32-bit read (1 = 16-bit, 2 = 32-bit)
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the remote system.
|
|
//!
|
|
//! This function will allow the Local CPU System to read 16/32-bit data from
|
|
//! the Remote CPU System into the IPCREMOTEREPLY register. After calling this
|
|
//! function, a call to \e IPCLiteLtoRGetResult() will read the data value in
|
|
//! the IPCREMOTEREPLY register into a 16- or 32-bit variable in the local CPU
|
|
//! application.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRDataRead(uint32_t ulFlag, uint32_t ulAddress, uint16_t usLength,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Set up read command, address, and word length.
|
|
//
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_READ_16;
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_READ_32;
|
|
}
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking.
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the designated bits in a 16/32-bit data word at the remote CPU system
|
|
//! address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote address to write to.
|
|
//! \param ulMask specifies the 16/32-bit mask for bits which should be set at
|
|
//! remote ulAddress. For 16-bit mask, only the lower 16-bits of ulMask are
|
|
//! considered.
|
|
//! \param usLength specifies the length of the \e ulMask (1 = 16-bit, 2 =
|
|
//! 32-bit).
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Remote system.
|
|
//!
|
|
//! This function will allow the Local CPU system to set bits specified by the
|
|
//! \e usMask variable in a 16/32-bit word on the Remote CPU system. The data
|
|
//! word at /e ulAddress after the set bits command is then read into the
|
|
//! IPCREMOTEREPLY register. After calling this function, a call to \e
|
|
//! IPCLiteLtoRGetResult() will read the data value in the IPCREMOTEREPLY
|
|
//! register into a 16/32-bit variable in the Local CPU application.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRSetBits(uint32_t ulFlag, uint32_t ulAddress, uint32_t ulMask,
|
|
uint16_t usLength, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
//
|
|
// Set up 16-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_SET_BITS_16;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask & (0x0000FFFF);
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
//
|
|
// Set up 32-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_SET_BITS_32;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask;
|
|
}
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking.
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the designated bits in a 16/32-bit write-protected data word at
|
|
//! the Remote CPU system address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU write-protected address to write
|
|
//! to.
|
|
//! \param ulMask specifies the 16/32-bit mask for bits which should be set at
|
|
//! Remote CPU ulAddress.For 16-bit mask, only the lower 16-bits of ulMask are
|
|
//! considered.
|
|
//! \param usLength specifies the length of the \e ulMask (1 = 16-bit, 2 =
|
|
//! 32-bit).
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Master system.
|
|
//!
|
|
//! This function will allow the Local CPU system to set bits specified by the
|
|
//! \e usMask variable in a write-protected 16/32-bit word on the REmote CPU
|
|
//! system.
|
|
//! The data word at /e ulAddress after the set bits command is then read into
|
|
//! the IPCREMOTEREPLY register. After calling this function, a call to
|
|
//! \e IPCLiteLtoRGetResult() will read the data value in the IPCREMOTEREPLY
|
|
//! register into a 16/32-bit variable in the Local application.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRSetBits_Protected (uint32_t ulFlag, uint32_t ulAddress,
|
|
uint32_t ulMask, uint16_t usLength,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
//
|
|
// Set up 16-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_SET_BITS_16_PROTECTED;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask & (0x0000FFFF);
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
//
|
|
// Set up 32-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_SET_BITS_32_PROTECTED;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask;
|
|
}
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking.
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the designated bits in a 16/32-bit data word at the remote CPU system
|
|
//! address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU address to write to.
|
|
//! \param ulMask specifies the 16/32-bit mask for bits which should be set at
|
|
//! the remote CPU ulAddress. (For 16-bit mask, only the lower 16-bits of
|
|
//! ulMask are considered.
|
|
//! \param usLength specifies the length of the \e ulMask (1 = 16-bit, 2 =
|
|
//! 32-bit).
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Master system.
|
|
//!
|
|
//! This function will allow the Local CPU system to set bits specified by the
|
|
//! \e usMask variable in a 16/32-bit word on the Remote CPU system. The data
|
|
//! word at /e ulAddress after the set bits command is then read into the
|
|
//! IPCREMOTEREPLY register. After calling this function, a call to \e
|
|
//! IPCLiteLtoRGetResult() will read the data value in the IPCREMOTEREPLY
|
|
//! register into a 16/32-bit variable in the Local CPU application.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRClearBits(uint32_t ulFlag, uint32_t ulAddress, uint32_t ulMask,
|
|
uint16_t usLength, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
//
|
|
// Set up 16-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_CLEAR_BITS_16;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask & (0x0000FFFF);
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
//
|
|
// Set up 32-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_CLEAR_BITS_32;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask;
|
|
}
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking.
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the designated bits in a 16/32-bit write-protected data word at
|
|
//! Remote CPU system address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU write-protected address to write
|
|
//! to.
|
|
//! \param ulMask specifies the 16/32-bit mask for bits which should be cleared
|
|
//! at Remote CPU ulAddress.For 16-bit mask, only the lower 16-bits of ulMask
|
|
//! are considered.
|
|
//! \param usLength specifies the length of the \e ulMask (1 = 16-bit, 2 =
|
|
//! 32-bit).
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Master system.
|
|
//!
|
|
//! This function will allow the Local CPU system to clear bits specified by
|
|
//! the \e usMask variable in a write-protected 16/32-bit word on the Remote
|
|
//! CPU system.
|
|
//! The data word at /e ulAddress after the clear bits command is then read
|
|
//! into the IPCREMOTEREPLY register. After calling this function, a call to
|
|
//! \e IPCLiteLtoRGetResult() will read the data value in the IPCREMOTEREPLY
|
|
//! register into a 16/32-bit variable in the Local CPU application.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRClearBits_Protected (uint32_t ulFlag, uint32_t ulAddress,
|
|
uint32_t ulMask, uint16_t usLength,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
//
|
|
// Set up 16-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_CLEAR_BITS_16_PROTECTED;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask & (0x0000FFFF);
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
//
|
|
// Set up 32-bit set bits command, address, and mask.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_CLEAR_BITS_32_PROTECTED;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulMask;
|
|
}
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking.
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a 16/32-bit data word to Remote CPU System address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU address to write to
|
|
//! \param ulData specifies the 16/32-bit word which will be written.
|
|
//! For 16-bit words, only the lower 16-bits of ulData will be considered by
|
|
//! the master system.
|
|
//! \param usLength is the length of the word to write (0 = 16-bits, 1 =
|
|
//! 32-bits)
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Remote CPU system.
|
|
//!
|
|
//! This function will allow the Local CPU System to write a 16/32-bit word
|
|
//! via the \e ulData variable to an address on the Remote CPU System.
|
|
//! The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRDataWrite(uint32_t ulFlag, uint32_t ulAddress, uint32_t ulData,
|
|
uint16_t usLength, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Set up data write command, address, and data. For 16-bit write,
|
|
// Master system will look at lower 16-bits only.
|
|
//
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_WRITE_16;
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_WRITE_32;
|
|
}
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulData;
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a 16/32-bit data word to a protected Remote CPU System address
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU address to write to
|
|
//! \param ulData specifies the 16/32-bit word which will be written.
|
|
//! For 16-bit words, only the lower 16-bits of ulData will be considered by
|
|
//! the master system.
|
|
//! \param usLength is the length of the word to write (0 = 16-bits, 1 =
|
|
//! 32-bits)
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Master system.
|
|
//!
|
|
//! This function will allow the Local CPU System to write a 16/32-bit word
|
|
//! via the \e ulData variable to a write-protected address on the Remote CPU
|
|
//! System. The \e usLength parameter accepts the following values: \b
|
|
//! IPC_LENGTH_16_BITS or \b IPC_LENGTH_32_BITS. The \e ulStatusFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and \b
|
|
//! NO_FLAG. The function returns \b STATUS_PASS if the command is successful
|
|
//! or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRDataWrite_Protected(uint32_t ulFlag, uint32_t ulAddress,
|
|
uint32_t ulData, uint16_t usLength,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Local to Remote request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Set up data write command, address, and data. For 16-bit write, Master
|
|
// system will look at lower 16-bits only.
|
|
//
|
|
if (usLength == IPC_LENGTH_16_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_WRITE_16_PROTECTED;
|
|
}
|
|
else if (usLength == IPC_LENGTH_32_BITS)
|
|
{
|
|
IpcRegs.IPCSENDCOM = IPC_DATA_WRITE_32_PROTECTED;
|
|
}
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulData;
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Calls a Remote CPU function with 1 optional parameter and an optional
|
|
//! return value.
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulAddress specifies the Remote CPU function address
|
|
//! \param ulParam specifies the 32-bit optional parameter value
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Local CPU system to call a function on the
|
|
//! Remote CPU. The \e ulParam variable is a single optional 32-bit parameter
|
|
//! to pass to the function. The \e ulFlag parameter accepts any one of the
|
|
//! flag values \b IPC_FLAG1 - \b IPC_FLAG32. The \e ulStatusFlag parameter
|
|
//! accepts any other one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32
|
|
//! and \b NO_FLAG. The function returns \b STATUS_PASS if the command is
|
|
//! successful or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteLtoRFunctionCall(uint32_t ulFlag, uint32_t ulAddress, uint32_t ulParam,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t returnStatus;
|
|
|
|
//
|
|
// Return false if IPC Remote to Local request or status flags are not
|
|
// available.
|
|
//
|
|
if (IpcRegs.IPCFLG.all & (ulFlag | ulStatusFlag))
|
|
{
|
|
returnStatus = STATUS_FAIL;
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Set up function call command, address, and parameter.
|
|
//
|
|
IpcRegs.IPCSENDCOM = IPC_FUNC_CALL;
|
|
IpcRegs.IPCSENDADDR = ulAddress;
|
|
IpcRegs.IPCSENDDATA = ulParam;
|
|
|
|
//
|
|
// Force IPC event on selected request task and enable status-checking
|
|
//
|
|
IpcRegs.IPCSET.all |= (ulFlag | ulStatusFlag);
|
|
|
|
returnStatus = STATUS_PASS;
|
|
}
|
|
|
|
return returnStatus;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Slave Requests Master R/W/Exe Access to Shared SARAM.
|
|
//!
|
|
//! \param ulFlag specifies Local to Remote IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulMask specifies the 32-bit mask for the GSxMEMSEL RAM control
|
|
//! register to indicate which GSx SARAM blocks the Slave is requesting master
|
|
//! access to.
|
|
//! \param ulMaster specifies whether CPU1 or CPU2 should be the master of the
|
|
//! GSx RAM.
|
|
//! \param ulStatusFlag indicates the Local to Remote Flag number mask used to
|
|
//! report the status of the command sent back from the Master system.
|
|
//!
|
|
//! This function will allow the slave CPU System to request slave or master
|
|
//! mastership of any of the GSx Shared SARAM blocks.
|
|
//! The \e ulMaster parameter accepts the following values:
|
|
//! \b IPC_GSX_CPU2_MASTER or \b IPC_GSX_CPU1_MASTER. The \e ulStatusFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32
|
|
//! and \b NO_FLAG. The function returns \b STATUS_PASS if the command is
|
|
//! successful or \b STATUS_FAIL if the request or status flags are unavailable.
|
|
//! \note This function calls the \e IPCLiteLtoRSetBits_Protected() or the
|
|
//! \e IPCLiteLtoRClearBits_Protected function, and therefore in order to
|
|
//! process this function, the above 2 functions should be ready to be called
|
|
//! on the master system to process this command.
|
|
//!
|
|
//! \return status of command (0=success, 1=error)
|
|
//
|
|
//*****************************************************************************
|
|
uint16_t
|
|
IPCLiteReqMemAccess (uint32_t ulFlag, uint32_t ulMask, uint16_t ulMaster,
|
|
uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t status;
|
|
uint32_t GSxMSEL_REGaddress = (uint32_t)(&MemCfgRegs.GSxMSEL.all);
|
|
if (ulMaster == IPC_GSX_CPU2_MASTER)
|
|
{
|
|
status =
|
|
IPCLiteLtoRSetBits_Protected (ulFlag, GSxMSEL_REGaddress, ulMask,
|
|
IPC_LENGTH_32_BITS,
|
|
ulStatusFlag);
|
|
}
|
|
else if (ulMaster == IPC_GSX_CPU1_MASTER)
|
|
{
|
|
status =
|
|
IPCLiteLtoRClearBits_Protected (ulFlag, GSxMSEL_REGaddress, ulMask,
|
|
IPC_LENGTH_32_BITS,
|
|
ulStatusFlag);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Reads either a 16- or 32-bit data word from the Local CPU system address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to read 16/32-bit data from
|
|
//! the Local CPU system. The \e ulFlag parameter accepts any one of the
|
|
//! flag values \b IPC_FLAG1 - \b IPC_FLAG32, and the \e ulStatusFlag parameter
|
|
//! accepts any other one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and
|
|
//! \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLDataRead(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
|
|
uint32_t* pulRAddress;
|
|
uint16_t* pusRAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command and data length are correct for this function:
|
|
// Then read from requested address and write 16/32-bit data
|
|
// to IPCLOCALREPLY. Acknowledge the status flag
|
|
// and the task flag.
|
|
//
|
|
if (IpcRegs.IPCRECVCOM == IPC_DATA_READ_16)
|
|
{
|
|
//
|
|
// Perform 16-bit read.
|
|
//
|
|
pusRAddress = (uint16_t *)IpcRegs.IPCRECVADDR;
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)(*pusRAddress);
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_DATA_READ_32)
|
|
{
|
|
pulRAddress = (uint32_t *)IpcRegs.IPCRECVADDR;
|
|
IpcRegs.IPCLOCALREPLY = *pulRAddress;
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
//(Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the designated bits in a 16/32-bit data word at the Local CPU system
|
|
//! address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to set bits specified by a
|
|
//! mask variable in a 16/32-bit word on the Local CPU system, and then read
|
|
//! back the word into the IPCLOCALREPLY register. The \e ulFlag parameter
|
|
//! accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32, and the
|
|
//! \e ulStatusFlag parameter accepts any other one of the flag values \b
|
|
//! IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLSetBits(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
|
|
uint16_t* pusAddress;
|
|
uint32_t* pulAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then set the mask bits at the requested address
|
|
// and write back the 16/32-bit data to IPCLOCALREPLY.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
if (IpcRegs.IPCRECVCOM == IPC_SET_BITS_16)
|
|
{
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;;
|
|
*pusAddress |= (uint16_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_SET_BITS_32)
|
|
{
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;;
|
|
*pulAddress |= (uint32_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = *pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
// (Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the designated bits in a 16-bit data word at the Local CPU system
|
|
//! write-protected address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to set bits specified by a
|
|
//! mask variable in a write-protected 16/32-bit word on the Local CPU system,
|
|
//! and then read back the word into the IPCLOCALREPLY register. The \e ulFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32,
|
|
//! and the \e ulStatusFlag parameter accepts any other one of the flag values
|
|
//! \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLSetBits_Protected (uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
|
|
uint16_t* pusAddress;
|
|
uint32_t* pulAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then enable write access with EALLOW and
|
|
// set the mask bits at the requested address.
|
|
// Write back the 16-bit data to IPCLOCALREPLY.
|
|
// Restore write-protection with EDIS.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
|
|
EALLOW;
|
|
|
|
if (IpcRegs.IPCRECVCOM == IPC_SET_BITS_16_PROTECTED)
|
|
{
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;
|
|
*pusAddress |= (uint16_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_SET_BITS_32_PROTECTED)
|
|
{
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;
|
|
*pulAddress |= (uint32_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = *pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
//(Indicates to the Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
|
|
EDIS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the designated bits in a 16/32-bit data word at Local CPU system
|
|
//! address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to clear bits specified by a
|
|
//! mask variable in a 16/32-bit word on the Local CPU system, and then read
|
|
//! back the word into the IPCLOCALREPLY register. The \e ulFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32,
|
|
//! and the \e ulStatusFlag parameter accepts any other one of the flag values
|
|
//! \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLClearBits(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t* pusAddress;
|
|
uint32_t* pulAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then clear the mask bits at the requested address
|
|
// and write back the 16/32-bit data to IPCLOCALREPLY.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
if (IpcRegs.IPCRECVCOM == IPC_CLEAR_BITS_16)
|
|
{
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;;
|
|
*pusAddress &= ~((uint16_t)IpcRegs.IPCRECVDATA);
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_CLEAR_BITS_32)
|
|
{
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;
|
|
*pulAddress &= ~((uint32_t)IpcRegs.IPCRECVDATA);
|
|
IpcRegs.IPCLOCALREPLY = *pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
// (Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the designated bits in a 16/32-bit data word at the Local CPU system
|
|
//! write-protected address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to clear bits specified by a
|
|
//! mask variable in a 16/32-bit word on the Local CPU system, and then read
|
|
//! back the word into the IPCLOCALREPLY register. The \e ulFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32,
|
|
//! and the \e ulStatusFlag parameter accepts any other one of the flag values
|
|
//! \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLClearBits_Protected (uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
uint16_t* pusAddress;
|
|
uint32_t* pulAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then enable write access with EALLOW and
|
|
// clear the mask bits at the requested address.
|
|
// Write back the 16/32-bit data to IPCLOCALREPLY.
|
|
// Restore the status of the EALLOW register.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
EALLOW;
|
|
|
|
if (IpcRegs.IPCRECVCOM == IPC_CLEAR_BITS_16_PROTECTED)
|
|
{
|
|
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;;
|
|
*pusAddress &= ~((uint16_t)IpcRegs.IPCRECVDATA);
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_CLEAR_BITS_32_PROTECTED)
|
|
{
|
|
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;;
|
|
*pulAddress &= ~((uint32_t)IpcRegs.IPCRECVDATA);
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
// (Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
|
|
EDIS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a 16/32-bit data word to Local CPU system address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to write a 16/32-bit word
|
|
//! to an address on the Local CPU system. The \e ulFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32,
|
|
//! and the \e ulStatusFlag parameter accepts any other one of the flag values
|
|
//! \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLDataWrite(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
uint32_t* pulAddress;
|
|
uint16_t* pusAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then write the 16/32-bit data to the requested address
|
|
// and write back the 16/32-bit data to IPCLOCALREPLY.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
if (IpcRegs.IPCRECVCOM == IPC_DATA_WRITE_16)
|
|
{
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;;
|
|
*pusAddress = (uint16_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_DATA_WRITE_32)
|
|
{
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;;
|
|
*pulAddress = IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = *pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
// (Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Writes a 16/32-bit data word to a write-protected Local CPU system address
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to write a 16/32-bit word
|
|
//! to an address on the Local CPU system. The \e ulFlag
|
|
//! parameter accepts any one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32,
|
|
//! and the \e ulStatusFlag parameter accepts any other one of the flag values
|
|
//! \b IPC_FLAG1 - \b IPC_FLAG32 and \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLDataWrite_Protected(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
uint32_t* pulAddress;
|
|
uint16_t* pusAddress;
|
|
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then enable write access with EALLOW and
|
|
// write the 16/32-bit data to the requested address
|
|
// and write back the 16/32-bit data to IPCLOCALREPLY.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
EALLOW;
|
|
|
|
if (IpcRegs.IPCRECVCOM == IPC_DATA_WRITE_16_PROTECTED)
|
|
{
|
|
pusAddress = (uint16_t *)IpcRegs.IPCRECVADDR;;
|
|
*pusAddress = (uint16_t)IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = (uint32_t)*pusAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
else if (IpcRegs.IPCRECVCOM == IPC_DATA_WRITE_32_PROTECTED)
|
|
{
|
|
pulAddress = (uint32_t *)IpcRegs.IPCRECVADDR;
|
|
*pulAddress = IpcRegs.IPCRECVDATA;
|
|
IpcRegs.IPCLOCALREPLY = *pulAddress;
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
// (Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
|
|
//
|
|
// Restore write-protection status.
|
|
//
|
|
EDIS;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Calls a Local CPU function with a single optional parameter and return
|
|
//! value.
|
|
//!
|
|
//! \param ulFlag specifies Remote to Local IPC Flag number mask used to
|
|
//! indicate a command is being sent.
|
|
//! \param ulStatusFlag indicates the Remote to Local Flag number mask used to
|
|
//! report the status of the command sent back from the control system.
|
|
//!
|
|
//! This function will allow the Remote CPU system to call a Local CPU function
|
|
//! with a single optional parameter and places an optional return value in the
|
|
//! IPCLOCALREPLY register. The \e ulFlag parameter accepts any one of the flag
|
|
//! values \b IPC_FLAG1 - \b IPC_FLAG32, and the \e ulStatusFlag parameter
|
|
//! accepts any other one of the flag values \b IPC_FLAG1 - \b IPC_FLAG32 and
|
|
//! \b NO_FLAG.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
IPCLiteRtoLFunctionCall(uint32_t ulFlag, uint32_t ulStatusFlag)
|
|
{
|
|
//
|
|
// Wait until IPC Remote to Local request task is flagged
|
|
//
|
|
while (!(IpcRegs.IPCSTS.all & ulFlag))
|
|
{
|
|
}
|
|
|
|
//
|
|
// If the command is correct for this function:
|
|
// Then call function at requested address
|
|
// and if there is a return value, insert into
|
|
// IPCLOCALREPLY register.
|
|
// Acknowledge the status flag and the task flag.
|
|
//
|
|
if (IpcRegs.IPCRECVCOM == IPC_FUNC_CALL)
|
|
{
|
|
tfIpcFuncCall func_call = (tfIpcFuncCall)IpcRegs.IPCRECVADDR;
|
|
IpcRegs.IPCLOCALREPLY = func_call(IpcRegs.IPCRECVDATA);
|
|
|
|
IpcRegs.IPCACK.all |= (ulStatusFlag | ulFlag);
|
|
}
|
|
|
|
//
|
|
// Otherwise, only acknowledge the task flag.
|
|
//(Indicates to Remote CPU there was an error)
|
|
//
|
|
else
|
|
{
|
|
IpcRegs.IPCACK.all |= (ulFlag);
|
|
}
|
|
}
|
|
|
|
void DelayLoop (void)
|
|
{
|
|
__asm(" nop");
|
|
__asm(" nop");
|
|
__asm(" nop");
|
|
__asm(" nop");
|
|
__asm(" nop");
|
|
}
|
|
|
|
//*****************************************************************************
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//*****************************************************************************
|
|
|
|
|