libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/acm32f0x0-nucleo/libraries/HAL_Driver/Inc/HAL_RTC.h

686 lines
25 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
******************************************************************************
* @file HAL_RTC.h
* @version V1.0.0
* @date 2020
* @brief Header file of RTC HAL module.
******************************************************************************
*/
#ifndef __HAL_RTC_H__
#define __HAL_RTC_H__
#include "ACM32Fxx_HAL.h"
/************************************************************************************/
/* Registers Bits Definition */
/************************************************************************************/
/**************** Bit definition for RTC IE Register ***********************/
#define RTC_IE_STP2RIE (BIT16)
#define RTC_IE_STP2FIE (BIT15)
#define RTC_IE_STP1RIE (BIT14)
#define RTC_IE_STP1FIE (BIT13)
#define RTC_IE_ADJ32 (BIT12)
#define RTC_IE_ALM (BIT11)
#define RTC_IE_1KHZ (BIT10)
#define RTC_IE_256HZ (BIT9)
#define RTC_IE_64HZ (BIT8)
#define RTC_IE_16HZ (BIT7)
#define RTC_IE_8HZ (BIT6)
#define RTC_IE_4HZ (BIT5)
#define RTC_IE_2HZ (BIT4)
#define RTC_IE_SEC (BIT3)
#define RTC_IE_MIN (BIT2)
#define RTC_IE_HOUR (BIT1)
#define RTC_IE_DATE (BIT0)
/**************** Bit definition for RTC SR Register ***********************/
#define RTC_SR_STP2RIE (BIT16)
#define RTC_SR_STP2FIE (BIT15)
#define RTC_SR_STP1RIE (BIT14)
#define RTC_SR_STP1FIE (BIT13)
#define RTC_SR_ADJ32 (BIT12)
#define RTC_SR_ALM (BIT11)
#define RTC_SR_1KHZ (BIT10)
#define RTC_SR_256HZ (BIT9)
#define RTC_SR_64HZ (BIT8)
#define RTC_SR_16HZ (BIT7)
#define RTC_SR_8HZ (BIT6)
#define RTC_SR_4HZ (BIT5)
#define RTC_SR_2HZ (BIT4)
#define RTC_SR_SEC (BIT3)
#define RTC_SR_MIN (BIT2)
#define RTC_SR_HOUR (BIT1)
#define RTC_SR_DATE (BIT0)
/**************** Bit definition for RTC CR Register ***********************/
#define RTC_CR_TAMPFLTCLK (BIT22)
#define RTC_CR_TS2EDGE (BIT21)
#define RTC_CR_TAMP2FLT (BIT19|BIT20)
#define RTC_CR_TAMP2FLTEN (BIT18)
#define RTC_CR_TAMP2FCLR (BIT17)
#define RTC_CR_TAMP2RCLR (BIT16)
#define RTC_CR_TS1EDGE (BIT15)
#define RTC_CR_TAMP1FLT (BIT13|BIT14)
#define RTC_CR_TAMP1FLTEN (BIT12)
#define RTC_CR_ALM_MKSD (BIT11)
#define RTC_CR_ALM_MSKH (BIT10)
#define RTC_CR_ALM_MSKM (BIT9)
#define RTC_CR_TAMP1FCLR (BIT8)
#define RTC_CR_TAMP1RCLR (BIT7)
#define RTC_CR_TAMP2EN (BIT6)
#define RTC_CR_TAMP1EN (BIT5)
#define RTC_CR_ALM_EN (BIT4)
#define RTC_CR_FSEL (BIT0|BIT1|BIT2|BIT3)
/**************** Bit definition for RTC_PMU CR Register ***********************/
#define RPMU_CR_WU6FILEN BIT29
#define RPMU_CR_WU5FILEN BIT28
#define RPMU_CR_WU4FILEN BIT27
#define RPMU_CR_WU3FILEN BIT26
#define RPMU_CR_WU2FILEN BIT25
#define RPMU_CR_WU1FILEN BIT24
#define RPMU_CR_EWUP6 BIT21
#define RPMU_CR_EWUP5 BIT20
#define RPMU_CR_EWUP4 BIT19
#define RPMU_CR_EWUP3 BIT18
#define RPMU_CR_EWUP2 BIT17
#define RPMU_CR_EWUP1 BIT16
#define RPMU_CR_BORRST_EN BIT12
#define RPMU_CR_WK_TIME (BIT9|BIT10|BIT11)
#define RPMU_CR_STB_EN BIT8
#define RPMU_CR_BDRST BIT6
#define RPMU_CR_RTCEN BIT5
#define RPMU_CR_RTCSEL (BIT2|BIT3)
#define RPMU_CR_CWUF BIT1
#define RPMU_CR_CSBF BIT0
/**************** Bit definition for RTC_PMU ANACR Register ***********************/
#define RPMU_SR_BORWUF BIT13
#define RPMU_SR_IWDTWUF BIT12
#define RPMU_SR_RSTWUF BIT11
#define RPMU_SR_RTCWUF BIT10
#define RPMU_SR_WUP6F BIT6
#define RPMU_SR_WUP5F BIT5
#define RPMU_SR_WUP4F BIT4
#define RPMU_SR_WUP3F BIT3
#define RPMU_SR_WUP2F BIT2
#define RPMU_SR_WUP1F BIT1
#define RPMU_SR_SBF BIT0
/**************** Bit definition for RTC_PMU ANACR Register ***********************/
#define RPMU_ANACR_BOR_CFG (BIT24|BIT25)
#define RPMU_ANACR_BOR_EN BIT23
#define RPMU_ANACR_LPBGR_TRIM (BIT20|BIT21|BIT22)
#define RPMU_ANACR_RC32K_TRIM (BIT10|BIT11|BIT12|BIT13|BIT14|BIT15)
#define RPMU_ANACR_RC32K_RDY BIT9
#define RPMU_ANACR_RC32K_EN BIT8
#define RPMU_ANACR_XTLDRV_2 BIT5
#define RPMU_ANACR_XTLDRV_1 BIT4
#define RPMU_ANACR_XTLDRV_0 BIT3
#define RPMU_ANACR_XTLDRV (BIT3|BIT4|BIT5)
#define RPMU_ANACR_XTLBYO BIT2
#define RPMU_ANACR_XTLRDY BIT1
#define RPMU_ANACR_XTLEN BIT0
/** @defgroup ClockSource
* @{
*/
#define RTC_CLOCK_RC32K (0x00000000)
#define RTC_CLOCK_XTL (0x00000004)
/**
* @}
*/
/** @defgroup Clock_Compensation
* @{
*/
#define COMPENSATION_INCREASE (0x00000000)
#define COMPENSATION_DECREASE (0x00000400)
/**
* @}
*/
/** @defgroup RTC_Month_Date_Definitions RTC Month Date Definitions
* @{
*/
/* Coded in BCD format */
#define RTC_MONTH_JANUARY (0x01)
#define RTC_MONTH_FEBRUARY (0x02)
#define RTC_MONTH_MARCH (0x03)
#define RTC_MONTH_APRIL (0x04)
#define RTC_MONTH_MAY (0x05)
#define RTC_MONTH_JUNE (0x06)
#define RTC_MONTH_JULY (0x07)
#define RTC_MONTH_AUGUST (0x08)
#define RTC_MONTH_SEPTEMBER (0x09)
#define RTC_MONTH_OCTOBER (0x10)
#define RTC_MONTH_NOVEMBER (0x11)
#define RTC_MONTH_DECEMBER (0x12)
/**
* @}
*/
/** @defgroup RTC_WeekDay_Definitions RTC WeekDay Definitions
* @{
*/
#define RTC_WEEKDAY_MONDAY (0x01)
#define RTC_WEEKDAY_TUESDAY (0x02)
#define RTC_WEEKDAY_WEDNESDAY (0x03)
#define RTC_WEEKDAY_THURSDAY (0x04)
#define RTC_WEEKDAY_FRIDAY (0x05)
#define RTC_WEEKDAY_SATURDAY (0x06)
#define RTC_WEEKDAY_SUNDAY (0x07)
/**
* @}
*/
/** @defgroup RTC_Alarm_Mode Definitions
* @{
*/
#define RTC_ALARM_WEEK_MODE (0x00000000)
#define RTC_ALARM_DAY_MODE (0x80000000)
/**
* @}
*/
/** @defgroup RTC_AlarmInterrupt Definitions
* @{
*/
#define RTC_ALARM_INT_ENABLE (0x00000000)
#define RTC_ALARM_INT_DISABLE (0x00000001)
/**
* @}
*/
/** @defgroup RTC_DayMask Definitions
* @{
*/
#define RTC_ALARM_DAY_MASK_ENABLE RTC_CR_ALM_MKSD
#define RTC_ALARM_DAY_MASK_DISABLE (0x00000000)
/**
* @}
*/
/** @defgroup RTC_HourMask Definitions
* @{
*/
#define RTC_ALARM_HOUR_MASK_ENABLE RTC_CR_ALM_MSKH
#define RTC_ALARM_HOUR_MASK_DISABLE (0x00000000)
/**
* @}
*/
/** @defgroup RTC_MinMask Definitions
* @{
*/
#define RTC_ALARM_MIN_MASK_ENABLE RTC_CR_ALM_MSKM
#define RTC_ALARM_MIN_MASK_DISABLE (0x00000000)
/**
* @}
*/
/** @defgroup RTC_Alarm_WeekSelect Definitions
* @{
*/
#define RTC_ALARM_WEEK_SUNDAY (0x01000000)
#define RTC_ALARM_WEEK_MONDAY (0x02000000)
#define RTC_ALARM_WEEK_TUESDAY (0x04000000)
#define RTC_ALARM_WEEK_WEDNESDAY (0x08000000)
#define RTC_ALARM_WEEK_THURSDAY (0x10000000)
#define RTC_ALARM_WEEK_FRIDAY (0x20000000)
#define RTC_ALARM_WEEK_SATURDAY (0x40000000)
/**
* @}
*/
/** @defgroup RTC_Temper_edge Definitions
* @{
*/
#define RTC_TEMP_EDGE_RISING (0x00000000)
#define RTC_TEMP_EDGE_FALLING (0x00000001)
/**
* @}
*/
/** @defgroup RTC_TemperInterrupt Definitions
* @{
*/
#define RTC_TEMP_INT_DISABLE (0x00000000)
#define RTC_TEMP_INT_ENABLE (0x00000001)
/**
* @}
*/
/** @defgroup RTC_ClearBackup Definitions
* @{
*/
#define RTC_TEMP_CLEAR_DISABLE (0x00000000)
#define RTC_TEMP_CLEAR_ENABLE (0x00000001)
/**
* @}
*/
/** @defgroup RTC_TemperFilter Definitions
* @{
*/
#define RTC_TEMP_FILTER_DISABLE (0x00000000)
#define RTC_TEMP_FILTER_512_RTCCLK (0x00000001)
#define RTC_TEMP_FILTER_1_RTCCLK (0x00000002)
#define RTC_TEMP_FILTER_2_RTCCLK (0x00000003)
#define RTC_TEMP_FILTER_4_RTCCLK (0x00000004)
#define RTC_TEMP_FILTER_8_RTCCLK (0x00000005)
/**
* @}
*/
/**
* @brief RTC Temper index definition
*/
typedef enum
{
RTC_TEMPER_1,
RTC_TEMPER_2,
}enum_Temper_t;
/**
* @}
*/
/**
* @brief RTC wakeup source form standby
*/
typedef enum
{
RTC_WAKEUP_RTC_INT = 0,
RTC_WAKEUP_WKUP1 = 0x00010000, // PA0
RTC_WAKEUP_WKUP2 = 0x00020000, // PC13
RTC_WAKEUP_WKUP3 = 0x00040000, // PA2
RTC_WAKEUP_WKUP4 = 0x00080000, // PC5
RTC_WAKEUP_WKUP5 = 0x00100000, // PB5
RTC_WAKEUP_WKUP6 = 0x00200000, // PB15
RTC_WAKEUP_STAMP2 = (RTC_IE_STP2RIE | RTC_IE_STP2FIE),
RTC_WAKEUP_STAMP1 = (RTC_IE_STP1RIE | RTC_IE_STP1FIE),
RTC_WAKEUP_32S = RTC_IE_ADJ32,
RTC_WAKEUP_ALARM = RTC_IE_ALM,
RTC_WAKEUP_SEC = RTC_IE_SEC,
RTC_WAKEUP_MIN = RTC_IE_MIN,
RTC_WAKEUP_HOUR = RTC_IE_HOUR,
RTC_WAKEUP_DATE = RTC_IE_DATE,
}enum_WKUP_t;
#define STANDBY_WAKEUP_RISING 0
#define STANDBY_WAKEUP_FALLING 1
/**
* @}
*/
/**
* @brief Check RTC wakeup source form standby
*/
#define RTC_WAKEUP_SOURCE_BORWUF (0x00002000)
#define RTC_WAKEUP_SOURCE_IWDTWUF (0x00001000)
#define RTC_WAKEUP_SOURCE_RSTWUF (0x00000800)
#define RTC_WAKEUP_SOURCE_RTCWUF (0x00000400)
#define RTC_WAKEUP_SOURCE_WKUP6 (0x00000040)
#define RTC_WAKEUP_SOURCE_WKUP5 (0x00000020)
#define RTC_WAKEUP_SOURCE_WKUP4 (0x00000010)
#define RTC_WAKEUP_SOURCE_WKUP3 (0x00000008)
#define RTC_WAKEUP_SOURCE_WKUP2 (0x00000004)
#define RTC_WAKEUP_SOURCE_WKUP1 (0x00000002)
/**
* @}
*/
/**
* @brief RTC Configuration Structure definition
*/
typedef struct
{
uint32_t u32_ClockSource; /*!< The RTC Clock Source to be configured.
This parameter can be a value of @ref ClockSource */
uint32_t u32_Compensation; /*!< The RTC Clock Compensation to be configured.
This parameter can be a value of @ref Clock_Compensation */
uint32_t u32_CompensationValue; /*!< The RTC Clock Compensation Value to be configured.
This parameter must be a number between Min_Data = 0x000 and Max_Data = 0x1FF */
}RTC_ConfigTypeDef;
/**
* @brief RTC Date structure definition
*/
typedef struct
{
uint8_t u8_Year; /*!< Specifies the RTC Date Year.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x99 */
uint8_t u8_Month; /*!< Specifies the RTC Date Month (in BCD format).
This parameter can be a value of @ref RTC_Month_Date_Definitions */
uint8_t u8_Date; /*!< Specifies the RTC Date.
This parameter must be a number between Min_Data = 0x01 and Max_Data = 0x31 */
uint8_t u8_WeekDay; /*!< Specifies the RTC Date WeekDay.
This parameter can be a value of @ref RTC_WeekDay_Definitions */
}RTC_DateTypeDef;
/* Attention: Year、Month、Date、Week use BCD code */
/**
* @brief RTC Time structure definition
*/
typedef struct
{
uint8_t u8_Hours; /*!< Specifies the RTC Time Hour.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x23 */
uint8_t u8_Minutes; /*!< Specifies the RTC Time Minutes.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x59 */
uint8_t u8_Seconds; /*!< Specifies the RTC Time Seconds.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x59 */
}RTC_TimeTypeDef;
/* Attention: Hour、Minute、Second use BCD code */
/**
* @brief RTC Time structure definition
*/
typedef struct
{
uint32_t u32_AlarmMode; /*!< Specifies the RTC alarm Mode.
This parameter can be a value of @ref RTC_Alarm_Mode */
uint32_t u32_AlarmInterrupt; /*!< Specifies the RTC alarm interrupt Enable or Disable.
This parameter can be a value of @ref RTC_AlarmInterrupt */
uint32_t u32_DayMask; /*!< Specifies the RTC alarm Day/Week Mask.
This parameter can be a value of @ref RTC_DayMask */
uint32_t u32_HourMask; /*!< Specifies the RTC alarm Hour Mask.
This parameter can be a value of @ref RTC_HourMask */
uint32_t u32_MinMask; /*!< Specifies the RTC alarm Min Mask.
This parameter can be a value of @ref RTC_MinMask */
uint32_t u32_AlarmWeek; /*!< Specifies the RTC alarm week select(Select WeekMode this parameter is valid).
This parameter can be a value of @ref RTC_Alarm_WeekSelect */
uint32_t u32_AlarmDay; /*!< Specifies the RTC alarm day select(Select DayMode this parameter is valid).
This parameter must be a number between Min_Data = 0x01 and Max_Data = 0x31 */
uint32_t u32_Hours; /*!< Specifies the RTC alarm Hour.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x23 */
uint32_t u32_Minutes; /*!< Specifies the RTC alarm Minutes.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x59 */
uint32_t u32_Seconds; /*!< Specifies the RTC alarm Seconds.
This parameter must be a number between Min_Data = 0x00 and Max_Data = 0x59 */
}RTC_AlarmTypeDef;
/**
* @brief RTC Temper structure definition
*/
typedef struct
{
uint32_t u32_TemperEdge; /*!< Specifies the RTC Temper edge select.
This parameter can be a value of @ref RTC_Temper_edge */
uint32_t u32_InterruptEN; /*!< Specifies the RTC Temper interrupt enable.
This parameter can be a value of @ref RTC_TemperInterrupt */
uint32_t u32_ClearBackup; /*!< Specifies the RTC Temper clear backup register.
This parameter can be a value of @ref RTC_ClearBackup */
uint32_t u32_Filter; /*!< Specifies the RTC Temper Filter select.
This parameter can be a value of @ref RTC_TemperFilter */
}RTC_TemperTypeDef;
/** @brief PC13 function select
* @param __FUNC__: PC13 function select.
* This parameter can be 0: GPIO，1：RTC Fout，2：RTC tamper 3：PC13 Value
*/
#define __HAL_RTC_PC13_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3)) | (__FUNC__))
/** @brief PC14 function select
* @param __FUNC__: PC14 function select.
* This parameter can be 0: GPIO，1：PC14 Value
*/
#define __HAL_RTC_PC14_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3 << 3)) | (__FUNC__ << 3))
/** @brief PC15 function select
* @param __FUNC__: PC15 function select.
* This parameter can be 0: GPIO，1：PC15 Value
*/
#define __HAL_RTC_PC15_SEL(__FUNC__) (PMU->IOSEL |= (PMU->IOSEL & ~(0x3 << 5)) | (__FUNC__ << 5))
/** @brief PC13 Value set
* @param __FUNC__: PC13 Value set.
* This parameter can be 0: set，1：claer
*/
#define __HAL_RTC_PC13_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 8)) | (__VALUE__ << 8))
/** @brief PC14 Value set
* @param __FUNC__: PC14 Value set.
* This parameter can be 0: set，1：claer
*/
#define __HAL_RTC_PC14_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 9)) | (__VALUE__ << 9))
/** @brief PC15 Value set
* @param __FUNC__: PC15 Value set.
* This parameter can be 0: set，1：claer
*/
#define __HAL_RTC_PC15_VALUE(__VALUE__) (PMU->IOSEL |= (PMU->IOSEL & ~(1 << 10)) | (__VALUE__ << 10))
/* @brief PC13、PC14、PC15 pull up or pull down */
#define __HAL_RTC_PC13_PULL_UP_ENABLE() (PMU->IOCR |= BIT0)
#define __HAL_RTC_PC13_PULL_UP_DISABLE() (PMU->IOCR &= ~BIT0)
#define __HAL_RTC_PC13_PULL_DOWN_ENABLE() (PMU->IOCR |= BIT1)
#define __HAL_RTC_PC13_PULL_DOWN_DISABLE() (PMU->IOCR &= ~BIT1)
#define __HAL_RTC_PC14_PULL_UP_ENABLE() (PMU->IOCR |= BIT8)
#define __HAL_RTC_PC14_PULL_UP_DISABLE() (PMU->IOCR &= ~BIT8)
#define __HAL_RTC_PC14_PULL_DOWN_ENABLE() (PMU->IOCR |= BIT9)
#define __HAL_RTC_PC14_PULL_DOWN_DISABLE() (PMU->IOCR &= ~BIT9)
#define __HAL_RTC_PC15_PULL_UP_ENABLE() (PMU->IOCR |= BIT16)
#define __HAL_RTC_PC15_PULL_UP_DISABLE() (PMU->IOCR &= ~BIT16)
#define __HAL_RTC_PC15_PULL_DOWN_ENABLE() (PMU->IOCR |= BIT17)
#define __HAL_RTC_PC15_PULL_DOWN_DISABLE() (PMU->IOCR &= ~BIT17)
/* @brief PC13、PC14、PC15 digit or analog */
#define __HAL_RTC_PC13_ANALOG() (PMU->IOCR |= BIT6)
#define __HAL_RTC_PC13_DIGIT() (PMU->IOCR &= ~BIT6)
#define __HAL_RTC_PC14_ANALOG() (PMU->IOCR |= BIT14)
#define __HAL_RTC_PC14_DIGIT() (PMU->IOCR &= ~BIT14)
#define __HAL_RTC_PC15_ANALOG() (PMU->IOCR |= BIT22)
#define __HAL_RTC_PC15_DIGIT() (PMU->IOCR &= ~BIT22)
/** @defgroup RTC Private Macros
* @{
*/
#define IS_RTC_CLOCKSRC(__CLOCKSRC__) (((__CLOCKSRC__) == RTC_CLOCK_RC32K) || \
((__CLOCKSRC__) == RTC_CLOCK_XTL))
#define IS_RTC_COMPENSATION(__COMPENSATION__) (((__COMPENSATION__) == COMPENSATION_INCREASE) || \
((__COMPENSATION__) == COMPENSATION_DECREASE))
#define IS_RTC_YEAR(__YEAR__) ((__YEAR__) <= 0x99)
#define IS_RTC_MONTH(__MONTH__) (((__MONTH__) == RTC_MONTH_JANUARY) || \
((__MONTH__) == RTC_MONTH_FEBRUARY) || \
((__MONTH__) == RTC_MONTH_MARCH) || \
((__MONTH__) == RTC_MONTH_APRIL) || \
((__MONTH__) == RTC_MONTH_MAY) || \
((__MONTH__) == RTC_MONTH_JUNE) || \
((__MONTH__) == RTC_MONTH_JULY) || \
((__MONTH__) == RTC_MONTH_AUGUST) || \
((__MONTH__) == RTC_MONTH_SEPTEMBER) || \
((__MONTH__) == RTC_MONTH_OCTOBER) || \
((__MONTH__) == RTC_MONTH_NOVEMBER) || \
((__MONTH__) == RTC_MONTH_DECEMBER))
#define IS_RTC_DAY(__DAY__) ((__DAY__) >= 0x01 && (__DAY__) <= 0x31)
#define IS_RTC_WEEKDAY(__WEEKDAY__) (((__WEEKDAY__) == RTC_WEEKDAY_MONDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_TUESDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_WEDNESDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_THURSDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_FRIDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_SATURDAY) || \
((__WEEKDAY__) == RTC_WEEKDAY_SUNDAY))
#define IS_RTC_HOUR(__HOUR__) ((__HOUR__) <= 0x23)
#define IS_RTC_MIN(__MIN__) ((__MIN__) <= 0x59)
#define IS_RTC_SEC(__SEC__) ((__SEC__) <= 0x60)
#define IS_RTC_ALARM_MODE(__MODE__) (((__MODE__) == RTC_ALARM_WEEK_MODE) || \
((__MODE__) == RTC_ALARM_DAY_MODE))
#define IS_RTC_ALARM_INT(__INT__) (((__INT__) == RTC_ALARM_INT_ENABLE) || \
((__INT__) == RTC_ALARM_INT_DISABLE))
#define IS_RTC_ALARM_DAY_MASK(__MASKD__) (((__MASKD__) == RTC_ALARM_DAY_MASK_ENABLE) || \
((__MASKD__) == RTC_ALARM_DAY_MASK_DISABLE))
#define IS_RTC_ALARM_HOUR_MASK(__MASKH__) (((__MASKH__) == RTC_ALARM_HOUR_MASK_ENABLE) || \
((__MASKH__) == RTC_ALARM_HOUR_MASK_DISABLE))
#define IS_RTC_ALARM_MIN_MASK(__MASKM__) (((__MASKM__) == RTC_ALARM_MIN_MASK_ENABLE) || \
((__MASKM__) == RTC_ALARM_MIN_MASK_DISABLE))
#define IS_RTC_ALARM_WEEKDAY(__WEEKDAY__) (((__WEEKDAY__) == RTC_ALARM_WEEK_SUNDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_MONDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_TUESDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_WEDNESDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_THURSDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_FRIDAY) || \
((__WEEKDAY__) == RTC_ALARM_WEEK_SATURDAY) || \
((__WEEKDAY__) >= 0x01000000 && (__WEEKDAY__) <= 0x7F000000))
#define IS_RTC_TEMP_EDGE(__EDGE__) (((__EDGE__) == RTC_TEMP_EDGE_RISING) || \
((__EDGE__) == RTC_TEMP_EDGE_FALLING))
#define IS_RTC_TEMP_INT(__INT__) (((__INT__) == RTC_TEMP_INT_ENABLE) || \
((__INT__) == RTC_TEMP_INT_DISABLE))
#define IS_RTC_TEMP_CLEAR_BACKUP(__CLEAR__) (((__CLEAR__) == RTC_TEMP_CLEAR_DISABLE) || \
((__CLEAR__) == RTC_TEMP_CLEAR_ENABLE))
#define IS_RTC_TEMP_FILTER(__FILTER__) (((__FILTER__) == RTC_TEMP_FILTER_DISABLE) || \
((__FILTER__) == RTC_TEMP_FILTER_512_RTCCLK) || \
((__FILTER__) == RTC_TEMP_FILTER_1_RTCCLK) || \
((__FILTER__) == RTC_TEMP_FILTER_2_RTCCLK) || \
((__FILTER__) == RTC_TEMP_FILTER_4_RTCCLK) || \
((__FILTER__) == RTC_TEMP_FILTER_8_RTCCLK))
/**
* @}
*/
/* RTC stamp1 interrupt enable、disable */
#define __HAL_RTC_ENABLE_STAMP1_IT (RTC->IE |= (RTC_IE_STP1RIE | RTC_IE_STP1FIE))
#define __HAL_RTC_DISABLE_STAMP1_IT (RTC->IE &= ~(RTC_IE_STP1RIE | RTC_IE_STP1FIE))
/* RTC stamp2 interrupt enable、disable */
#define __HAL_RTC_ENABLE_STAMP2_IT (RTC->IE |= (RTC_IE_STP2RIE | RTC_IE_STP2FIE))
#define __HAL_RTC_DISABLE_STAMP2_IT (RTC->IE &= ~(RTC_IE_STP2RIE | RTC_IE_STP2FIE))
/* RTC 32S interrupt enable、disable */
#define __HAL_RTC_ENABLE_32S_IT (RTC->IE |= RTC_IE_ADJ32)
#define __HAL_RTC_DISABLE_32S_IT (RTC->IE &= ~RTC_IE_ADJ32)
/* RTC alarm interrupt enable、disable */
#define __HAL_RTC_ENABLE_ALM_IT (RTC->IE |= RTC_IE_ALM)
#define __HAL_RTC_DISABLE_ALM_IT (RTC->IE &= RTC_IE_ALM)
/* RTC sec interrupt enable、disable */
#define __HAL_RTC_ENABLE_SEC_IT (RTC->IE |= RTC_IE_SEC)
#define __HAL_RTC_DISABLE_SEC_IT (RTC->IE &= ~RTC_IE_SEC)
/* RTC Minutes interrupt enable、disable */
#define __HAL_RTC_ENABLE_MIN_IT (RTC->IE |= RTC_IE_MIN)
#define __HAL_RTC_DISABLE_MIN_IT (RTC->IE &= ~RTC_IE_MIN)
/* RTC Hour interrupt enable、disable */
#define __HAL_RTC_ENABLE_HOUR_IT (RTC->IE |= RTC_IE_HOUR)
#define __HAL_RTC_DISABLE_HOUR_IT (RTC->IE &= ~RTC_IE_HOUR)
/* RTC Date interrupt enable、disable */
#define __HAL_RTC_ENABLE_DATE_IT (RTC->IE |= RTC_IE_DATE)
#define __HAL_RTC_DISABLE_DATE_IT (RTC->IE &= ~RTC_IE_DATE)
/* HAL_RTC_Config */
HAL_StatusTypeDef HAL_RTC_Config(RTC_ConfigTypeDef *hrtc);
/* HAL_RTC_SetTime */
void HAL_RTC_SetTime(RTC_TimeTypeDef *fp_Time);
/* HAL_RTC_GetTime */
void HAL_RTC_GetTime(RTC_TimeTypeDef *fp_Time);
/* HAL_RTC_SetDate */
void HAL_RTC_SetDate(RTC_DateTypeDef *fp_Date);
/* HAL_RTC_GetDate */
void HAL_RTC_GetDate(RTC_DateTypeDef *fp_Date);
/* HAL_RTC_AlarmConfig */
void HAL_RTC_AlarmConfig(RTC_AlarmTypeDef *fp_Alarm);
/* HAL_RTC_AlarmEnable */
void HAL_RTC_AlarmEnable(void);
/* HAL_RTC_AlarmDisable */
void HAL_RTC_AlarmDisable(void);
/* HAL_RTC_Tamper */
void HAL_RTC_Tamper(enum_Temper_t fe_Temper, RTC_TemperTypeDef *fp_Temper);
/* HAL_RTC_TamperEnable */
void HAL_RTC_TamperEnable(enum_Temper_t fe_Temper);
/* HAL_RTC_TamperDisable */
void HAL_RTC_TamperDisable(enum_Temper_t fe_Temper);
/* HAL_RTC_Standby_Wakeup */
void HAL_RTC_Standby_Wakeup(enum_WKUP_t fe_Wakeup, uint32_t fu32_Edge);
/* HAL_RTC_Get_StandbyStatus */
bool HAL_RTC_Get_StandbyStatus(void);
/* HAL_RTC_Get_StandbyWakeupSource */
uint32_t HAL_RTC_Get_StandbyWakeupSource(void);
#endif
View Git Blame Copy Permalink