rt-thread/bsp/at91sam9260/debug_scripts/at91sam9260.mac

253 lines
9.9 KiB
Plaintext

// ---------------------------------------------------------
// ATMEL Microcontroller Software Support - ROUSSET -
// ---------------------------------------------------------
// The software is delivered "AS IS" without warranty or
// condition of any kind, either express, implied or
// statutory. This includes without limitation any warranty
// or condition with respect to merchantability or fitness
// for any particular purpose, or against the infringements of
// intellectual property rights of others.
// ---------------------------------------------------------
// File: SAM9_SDRAM.mac
// User setup file for CSPY debugger.
// 1.1 08/Aug/06 jpp : Creation
//
// $Revision: 1.1.2.1 $
//
// ---------------------------------------------------------
__var __mac_i;
__var __mac_pt;
/*********************************************************************
*
* execUserReset() : JTAG set initially to Full Speed
*/
execUserReset()
{
__message "------------------------------ execUserReset ---------------------------------";
_MapRAMAt0(); //* Set the RAM memory at 0x00200000 & 0x00000000
__PllSetting(); //* Init PLL
__PllSetting100MHz();
__message "-------------------------------Set PC Reset ----------------------------------";
}
/*********************************************************************
*
* execUserPreload() : JTAG set initially to 32kHz
*/
execUserPreload()
{
__message "------------------------------ execUserPreload ---------------------------------";
__hwReset(0); //* Hardware Reset: CPU is automatically halted after the reset (JTAG is already configured to 32kHz)
__writeMemory32(0xD3,0x98,"Register"); //* Set CPSR
__PllSetting(); //* Init PLL
__PllSetting100MHz();
__initSDRAM(); //* Init SDRAM before load
_MapRAMAt0(); //* Set the RAM memory at 0x0020 0000 & 0x0000 0000
_InitRSTC(); //* Enable User Reset to allow execUserReset() execution
}
/*********************************************************************
*
* _InitRSTC()
*
* Function description
* Initializes the RSTC (Reset controller).
* This makes sense since the default is to not allow user resets, which makes it impossible to
* apply a second RESET via J-Link
*/
_InitRSTC() {
__writeMemory32(0xA5000001, 0xFFFFFD08,"Memory"); // Allow user reset
}
/*********************************************************************
*
* __initSDRAM()
* Function description
* Set SDRAM for works at 100 MHz
*/
__initSDRAM()
{
//* Configure EBI Chip select
// pCCFG->CCFG_EBICSA |= AT91C_EBI_CS1A_SDRAMC | (1 << 16);
// AT91C_CCFG_EBICSA ((AT91_REG *) 0xFFFFEF1C) // (CCFG) EBI Chip Select Assignement Register
__writeMemory32(0x0001003A,0xFFFFEF1C,"Memory");
//* Configure PIOs
//* AT91F_PIO_CfgPeriph( AT91C_BASE_PIOC, AT91C_PC16_D16 to AT91C_PC16_D31
// pPio->PIO_ASR = periphAEnable; AT91C_PIOC_ASR ((AT91_REG *) 0xFFFFF870) // (PIOC) Select A Register
// pPio->PIO_BSR = periphBEnable;AT91C_PIOC_BSR ((AT91_REG *) 0xFFFFF874) // (PIOC) Select B Register
// pPio->PIO_PDR = (periphAEnable | periphBEnable); // Set in Periph mode
__writeMemory32(0xFFFF0000,0xFFFFF870,"Memory");
__writeMemory32(0x00000000,0xFFFFF874,"Memory");
__writeMemory32(0xFFFF0000,0xFFFFF804,"Memory");
//* psdrc->SDRAMC_CR = AT91C_SDRAMC_NC_9 | AT91C_SDRAMC_NR_13 | AT91C_SDRAMC_CAS_2 |
// AT91C_SDRAMC_NB_4_BANKS | AT91C_SDRAMC_DBW_32_BITS | AT91C_SDRAMC_TWR_2 | AT91C_SDRAMC_TRC_7 |
// AT91C_SDRAMC_TRP_2 | AT91C_SDRAMC_TRCD_2 | AT91C_SDRAMC_TRAS_5 | AT91C_SDRAMC_TXSR_8 ;
__writeMemory32(0x85227259,0xFFFFEA08,"Memory");
__delay(1); //100
//* psdrc->SDRAMC_MR = 0x00000002; // Set PRCHG AL
__writeMemory32(0x00000002,0xFFFFEA00,"Memory");
//* *AT91C_SDRAM = 0x00000000; // Perform PRCHG
__writeMemory32(0x00000000,0x20000000,"Memory");
__delay(1); //100
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 1st CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+4) = 0x00000001; // Perform CBR
__writeMemory32(0x00000001,0x20000010,"Memory");
//* psdrc->SDRAMC_MR = 0x00000004; // Set 2 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+8) = 0x00000002; // Perform CBR
__writeMemory32(0x00000002,0x20000020,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 3 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0xc) = 0x00000003; // Perform CBR
__writeMemory32(0x00000003,0x20000030,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 4 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x10) = 0x00000004; // Perform CBR
__writeMemory32(0x00000004,0x20000040,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 5 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x14) = 0x00000005; // Perform CBR
__writeMemory32(0x00000005,0x20000050,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 6 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x18) = 0x00000006; // Perform CBR
__writeMemory32(0x00000006,0x20000060,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 7 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x1c) = 0x00000007; // Perform CBR
__writeMemory32(0x00000007,0x20000070,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_RFSH_CMD; // Set 8 CBR
__writeMemory32(0x00000004,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x20) = 0x00000008; // Perform CBR
__writeMemory32(0x00000008,0x20000080,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_LMR_CMD; // Set LMR operation
__writeMemory32(0x00000003,0xFFFFEA00,"Memory");
//* *(AT91C_SDRAM+0x24) = 0xcafedede; // Perform LMR burst=1, lat=2
__writeMemory32(0xCAFEDEDE,0x20000090,"Memory");
//* psdrc->SDRAMC_TR = (AT91C_MASTER_CLOCK * 7)/1000000; // Set Refresh Timer 390 for 25MHz (TR= 15.6 * F )
// // (F : system clock freq. MHz
__writeMemory32(0x000002B7,0xFFFFEA04,"Memory");
//* psdrc->SDRAMC_MR = AT91C_SDRAMC_MODE_NORMAL_CMD; // Set Normal mode
__writeMemory32(0x00000000,0xFFFFEA00,"Memory");
//* *AT91C_SDRAM = 0x00000000; // Perform Normal mode
__writeMemory32(0x00000000,0x20000000,"Memory");
__message "------------------------------- SDRAM Done at 100 MHz -------------------------------";
}
/*********************************************************************
*
* _MapRAMAt0()
* Function description
* Remap RAM at 0
*/
_MapRAMAt0()
{
// AT91C_MATRIX_MRCR ((AT91_REG *) 0xFFFFEF00) // (MATRIX) Master Remp Control Register
__mac_i=__readMemory32(0xFFFFEF00,"Memory");
__message "----- AT91C_MATRIX_MRCR : 0x",__mac_i:%X;
if ( ((__mac_i & 0x01) == 0) || ((__mac_i & 0x02) == 0)){
__message "------------------------------- The Remap is NOT & REMAP ----------------------------";
__writeMemory32(0x00000003,0xFFFFEF00,"Memory");
__mac_i=__readMemory32(0xFFFFEF00,"Memory");
__message "----- AT91C_MATRIX_MRCR : 0x",__mac_i:%X;
} else {
__message "------------------------------- The Remap is done -----------------------------------";
}
}
/*********************************************************************
*
* __PllSetting()
* Function description
* Initializes the PMC.
* 1. Enable the Main Oscillator
* 2. Configure PLL
* 3. Switch Master
*/
__PllSetting()
{
if ((__readMemory32(0xFFFFFC30,"Memory")&0x3) != 0 ) {
//* Disable all PMC interrupt ( $$ JPP)
//* AT91C_PMC_IDR ((AT91_REG *) 0xFFFFFC64) //(PMC) Interrupt Disable Register
//* pPmc->PMC_IDR = 0xFFFFFFFF;
__writeMemory32(0xFFFFFFFF,0xFFFFFC64,"Memory");
//* AT91C_PMC_PCDR ((AT91_REG *) 0xFFFFFC14) //(PMC) Peripheral Clock Disable Register
__writeMemory32(0xFFFFFFFF,0xFFFFFC14,"Memory");
// Disable all clock only Processor clock is enabled.
__writeMemory32(0xFFFFFFFE,0xFFFFFC04,"Memory");
// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
__writeMemory32(0x00000001,0xFFFFFC30,"Memory");
__delay(10); //10000
// write reset value to PLLA and PLLB
// AT91C_PMC_PLLAR ((AT91_REG *) 0xFFFFFC28) // (PMC) PLL A Register
__writeMemory32(0x00003F00,0xFFFFFC28,"Memory");
// AT91C_PMC_PLLBR ((AT91_REG *) 0xFFFFFC2C) // (PMC) PLL B Register
__writeMemory32(0x00003F00,0xFFFFFC2C,"Memory");
__delay(10); //10000
__message "------------------------------- PLL Enable -----------------------------------------";
} else {
__message " ********* Core in SLOW CLOCK mode ********* "; }
}
/*********************************************************************
*
* __PllSetting100MHz()
* Function description
* Set core at 200 MHz and MCK at 100 MHz
*/
__PllSetting100MHz()
{
__message "------------------------------- PLL Set at 100 MHz ----------------------------------";
//* pPmc->PMC_MOR = (( AT91C_CKGR_OSCOUNT & (0x40 <<8) | AT91C_CKGR_MOSCEN ));
__writeMemory32(0x00004001,0xFFFFFC20,"Memory");
__delay(10); //10000
// AT91C_PMC_MCKR ((AT91_REG *) 0xFFFFFC30) // (PMC) Master Clock Register
__writeMemory32(0x00000001,0xFFFFFC30,"Memory");
__delay(10); //10000
//* AT91C_BASE_CKGR->CKGR_PLLAR = (AT91C_CKGR_SRCA | ((96 << 16) & AT91C_CKGR_MULA) |
// (AT91C_CKGR_PLLACOUNT | (AT91C_CKGR_OUTA_0 | (9);
__writeMemory32(0x2060BF09,0xFFFFFC28,"Memory");
__delay(10); //10000
// AT91C_BASE_PMC->PMC_PLLBR = BOARD_USBDIV| BOARD_CKGR_PLLB | BOARD_PLLBCOUNT | BOARD_MULB| BOARD_DIVB;
__writeMemory32(0x207C3F0C,0xFFFFFC2C,"Memory");
__delay(10); //10000
//* AT91C_BASE_PMC->PMC_MCKR = AT91C_PMC_CSS_PLLA_CLK | AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2;;
__writeMemory32(0x00000102,0xFFFFFC30,"Memory");
__delay(10); //10000
}