rt-thread/bsp/mini2440/drivers/s3cmci.c

328 lines
6.7 KiB
C

/*
* Copyright (c) 2006-2018, RT-Thread Development Team
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2020-04-15 Jonne first version for s3c2440 mmc controller
*/
#include <rthw.h>
#include <rtthread.h>
#include <rtdevice.h>
#include <drivers/dev_mmcsd_core.h>
#include <s3c24x0.h>
#define S3C_PCLK 50000000
static void s3c_mmc_set_clk(struct rt_mmcsd_host *host, rt_uint32_t clock)
{
rt_uint32_t prescale;
rt_uint32_t realClk;
for(prescale = 0; prescale < 256; ++prescale)
{
realClk = S3C_PCLK / (1 + prescale);
if(realClk <= clock)
{
break;
}
}
SDIPRE = prescale;
host->io_cfg.clock = realClk;
}
static rt_uint32_t s3c_mmc_send_cmd(struct rt_mmcsd_host *host, struct rt_mmcsd_cmd *cmd)
{
rt_uint32_t ccon;
rt_uint32_t cmdSta;
SDICARG = cmd->arg;
ccon = cmd->cmd_code & 0x3f;
ccon |= (0 << 7) | (1 << 6); /* two start bits*/
ccon |= (1 << 8);/* command start*/
if(cmd->flags & 0xF)
{
// Need response
ccon |= (1 << 9);
}
if((cmd->flags & 0xF) == RESP_R2)
{
// R2 need 136bit response
ccon |= (1 << 10);
}
SDICCON = ccon; /* start cmd */
if(cmd->flags & 0xF)
{
cmdSta = SDICSTA;
while((cmdSta & 0x200) != 0x200 && (cmdSta & 0x400) != 0x400)
{
cmdSta = SDICSTA;
}
if((cmdSta & 0x1000) == 0x1000 && (cmd->flags & 0xF) != RESP_R3 && (cmd->flags & 0xF) != RESP_R4)
{
// crc error, but R3 R4 ignore it
SDICSTA = cmdSta;
return -RT_ERROR;
}
if((cmdSta & 0xF00) != 0xa00)
{
SDICSTA = cmdSta;
return -RT_ERROR;
}
cmd->resp[0] = SDIRSP0;
if((cmd->flags & 0xF) == RESP_R2)
{
cmd->resp[1] = SDIRSP1;
cmd->resp[2] = SDIRSP2;
cmd->resp[3] = SDIRSP3;
}
}
else
{
cmdSta = SDICSTA;
while((cmdSta & 0x800) != 0x800)
{
cmdSta = SDICSTA;
}
}
SDICSTA = cmdSta; // clear current status
return RT_EOK;
}
static rt_uint32_t s3c_mmc_xfer_data(struct rt_mmcsd_data *data)
{
rt_uint32_t status;
rt_uint32_t xfer_size;
rt_uint32_t handled_size = 0;
rt_uint32_t *pBuf = RT_NULL;
if(data == RT_NULL)
{
return -RT_ERROR;
}
xfer_size = data->blks * data->blksize;
pBuf = data->buf;
if(data->flags & DATA_DIR_READ)
{
while(handled_size < xfer_size)
{
if ((SDIDSTA & 0x20) == 0x20)
{
SDIDSTA = (0x1 << 0x5);
break;
}
status = SDIFSTA;
if ((status & 0x1000) == 0x1000)
{
*pBuf++ = SDIDAT;
handled_size += 4;
}
}
}
else
{
while(handled_size < xfer_size)
{
status = SDIFSTA;
if ((status & 0x2000) == 0x2000)
{
SDIDAT = *pBuf++;
handled_size += 4;
}
}
}
// wait for end
status = SDIDSTA;
while((status & 0x30) == 0)
{
status = SDIDSTA;
}
SDIDSTA = status;
if ((status & 0xfc) != 0x10)
{
return -RT_ERROR;
}
SDIDCON = SDIDCON & ~(7<<12);
SDIFSTA = SDIFSTA & 0x200;
SDIDSTA = 0x10;
return RT_EOK;
}
static void mmc_request(struct rt_mmcsd_host *host, struct rt_mmcsd_req *req)
{
rt_uint32_t ret;
struct rt_mmcsd_cmd *cmd;
struct rt_mmcsd_data *data;
rt_uint32_t val;
rt_uint32_t tryCnt = 0;
if(req->cmd == RT_NULL)
{
goto out;
}
cmd = req->cmd;
/* prepare for data transfer*/
if(req->data != RT_NULL)
{
SDIFSTA = SDIFSTA | (1<<16); // reset fifo
while(SDIDSTA & 0x03)
{
if(tryCnt++ > 500)
{
break;
SDIDSTA = SDIDSTA;
}
}
data = req->data;
if((data->blksize & 0x3) != 0)
{
goto out;
}
val = (2 << 22) //word transfer
| (1 << 20) // transmet after response
| (1 << 19) // reciveve after command sent
| (1 << 17) // block data transfer
| (1 << 14); // data start
if(host->io_cfg.bus_width == MMCSD_BUS_WIDTH_4)
{
val |= (1 << 16); // wide bus mode(4bit data)
}
if(data->flags & DATA_DIR_READ)
{
// for data read
val |= (2 << 12);
}
else
{
val |= (3 << 12);
}
val |= (data->blks & 0xFFF);
SDIDCON = val;
SDIBSIZE = data->blksize;
SDIDTIMER = 0x7fffff;
}
ret = s3c_mmc_send_cmd(host,req->cmd);
if(ret != RT_EOK) {
cmd->err = ret;
goto out;
}
if(req->data != RT_NULL)
{
/*do transfer data*/
ret = s3c_mmc_xfer_data(data);
if(ret != RT_EOK)
{
data->err = ret;
goto out;
}
}
out:
mmcsd_req_complete(host);
}
static void mmc_set_iocfg(struct rt_mmcsd_host *host, struct rt_mmcsd_io_cfg *io_cfg)
{
switch (io_cfg->power_mode) {
case MMCSD_POWER_ON:
case MMCSD_POWER_UP:
/* Enable PCLK into SDI Block */
CLKCON |= 1 << 9;
/* Setup GPIO as SD and SDCMD, SDDAT[3:0] Pull up En */
GPEUP = GPEUP & (~(0x3f << 5)) | (0x01 << 5);
GPECON = GPECON & (~(0xfff << 10)) | (0xaaa << 10);
break;
case MMCSD_POWER_OFF:
default:
break;
}
s3c_mmc_set_clk(host, io_cfg->clock);
SDICON = 1;
}
static rt_int32_t mmc_get_card_status(struct rt_mmcsd_host *host)
{
return RT_EOK;
}
static void mmc_enable_sdio_irq(struct rt_mmcsd_host *host, rt_int32_t en)
{
}
static const struct rt_mmcsd_host_ops ops =
{
mmc_request,
mmc_set_iocfg,
mmc_get_card_status,
mmc_enable_sdio_irq
};
int s3c_sdio_init(void)
{
struct rt_mmcsd_host * host = RT_NULL;
host = mmcsd_alloc_host();
if (!host)
{
goto err;
}
host->ops = &ops;
host->freq_min = 300000;
host->freq_max = 50000000;
host->valid_ocr = VDD_32_33 | VDD_33_34;
host->flags = MMCSD_MUTBLKWRITE | MMCSD_SUP_HIGHSPEED | MMCSD_SUP_SDIO_IRQ | MMCSD_BUSWIDTH_4;
host->max_seg_size = 2048;
host->max_dma_segs = 10;
host->max_blk_size = 512;
host->max_blk_count = 4096;
mmcsd_change(host);
return RT_EOK;
err:
if(host) rt_free(host);
return -RT_EIO;
}
INIT_DEVICE_EXPORT(s3c_sdio_init);