125 lines
6.7 KiB
C
125 lines
6.7 KiB
C
/*!
|
|
\file usb_defines.h
|
|
\brief USB core defines
|
|
|
|
\version 2017-06-06, V1.0.0, firmware for GD32F3x0
|
|
\version 2019-06-01, V2.0.0, firmware for GD32F3x0
|
|
*/
|
|
|
|
/*
|
|
Copyright (c) 2019, GigaDevice Semiconductor Inc.
|
|
|
|
Redistribution and use in source and binary forms, with or without modification,
|
|
are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice, this
|
|
list of conditions and the following disclaimer.
|
|
2. Redistributions in binary form must reproduce the above copyright notice,
|
|
this list of conditions and the following disclaimer in the documentation
|
|
and/or other materials provided with the distribution.
|
|
3. Neither the name of the copyright holder nor the names of its contributors
|
|
may be used to endorse or promote products derived from this software without
|
|
specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
|
|
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
|
|
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
|
|
WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
|
|
OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef USB_DEFINES_H
|
|
#define USB_DEFINES_H
|
|
|
|
#include "usb_conf.h"
|
|
|
|
#ifndef NULL
|
|
#define NULL (void *)0 /*!< USB null marco value*/
|
|
#endif /* NULL */
|
|
|
|
#define USB_CORE_SPEED_HIGH 0U /* USB core speed is high-speed */
|
|
#define USB_CORE_SPEED_FULL 1U /* USB core speed is full-speed */
|
|
|
|
#define USBFS_MAX_PACKET_SIZE 64U /* USBFS max packet size */
|
|
#define USBFS_MAX_HOST_CHANNELCOUNT 8U /* USBFS host channel count */
|
|
#define USBFS_MAX_DEV_EPCOUNT 4U /* USBFS device endpoint count */
|
|
#define USBFS_MAX_FIFO_WORDLEN 320U /* USBFS max fifo size in words */
|
|
|
|
#define USBHS_MAX_PACKET_SIZE 512U /* USBHS max packet size */
|
|
#define USBHS_MAX_HOST_CHANNELCOUNT 12U /* USBHS host channel count */
|
|
#define USBHS_MAX_DEV_EPCOUNT 6U /* USBHS device endpoint count */
|
|
#define USBHS_MAX_FIFO_WORDLEN 1280U /* USBHS max fifo size in words */
|
|
|
|
#define USB_CORE_ULPI_PHY 1U /* USB core use external ULPI PHY */
|
|
#define USB_CORE_EMBEDDED_PHY 2U /* USB core use embedded PHY */
|
|
|
|
#define DSTAT_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0U /* USB enumerate speed use high-speed PHY clock in 30MHz or 60MHz */
|
|
#define DSTAT_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1U /* USB enumerate speed use full-speed PHY clock in 30MHz or 60MHz */
|
|
#define DSTAT_ENUMSPD_LS_PHY_6MHZ 2U /* USB enumerate speed use low-speed PHY clock in 6MHz */
|
|
#define DSTAT_ENUMSPD_FS_PHY_48MHZ 3U /* USB enumerate speed use full-speed PHY clock in 48MHz */
|
|
|
|
#define GRSTATR_RPCKST_IN 2U /* IN data packet received */
|
|
#define GRSTATR_RPCKST_IN_XFER_COMP 3U /* IN transfer completed (generates an interrupt if poped) */
|
|
#define GRSTATR_RPCKST_DATA_TOGGLE_ERR 5U /* data toggle error (generates an interrupt if poped) */
|
|
#define GRSTATR_RPCKST_CH_HALTED 7U /* channel halted (generates an interrupt if poped) */
|
|
|
|
#define DEVICE_MODE 0U /* USB core in device mode */
|
|
#define HOST_MODE 1U /* USB core in host mode */
|
|
#define OTG_MODE 2U /* USB core in OTG mode */
|
|
|
|
#define USB_EPTYPE_CTRL 0U /* USB control endpoint type */
|
|
#define USB_EPTYPE_ISOC 1U /* USB synchronous endpoint type */
|
|
#define USB_EPTYPE_BULK 2U /* USB bulk endpoint type */
|
|
#define USB_EPTYPE_INTR 3U /* USB interrupt endpoint type */
|
|
#define USB_EPTYPE_MASK 3U /* USB endpoint type mask */
|
|
|
|
#define RXSTAT_GOUT_NAK 1U /* global OUT NAK (triggers an interrupt) */
|
|
#define RXSTAT_DATA_UPDT 2U /* OUT data packet received */
|
|
#define RXSTAT_XFER_COMP 3U /* OUT transfer completed (triggers an interrupt) */
|
|
#define RXSTAT_SETUP_COMP 4U /* SETUP transaction completed (triggers an interrupt) */
|
|
#define RXSTAT_SETUP_UPDT 6U /* SETUP data packet received */
|
|
|
|
#define DPID_DATA0 0U /* device endpoint data PID is DATA0 */
|
|
#define DPID_DATA1 2U /* device endpoint data PID is DATA1 */
|
|
#define DPID_DATA2 1U /* device endpoint data PID is DATA2 */
|
|
#define DPID_MDATA 3U /* device endpoint data PID is MDATA */
|
|
|
|
#define HC_PID_DATA0 0U /* host channel data PID is DATA0 */
|
|
#define HC_PID_DATA2 1U /* host channel data PID is DATA2 */
|
|
#define HC_PID_DATA1 2U /* host channel data PID is DATA1 */
|
|
#define HC_PID_SETUP 3U /* host channel data PID is SETUP */
|
|
|
|
#define HPRT_PRTSPD_HIGH_SPEED 0U /* host port speed use high speed */
|
|
#define HPRT_PRTSPD_FULL_SPEED 1U /* host port speed use full speed */
|
|
#define HPRT_PRTSPD_LOW_SPEED 2U /* host port speed use low speed */
|
|
|
|
#define HCTLR_30_60_MHZ 0U /* USB PHY(ULPI) clock is 60MHz */
|
|
#define HCTLR_48_MHZ 1U /* USB PHY(embedded full-speed) clock is 48MHz */
|
|
#define HCTLR_6_MHZ 2U /* USB PHY(embedded low-speed) clock is 6MHz */
|
|
|
|
#define HCCHAR_CTRL 0U /* control channel type */
|
|
#define HCCHAR_ISOC 1U /* synchronous channel type */
|
|
#define HCCHAR_BULK 2U /* bulk channel type */
|
|
#define HCCHAR_INTR 3U /* interrupt channel type */
|
|
|
|
typedef enum
|
|
{
|
|
USB_HS_CORE_ID = 0,
|
|
USB_FS_CORE_ID = 1
|
|
}usb_core_id_enum;
|
|
|
|
typedef enum
|
|
{
|
|
USB_SPEED_UNKNOWN = 0,
|
|
USB_SPEED_LOW,
|
|
USB_SPEED_FULL,
|
|
USB_SPEED_HIGH
|
|
}usb_speed_enum;
|
|
|
|
#endif /* USB_DEFINES_H */
|