278 lines
8.2 KiB
Plaintext
278 lines
8.2 KiB
Plaintext
#! armclang -E --target=arm-arm-none-eabi -x c -mcpu=cortex-m4
|
|
; The first line specifies a preprocessor command that the linker invokes
|
|
; to pass a scatter file through a C preprocessor.
|
|
|
|
;*******************************************************************************
|
|
;* \file cy8c6xx7_cm4_dual.sct
|
|
;* \version 2.91
|
|
;*
|
|
;* Linker file for the ARMCC.
|
|
;*
|
|
;* The main purpose of the linker script is to describe how the sections in the
|
|
;* input files should be mapped into the output file, and to control the memory
|
|
;* layout of the output file.
|
|
;*
|
|
;* \note The entry point location is fixed and starts at 0x10000000. The valid
|
|
;* application image should be placed there.
|
|
;*
|
|
;* \note The linker files included with the PDL template projects must be
|
|
;* generic and handle all common use cases. Your project may not use every
|
|
;* section defined in the linker files. In that case you may see the warnings
|
|
;* during the build process: L6314W (no section matches pattern) and/or L6329W
|
|
;* (pattern only matches removed unused sections). In your project, you can
|
|
;* suppress the warning by passing the "--diag_suppress=L6314W,L6329W" option to
|
|
;* the linker, simply comment out or remove the relevant code in the linker
|
|
;* file.
|
|
;*
|
|
;*******************************************************************************
|
|
;* \copyright
|
|
;* Copyright 2016-2021 Cypress Semiconductor Corporation
|
|
;* SPDX-License-Identifier: Apache-2.0
|
|
;*
|
|
;* Licensed under the Apache License, Version 2.0 (the "License");
|
|
;* you may not use this file except in compliance with the License.
|
|
;* You may obtain a copy of the License at
|
|
;*
|
|
;* http://www.apache.org/licenses/LICENSE-2.0
|
|
;*
|
|
;* Unless required by applicable law or agreed to in writing, software
|
|
;* distributed under the License is distributed on an "AS IS" BASIS,
|
|
;* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
|
|
;* See the License for the specific language governing permissions and
|
|
;* limitations under the License.
|
|
;******************************************************************************/
|
|
|
|
; The defines below describe the location and size of blocks of memory in the target.
|
|
; Use these defines to specify the memory regions available for allocation.
|
|
|
|
; The following defines control RAM and flash memory allocation for the CM4 core.
|
|
; You can change the memory allocation by editing RAM and Flash defines.
|
|
; Note that 2 KB of RAM (at the end of the SRAM) are reserved for system use.
|
|
; Using this memory region for other purposes will lead to unexpected behavior.
|
|
; Your changes must be aligned with the corresponding defines for CM0+ core in 'xx_cm0plus.scat',
|
|
; where 'xx' is the device group; for example, 'cy8c6xx7_cm0plus.scat'.
|
|
; RAM
|
|
#define RAM_START 0x08002000
|
|
#define RAM_SIZE 0x00045800
|
|
; Flash
|
|
#define FLASH_START 0x10000000
|
|
#define FLASH_SIZE 0x00100000
|
|
|
|
; The size of the stack section at the end of CM4 SRAM
|
|
#define STACK_SIZE 0x00001000
|
|
|
|
; By default, the COMPONENT_CM0P_SLEEP prebuilt image is used for the CM0p core.
|
|
; More about CM0+ prebuilt images, see here:
|
|
; https://github.com/cypresssemiconductorco/psoc6cm0p
|
|
; The size of the Cortex-M0+ application flash image
|
|
#define FLASH_CM0P_SIZE 0x2000
|
|
|
|
; The following defines describe a 32K flash region used for EEPROM emulation.
|
|
; This region can also be used as the general purpose flash.
|
|
; You can assign sections to this memory region for only one of the cores.
|
|
; Note some middleware (e.g. BLE, Emulated EEPROM) can place their data into this memory region.
|
|
; Therefore, repurposing this memory region will prevent such middleware from operation.
|
|
#define EM_EEPROM_START 0x14000000
|
|
#define EM_EEPROM_SIZE 0x8000
|
|
|
|
; The following defines describe device specific memory regions and must not be changed.
|
|
; Supervisory flash: User data
|
|
#define SFLASH_USER_DATA_START 0x16000800
|
|
#define SFLASH_USER_DATA_SIZE 0x00000800
|
|
|
|
; Supervisory flash: Normal Access Restrictions (NAR)
|
|
#define SFLASH_NAR_START 0x16001A00
|
|
#define SFLASH_NAR_SIZE 0x00000200
|
|
|
|
; Supervisory flash: Public Key
|
|
#define SFLASH_PUBLIC_KEY_START 0x16005A00
|
|
#define SFLASH_PUBLIC_KEY_SIZE 0x00000C00
|
|
|
|
; Supervisory flash: Table of Content # 2
|
|
#define SFLASH_TOC_2_START 0x16007C00
|
|
#define SFLASH_TOC_2_SIZE 0x00000200
|
|
|
|
; Supervisory flash: Table of Content # 2 Copy
|
|
#define SFLASH_RTOC_2_START 0x16007E00
|
|
#define SFLASH_RTOC_2_SIZE 0x00000200
|
|
|
|
; External memory
|
|
#define XIP_START 0x18000000
|
|
#define XIP_SIZE 0x08000000
|
|
|
|
; eFuse
|
|
#define EFUSE_START 0x90700000
|
|
#define EFUSE_SIZE 0x100000
|
|
|
|
|
|
; Cortex-M0+ application flash image area
|
|
LR_IROM FLASH_START FLASH_CM0P_SIZE
|
|
{
|
|
.cy_m0p_image +0 FLASH_CM0P_SIZE
|
|
{
|
|
* (.cy_m0p_image)
|
|
}
|
|
}
|
|
|
|
; Cortex-M4 application flash area
|
|
LR_IROM1 (FLASH_START + FLASH_CM0P_SIZE) (FLASH_SIZE - FLASH_CM0P_SIZE)
|
|
{
|
|
ER_FLASH_VECTORS +0
|
|
{
|
|
* (RESET, +FIRST)
|
|
}
|
|
|
|
ER_FLASH_CODE +0 FIXED
|
|
{
|
|
* (InRoot$$Sections)
|
|
* (+RO)
|
|
}
|
|
|
|
ER_RAM_VECTORS RAM_START UNINIT
|
|
{
|
|
* (RESET_RAM, +FIRST)
|
|
}
|
|
|
|
RW_RAM_DATA +0
|
|
{
|
|
* (.cy_ramfunc)
|
|
* (+RW, +ZI)
|
|
}
|
|
|
|
; Place variables in the section that should not be initialized during the
|
|
; device startup.
|
|
RW_IRAM1 +0 UNINIT
|
|
{
|
|
* (.noinit)
|
|
}
|
|
|
|
; Application heap area (HEAP)
|
|
ARM_LIB_HEAP +0 EMPTY ((RAM_START+RAM_SIZE)-AlignExpr(ImageLimit(RW_IRAM1), 8)-STACK_SIZE)
|
|
{
|
|
}
|
|
|
|
; Stack region growing down
|
|
ARM_LIB_STACK (RAM_START+RAM_SIZE) EMPTY -STACK_SIZE
|
|
{
|
|
}
|
|
|
|
; Used for the digital signature of the secure application and the
|
|
; Bootloader SDK application. The size of the section depends on the required
|
|
; data size.
|
|
.cy_app_signature (FLASH_START + FLASH_SIZE - 256) 256
|
|
{
|
|
* (.cy_app_signature)
|
|
}
|
|
}
|
|
|
|
|
|
; Emulated EEPROM Flash area
|
|
LR_EM_EEPROM EM_EEPROM_START EM_EEPROM_SIZE
|
|
{
|
|
.cy_em_eeprom +0
|
|
{
|
|
* (.cy_em_eeprom)
|
|
}
|
|
}
|
|
|
|
; Supervisory flash: User data
|
|
LR_SFLASH_USER_DATA SFLASH_USER_DATA_START SFLASH_USER_DATA_SIZE
|
|
{
|
|
.cy_sflash_user_data +0
|
|
{
|
|
* (.cy_sflash_user_data)
|
|
}
|
|
}
|
|
|
|
; Supervisory flash: Normal Access Restrictions (NAR)
|
|
LR_SFLASH_NAR SFLASH_NAR_START SFLASH_NAR_SIZE
|
|
{
|
|
.cy_sflash_nar +0
|
|
{
|
|
* (.cy_sflash_nar)
|
|
}
|
|
}
|
|
|
|
; Supervisory flash: Public Key
|
|
LR_SFLASH_PUBLIC_KEY SFLASH_PUBLIC_KEY_START SFLASH_PUBLIC_KEY_SIZE
|
|
{
|
|
.cy_sflash_public_key +0
|
|
{
|
|
* (.cy_sflash_public_key)
|
|
}
|
|
}
|
|
|
|
; Supervisory flash: Table of Content # 2
|
|
LR_SFLASH_TOC_2 SFLASH_TOC_2_START SFLASH_TOC_2_SIZE
|
|
{
|
|
.cy_toc_part2 +0
|
|
{
|
|
* (.cy_toc_part2)
|
|
}
|
|
}
|
|
|
|
; Supervisory flash: Table of Content # 2 Copy
|
|
LR_SFLASH_RTOC_2 SFLASH_RTOC_2_START SFLASH_RTOC_2_SIZE
|
|
{
|
|
.cy_rtoc_part2 +0
|
|
{
|
|
* (.cy_rtoc_part2)
|
|
}
|
|
}
|
|
|
|
|
|
; Places the code in the Execute in Place (XIP) section. See the smif driver documentation for details.
|
|
LR_EROM XIP_START XIP_SIZE
|
|
{
|
|
cy_xip +0
|
|
{
|
|
* (.cy_xip)
|
|
}
|
|
}
|
|
|
|
|
|
; eFuse
|
|
LR_EFUSE EFUSE_START EFUSE_SIZE
|
|
{
|
|
.cy_efuse +0
|
|
{
|
|
* (.cy_efuse)
|
|
}
|
|
}
|
|
|
|
|
|
; The section is used for additional metadata (silicon revision, Silicon/JTAG ID, etc.) storage.
|
|
CYMETA 0x90500000
|
|
{
|
|
.cymeta +0 { * (.cymeta) }
|
|
}
|
|
|
|
/* The following symbols used by the cymcuelftool. */
|
|
/* Flash */
|
|
#define __cy_memory_0_start 0x10000000
|
|
#define __cy_memory_0_length 0x00100000
|
|
#define __cy_memory_0_row_size 0x200
|
|
|
|
/* Emulated EEPROM Flash area */
|
|
#define __cy_memory_1_start 0x14000000
|
|
#define __cy_memory_1_length 0x8000
|
|
#define __cy_memory_1_row_size 0x200
|
|
|
|
/* Supervisory Flash */
|
|
#define __cy_memory_2_start 0x16000000
|
|
#define __cy_memory_2_length 0x8000
|
|
#define __cy_memory_2_row_size 0x200
|
|
|
|
/* XIP */
|
|
#define __cy_memory_3_start 0x18000000
|
|
#define __cy_memory_3_length 0x08000000
|
|
#define __cy_memory_3_row_size 0x200
|
|
|
|
/* eFuse */
|
|
#define __cy_memory_4_start 0x90700000
|
|
#define __cy_memory_4_length 0x100000
|
|
#define __cy_memory_4_row_size 1
|
|
|
|
|
|
/* [] END OF FILE */
|