rt-thread/bsp/imxrt/Libraries/imxrt1050/devices/MIMXRT1052/drivers/fsl_bee.h

229 lines
7.6 KiB
C

/*
* The Clear BSD License
* Copyright 2017 NXP
* All rights reserved.
*
*
* Redistribution and use in source and binary forms, with or without modification,
* are permitted (subject to the limitations in the disclaimer below) provided
* that the following conditions are met:
*
* o Redistributions of source code must retain the above copyright notice, this list
* of conditions and the following disclaimer.
*
* o Redistributions in binary form must reproduce the above copyright notice, this
* list of conditions and the following disclaimer in the documentation and/or
* other materials provided with the distribution.
*
* o Neither the name of the copyright holder nor the names of its
* contributors may be used to endorse or promote products derived from this
* software without specific prior written permission.
*
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _FSL_BEE_H_
#define _FSL_BEE_H_
#include "fsl_common.h"
/*******************************************************************************
* Definitions
*******************************************************************************/
/*! @name Driver version */
/*@{*/
/*! @brief BEE driver version. Version 2.0.0.
*
* Current version: 2.0.0
*
* Change log:
* - Version 2.0.0
* - Initial version
*/
#define FSL_BEE_DRIVER_VERSION (MAKE_VERSION(2, 0, 0))
/*@}*/
typedef enum _bee_aes_mode
{
kBEE_AesEcbMode = 0U, /*!< AES ECB Mode */
kBEE_AesCtrMode = 1U /*!< AES CTR Mode */
} bee_aes_mode_t;
typedef enum _bee_region
{
kBEE_Region0 = 0U, /*!< BEE region 0 */
kBEE_Region1 = 1U /*!< BEE region 1 */
} bee_region_t;
typedef enum _bee_region_enable
{
kBEE_RegionDisabled = 0U, /*!< BEE region disabled */
kBEE_RegionEnabled = 1U /*!< BEE region enabled */
} bee_region_enable_t;
typedef enum _bee_status_flags
{
kBEE_DisableAbortFlag = 1U, /*!< Disable abort flag. */
kBEE_Reg0ReadSecViolation = 2U, /*!< Region-0 read channel security violation */
kBEE_ReadIllegalAccess = 4U, /*!< Read channel illegal access detected */
kBEE_Reg1ReadSecViolation = 8U, /*!< Region-1 read channel security violation */
kBEE_Reg0AccessViolation = 16U, /*!< Protected region-0 access violation */
kBEE_Reg1AccessViolation = 32U, /*!< Protected region-1 access violation */
kBEE_IdleFlag = BEE_STATUS_BEE_IDLE_MASK /*!< Idle flag */
} bee_status_flags_t;
/*! @brief BEE region configuration structure. */
typedef struct _bee_region_config
{
bee_aes_mode_t mode; /*!< AES mode used for encryption/decryption */
uint32_t regionBot; /*!< Region bottom address */
uint32_t regionTop; /*!< Region top address */
uint32_t addrOffset; /*!< Region address offset */
bee_region_enable_t regionEn; /*!< Region enable/disable */
} bee_region_config_t;
/*******************************************************************************
* API
******************************************************************************/
#if defined(__cplusplus)
extern "C" {
#endif
/*!
* @brief Resets BEE module to factory default values.
*
* This function performs hardware reset of BEE module. Attributes and keys from software for both regions are cleared.
*
* @param base BEE peripheral address.
*/
void BEE_Init(BEE_Type *base);
/*!
* @brief Resets BEE module, clears keys for both regions and disables clock to the BEE.
*
* This function performs hardware reset of BEE module and disables clocks. Attributes and keys from software for both
* regions are cleared.
*
* @param base BEE peripheral address.
*/
void BEE_Deinit(BEE_Type *base);
/*!
* @brief Enables BEE decryption.
*
* This function enables decryption using BEE.
*
* @param base BEE peripheral address.
*/
static inline void BEE_Enable(BEE_Type *base)
{
base->CTRL |= BEE_CTRL_BEE_ENABLE_MASK | BEE_CTRL_KEY_VALID_MASK;
}
/*!
* @brief Disables BEE decryption.
*
* This function disables decryption using BEE.
*
* @param base BEE peripheral address.
*/
static inline void BEE_Disable(BEE_Type *base)
{
base->CTRL &= ~BEE_CTRL_BEE_ENABLE_MASK | BEE_CTRL_KEY_VALID_MASK;
}
/*!
* @brief Loads default values to the BEE region configuration structure.
*
* Loads default values to the BEE region configuration structure. The default values are as follows:
* @code
* config->mode = kBEE_AesCbcMode;
* config->regionBot = 0U;
* config->regionTop = 0U;
* config->addrOffset = 0xF0000000U;
* config->regionEn = kBEE_RegionDisabled;
* @endcode
*
* @param config Configuration structure for BEE region.
*/
void BEE_GetDefaultConfig(bee_region_config_t *config);
/*!
* @brief Sets BEE region configuration.
*
* This function sets BEE region settings accorging to given configuration structure.
*
* @param base BEE peripheral address.
* @param region Selection of the BEE region to be configured.
* @param config Configuration structure for BEE region.
*/
status_t BEE_SetRegionConfig(BEE_Type *base, bee_region_t region, const bee_region_config_t *config);
/*!
* @brief Loads the AES key and nonce for selected region into BEE key registers.
*
* This function loads given AES key and nonce(only AES CTR mode) to BEE register for the given region.
*
* Please note, that eFuse BEE_KEYx_SEL must be set accordingly to be able to load and use key loaded in BEE registers.
* Otherwise, key cannot loaded and BEE will use key from OTPMK or SW_GP2.
*
* @param base BEE peripheral address.
* @param region Selection of the BEE region to be configured.
* @param key AES key.
* @param keySize Size of AES key.
* @param nonce AES nonce.
* @param nonceSize Size of AES nonce.
*/
status_t BEE_SetRegionKey(
BEE_Type *base, bee_region_t region, const uint8_t *key, size_t keySize, const uint8_t *nonce, size_t nonceSize);
/*!
* @brief Gets the BEE status flags.
*
* This function returns status of BEE peripheral.
*
* @param base BEE peripheral address.
*
* @return The status flags. This is the logical OR of members of the
* enumeration ::bee_status_flags_t
*/
uint32_t BEE_GetStatusFlags(BEE_Type *base);
/*!
* @brief Clears the BEE status flags.
*
* @param base BEE peripheral base address.
* @param mask The status flags to clear. This is a logical OR of members of the
* enumeration ::bee_status_flags_t
*/
void BEE_ClearStatusFlags(BEE_Type *base, uint32_t mask);
/*!
* @brief Computes offset to be set for specifed memory location.
*
* This function calculates offset that must be set for BEE region to access physical memory location.
*
* @param addressMemory Address of physical memory location.
*/
static inline uint32_t BEE_GetOffset(uint32_t addressMemory)
{
return (addressMemory >> 16);
}
#if defined(__cplusplus)
}
#endif
#endif /* _FSL_BEE_H_ */