rt-thread/bsp/hc32l196/Libraries/HC32L196_StdPeriph_Driver/inc/hc32l196_dac.h

235 lines
8.6 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/******************************************************************************
* Copyright (C) 2019, Huada Semiconductor Co.,Ltd All rights reserved.
*
* This software is owned and published by:
* Huada Semiconductor Co.,Ltd ("HDSC").
*
* BY DOWNLOADING, INSTALLING OR USING THIS SOFTWARE, YOU AGREE TO BE BOUND
* BY ALL THE TERMS AND CONDITIONS OF THIS AGREEMENT.
*
* This software contains source code for use with HDSC
* components. This software is licensed by HDSC to be adapted only
* for use in systems utilizing HDSC components. HDSC shall not be
* responsible for misuse or illegal use of this software for devices not
* supported herein. HDSC is providing this software "AS IS" and will
* not be responsible for issues arising from incorrect user implementation
* of the software.
*
* Disclaimer:
* HDSC MAKES NO WARRANTY, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE,
* REGARDING THE SOFTWARE (INCLUDING ANY ACOOMPANYING WRITTEN MATERIALS),
* ITS PERFORMANCE OR SUITABILITY FOR YOUR INTENDED USE, INCLUDING,
* WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY, THE IMPLIED
* WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR USE, AND THE IMPLIED
* WARRANTY OF NONINFRINGEMENT.
* HDSC SHALL HAVE NO LIABILITY (WHETHER IN CONTRACT, WARRANTY, TORT,
* NEGLIGENCE OR OTHERWISE) FOR ANY DAMAGES WHATSOEVER (INCLUDING, WITHOUT
* LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,
* LOSS OF BUSINESS INFORMATION, OR OTHER PECUNIARY LOSS) ARISING FROM USE OR
* INABILITY TO USE THE SOFTWARE, INCLUDING, WITHOUT LIMITATION, ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR LOSS OF DATA,
* SAVINGS OR PROFITS,
* EVEN IF Disclaimer HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
* YOU ASSUME ALL RESPONSIBILITIES FOR SELECTION OF THE SOFTWARE TO ACHIEVE YOUR
* INTENDED RESULTS, AND FOR THE INSTALLATION OF, USE OF, AND RESULTS OBTAINED
* FROM, THE SOFTWARE.
*
* This software may be replicated in part or whole for the licensed use,
* with the restriction that this Disclaimer and Copyright notice must be
* included with each copy of this software, whether used in part or whole,
* at all times.
*/
/******************************************************************************/
/** \file dac.h
**
** Header file for dac Converter functions
** @link DAC Group Some description @endlink
**
** - 2019-04-10 First Version
**
******************************************************************************/
#ifndef __DAC_H__
#define __DAC_H__
/******************************************************************************/
/* Include files */
/******************************************************************************/
#include "ddl.h"
/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern "C"
{
#endif
/**
******************************************************************************
** \brief 使能或者禁止指令
******************************************************************************/
typedef enum
{
DacDisable = 0u, //禁止
DacEnable = 1u //使能
}en_en_state_t;
/**
******************************************************************************
** \brief 使能或者禁止DAC0通道输出缓冲器 DAC_CR0BOFF0
******************************************************************************/
typedef enum
{
DacBoffDisable = 1u,
DacBoffEnable = 0u
}en_dac_boff_t;
/**
******************************************************************************
** \brief 使能或者禁止DAC0通道触发使能 DAC_CR0: TEN0
******************************************************************************/
typedef enum
{
DacTenDisable = 0u,
DacTenEnable = 1u
}en_dac_ten_t;
/**
******************************************************************************
** \brief DAC0通道触发选择 DAC_CR0: TSEL0
******************************************************************************/
typedef enum
{
DacTim0Tradc = 0u, //TIM0_TRADC触发
DacTim1Tradc = 1u, //TIM1_TRADC触发
DacTim2Tradc = 2u, //TIM2_TRADC触发
DacTim3Tradc = 3u, //TIM3_TRADC触发
DacTim4Tradc = 4u, //TIM4_TRADC触发
DacTim5Tradc = 5u, //TIM5_TRADC触发
DacSwTriger = 6u, //软件触发
DacExPortTriger = 7u //外部端口触发
}en_dac_tsel_t;
/**
******************************************************************************
** \brief DAC0通道噪声/三角波生产使能或禁止 DAC_CR0: WAVE0
******************************************************************************/
typedef enum
{
DacWaveDisable = 0u, //禁止生产波
DacNoiseEnable = 1u, //使能生成噪声波
DacTrWaveEnable = 2u //使能生产三角波
}en_dac_wave_t;
/**
******************************************************************************
** \brief DACx通道掩码/振幅选择器 DAC_CR0: MAMP0 & MAMP1
******************************************************************************/
typedef enum
{
DacMemp01 = 0u,
DacMenp03 = 1u,
DacMenp07 = 2u,
DacMenp15 = 3u,
DacMenp31 = 4u,
DacMenp63 = 5u,
DacMenp127 = 6u,
DacMenp255 = 7u,
DacMenp511 = 8u,
DacMenp1023 = 9u,
DacMenp2047 = 10u,
DacMenp4095 = 11u
}en_dac_mamp_t;
/**
******************************************************************************
** \brief DACx通道DMA使能或禁止 DAC_CR0: DMAEN0 & DMAEN1
******************************************************************************/
/**
******************************************************************************
** \brief DACx通道DMA下溢中断使能或禁止 DAC_CR0: DMAUDRIE0 & DMAUDRIE1
******************************************************************************/
/**
******************************************************************************
** \brief DACx参考电压选择 DAC_CR0: SREF0 & SREF1
******************************************************************************/
typedef enum
{
DacVoltage1V5 = 0u, //内部1.5V
DacVoltage2V5 = 1u, //内部2.5V
DacVoltageExRef = 2u, //外部参考电压ExRef(PB01)
DacVoltageAvcc = 3u //AVCC电压
}en_dac_sref_t;
/**
******************************************************************************
** \brief DACx触发选择寄存器DAC_ETRS DAC_ETRS
******************************************************************************/
typedef enum
{
DacPortTrigPA9 = 0u, //触发端口为PA9
DacPortTrigPB9 = 1u, //触发端口为PB9
DacPortTrigPC9 = 2u, //触发端口为PC9
DacPortTrigPD9 = 3u, //触发端口为PD9
DacPortTrigPE9 = 4u, //触发端口为PE9
DacPortTrigPF9 = 5u //触发端口为PF9
}en_port_trig_t;
/**
******************************************************************************
** \brief 对齐方式
******************************************************************************/
typedef enum
{
DacRightAlign = 0u, //右对齐
DacLeftAlign = 1u //左对齐
}en_align_t;
/**
******************************************************************************
** \brief 数据位数
******************************************************************************/
typedef enum
{
DacBit8 = 0u, //8位
DacBit12 = 1u //12位
}en_bitno_t;
/**
******************************************************************************
** \brief 初始化配置结构体
******************************************************************************/
typedef struct
{
en_dac_boff_t boff_t;
en_dac_ten_t ten_t;
en_dac_tsel_t tsel_t;
en_dac_wave_t wave_t;
en_dac_mamp_t mamp_t;
en_dac_sref_t sref_t;
en_port_trig_t port_trig_t;
en_align_t align;
uint16_t dhr12;
uint8_t dhr8;
}stc_dac_cfg_t;
extern void Dac_DmaCmd(boolean_t NewState);
extern void Dac_DmaITCfg(boolean_t NewState);
extern boolean_t Dac_GetITStatus(void);
extern void Dac_Cmd(boolean_t NewState);
extern void Dac_SoftwareTriggerCmd(void);
extern void Dac_Init(stc_dac_cfg_t* DAC_InitStruct);
extern void Dac_SetChannelData(en_align_t DAC_Align, en_bitno_t DAC_Bit, uint16_t Data);
extern uint16_t Dac_GetDataOutputValue(void);
#ifdef __cplusplus
}
#endif
#endif //__DAC_H__
/******************************************************************************/
/* EOF (not truncated) */
/******************************************************************************/