rt-thread/bsp/apollo2/README.md

50 lines
1.9 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

Apollo2 MCU是基于Ambiq Micro的Apollo MCU产品系列的第二代控制器。
Ambiq使用专利亚阈值功率优化技术Subthreshold Power Optimized Technology SPOT平台来实现惊人的功耗降低其功耗通常比性能相近的其它MCU产品降低5至10倍。
Apollo2 MCU采用32位ARM Cortex-M4F微控制器集成了高达1 MB的闪存和256 KB的RAM以适应无线电和传感器开销同时仍留有足够的应用代码空间。该微控制器还包括串行主机和UART端口用于与无线电和传感器通信包括加速度计陀螺仪和磁力计。
```
Features
Ultra-low supply current
10 μA/MHz executing from flash at 3.3 V
10 μA/MHz executing from RAM at 3.3 V
High-performance ARM Cortex-M4 Processor
Up to 48 MHz clock frequency
Floating point unit
Memory protection unit
Wake-up interrupt controller with 32 interrupts
Ultra-low power memory:
Up to 1 MB of flash memory for code/data
Up to 256 KB of low leakage RAM for code/data
16kB 1 or 2-way Associative Cache
Ultra-low power interface for off-chip sensors:
14 bit, 15-channel, up to 1.2 MS/s ADC
Voltage Comparator
Temperature sensor with +/-2C accuracy
Flexible serial peripherals:
6x I2C/SPI master for communication with sensors,?radios, and other peripherals
1x I2C/SPI slave for host communications
2x UART for communication with peripherals and?legacy devices
PDM for mono and stereo audio microphone
Rich set of clock sources:
32.768 kHz XTAL oscillator
Low frequency RC oscillator 1.024 kHz
High frequency RC oscillator 48 MHz
RTC based on Ambiqs AM08X5/18X5 families
Wide operating range: 1.8-3.6 V, 40 to 85°C
Compact package options:
2.5 x 2.5 mm 49-pin CSP with 34 GPIO
4.5 x 4.5 mm 64-pin BGA with 50 GPIO
Board info
Apollo2 Evaluation Boardhttp://ambiqmicro.com/apollo-ultra-low-power-mcu/apollo2-mcu-20170703/
```