617 lines
19 KiB
C
617 lines
19 KiB
C
//*****************************************************************************
|
|
//
|
|
// watchdog.c - Driver for the Watchdog Timer Module.
|
|
//
|
|
// Copyright (c) 2005-2011 Texas Instruments Incorporated. All rights reserved.
|
|
// Software License Agreement
|
|
//
|
|
// Texas Instruments (TI) is supplying this software for use solely and
|
|
// exclusively on TI's microcontroller products. The software is owned by
|
|
// TI and/or its suppliers, and is protected under applicable copyright
|
|
// laws. You may not combine this software with "viral" open-source
|
|
// software in order to form a larger program.
|
|
//
|
|
// THIS SOFTWARE IS PROVIDED "AS IS" AND WITH ALL FAULTS.
|
|
// NO WARRANTIES, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT
|
|
// NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
// A PARTICULAR PURPOSE APPLY TO THIS SOFTWARE. TI SHALL NOT, UNDER ANY
|
|
// CIRCUMSTANCES, BE LIABLE FOR SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
|
|
// DAMAGES, FOR ANY REASON WHATSOEVER.
|
|
//
|
|
// This is part of revision 8049 of the Stellaris Peripheral Driver Library.
|
|
//
|
|
//*****************************************************************************
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! \addtogroup watchdog_api
|
|
//! @{
|
|
//
|
|
//*****************************************************************************
|
|
|
|
#include "inc/hw_ints.h"
|
|
#include "inc/hw_memmap.h"
|
|
#include "inc/hw_types.h"
|
|
#include "inc/hw_watchdog.h"
|
|
#include "driverlib/debug.h"
|
|
#include "driverlib/interrupt.h"
|
|
#include "driverlib/watchdog.h"
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Determines if the watchdog timer is enabled.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This will check to see if the watchdog timer is enabled.
|
|
//!
|
|
//! \return Returns \b true if the watchdog timer is enabled, and \b false
|
|
//! if it is not.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
WatchdogRunning(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// See if the watchdog timer module is enabled, and return.
|
|
//
|
|
return(HWREG(ulBase + WDT_O_CTL) & WDT_CTL_INTEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the watchdog timer.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This will enable the watchdog timer counter and interrupt.
|
|
//!
|
|
//! \note This function will have no effect if the watchdog timer has
|
|
//! been locked.
|
|
//!
|
|
//! \sa WatchdogLock(), WatchdogUnlock()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogEnable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Enable the watchdog timer module.
|
|
//
|
|
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the watchdog timer reset.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Enables the capability of the watchdog timer to issue a reset to the
|
|
//! processor upon a second timeout condition.
|
|
//!
|
|
//! \note This function will have no effect if the watchdog timer has
|
|
//! been locked.
|
|
//!
|
|
//! \sa WatchdogLock(), WatchdogUnlock()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogResetEnable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Enable the watchdog reset.
|
|
//
|
|
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_RESEN;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the watchdog timer reset.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Disables the capability of the watchdog timer to issue a reset to the
|
|
//! processor upon a second timeout condition.
|
|
//!
|
|
//! \note This function will have no effect if the watchdog timer has
|
|
//! been locked.
|
|
//!
|
|
//! \sa WatchdogLock(), WatchdogUnlock()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogResetDisable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Disable the watchdog reset.
|
|
//
|
|
HWREG(ulBase + WDT_O_CTL) &= ~(WDT_CTL_RESEN);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the watchdog timer lock mechanism.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Locks out write access to the watchdog timer configuration registers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogLock(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Lock out watchdog register writes. Writing anything to the WDT_O_LOCK
|
|
// register causes the lock to go into effect.
|
|
//
|
|
HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_LOCKED;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables the watchdog timer lock mechanism.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Enables write access to the watchdog timer configuration registers.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogUnlock(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Unlock watchdog register writes.
|
|
//
|
|
HWREG(ulBase + WDT_O_LOCK) = WDT_LOCK_UNLOCK;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the state of the watchdog timer lock mechanism.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Returns the lock state of the watchdog timer registers.
|
|
//!
|
|
//! \return Returns \b true if the watchdog timer registers are locked, and
|
|
//! \b false if they are not locked.
|
|
//
|
|
//*****************************************************************************
|
|
tBoolean
|
|
WatchdogLockState(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Get the lock state.
|
|
//
|
|
return((HWREG(ulBase + WDT_O_LOCK) == WDT_LOCK_LOCKED) ? true : false);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the watchdog timer reload value.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//! \param ulLoadVal is the load value for the watchdog timer.
|
|
//!
|
|
//! This function sets the value to load into the watchdog timer when the count
|
|
//! reaches zero for the first time; if the watchdog timer is running when this
|
|
//! function is called, then the value is immediately loaded into the watchdog
|
|
//! timer counter. If the \e ulLoadVal parameter is 0, then an interrupt is
|
|
//! immediately generated.
|
|
//!
|
|
//! \note This function will have no effect if the watchdog timer has
|
|
//! been locked.
|
|
//!
|
|
//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogReloadGet()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogReloadSet(unsigned long ulBase, unsigned long ulLoadVal)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Set the load register.
|
|
//
|
|
HWREG(ulBase + WDT_O_LOAD) = ulLoadVal;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the watchdog timer reload value.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This function gets the value that is loaded into the watchdog timer when
|
|
//! the count reaches zero for the first time.
|
|
//!
|
|
//! \sa WatchdogReloadSet()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
WatchdogReloadGet(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Get the load register.
|
|
//
|
|
return(HWREG(ulBase + WDT_O_LOAD));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current watchdog timer value.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This function reads the current value of the watchdog timer.
|
|
//!
|
|
//! \return Returns the current value of the watchdog timer.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
WatchdogValueGet(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Get the current watchdog timer register value.
|
|
//
|
|
return(HWREG(ulBase + WDT_O_VALUE));
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Registers an interrupt handler for watchdog timer interrupt.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//! \param pfnHandler is a pointer to the function to be called when the
|
|
//! watchdog timer interrupt occurs.
|
|
//!
|
|
//! This function does the actual registering of the interrupt handler. This
|
|
//! will enable the global interrupt in the interrupt controller; the watchdog
|
|
//! timer interrupt must be enabled via WatchdogEnable(). It is the interrupt
|
|
//! handler's responsibility to clear the interrupt source via
|
|
//! WatchdogIntClear().
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \note For parts with a watchdog timer module that has the ability to
|
|
//! generate an NMI instead of a standard interrupt, this function will
|
|
//! register the standard watchdog interrupt handler. To register the NMI
|
|
//! watchdog handler, use IntRegister() to register the handler for the
|
|
//! \b FAULT_NMI interrupt.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogIntRegister(unsigned long ulBase, void (*pfnHandler)(void))
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Register the interrupt handler.
|
|
//
|
|
IntRegister(INT_WATCHDOG, pfnHandler);
|
|
|
|
//
|
|
// Enable the watchdog timer interrupt.
|
|
//
|
|
IntEnable(INT_WATCHDOG);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Unregisters an interrupt handler for the watchdog timer interrupt.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This function does the actual unregistering of the interrupt handler. This
|
|
//! function will clear the handler to be called when a watchdog timer
|
|
//! interrupt occurs. This will also mask off the interrupt in the interrupt
|
|
//! controller so that the interrupt handler no longer is called.
|
|
//!
|
|
//! \sa IntRegister() for important information about registering interrupt
|
|
//! handlers.
|
|
//!
|
|
//! \note For parts with a watchdog timer module that has the ability to
|
|
//! generate an NMI instead of a standard interrupt, this function will
|
|
//! unregister the standard watchdog interrupt handler. To unregister the NMI
|
|
//! watchdog handler, use IntUnregister() to unregister the handler for the
|
|
//! \b FAULT_NMI interrupt.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogIntUnregister(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Disable the interrupt.
|
|
//
|
|
IntDisable(INT_WATCHDOG);
|
|
|
|
//
|
|
// Unregister the interrupt handler.
|
|
//
|
|
IntUnregister(INT_WATCHDOG);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables the watchdog timer interrupt.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! Enables the watchdog timer interrupt.
|
|
//!
|
|
//! \note This function will have no effect if the watchdog timer has
|
|
//! been locked.
|
|
//!
|
|
//! \sa WatchdogLock(), WatchdogUnlock(), WatchdogEnable()
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogIntEnable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Enable the watchdog interrupt.
|
|
//
|
|
HWREG(ulBase + WDT_O_CTL) |= WDT_CTL_INTEN;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Gets the current watchdog timer interrupt status.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//! \param bMasked is \b false if the raw interrupt status is required and
|
|
//! \b true if the masked interrupt status is required.
|
|
//!
|
|
//! This returns the interrupt status for the watchdog timer module. Either
|
|
//! the raw interrupt status or the status of interrupt that is allowed to
|
|
//! reflect to the processor can be returned.
|
|
//!
|
|
//! \return Returns the current interrupt status, where a 1 indicates that the
|
|
//! watchdog interrupt is active, and a 0 indicates that it is not active.
|
|
//
|
|
//*****************************************************************************
|
|
unsigned long
|
|
WatchdogIntStatus(unsigned long ulBase, tBoolean bMasked)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Return either the interrupt status or the raw interrupt status as
|
|
// requested.
|
|
//
|
|
if(bMasked)
|
|
{
|
|
return(HWREG(ulBase + WDT_O_MIS));
|
|
}
|
|
else
|
|
{
|
|
return(HWREG(ulBase + WDT_O_RIS));
|
|
}
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Clears the watchdog timer interrupt.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! The watchdog timer interrupt source is cleared, so that it no longer
|
|
//! asserts.
|
|
//!
|
|
//! \note Because there is a write buffer in the Cortex-M3 processor, it may
|
|
//! take several clock cycles before the interrupt source is actually cleared.
|
|
//! Therefore, it is recommended that the interrupt source be cleared early in
|
|
//! the interrupt handler (as opposed to the very last action) to avoid
|
|
//! returning from the interrupt handler before the interrupt source is
|
|
//! actually cleared. Failure to do so may result in the interrupt handler
|
|
//! being immediately reentered (because the interrupt controller still sees
|
|
//! the interrupt source asserted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogIntClear(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Clear the interrupt source.
|
|
//
|
|
HWREG(ulBase + WDT_O_ICR) = WDT_INT_TIMEOUT;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Sets the type of interrupt generated by the watchdog.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//! \param ulType is the type of interrupt to generate.
|
|
//!
|
|
//! This function sets the type of interrupt that is generated if the watchdog
|
|
//! timer expires. \e ulType can be either \b WATCHDOG_INT_TYPE_INT to
|
|
//! generate a standard interrupt (the default) or \b WATCHDOG_INT_TYPE_NMI to
|
|
//! generate a non-maskable interrupt (NMI).
|
|
//!
|
|
//! When configured to generate an NMI, the watchdog interrupt must still be
|
|
//! enabled with WatchdogIntEnable(), and it must still be cleared inside the
|
|
//! NMI handler with WatchdogIntClear().
|
|
//!
|
|
//! \note The ability to select an NMI interrupt varies with the Stellaris part
|
|
//! in use. Please consult the datasheet for the part you are using to
|
|
//! determine whether this support is available.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogIntTypeSet(unsigned long ulBase, unsigned long ulType)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
ASSERT((ulType == WATCHDOG_INT_TYPE_INT) ||
|
|
(ulType == WATCHDOG_INT_TYPE_NMI));
|
|
|
|
//
|
|
// Set the interrupt type.
|
|
//
|
|
HWREG(ulBase + WDT_O_CTL) =
|
|
(HWREG(ulBase + WDT_O_CTL) & ~WDT_CTL_INTTYPE) | ulType;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Enables stalling of the watchdog timer during debug events.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This function allows the watchdog timer to stop counting when the processor
|
|
//! is stopped by the debugger. By doing so, the watchdog is prevented from
|
|
//! expiring (typically almost immediately from a human time perspective) and
|
|
//! resetting the system (if reset is enabled). The watchdog will instead
|
|
//! expired after the appropriate number of processor cycles have been executed
|
|
//! while debugging (or at the appropriate time after the processor has been
|
|
//! restarted).
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogStallEnable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Enable timer stalling.
|
|
//
|
|
HWREG(ulBase + WDT_O_TEST) |= WDT_TEST_STALL;
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
//! Disables stalling of the watchdog timer during debug events.
|
|
//!
|
|
//! \param ulBase is the base address of the watchdog timer module.
|
|
//!
|
|
//! This function disables the debug mode stall of the watchdog timer. By
|
|
//! doing so, the watchdog timer continues to count regardless of the processor
|
|
//! debug state.
|
|
//!
|
|
//! \return None.
|
|
//
|
|
//*****************************************************************************
|
|
void
|
|
WatchdogStallDisable(unsigned long ulBase)
|
|
{
|
|
//
|
|
// Check the arguments.
|
|
//
|
|
ASSERT((ulBase == WATCHDOG0_BASE) || (ulBase == WATCHDOG1_BASE));
|
|
|
|
//
|
|
// Disable timer stalling.
|
|
//
|
|
HWREG(ulBase + WDT_O_TEST) &= ~(WDT_TEST_STALL);
|
|
}
|
|
|
|
//*****************************************************************************
|
|
//
|
|
// Close the Doxygen group.
|
|
//! @}
|
|
//
|
|
//*****************************************************************************
|