916 lines
28 KiB
C
916 lines
28 KiB
C
//*****************************************************************************
|
|
//
|
|
// flash.c - Driver for programming the on-chip flash.
|
|
//
|
|
// Copyright (c) 2005-2009 Luminary Micro, Inc. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Luminary Micro, Inc. (LMI) is supplying this software for use solely and
|
|
// exclusively on LMI's microcontroller products.
|
|
//
|
|
// The software is owned by LMI and/or its suppliers, and is protected under
|
|
// applicable copyright laws. All rights are reserved. You may not combine
|
|
// this software with "viral" open-source software in order to form a larger
|
|
// program. Any use in violation of the foregoing restrictions may subject
|
|
// the user to criminal sanctions under applicable laws, as well as to civil
|
|
// liability for the breach of the terms and conditions of this license.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS". NO WARRANTIES, WHETHER EXPRESS, IMPLIED
|
|
// OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF
|
|
// MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE.
|
|
// LMI SHALL NOT, IN ANY CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR
|
|
// CONSEQUENTIAL DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 4694 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup flash_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include "inc/hw_flash.h"
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_sysctl.h"
|
|
#include "inc/hw_types.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/flash.h"
|
|
#include "driverlib/interrupt.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// An array that maps the specified memory bank to the appropriate Flash
|
|
// Memory Protection Program Enable (FMPPE) register.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulFMPPERegs[] =
|
|
{
|
|
FLASH_FMPPE,
|
|
FLASH_FMPPE1,
|
|
FLASH_FMPPE2,
|
|
FLASH_FMPPE3
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// An array that maps the specified memory bank to the appropriate Flash
|
|
// Memory Protection Read Enable (FMPRE) register.
|
|
//
|
|
//*****************************************************************************
|
|
static const unsigned long g_pulFMPRERegs[] =
|
|
{
|
|
FLASH_FMPRE,
|
|
FLASH_FMPRE1,
|
|
FLASH_FMPRE2,
|
|
FLASH_FMPRE3
|
|
};
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the number of processor clocks per micro-second.
|
|
//!
|
|
//! This function returns the number of clocks per micro-second, as presently
|
|
//! known by the flash controller.
|
|
//!
|
|
//! \return Returns the number of processor clocks per micro-second.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
FlashUsecGet(void)
|
|
{
|
|
//
|
|
// Return the number of clocks per micro-second.
|
|
//
|
|
return(HWREG(FLASH_USECRL) + 1);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the number of processor clocks per micro-second.
|
|
//!
|
|
//! \param ulClocks is the number of processor clocks per micro-second.
|
|
//!
|
|
//! This function is used to tell the flash controller the number of processor
|
|
//! clocks per micro-second. This value must be programmed correctly or the
|
|
//! flash most likely will not program correctly; it has no affect on reading
|
|
//! flash.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashUsecSet(unsigned long ulClocks)
|
|
{
|
|
//
|
|
// Set the number of clocks per micro-second.
|
|
//
|
|
HWREG(FLASH_USECRL) = ulClocks - 1;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Erases a block of flash.
|
|
//!
|
|
//! \param ulAddress is the start address of the flash block to be erased.
|
|
//!
|
|
//! This function will erase a 1 kB block of the on-chip flash. After erasing,
|
|
//! the block will be filled with 0xFF bytes. Read-only and execute-only
|
|
//! blocks cannot be erased.
|
|
//!
|
|
//! This function will not return until the block has been erased.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if an invalid block address was
|
|
//! specified or the block is write-protected.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashErase(unsigned long ulAddress)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(!(ulAddress & (FLASH_ERASE_SIZE - 1)));
|
|
|
|
//
|
|
// Clear the flash access interrupt.
|
|
//
|
|
HWREG(FLASH_FCMISC) = FLASH_FCMISC_AMISC;
|
|
|
|
//
|
|
// Erase the block.
|
|
//
|
|
HWREG(FLASH_FMA) = ulAddress;
|
|
HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_ERASE;
|
|
|
|
//
|
|
// Wait until the block has been erased.
|
|
//
|
|
while(HWREG(FLASH_FMC) & FLASH_FMC_ERASE)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Return an error if an access violation occurred.
|
|
//
|
|
if(HWREG(FLASH_FCRIS) & FLASH_FCRIS_ARIS)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Programs flash.
|
|
//!
|
|
//! \param pulData is a pointer to the data to be programmed.
|
|
//! \param ulAddress is the starting address in flash to be programmed. Must
|
|
//! be a multiple of four.
|
|
//! \param ulCount is the number of bytes to be programmed. Must be a multiple
|
|
//! of four.
|
|
//!
|
|
//! This function will program a sequence of words into the on-chip flash.
|
|
//! Programming each location consists of the result of an AND operation
|
|
//! of the new data and the existing data; in other words bits that contain
|
|
//! 1 can remain 1 or be changed to 0, but bits that are 0 cannot be changed
|
|
//! to 1. Therefore, a word can be programmed multiple times as long as these
|
|
//! rules are followed; if a program operation attempts to change a 0 bit to
|
|
//! a 1 bit, that bit will not have its value changed.
|
|
//!
|
|
//! Since the flash is programmed one word at a time, the starting address and
|
|
//! byte count must both be multiples of four. It is up to the caller to
|
|
//! verify the programmed contents, if such verification is required.
|
|
//!
|
|
//! This function will not return until the data has been programmed.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if a programming error is encountered.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashProgram(unsigned long *pulData, unsigned long ulAddress,
|
|
unsigned long ulCount)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT(!(ulAddress & 3));
|
|
ASSERT(!(ulCount & 3));
|
|
|
|
//
|
|
// Clear the flash access interrupt.
|
|
//
|
|
HWREG(FLASH_FCMISC) = FLASH_FCMISC_AMISC;
|
|
|
|
//
|
|
// See if this device has a write buffer.
|
|
//
|
|
if(HWREG(SYSCTL_NVMSTAT) & SYSCTL_NVMSTAT_FWB)
|
|
{
|
|
//
|
|
// Loop over the words to be programmed.
|
|
//
|
|
while(ulCount)
|
|
{
|
|
//
|
|
// Set the address of this block of words.
|
|
//
|
|
HWREG(FLASH_FMA) = ulAddress & ~(0x7f);
|
|
|
|
//
|
|
// Loop over the words in this 32-word block.
|
|
//
|
|
while(((ulAddress & 0x7c) || (HWREG(FLASH_FWBVAL) == 0)) &&
|
|
(ulCount != 0))
|
|
{
|
|
//
|
|
// Write this word into the write buffer.
|
|
//
|
|
HWREG(FLASH_FWBN + (ulAddress & 0x7c)) = *pulData++;
|
|
ulAddress += 4;
|
|
ulCount -= 4;
|
|
}
|
|
|
|
//
|
|
// Program the contents of the write buffer into flash.
|
|
//
|
|
HWREG(FLASH_FMC2) = FLASH_FMC2_WRKEY | FLASH_FMC2_WRBUF;
|
|
|
|
//
|
|
// Wait until the write buffer has been programmed.
|
|
//
|
|
while(HWREG(FLASH_FMC2) & FLASH_FMC2_WRBUF)
|
|
{
|
|
}
|
|
}
|
|
}
|
|
else
|
|
{
|
|
//
|
|
// Loop over the words to be programmed.
|
|
//
|
|
while(ulCount)
|
|
{
|
|
//
|
|
// Program the next word.
|
|
//
|
|
HWREG(FLASH_FMA) = ulAddress;
|
|
HWREG(FLASH_FMD) = *pulData;
|
|
HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_WRITE;
|
|
|
|
//
|
|
// Wait until the word has been programmed.
|
|
//
|
|
while(HWREG(FLASH_FMC) & FLASH_FMC_WRITE)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Increment to the next word.
|
|
//
|
|
pulData++;
|
|
ulAddress += 4;
|
|
ulCount -= 4;
|
|
}
|
|
}
|
|
|
|
//
|
|
// Return an error if an access violation occurred.
|
|
//
|
|
if(HWREG(FLASH_FCRIS) & FLASH_FCRIS_ARIS)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the protection setting for a block of flash.
|
|
//!
|
|
//! \param ulAddress is the start address of the flash block to be queried.
|
|
//!
|
|
//! This function will get the current protection for the specified 2 kB block
|
|
//! of flash. Each block can be read/write, read-only, or execute-only.
|
|
//! Read/write blocks can be read, executed, erased, and programmed. Read-only
|
|
//! blocks can be read and executed. Execute-only blocks can only be executed;
|
|
//! processor and debugger data reads are not allowed.
|
|
//!
|
|
//! \return Returns the protection setting for this block. See
|
|
//! FlashProtectSet() for possible values.
|
|
//
|
|
//*****************************************************************************
|
|
tFlashProtection
|
|
FlashProtectGet(unsigned long ulAddress)
|
|
{
|
|
unsigned long ulFMPRE, ulFMPPE;
|
|
unsigned long ulBank;
|
|
|
|
//
|
|
// Check the argument.
|
|
//
|
|
ASSERT(!(ulAddress & (FLASH_PROTECT_SIZE - 1)));
|
|
|
|
//
|
|
// Calculate the Flash Bank from Base Address, and mask off the Bank
|
|
// from ulAddress for subsequent reference.
|
|
//
|
|
ulBank = (((ulAddress / FLASH_PROTECT_SIZE) / 32) % 4);
|
|
ulAddress &= ((FLASH_PROTECT_SIZE * 32) - 1);
|
|
|
|
//
|
|
// Read the appropriate flash protection registers for the specified
|
|
// flash bank.
|
|
//
|
|
ulFMPRE = HWREG(g_pulFMPRERegs[ulBank]);
|
|
ulFMPPE = HWREG(g_pulFMPPERegs[ulBank]);
|
|
|
|
//
|
|
// For Stellaris Sandstorm-class devices, revision C1 and C2, the upper
|
|
// bits of the FMPPE register are used for JTAG protect options, and are
|
|
// not available for the FLASH protection scheme. When Querying Block
|
|
// Protection, assume these bits are 1.
|
|
//
|
|
if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2))
|
|
{
|
|
ulFMPRE |= (FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30);
|
|
}
|
|
|
|
//
|
|
// Check the appropriate protection bits for the block of memory that
|
|
// is specified by the address.
|
|
//
|
|
switch((((ulFMPRE >> (ulAddress / FLASH_PROTECT_SIZE)) &
|
|
FLASH_FMP_BLOCK_0) << 1) |
|
|
((ulFMPPE >> (ulAddress / FLASH_PROTECT_SIZE)) & FLASH_FMP_BLOCK_0))
|
|
{
|
|
//
|
|
// This block is marked as execute only (that is, it can not be erased
|
|
// or programmed, and the only reads allowed are via the instruction
|
|
// fetch interface).
|
|
//
|
|
case 0:
|
|
case 1:
|
|
{
|
|
return(FlashExecuteOnly);
|
|
}
|
|
|
|
//
|
|
// This block is marked as read only (that is, it can not be erased or
|
|
// programmed).
|
|
//
|
|
case 2:
|
|
{
|
|
return(FlashReadOnly);
|
|
}
|
|
|
|
//
|
|
// This block is read/write; it can be read, erased, and programmed.
|
|
//
|
|
case 3:
|
|
default:
|
|
{
|
|
return(FlashReadWrite);
|
|
}
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the protection setting for a block of flash.
|
|
//!
|
|
//! \param ulAddress is the start address of the flash block to be protected.
|
|
//! \param eProtect is the protection to be applied to the block. Can be one
|
|
//! of \b FlashReadWrite, \b FlashReadOnly, or \b FlashExecuteOnly.
|
|
//!
|
|
//! This function will set the protection for the specified 2 kB block of
|
|
//! flash. Blocks which are read/write can be made read-only or execute-only.
|
|
//! Blocks which are read-only can be made execute-only. Blocks which are
|
|
//! execute-only cannot have their protection modified. Attempts to make the
|
|
//! block protection less stringent (that is, read-only to read/write) will
|
|
//! result in a failure (and be prevented by the hardware).
|
|
//!
|
|
//! Changes to the flash protection are maintained only until the next reset.
|
|
//! This allows the application to be executed in the desired flash protection
|
|
//! environment to check for inappropriate flash access (via the flash
|
|
//! interrupt). To make the flash protection permanent, use the
|
|
//! FlashProtectSave() function.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if an invalid address or an invalid
|
|
//! protection was specified.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashProtectSet(unsigned long ulAddress, tFlashProtection eProtect)
|
|
{
|
|
unsigned long ulProtectRE, ulProtectPE;
|
|
unsigned long ulBank;
|
|
|
|
//
|
|
// Check the argument.
|
|
//
|
|
ASSERT(!(ulAddress & (FLASH_PROTECT_SIZE - 1)));
|
|
ASSERT((eProtect == FlashReadWrite) || (eProtect == FlashReadOnly) ||
|
|
(eProtect == FlashExecuteOnly));
|
|
|
|
//
|
|
// Convert the address into a block number.
|
|
//
|
|
ulAddress /= FLASH_PROTECT_SIZE;
|
|
|
|
//
|
|
// ulAddress contains a "raw" block number. Derive the Flash Bank from
|
|
// the "raw" block number, and convert ulAddress to a "relative"
|
|
// block number.
|
|
//
|
|
ulBank = ((ulAddress / 32) % 4);
|
|
ulAddress %= 32;
|
|
|
|
//
|
|
// Get the current protection for the specified flash bank.
|
|
//
|
|
ulProtectRE = HWREG(g_pulFMPRERegs[ulBank]);
|
|
ulProtectPE = HWREG(g_pulFMPPERegs[ulBank]);
|
|
|
|
//
|
|
// For Stellaris Sandstorm-class devices, revision C1 and C2, the upper
|
|
// bits of the FMPPE register are used for JTAG protect options, and are
|
|
// not available for the FLASH protection scheme. When setting protection,
|
|
// check to see if block 30 or 31 and protection is FlashExecuteOnly. If
|
|
// so, return an error condition.
|
|
//
|
|
if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2))
|
|
{
|
|
if((ulAddress >= 30) && (eProtect == FlashExecuteOnly))
|
|
{
|
|
return(-1);
|
|
}
|
|
}
|
|
|
|
//
|
|
// Set the protection based on the requested proection.
|
|
//
|
|
switch(eProtect)
|
|
{
|
|
//
|
|
// Make this block execute only.
|
|
//
|
|
case FlashExecuteOnly:
|
|
{
|
|
//
|
|
// Turn off the read and program bits for this block.
|
|
//
|
|
ulProtectRE &= ~(FLASH_FMP_BLOCK_0 << ulAddress);
|
|
ulProtectPE &= ~(FLASH_FMP_BLOCK_0 << ulAddress);
|
|
|
|
//
|
|
// We're done handling this protection.
|
|
//
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Make this block read only.
|
|
//
|
|
case FlashReadOnly:
|
|
{
|
|
//
|
|
// The block can not be made read only if it is execute only.
|
|
//
|
|
if(((ulProtectRE >> ulAddress) & FLASH_FMP_BLOCK_0) !=
|
|
FLASH_FMP_BLOCK_0)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Make this block read only.
|
|
//
|
|
ulProtectPE &= ~(FLASH_FMP_BLOCK_0 << ulAddress);
|
|
|
|
//
|
|
// We're done handling this protection.
|
|
//
|
|
break;
|
|
}
|
|
|
|
//
|
|
// Make this block read/write.
|
|
//
|
|
case FlashReadWrite:
|
|
default:
|
|
{
|
|
//
|
|
// The block can not be made read/write if it is not already
|
|
// read/write.
|
|
//
|
|
if((((ulProtectRE >> ulAddress) & FLASH_FMP_BLOCK_0) !=
|
|
FLASH_FMP_BLOCK_0) ||
|
|
(((ulProtectPE >> ulAddress) & FLASH_FMP_BLOCK_0) !=
|
|
FLASH_FMP_BLOCK_0))
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// The block is already read/write, so there is nothing to do.
|
|
//
|
|
return(0);
|
|
}
|
|
}
|
|
|
|
//
|
|
// For Stellaris Sandstorm-class devices, revision C1 and C2, the upper
|
|
// bits of the FMPPE register are used for JTAG options, and are not
|
|
// available for the FLASH protection scheme. When setting block
|
|
// protection, ensure that these bits are not altered.
|
|
//
|
|
if(CLASS_IS_SANDSTORM && (REVISION_IS_C1 || REVISION_IS_C2))
|
|
{
|
|
ulProtectRE &= ~(FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30);
|
|
ulProtectRE |= (HWREG(g_pulFMPRERegs[ulBank]) &
|
|
(FLASH_FMP_BLOCK_31 | FLASH_FMP_BLOCK_30));
|
|
}
|
|
|
|
//
|
|
// Set the new protection for the specified flash bank.
|
|
//
|
|
HWREG(g_pulFMPRERegs[ulBank]) = ulProtectRE;
|
|
HWREG(g_pulFMPPERegs[ulBank]) = ulProtectPE;
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Saves the flash protection settings.
|
|
//!
|
|
//! This function will make the currently programmed flash protection settings
|
|
//! permanent. This is a non-reversible operation; a chip reset or power cycle
|
|
//! will not change the flash protection.
|
|
//!
|
|
//! This function will not return until the protection has been saved.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if a hardware error is encountered.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashProtectSave(void)
|
|
{
|
|
int ulTemp, ulLimit;
|
|
|
|
//
|
|
// If running on a Sandstorm-class device, only trigger a save of the first
|
|
// two protection registers (FMPRE and FMPPE). Otherwise, save the
|
|
// entire bank of flash protection registers.
|
|
//
|
|
ulLimit = CLASS_IS_SANDSTORM ? 2 : 8;
|
|
for(ulTemp = 0; ulTemp < ulLimit; ulTemp++)
|
|
{
|
|
//
|
|
// Tell the flash controller to write the flash protection register.
|
|
//
|
|
HWREG(FLASH_FMA) = ulTemp;
|
|
HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT;
|
|
|
|
//
|
|
// Wait until the write has completed.
|
|
//
|
|
while(HWREG(FLASH_FMC) & FLASH_FMC_COMT)
|
|
{
|
|
}
|
|
}
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the user registers.
|
|
//!
|
|
//! \param pulUser0 is a pointer to the location to store USER Register 0.
|
|
//! \param pulUser1 is a pointer to the location to store USER Register 1.
|
|
//!
|
|
//! This function will read the contents of user registers (0 and 1), and
|
|
//! store them in the specified locations.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if a hardware error is encountered.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashUserGet(unsigned long *pulUser0, unsigned long *pulUser1)
|
|
{
|
|
//
|
|
// Verify that the pointers are valid.
|
|
//
|
|
ASSERT(pulUser0 != 0);
|
|
ASSERT(pulUser1 != 0);
|
|
|
|
//
|
|
// Verify that hardware supports user registers.
|
|
//
|
|
if(CLASS_IS_SANDSTORM)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Get and store the current value of the user registers.
|
|
//
|
|
*pulUser0 = HWREG(FLASH_USERREG0);
|
|
*pulUser1 = HWREG(FLASH_USERREG1);
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the user registers.
|
|
//!
|
|
//! \param ulUser0 is the value to store in USER Register 0.
|
|
//! \param ulUser1 is the value to store in USER Register 1.
|
|
//!
|
|
//! This function will set the contents of the user registers (0 and 1) to
|
|
//! the specified values.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if a hardware error is encountered.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashUserSet(unsigned long ulUser0, unsigned long ulUser1)
|
|
{
|
|
//
|
|
// Verify that hardware supports user registers.
|
|
//
|
|
if(CLASS_IS_SANDSTORM)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Save the new values into the user registers.
|
|
//
|
|
HWREG(FLASH_USERREG0) = ulUser0;
|
|
HWREG(FLASH_USERREG1) = ulUser1;
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Saves the user registers.
|
|
//!
|
|
//! This function will make the currently programmed user register settings
|
|
//! permanent. This is a non-reversible operation; a chip reset or power cycle
|
|
//! will not change this setting.
|
|
//!
|
|
//! This function will not return until the protection has been saved.
|
|
//!
|
|
//! \return Returns 0 on success, or -1 if a hardware error is encountered.
|
|
//
|
|
//*****************************************************************************
|
|
long
|
|
FlashUserSave(void)
|
|
{
|
|
//
|
|
// Verify that hardware supports user registers.
|
|
//
|
|
if(CLASS_IS_SANDSTORM)
|
|
{
|
|
return(-1);
|
|
}
|
|
|
|
//
|
|
// Setting the MSB of FMA will trigger a permanent save of a USER
|
|
// register. Bit 0 will indicate User 0 (0) or User 1 (1).
|
|
//
|
|
HWREG(FLASH_FMA) = 0x80000000;
|
|
HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT;
|
|
|
|
//
|
|
// Wait until the write has completed.
|
|
//
|
|
while(HWREG(FLASH_FMC) & FLASH_FMC_COMT)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Tell the flash controller to write the USER1 Register.
|
|
//
|
|
HWREG(FLASH_FMA) = 0x80000001;
|
|
HWREG(FLASH_FMC) = FLASH_FMC_WRKEY | FLASH_FMC_COMT;
|
|
|
|
//
|
|
// Wait until the write has completed.
|
|
//
|
|
while(HWREG(FLASH_FMC) & FLASH_FMC_COMT)
|
|
{
|
|
}
|
|
|
|
//
|
|
// Success.
|
|
//
|
|
return(0);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for the flash interrupt.
|
|
//!
|
|
//! \param pfnHandler is a pointer to the function to be called when the flash
|
|
//! interrupt occurs.
|
|
//!
|
|
//! This sets the handler to be called when the flash interrupt occurs. The
|
|
//! flash controller can generate an interrupt when an invalid flash access
|
|
//! occurs, such as trying to program or erase a read-only block, or trying to
|
|
//! read from an execute-only block. It can also generate an interrupt when a
|
|
//! program or erase operation has completed. The interrupt will be
|
|
//! automatically enabled when the handler is registered.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashIntRegister(void (*pfnHandler)(void))
|
|
{
|
|
//
|
|
// Register the interrupt handler, returning an error if an error occurs.
|
|
//
|
|
IntRegister(INT_FLASH, pfnHandler);
|
|
|
|
//
|
|
// Enable the flash interrupt.
|
|
//
|
|
IntEnable(INT_FLASH);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters the interrupt handler for the flash interrupt.
|
|
//!
|
|
//! This function will clear the handler to be called when the flash interrupt
|
|
//! occurs. This will also mask off the interrupt in the interrupt controller
|
|
//! so that the interrupt handler is no longer called.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashIntUnregister(void)
|
|
{
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(INT_FLASH);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(INT_FLASH);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables individual flash controller interrupt sources.
|
|
//!
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be enabled.
|
|
//! Can be any of the \b FLASH_FCIM_PROGRAM or \b FLASH_FCIM_ACCESS values.
|
|
//!
|
|
//! Enables the indicated flash controller interrupt sources. Only the sources
|
|
//! that are enabled can be reflected to the processor interrupt; disabled
|
|
//! sources have no effect on the processor.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashIntEnable(unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Enable the specified interrupts.
|
|
//
|
|
HWREG(FLASH_FCIM) |= ulIntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables individual flash controller interrupt sources.
|
|
//!
|
|
//! \param ulIntFlags is a bit mask of the interrupt sources to be disabled.
|
|
//! Can be any of the \b FLASH_FCIM_PROGRAM or \b FLASH_FCIM_ACCESS values.
|
|
//!
|
|
//! Disables the indicated flash controller interrupt sources. Only the
|
|
//! sources that are enabled can be reflected to the processor interrupt;
|
|
//! disabled sources have no effect on the processor.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashIntDisable(unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Disable the specified interrupts.
|
|
//
|
|
HWREG(FLASH_FCIM) &= ~(ulIntFlags);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current interrupt status.
|
|
//!
|
|
//! \param bMasked is false if the raw interrupt status is required and true if
|
|
//! the masked interrupt status is required.
|
|
//!
|
|
//! This returns the interrupt status for the flash controller. Either the raw
|
|
//! interrupt status or the status of interrupts that are allowed to reflect to
|
|
//! the processor can be returned.
|
|
//!
|
|
//! \return The current interrupt status, enumerated as a bit field of
|
|
//! \b FLASH_FCMISC_PROGRAM and \b FLASH_FCMISC_AMISC.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
FlashIntGetStatus(tBoolean bMasked)
|
|
{
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return(HWREG(FLASH_FCMISC));
|
|
}
|
|
else
|
|
{
|
|
return(HWREG(FLASH_FCRIS));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears flash controller interrupt sources.
|
|
//!
|
|
//! \param ulIntFlags is the bit mask of the interrupt sources to be cleared.
|
|
//! Can be any of the \b FLASH_FCMISC_PROGRAM or \b FLASH_FCMISC_AMISC values.
|
|
//!
|
|
//! The specified flash controller interrupt sources are cleared, so that they
|
|
//! no longer assert. This must be done in the interrupt handler to keep it
|
|
//! from being called again immediately upon exit.
|
|
//!
|
|
//! \note Since there is a write buffer in the Cortex-M3 processor, it may take
|
|
//! several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (since NVIC still sees the interrupt source
|
|
//! asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
FlashIntClear(unsigned long ulIntFlags)
|
|
{
|
|
//
|
|
// Clear the flash interrupt.
|
|
//
|
|
HWREG(FLASH_FCMISC) = ulIntFlags;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|