143 lines
5.3 KiB
Markdown
143 lines
5.3 KiB
Markdown
# EK-RA8D1 BSP Instruction
|
||
|
||
中文|[English](README.md)
|
||
|
||
## Introduction
|
||
|
||
Prepare for an exhilarating journey into the realm of the EK-RA8D1 development board! This guide is your treasure map, leading you to a trove of knowledge about the Board Support Package (BSP). The Quick Start section is your launchpad, propelling developers into action with the BSP, and getting RT-Thread operational on the development board faster than a speeding bullet.
|
||
|
||
Here’s a sneak peek of the adventure that awaits:
|
||
|
||
• A captivating exploration of the development board
|
||
|
||
• A practical and user-friendly BSP Quick Start Guide
|
||
|
||
## Hardware
|
||
|
||
The EK-RA8D1 evaluation board, developed based on the Renesas RA8D1 MCU, is a handy tool that allows users to easily evaluate the features of the RA8 MCU group. With flexible software package and IDE configurations, it’s a breeze to develop embedded system applications.
|
||
|
||
Here’s a sneak peek of what the front of the development board looks like:
|
||
|
||
|
||
|
||
The board comes with some commonly used **on-board resources**. Let’s dive in and explore!
|
||
|
||
- MCU：R7FA8D1BH, 480MHz, **Arm®Cortex®-M85**, 2MB Flash, 1MB SRAM
|
||
- Jlink OB
|
||
- OSPI FLASH（64MX8）
|
||
- USB-Host
|
||
- USB-Device
|
||
- CANFD
|
||
- ethernet
|
||
- 2个PMOD+Arduino+micro BUS interface
|
||
- 3 user LED
|
||
- 3 button: 2 user button, 1 reset button
|
||
|
||
**More Details**
|
||
|
||
### Peripheral Condition
|
||
|
||
Each peripheral supporting condition for this BSP is as follows:
|
||
|
||
| **On-chip Peripheral Drivers** | **Support** | **Remark** |
|
||
| :----------------: | :----------------: | :------------- |
|
||
| UART | Support | UART9 is the default log output port. |
|
||
| GPIO | Support | |
|
||
| USB | Support | TinyUSB |
|
||
| Camera | Support | ov2640、ov7725、ov7670... |
|
||
| SDHC | Support | 1bit、4bit |
|
||
| ADC | Support | |
|
||
| DAC | Support | |
|
||
| SPI | Support | |
|
||
| PWM | Support | |
|
||
| RTC | Support | |
|
||
| FLASH | Support | On board flash |
|
||
| WDT | Support | |
|
||
| IIC | Support | |
|
||
|
||
## Instructions for Use
|
||
|
||
The instructions for use are divided into the following two sections:
|
||
|
||
• Quick Start
|
||
|
||
This section is a user guide for newcomers to RT-Thread. By following simple steps, you can run the RT-Thread operating system on this development board and see the experimental results.
|
||
|
||
• Advanced Use
|
||
|
||
This section is for developers who want to enable more development board resources on the RT-Thread operating system. By using the ENV tool to configure the BSP, you can enable more on-board resources and achieve more advanced functions.
|
||
|
||
### Quick Start
|
||
|
||
This BSP currently only provides an MDK5 project. The following tutorial takes the MDK5 development environment as an example to introduce how to run the system.
|
||
|
||
**Compile and Download**
|
||
|
||
• Compile: Double-click the **project.uvprojx** file to open the MDK5 project and compile the program.
|
||
|
||
• Download: Click the Debug button in MDK to download and debug
|
||
|
||
**Running results**
|
||
|
||
After the program is downloaded successfully, the system will automatically run and print system information.
|
||
|
||
Connect the corresponding serial port of the development board to the PC, open the corresponding serial port (115200-8-1-N) in the terminal tool, reset the device, and you can see RT-Thread’s output information. Enter the help command can view the commands supported by the system.
|
||
|
||
```bash
|
||
initialize rti_board_start:0 done
|
||
|
||
\ | /
|
||
- RT - Thread Operating System
|
||
/ | \ 5.1.0 build Oct 30 2023 16:14:05
|
||
2006 - 2022 Copyright by RT-Thread team
|
||
do components initialization.
|
||
initialize rti_board_end:0 done
|
||
initialize finsh_system_init:0 done
|
||
|
||
Hello RT-Thread!
|
||
msh >
|
||
```
|
||
|
||
**Entry function**
|
||
|
||
The entry function of the application layer is in **bsp\renesas\ra8d1-ek\src\hal_entry.c** in `void hal_entry(void)`. Source files that you created can be placed directly in the src directory.
|
||
|
||
```c
|
||
void hal_entry(void)
|
||
{
|
||
rt_kprintf("\nHello RT-Thread!\n");
|
||
|
||
while (1)
|
||
{
|
||
rt_pin_write(LED_PIN, PIN_HIGH);
|
||
rt_thread_mdelay(500);
|
||
rt_pin_write(LED_PIN, PIN_LOW);
|
||
rt_thread_mdelay(500);
|
||
}
|
||
}
|
||
```
|
||
|
||
### Advanced Features
|
||
|
||
**Resources & Documents**
|
||
|
||
- [Development Board Overview](https://www.renesas.com/us/en/products/microcontrollers-microprocessors/ra-cortex-m-mcus/ek-ra8d1-evaluation-kit-ra8d1-mcu-group#documents)
|
||
- [User Guide](https://www.renesas.com/us/en/document/mat/ek-ra8d1-v1-users-manual?r=25452351)
|
||
- [RA MCU](https://www.renesas.com/us/en/document/gde/1520091)
|
||
|
||
**ENV Configuration**
|
||
|
||
• How to use the ENV tool: [RT-Thread env tool user manual](https://www.rt-thread.io/document/site/programming-manual/env/env/).
|
||
|
||
This BSP only enables the function of UART9 by default. If you're looking for more advanced functions such as components and software packages, ENV tool for configuration is available.
|
||
|
||
The steps are as follows:
|
||
|
||
1. Open the env tool under bsp.
|
||
2. Enter the `menuconfig` command to configure the project, and save and exit after configuration.
|
||
3. Enter the `pkgs --update` command to update the software package.
|
||
4. Enter the `scons --target=mdk5` command to regenerate the project.
|
||
|
||
## Contribute the Code
|
||
|
||
If you’re interested in the EK-RA8D1 and have some cool projects you’d like to share with everyone, we’d love for you to contribute your code! You can check out [how to contribute to RT-Thread’s code](https://www.rt-thread.io/contribution.html). Let’s make something awesome together! |