366 lines
12 KiB
C
366 lines
12 KiB
C
/**
|
|
******************************************************************************
|
|
* @file system_stm32h7xx.c
|
|
* @author MCD Application Team
|
|
* @brief CMSIS Cortex-Mx Device Peripheral Access Layer System Source File.
|
|
*
|
|
* This file provides two functions and one global variable to be called from
|
|
* user application:
|
|
* - SystemInit(): This function is called at startup just after reset and
|
|
* before branch to main program. This call is made inside
|
|
* the "startup_stm32h7xx.s" file.
|
|
*
|
|
* - SystemCoreClock variable: Contains the core clock (HCLK), it can be used
|
|
* by the user application to setup the SysTick
|
|
* timer or configure other parameters.
|
|
*
|
|
* - SystemCoreClockUpdate(): Updates the variable SystemCoreClock and must
|
|
* be called whenever the core clock is changed
|
|
* during program execution.
|
|
*
|
|
*
|
|
******************************************************************************
|
|
* @attention
|
|
*
|
|
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
|
* All rights reserved.</center></h2>
|
|
*
|
|
* This software component is licensed by ST under BSD 3-Clause license,
|
|
* the "License"; You may not use this file except in compliance with the
|
|
* License. You may obtain a copy of the License at:
|
|
* opensource.org/licenses/BSD-3-Clause
|
|
*
|
|
******************************************************************************
|
|
*/
|
|
|
|
/** @addtogroup CMSIS
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup stm32h7xx_system
|
|
* @{
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_Includes
|
|
* @{
|
|
*/
|
|
|
|
#include "stm32h7xx.h"
|
|
#include <math.h>
|
|
#if !defined (HSE_VALUE)
|
|
#define HSE_VALUE ((uint32_t)25000000) /*!< Value of the External oscillator in Hz */
|
|
#endif /* HSE_VALUE */
|
|
|
|
#if !defined (CSI_VALUE)
|
|
#define CSI_VALUE ((uint32_t)4000000) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* CSI_VALUE */
|
|
|
|
#if !defined (HSI_VALUE)
|
|
#define HSI_VALUE ((uint32_t)64000000) /*!< Value of the Internal oscillator in Hz*/
|
|
#endif /* HSI_VALUE */
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_TypesDefinitions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_Defines
|
|
* @{
|
|
*/
|
|
|
|
/************************* Miscellaneous Configuration ************************/
|
|
/*!< Uncomment the following line if you need to use initialized data in D2 domain SRAM (AHB SRAM) */
|
|
/* #define DATA_IN_D2_SRAM */
|
|
|
|
/*!< Uncomment the following line if you need to relocate your vector Table in
|
|
Internal SRAM. */
|
|
/* #define VECT_TAB_SRAM */
|
|
#define VECT_TAB_OFFSET 0x00000000UL /*!< Vector Table base offset field.
|
|
This value must be a multiple of 0x200. */
|
|
/******************************************************************************/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_Macros
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_Variables
|
|
* @{
|
|
*/
|
|
/* This variable is updated in three ways:
|
|
1) by calling CMSIS function SystemCoreClockUpdate()
|
|
2) by calling HAL API function HAL_RCC_GetHCLKFreq()
|
|
3) each time HAL_RCC_ClockConfig() is called to configure the system clock frequency
|
|
Note: If you use this function to configure the system clock; then there
|
|
is no need to call the 2 first functions listed above, since SystemCoreClock
|
|
variable is updated automatically.
|
|
*/
|
|
uint32_t SystemCoreClock = 64000000;
|
|
uint32_t SystemD2Clock = 64000000;
|
|
const uint8_t D1CorePrescTable[16] = {0, 0, 0, 0, 1, 2, 3, 4, 1, 2, 3, 4, 6, 7, 8, 9};
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_FunctionPrototypes
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/** @addtogroup STM32H7xx_System_Private_Functions
|
|
* @{
|
|
*/
|
|
|
|
/**
|
|
* @brief Setup the microcontroller system
|
|
* Initialize the FPU setting and vector table location
|
|
* configuration.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemInit (void)
|
|
{
|
|
#if defined (DATA_IN_D2_SRAM)
|
|
__IO uint32_t tmpreg;
|
|
#endif /* DATA_IN_D2_SRAM */
|
|
|
|
/* FPU settings ------------------------------------------------------------*/
|
|
#if (__FPU_PRESENT == 1) && (__FPU_USED == 1)
|
|
SCB->CPACR |= ((3UL << (10*2))|(3UL << (11*2))); /* set CP10 and CP11 Full Access */
|
|
#endif
|
|
/* Reset the RCC clock configuration to the default reset state ------------*/
|
|
/* Set HSION bit */
|
|
RCC->CR |= RCC_CR_HSION;
|
|
|
|
/* Reset CFGR register */
|
|
RCC->CFGR = 0x00000000;
|
|
|
|
/* Reset HSEON, CSSON , CSION,RC48ON, CSIKERON PLL1ON, PLL2ON and PLL3ON bits */
|
|
RCC->CR &= 0xEAF6ED7FU;
|
|
|
|
/* Reset D1CFGR register */
|
|
RCC->D1CFGR = 0x00000000;
|
|
|
|
/* Reset D2CFGR register */
|
|
RCC->D2CFGR = 0x00000000;
|
|
|
|
/* Reset D3CFGR register */
|
|
RCC->D3CFGR = 0x00000000;
|
|
|
|
/* Reset PLLCKSELR register */
|
|
RCC->PLLCKSELR = 0x00000000;
|
|
|
|
/* Reset PLLCFGR register */
|
|
RCC->PLLCFGR = 0x00000000;
|
|
/* Reset PLL1DIVR register */
|
|
RCC->PLL1DIVR = 0x00000000;
|
|
/* Reset PLL1FRACR register */
|
|
RCC->PLL1FRACR = 0x00000000;
|
|
|
|
/* Reset PLL2DIVR register */
|
|
RCC->PLL2DIVR = 0x00000000;
|
|
|
|
/* Reset PLL2FRACR register */
|
|
|
|
RCC->PLL2FRACR = 0x00000000;
|
|
/* Reset PLL3DIVR register */
|
|
RCC->PLL3DIVR = 0x00000000;
|
|
|
|
/* Reset PLL3FRACR register */
|
|
RCC->PLL3FRACR = 0x00000000;
|
|
|
|
/* Reset HSEBYP bit */
|
|
RCC->CR &= 0xFFFBFFFFU;
|
|
|
|
/* Disable all interrupts */
|
|
RCC->CIER = 0x00000000;
|
|
|
|
#if defined (DATA_IN_D2_SRAM)
|
|
/* in case of initialized data in D2 SRAM (AHB SRAM) , enable the D2 SRAM clock ((AHB SRAM clock) */
|
|
#if defined(RCC_AHB2ENR_D2SRAM1EN)
|
|
RCC->AHB2ENR |= (RCC_AHB2ENR_D2SRAM1EN | RCC_AHB2ENR_D2SRAM2EN | RCC_AHB2ENR_D2SRAM3EN);
|
|
#else
|
|
RCC->AHB2ENR |= (RCC_AHB2ENR_AHBSRAM1EN | RCC_AHB2ENR_AHBSRAM2EN);
|
|
#endif /* RCC_AHB2ENR_D2SRAM1EN */
|
|
|
|
tmpreg = RCC->AHB2ENR;
|
|
(void) tmpreg;
|
|
#endif /* DATA_IN_D2_SRAM */
|
|
|
|
#if defined(DUAL_CORE) && defined(CORE_CM4)
|
|
/* Configure the Vector Table location add offset address for cortex-M4 ------------------*/
|
|
#ifdef VECT_TAB_SRAM
|
|
SCB->VTOR = D2_AHBSRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal SRAM */
|
|
#else
|
|
SCB->VTOR = FLASH_BANK2_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
#endif /* VECT_TAB_SRAM */
|
|
|
|
#else
|
|
/* dual core CM7 or single core line */
|
|
if((DBGMCU->IDCODE & 0xFFFF0000U) < 0x20000000U)
|
|
{
|
|
/* if stm32h7 revY*/
|
|
/* Change the switch matrix read issuing capability to 1 for the AXI SRAM target (Target 7) */
|
|
*((__IO uint32_t*)0x51008108) = 0x000000001U;
|
|
}
|
|
|
|
/* Configure the Vector Table location add offset address for cortex-M7 ------------------*/
|
|
#ifdef VECT_TAB_SRAM
|
|
SCB->VTOR = D1_AXISRAM_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal D1 AXI-RAM */
|
|
#else
|
|
SCB->VTOR = FLASH_BANK1_BASE | VECT_TAB_OFFSET; /* Vector Table Relocation in Internal FLASH */
|
|
#endif
|
|
|
|
#endif /*DUAL_CORE && CORE_CM4*/
|
|
|
|
}
|
|
|
|
/**
|
|
* @brief Update SystemCoreClock variable according to Clock Register Values.
|
|
* The SystemCoreClock variable contains the core clock , it can
|
|
* be used by the user application to setup the SysTick timer or configure
|
|
* other parameters.
|
|
*
|
|
* @note Each time the core clock changes, this function must be called
|
|
* to update SystemCoreClock variable value. Otherwise, any configuration
|
|
* based on this variable will be incorrect.
|
|
*
|
|
* @note - The system frequency computed by this function is not the real
|
|
* frequency in the chip. It is calculated based on the predefined
|
|
* constant and the selected clock source:
|
|
*
|
|
* - If SYSCLK source is CSI, SystemCoreClock will contain the CSI_VALUE(*)
|
|
* - If SYSCLK source is HSI, SystemCoreClock will contain the HSI_VALUE(**)
|
|
* - If SYSCLK source is HSE, SystemCoreClock will contain the HSE_VALUE(***)
|
|
* - If SYSCLK source is PLL, SystemCoreClock will contain the CSI_VALUE(*),
|
|
* HSI_VALUE(**) or HSE_VALUE(***) multiplied/divided by the PLL factors.
|
|
*
|
|
* (*) CSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
|
* 4 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
* (**) HSI_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
|
* 64 MHz) but the real value may vary depending on the variations
|
|
* in voltage and temperature.
|
|
*
|
|
* (***)HSE_VALUE is a constant defined in stm32h7xx_hal.h file (default value
|
|
* 25 MHz), user has to ensure that HSE_VALUE is same as the real
|
|
* frequency of the crystal used. Otherwise, this function may
|
|
* have wrong result.
|
|
*
|
|
* - The result of this function could be not correct when using fractional
|
|
* value for HSE crystal.
|
|
* @param None
|
|
* @retval None
|
|
*/
|
|
void SystemCoreClockUpdate (void)
|
|
{
|
|
uint32_t pllp, pllsource, pllm, pllfracen, hsivalue, tmp;
|
|
float_t fracn1, pllvco;
|
|
|
|
/* Get SYSCLK source -------------------------------------------------------*/
|
|
|
|
switch (RCC->CFGR & RCC_CFGR_SWS)
|
|
{
|
|
case RCC_CFGR_SWS_HSI: /* HSI used as system clock source */
|
|
SystemCoreClock = (uint32_t) (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3));
|
|
break;
|
|
|
|
case RCC_CFGR_SWS_CSI: /* CSI used as system clock source */
|
|
SystemCoreClock = CSI_VALUE;
|
|
break;
|
|
|
|
case RCC_CFGR_SWS_HSE: /* HSE used as system clock source */
|
|
SystemCoreClock = HSE_VALUE;
|
|
break;
|
|
|
|
case RCC_CFGR_SWS_PLL1: /* PLL1 used as system clock source */
|
|
|
|
/* PLL_VCO = (HSE_VALUE or HSI_VALUE or CSI_VALUE/ PLLM) * PLLN
|
|
SYSCLK = PLL_VCO / PLLR
|
|
*/
|
|
pllsource = (RCC->PLLCKSELR & RCC_PLLCKSELR_PLLSRC);
|
|
pllm = ((RCC->PLLCKSELR & RCC_PLLCKSELR_DIVM1)>> 4) ;
|
|
pllfracen = ((RCC->PLLCFGR & RCC_PLLCFGR_PLL1FRACEN)>>RCC_PLLCFGR_PLL1FRACEN_Pos);
|
|
fracn1 = (float_t)(uint32_t)(pllfracen* ((RCC->PLL1FRACR & RCC_PLL1FRACR_FRACN1)>> 3));
|
|
|
|
if (pllm != 0U)
|
|
{
|
|
switch (pllsource)
|
|
{
|
|
case RCC_PLLCKSELR_PLLSRC_HSI: /* HSI used as PLL clock source */
|
|
|
|
hsivalue = (HSI_VALUE >> ((RCC->CR & RCC_CR_HSIDIV)>> 3)) ;
|
|
pllvco = ( (float_t)hsivalue / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
|
|
|
break;
|
|
|
|
case RCC_PLLCKSELR_PLLSRC_CSI: /* CSI used as PLL clock source */
|
|
pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
|
break;
|
|
|
|
case RCC_PLLCKSELR_PLLSRC_HSE: /* HSE used as PLL clock source */
|
|
pllvco = ((float_t)HSE_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
|
break;
|
|
|
|
default:
|
|
pllvco = ((float_t)CSI_VALUE / (float_t)pllm) * ((float_t)(uint32_t)(RCC->PLL1DIVR & RCC_PLL1DIVR_N1) + (fracn1/(float_t)0x2000) +(float_t)1 );
|
|
break;
|
|
}
|
|
pllp = (((RCC->PLL1DIVR & RCC_PLL1DIVR_P1) >>9) + 1U ) ;
|
|
SystemCoreClock = (uint32_t)(float_t)(pllvco/(float_t)pllp);
|
|
}
|
|
else
|
|
{
|
|
SystemCoreClock = 0U;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
SystemCoreClock = CSI_VALUE;
|
|
break;
|
|
}
|
|
|
|
/* Compute SystemClock frequency --------------------------------------------------*/
|
|
tmp = D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_D1CPRE)>> RCC_D1CFGR_D1CPRE_Pos];
|
|
|
|
/* SystemCoreClock frequency : CM7 CPU frequency */
|
|
SystemCoreClock >>= tmp;
|
|
|
|
/* SystemD2Clock frequency : CM4 CPU, AXI and AHBs Clock frequency */
|
|
SystemD2Clock = (SystemCoreClock >> ((D1CorePrescTable[(RCC->D1CFGR & RCC_D1CFGR_HPRE)>> RCC_D1CFGR_HPRE_Pos]) & 0x1FU));
|
|
|
|
}
|
|
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
|
|
/**
|
|
* @}
|
|
*/
|
|
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|