rt-thread/bsp/stm32/stm32f429-st-disco/board/ports/ili9341.h

146 lines
6.9 KiB
C

/*
* File : ili9341.h
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2020, RT-Thread Development Team
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
*
* Change Logs:
* Date Author Notes
* 2020-08-11 RT-Thread the first version
*/
#ifndef __ILI9341_H
#define __ILI9341_H
#ifdef __cplusplus
extern "C" {
#endif
/**
* @brief ILI9341 chip IDs
*/
#define ILI9341_ID 0x9341
/**
* @brief ILI9341 Registers
*/
/* Level 1 Commands */
#define LCD_SWRESET 0x01 /* Software Reset */
#define LCD_READ_DISPLAY_ID 0x04 /* Read display identification information */
#define LCD_RDDST 0x09 /* Read Display Status */
#define LCD_RDDPM 0x0A /* Read Display Power Mode */
#define LCD_RDDMADCTL 0x0B /* Read Display MADCTL */
#define LCD_RDDCOLMOD 0x0C /* Read Display Pixel Format */
#define LCD_RDDIM 0x0D /* Read Display Image Format */
#define LCD_RDDSM 0x0E /* Read Display Signal Mode */
#define LCD_RDDSDR 0x0F /* Read Display Self-Diagnostic Result */
#define LCD_SPLIN 0x10 /* Enter Sleep Mode */
#define LCD_SLEEP_OUT 0x11 /* Sleep out register */
#define LCD_PTLON 0x12 /* Partial Mode ON */
#define LCD_NORMAL_MODE_ON 0x13 /* Normal Display Mode ON */
#define LCD_DINVOFF 0x20 /* Display Inversion OFF */
#define LCD_DINVON 0x21 /* Display Inversion ON */
#define LCD_GAMMA 0x26 /* Gamma register */
#define LCD_DISPLAY_OFF 0x28 /* Display off register */
#define LCD_DISPLAY_ON 0x29 /* Display on register */
#define LCD_COLUMN_ADDR 0x2A /* Colomn address register */
#define LCD_PAGE_ADDR 0x2B /* Page address register */
#define LCD_GRAM 0x2C /* GRAM register */
#define LCD_RGBSET 0x2D /* Color SET */
#define LCD_RAMRD 0x2E /* Memory Read */
#define LCD_PLTAR 0x30 /* Partial Area */
#define LCD_VSCRDEF 0x33 /* Vertical Scrolling Definition */
#define LCD_TEOFF 0x34 /* Tearing Effect Line OFF */
#define LCD_TEON 0x35 /* Tearing Effect Line ON */
#define LCD_MAC 0x36 /* Memory Access Control register*/
#define LCD_VSCRSADD 0x37 /* Vertical Scrolling Start Address */
#define LCD_IDMOFF 0x38 /* Idle Mode OFF */
#define LCD_IDMON 0x39 /* Idle Mode ON */
#define LCD_PIXEL_FORMAT 0x3A /* Pixel Format register */
#define LCD_WRITE_MEM_CONTINUE 0x3C /* Write Memory Continue */
#define LCD_READ_MEM_CONTINUE 0x3E /* Read Memory Continue */
#define LCD_SET_TEAR_SCANLINE 0x44 /* Set Tear Scanline */
#define LCD_GET_SCANLINE 0x45 /* Get Scanline */
#define LCD_WDB 0x51 /* Write Brightness Display register */
#define LCD_RDDISBV 0x52 /* Read Display Brightness */
#define LCD_WCD 0x53 /* Write Control Display register*/
#define LCD_RDCTRLD 0x54 /* Read CTRL Display */
#define LCD_WRCABC 0x55 /* Write Content Adaptive Brightness Control */
#define LCD_RDCABC 0x56 /* Read Content Adaptive Brightness Control */
#define LCD_WRITE_CABC 0x5E /* Write CABC Minimum Brightness */
#define LCD_READ_CABC 0x5F /* Read CABC Minimum Brightness */
#define LCD_READ_ID1 0xDA /* Read ID1 */
#define LCD_READ_ID2 0xDB /* Read ID2 */
#define LCD_READ_ID3 0xDC /* Read ID3 */
/* Level 2 Commands */
#define LCD_RGB_INTERFACE 0xB0 /* RGB Interface Signal Control */
#define LCD_FRMCTR1 0xB1 /* Frame Rate Control (In Normal Mode) */
#define LCD_FRMCTR2 0xB2 /* Frame Rate Control (In Idle Mode) */
#define LCD_FRMCTR3 0xB3 /* Frame Rate Control (In Partial Mode) */
#define LCD_INVTR 0xB4 /* Display Inversion Control */
#define LCD_BPC 0xB5 /* Blanking Porch Control register */
#define LCD_DFC 0xB6 /* Display Function Control register */
#define LCD_ETMOD 0xB7 /* Entry Mode Set */
#define LCD_BACKLIGHT1 0xB8 /* Backlight Control 1 */
#define LCD_BACKLIGHT2 0xB9 /* Backlight Control 2 */
#define LCD_BACKLIGHT3 0xBA /* Backlight Control 3 */
#define LCD_BACKLIGHT4 0xBB /* Backlight Control 4 */
#define LCD_BACKLIGHT5 0xBC /* Backlight Control 5 */
#define LCD_BACKLIGHT7 0xBE /* Backlight Control 7 */
#define LCD_BACKLIGHT8 0xBF /* Backlight Control 8 */
#define LCD_POWER1 0xC0 /* Power Control 1 register */
#define LCD_POWER2 0xC1 /* Power Control 2 register */
#define LCD_VCOM1 0xC5 /* VCOM Control 1 register */
#define LCD_VCOM2 0xC7 /* VCOM Control 2 register */
#define LCD_NVMWR 0xD0 /* NV Memory Write */
#define LCD_NVMPKEY 0xD1 /* NV Memory Protection Key */
#define LCD_RDNVM 0xD2 /* NV Memory Status Read */
#define LCD_READ_ID4 0xD3 /* Read ID4 */
#define LCD_PGAMMA 0xE0 /* Positive Gamma Correction register */
#define LCD_NGAMMA 0xE1 /* Negative Gamma Correction register */
#define LCD_DGAMCTRL1 0xE2 /* Digital Gamma Control 1 */
#define LCD_DGAMCTRL2 0xE3 /* Digital Gamma Control 2 */
#define LCD_INTERFACE 0xF6 /* Interface control register */
/* Extend register commands */
#define LCD_POWERA 0xCB /* Power control A register */
#define LCD_POWERB 0xCF /* Power control B register */
#define LCD_DTCA 0xE8 /* Driver timing control A */
#define LCD_DTCB 0xEA /* Driver timing control B */
#define LCD_POWER_SEQ 0xED /* Power on sequence register */
#define LCD_3GAMMA_EN 0xF2 /* 3 Gamma enable register */
#define LCD_PRC 0xF7 /* Pump ratio control register */
/* Size of read registers */
#define LCD_READ_ID4_SIZE 3 /* Size of Read ID4 */
/** @defgroup ILI9341_Exported_Functions
* @{
*/
int ili9341_hw_init(void);
#ifdef __cplusplus
}
#endif
#endif /* __ILI9341_H */