e455b18241 | ||
---|---|---|
.. | ||
applications | ||
driver | ||
.config | ||
Kconfig | ||
README.md | ||
README_ZH.md | ||
SConscript | ||
SConstruct | ||
link.lds | ||
link_stacksize.lds | ||
qemu-dbg.sh | ||
qemu-dumpdtb.sh | ||
qemu-nographic-smode.sh | ||
qemu-nographic.sh | ||
rtconfig.h | ||
rtconfig.py |
README.md
QEMU/RISCV64 VIRT BSP Introduction
中文页 | English
RISC-V is a free and open ISA enabling a new era of processor innovation through open standard collaboration. This project ported RT-Thread on QEMU RISCV64 VIRT machine.
1. Compiling
Download the cross compiler tool chain, it is recommended to use the sifive tool chain.
https://www.sifive.com/software
Select the fitting platform, we recommend Ubuntu.
Unzip the tool chain to the specified directory.
export RTT_EXEC_PATH=~/gcc/bin
Enter rt-thread/bsp/qemu-riscv-virt64
directory and input
scons
rtthread.elf
and rtthread .bin
files are generated.
2. Execution
The project provides two configurable operating modes for riscv64, defaults to run under M-Mode.
M-Mode
Firstly, install the qemu-system-riscv64
.
sudo apt install qemu-system-misc
Then enter
./qemu-nographic.sh
You'll see Project start running
heap: [0x80035804 - 0x86435804]
\ | /
- RT - Thread Operating System
/ | \ 4.0.4 build May 21 2021
2006 - 2021 Copyright by rt-thread team
Hello RISC-V!
msh />
S-Mode
When running in S-Mode, configuration is via menuconfig
scons --menuconfig
Select:
RISCV qemu virt64 configs --->
[*] RT-Thread run in riscv smode
Save it and compile scons
.
To get RT-Thread running in S-Mode, enable the opensbi, and then start up the RT-Thread through opensbi.
Compile qemu or downloaded premiere-version qemu that built-in opensbi, then executing ./qemu-nographic-smode.sh
can get it successfully running.
The qemu installed with sudo apt install qemu-system-misc
is an ordinary-version and may compile the opensbi on its own.
git clone git@github.com:riscv/opensbi.git
cd opensbi
make PLATFORM=generic CROSS_COMPILE=~/gcc/bin/riscv64-unknown-elf-
/build/platform/generic/firmware/fw_jump.elf
file is generated.
Enter the following command to run:
qemu-system-riscv64 -nographic -machine virt -m 256M -kernel rtthread.bin -bios ~/opensbi/build/platform/generic/firmware/fw_jump.elf
Result is shown as follows:
OpenSBI v0.9
____ _____ ____ _____
/ __ \ / ____| _ \_ _|
| | | |_ __ ___ _ __ | (___ | |_) || |
| | | | '_ \ / _ \ '_ \ \___ \| _ < | |
| |__| | |_) | __/ | | |____) | |_) || |_
\____/| .__/ \___|_| |_|_____/|____/_____|
| |
|_|
Platform Name : riscv-virtio,qemu
Platform Features : timer,mfdeleg
.
.
.
Boot HART ISA : rv64imafdcsu
Boot HART Features : scounteren,mcounteren
Boot HART PMP Count : 16
Boot HART PMP Granularity : 4
Boot HART PMP Address Bits: 54
Boot HART MHPM Count : 0
Boot HART MHPM Count : 0
Boot HART MIDELEG : 0x0000000000000222
Boot HART MEDELEG : 0x000000000000b109
heap: [0x80235a58 - 0x86635a58]
\ | /
- RT - Thread Operating System
/ | \ 4.0.4 build May 21 2021
2006 - 2021 Copyright by rt-thread team
Hello RISC-V!
msh />
3. Condition
Driver | Condition | Remark |
---|---|---|
UART | Support | UART0 |
PLIC | Support | - |
CLIC | Support | - |