453 lines
10 KiB
C
453 lines
10 KiB
C
/*
|
|
* File : serial.c
|
|
* This file is part of RT-Thread RTOS
|
|
* COPYRIGHT (C) 2013, RT-Thread Development Team
|
|
*
|
|
* The license and distribution terms for this file may be
|
|
* found in the file LICENSE in this distribution or at
|
|
* http://www.rt-thread.org/license/LICENSE
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2013-07-06 Bernard the first version
|
|
* 2014-01-11 RTsien support UART0 to UART5 straightly
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
|
|
#include <am33xx.h>
|
|
#include <interrupt.h>
|
|
#include "uart.h"
|
|
#include "uart_reg.h"
|
|
|
|
struct am33xx_uart
|
|
{
|
|
unsigned long base;
|
|
int irq;
|
|
};
|
|
|
|
static void am33xx_uart_isr(int irqno, void* param)
|
|
{
|
|
rt_uint32_t iir;
|
|
struct am33xx_uart* uart;
|
|
struct rt_serial_device *serial;
|
|
|
|
serial = (struct rt_serial_device*)param;
|
|
uart = (struct am33xx_uart *)serial->parent.user_data;
|
|
|
|
iir = UART_IIR_REG(uart->base);
|
|
|
|
if ((iir & (0x02 << 1)) || (iir & (0x6 << 1)))
|
|
{
|
|
rt_hw_serial_isr(serial, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
}
|
|
|
|
#define NOT_IMPLEMENTED() RT_ASSERT(0)
|
|
|
|
static rt_err_t am33xx_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct am33xx_uart* uart;
|
|
unsigned long base;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct am33xx_uart *)serial->parent.user_data;
|
|
RT_ASSERT(uart);
|
|
base = uart->base;
|
|
|
|
#define __LCR UART_LCR_REG(base)
|
|
|
|
if (cfg->data_bits == DATA_BITS_8)
|
|
__LCR |= 3;
|
|
else
|
|
NOT_IMPLEMENTED();
|
|
|
|
if (cfg->stop_bits == STOP_BITS_1)
|
|
__LCR &= ~(1<<2);
|
|
else
|
|
__LCR |= (1<<2);
|
|
|
|
if (cfg->parity == PARITY_NONE)
|
|
__LCR &= ~(1<<3);
|
|
else
|
|
__LCR |= (1<<3);
|
|
|
|
__LCR |= (1<<7);
|
|
if (cfg->baud_rate == BAUD_RATE_115200)
|
|
{
|
|
UART_DLL_REG(base) = 26;
|
|
UART_DLH_REG(base) = 0;
|
|
}
|
|
else if (cfg->baud_rate == BAUD_RATE_9600)
|
|
{
|
|
UART_DLL_REG(base) = 0x38;
|
|
UART_DLH_REG(base) = 1;
|
|
}
|
|
else
|
|
{
|
|
NOT_IMPLEMENTED();
|
|
}
|
|
__LCR &= ~(1<<7);
|
|
|
|
UART_MDR1_REG(base) = 0;
|
|
UART_MDR2_REG(base) = 0;
|
|
|
|
#undef __LCR
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t am33xx_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct am33xx_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct am33xx_uart *)serial->parent.user_data;
|
|
|
|
switch (cmd)
|
|
{
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
/* disable rx irq */
|
|
rt_hw_interrupt_mask(uart->irq);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
/* enable rx irq */
|
|
rt_hw_interrupt_umask(uart->irq);
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
int printkc(char c)
|
|
{
|
|
int base = 0xf9e09000;
|
|
|
|
while (!(UART_LSR_REG(base) & 0x20));
|
|
UART_THR_REG(base) = c;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int am33xx_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct am33xx_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct am33xx_uart *)serial->parent.user_data;
|
|
|
|
while (!(UART_LSR_REG(uart->base) & 0x20));
|
|
UART_THR_REG(uart->base) = c;
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int am33xx_getc(struct rt_serial_device *serial)
|
|
{
|
|
int ch;
|
|
struct am33xx_uart* uart;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = (struct am33xx_uart *)serial->parent.user_data;
|
|
|
|
ch = -1;
|
|
if (UART_LSR_REG(uart->base) & 0x01)
|
|
{
|
|
ch = UART_RHR_REG(uart->base) & 0xff;
|
|
}
|
|
|
|
return ch;
|
|
}
|
|
|
|
static const struct rt_uart_ops am33xx_uart_ops =
|
|
{
|
|
am33xx_configure,
|
|
am33xx_control,
|
|
am33xx_putc,
|
|
am33xx_getc,
|
|
};
|
|
|
|
/* UART device driver structure */
|
|
#ifdef RT_USING_UART0
|
|
struct am33xx_uart uart0 =
|
|
{
|
|
UART0_BASE,
|
|
UART0_INT,
|
|
};
|
|
struct rt_serial_device serial0;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART1
|
|
struct am33xx_uart uart1 =
|
|
{
|
|
UART1_BASE,
|
|
UART1_INT,
|
|
};
|
|
struct rt_serial_device serial1;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
struct am33xx_uart uart2 =
|
|
{
|
|
UART2_BASE,
|
|
UART2_INT,
|
|
};
|
|
struct rt_serial_device serial2;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
struct am33xx_uart uart3 =
|
|
{
|
|
UART3_BASE,
|
|
UART3_INT,
|
|
};
|
|
struct rt_serial_device serial3;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
struct am33xx_uart uart4 =
|
|
{
|
|
UART4_BASE,
|
|
UART4_INT,
|
|
};
|
|
struct rt_serial_device serial4;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
struct am33xx_uart uart5 =
|
|
{
|
|
UART5_BASE,
|
|
UART5_INT,
|
|
};
|
|
struct rt_serial_device serial5;
|
|
#endif
|
|
|
|
#define write_reg(base, value) *(int*)(base) = value
|
|
#define read_reg(base) *(int*)(base)
|
|
|
|
#define PRM_PER_INTRANSLATION (1 << 20)
|
|
#define PRM_PER_POWSTATEOFF (0)
|
|
#define PRM_PER_PERMEMSTATEOFF (0)
|
|
|
|
static void poweron_per_domain(void)
|
|
{
|
|
unsigned long prcm_base;
|
|
unsigned long prm_state;
|
|
|
|
prcm_base = AM33XX_PRCM_REGS;
|
|
|
|
/* wait for ongoing translations */
|
|
for (prm_state = PRM_PER_PWRSTST_REG(prcm_base);
|
|
prm_state & PRM_PER_INTRANSLATION;
|
|
prm_state = PRM_PER_PWRSTST_REG(prcm_base))
|
|
;
|
|
|
|
/* check power state */
|
|
if ((prm_state & 0x03) == PRM_PER_POWSTATEOFF)
|
|
/* power on PER domain */
|
|
PRM_PER_PWRSTCTRL_REG(prcm_base) |= 0x3;
|
|
|
|
/* check per mem state */
|
|
if ((prm_state & 0x03) == PRM_PER_PERMEMSTATEOFF)
|
|
/* power on PER domain */
|
|
PRM_PER_PWRSTCTRL_REG(prcm_base) |= 0x3 << 25;
|
|
|
|
while (PRM_PER_PWRSTST_REG(prcm_base) & PRM_PER_INTRANSLATION)
|
|
;
|
|
}
|
|
|
|
static void start_uart_clk(void)
|
|
{
|
|
unsigned long prcm_base;
|
|
|
|
prcm_base = AM33XX_PRCM_REGS;
|
|
|
|
/* software forced wakeup */
|
|
CM_PER_L4LS_CLKSTCTRL_REG(prcm_base) |= 0x2;
|
|
|
|
/* Waiting for the L4LS clock */
|
|
while (!(CM_PER_L4LS_CLKSTCTRL_REG(prcm_base) & (1<<8)))
|
|
;
|
|
|
|
/* enable uart1 */
|
|
#ifdef RT_USING_UART1
|
|
CM_PER_UART1_CLKCTRL_REG(prcm_base) |= 0x2;
|
|
/* wait for uart1 clk */
|
|
while ((CM_PER_UART1_CLKCTRL_REG(prcm_base) & (0x3<<16)) != 0)
|
|
;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
CM_PER_UART2_CLKCTRL_REG(prcm_base) |= 0x2;
|
|
/* wait for uart2 clk */
|
|
while ((CM_PER_UART2_CLKCTRL_REG(prcm_base) & (0x3<<16)) != 0)
|
|
;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
CM_PER_UART3_CLKCTRL_REG(prcm_base) |= 0x2;
|
|
/* wait for uart3 clk */
|
|
while ((CM_PER_UART3_CLKCTRL_REG(prcm_base) & (0x3<<16)) != 0)
|
|
;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
CM_PER_UART4_CLKCTRL_REG(prcm_base) |= 0x2;
|
|
/* wait for uart4 clk */
|
|
while ((CM_PER_UART4_CLKCTRL_REG(prcm_base) & (0x3<<16)) != 0)
|
|
;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
CM_PER_UART5_CLKCTRL_REG(prcm_base) |= 0x2;
|
|
/* wait for uart5 clk */
|
|
while ((CM_PER_UART5_CLKCTRL_REG(prcm_base) & (0x3<<16)) != 0)
|
|
;
|
|
#endif
|
|
|
|
/* Waiting for the L4LS UART clock */
|
|
while (!(CM_PER_L4LS_CLKSTCTRL_REG(prcm_base) & (1<<10)))
|
|
;
|
|
}
|
|
|
|
static void config_pinmux(void)
|
|
{
|
|
unsigned long ctlm_base;
|
|
|
|
ctlm_base = AM33XX_CTLM_REGS;
|
|
|
|
/* make sure the pin mux is OK for uart */
|
|
#ifdef RT_USING_UART1
|
|
REG32(ctlm_base + 0x800 + 0x180) = 0x20;
|
|
REG32(ctlm_base + 0x800 + 0x184) = 0x00;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
REG32(ctlm_base + 0x800 + 0x150) = 0x20;
|
|
REG32(ctlm_base + 0x800 + 0x154) = 0x00;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
REG32(ctlm_base + 0x800 + 0x164) = 0x01;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
REG32(ctlm_base + 0x800 + 0x070) = 0x26;
|
|
REG32(ctlm_base + 0x800 + 0x074) = 0x06;
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
REG32(ctlm_base + 0x800 + 0x0C4) = 0x24;
|
|
REG32(ctlm_base + 0x800 + 0x0C0) = 0x04;
|
|
#endif
|
|
}
|
|
|
|
int rt_hw_serial_init(void)
|
|
{
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
poweron_per_domain();
|
|
start_uart_clk();
|
|
config_pinmux();
|
|
|
|
#ifdef RT_USING_UART0
|
|
serial0.ops = &am33xx_uart_ops;
|
|
serial0.config = config;
|
|
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart0.base) = 0x01;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart0.irq, am33xx_uart_isr, &serial0, "uart0");
|
|
rt_hw_interrupt_control(uart0.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart0.irq);
|
|
/* register UART0 device */
|
|
rt_hw_serial_register(&serial0, "uart0",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart0);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART1
|
|
serial1.ops = &am33xx_uart_ops;
|
|
serial1.config = config;
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart1.base) = 0x01;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart1.irq, am33xx_uart_isr, &serial1, "uart1");
|
|
rt_hw_interrupt_control(uart1.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart1.irq);
|
|
/* register UART0 device */
|
|
rt_hw_serial_register(&serial1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart1);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART2
|
|
serial2.ops = &am33xx_uart_ops;
|
|
serial2.config = config;
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart2.base) = 0x01;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart2.irq, am33xx_uart_isr, &serial2, "uart2");
|
|
rt_hw_interrupt_control(uart2.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart2.irq);
|
|
/* register UART2 device */
|
|
rt_hw_serial_register(&serial2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart2);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART3
|
|
serial3.ops = &am33xx_uart_ops;
|
|
serial3.config = config;
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart3.base) = 0x01;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart3.irq, am33xx_uart_isr, &serial3, "uart3");
|
|
rt_hw_interrupt_control(uart3.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart3.irq);
|
|
/* register UART3 device */
|
|
rt_hw_serial_register(&serial3, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart3);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART4
|
|
/* use 9600bps for GDB stub. */
|
|
config.baud_rate = BAUD_RATE_9600;
|
|
|
|
serial4.ops = &am33xx_uart_ops;
|
|
serial4.config = config;
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart4.base) = 0x00;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart4.irq, am33xx_uart_isr, &serial4, "uart4");
|
|
rt_hw_interrupt_control(uart4.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart4.irq);
|
|
/* register UART4 device */
|
|
rt_hw_serial_register(&serial4, "uart4",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart4);
|
|
#endif
|
|
|
|
#ifdef RT_USING_UART5
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
|
|
serial5.ops = &am33xx_uart_ops;
|
|
serial5.config = config;
|
|
/* enable RX interrupt */
|
|
UART_IER_REG(uart5.base) = 0x01;
|
|
/* install ISR */
|
|
rt_hw_interrupt_install(uart5.irq, am33xx_uart_isr, &serial5, "uart5");
|
|
rt_hw_interrupt_control(uart5.irq, 0, 0);
|
|
rt_hw_interrupt_mask(uart5.irq);
|
|
/* register UART4 device */
|
|
rt_hw_serial_register(&serial5, "uart5",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart5);
|
|
#endif
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_serial_init);
|