1012 lines
40 KiB
C
1012 lines
40 KiB
C
/***************************************************************************//**
|
|
* @file
|
|
* @brief Low Energy Sensor (LESENSE) Peripheral API
|
|
* @author Energy Micro AS
|
|
* @version 3.0.0
|
|
*******************************************************************************
|
|
* @section License
|
|
* <b>(C) Copyright 2012 Energy Micro AS, http://www.energymicro.com</b>
|
|
*******************************************************************************
|
|
*
|
|
* Permission is granted to anyone to use this software for any purpose,
|
|
* including commercial applications, and to alter it and redistribute it
|
|
* freely, subject to the following restrictions:
|
|
*
|
|
* 1. The origin of this software must not be misrepresented; you must not
|
|
* claim that you wrote the original software.
|
|
* 2. Altered source versions must be plainly marked as such, and must not be
|
|
* misrepresented as being the original software.
|
|
* 3. This notice may not be removed or altered from any source distribution.
|
|
*
|
|
* DISCLAIMER OF WARRANTY/LIMITATION OF REMEDIES: Energy Micro AS has no
|
|
* obligation to support this Software. Energy Micro AS is providing the
|
|
* Software "AS IS", with no express or implied warranties of any kind,
|
|
* including, but not limited to, any implied warranties of merchantability
|
|
* or fitness for any particular purpose or warranties against infringement
|
|
* of any proprietary rights of a third party.
|
|
*
|
|
* Energy Micro AS will not be liable for any consequential, incidental, or
|
|
* special damages, or any other relief, or for any claim by any third party,
|
|
* arising from your use of this Software.
|
|
*
|
|
******************************************************************************/
|
|
#include "em_lesense.h"
|
|
#if defined(LESENSE_COUNT) && (LESENSE_COUNT > 0)
|
|
#include "em_assert.h"
|
|
#include "em_bitband.h"
|
|
#include "em_cmu.h"
|
|
|
|
/***************************************************************************//**
|
|
* @addtogroup EM_Library
|
|
* @{
|
|
******************************************************************************/
|
|
|
|
/***************************************************************************//**
|
|
* @addtogroup LESENSE
|
|
* @brief Low Energy Sensor (LESENSE) Peripheral API
|
|
* @{
|
|
******************************************************************************/
|
|
|
|
/*******************************************************************************
|
|
************************** LOCAL FUNCTIONS ********************************
|
|
******************************************************************************/
|
|
|
|
|
|
/*******************************************************************************
|
|
************************** GLOBAL FUNCTIONS *******************************
|
|
******************************************************************************/
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Initialize the LESENSE module.
|
|
*
|
|
* @details
|
|
* This function configures the main parameters of the LESENSE interface.
|
|
* Please refer to the initialization parameter type definition
|
|
* (LESENSE_Init_TypeDef) for more details.
|
|
*
|
|
* @note
|
|
* LESENSE_Init() has been designed for initializing LESENSE once in an
|
|
* operation cycle. Be aware of the effects of reconfiguration if using this
|
|
* function from multiple sources in your code. This function has not been
|
|
* designed to be re-entrant.
|
|
* Requesting reset by setting @p reqReset to true is required in each reset
|
|
* or power-on cycle in order to configure the default values of the RAM
|
|
* mapped LESENSE registers.
|
|
* Notice that GPIO pins used by the LESENSE module must be properly
|
|
* configured by the user explicitly, in order for the LESENSE to work as
|
|
* intended.
|
|
* (When configuring pins, one should remember to consider the sequence of
|
|
* configuration, in order to avoid unintended pulses/glitches on output
|
|
* pins.)
|
|
*
|
|
* @param[in] init
|
|
* LESENSE initialization structure.
|
|
*
|
|
* @param[in] reqReset
|
|
* Request to call LESENSE_Reset() first in order to initialize all LESENSE
|
|
* registers with the default value.
|
|
******************************************************************************/
|
|
void LESENSE_Init(LESENSE_Init_TypeDef const *init, bool const reqReset)
|
|
{
|
|
/* Sanity check of initialization values */
|
|
EFM_ASSERT((uint32_t)init->timeCtrl.startDelay < 4U);
|
|
EFM_ASSERT((uint32_t)init->perCtrl.dacPresc < 32U);
|
|
|
|
/* Reset LESENSE registers if requested. */
|
|
if (reqReset)
|
|
{
|
|
LESENSE_Reset();
|
|
}
|
|
|
|
/* Set sensor start delay for each channel. */
|
|
LESENSE_StartDelaySet((uint32_t)init->timeCtrl.startDelay);
|
|
|
|
/* LESENSE core control configuration.
|
|
* Set PRS source, SCANCONF register usage strategy, interrupt and
|
|
* DMA trigger level condition, DMA wakeup condition, bias mode,
|
|
* enable/disable to sample both ACMPs simultaneously, enable/disable to store
|
|
* SCANRES in CNT_RES after each scan, enable/disable to always write to the
|
|
* result buffer, even if it is full, enable/disable LESENSE running in debug
|
|
* mode. */
|
|
LESENSE->CTRL = ((uint32_t)init->coreCtrl.prsSel <<
|
|
_LESENSE_CTRL_PRSSEL_SHIFT) |
|
|
(uint32_t)init->coreCtrl.scanConfSel |
|
|
(uint32_t)init->coreCtrl.bufTrigLevel |
|
|
(uint32_t)init->coreCtrl.wakeupOnDMA |
|
|
((uint32_t)init->coreCtrl.invACMP0 <<
|
|
_LESENSE_CTRL_ACMP0INV_SHIFT) |
|
|
((uint32_t)init->coreCtrl.invACMP1 <<
|
|
_LESENSE_CTRL_ACMP1INV_SHIFT) |
|
|
((uint32_t)init->coreCtrl.dualSample <<
|
|
_LESENSE_CTRL_DUALSAMPLE_SHIFT) |
|
|
((uint32_t)init->coreCtrl.storeScanRes <<
|
|
_LESENSE_CTRL_STRSCANRES_SHIFT) |
|
|
((uint32_t)init->coreCtrl.bufOverWr <<
|
|
_LESENSE_CTRL_BUFOW_SHIFT) |
|
|
((uint32_t)init->coreCtrl.debugRun <<
|
|
_LESENSE_CTRL_DEBUGRUN_SHIFT);
|
|
|
|
/* Set scan mode in the CTRL register using the provided function, don't
|
|
* start scanning immediately. */
|
|
LESENSE_ScanModeSet((LESENSE_ScanMode_TypeDef)init->coreCtrl.scanStart, false);
|
|
|
|
/* LESENSE peripheral control configuration.
|
|
* Set DAC0 and DAC1 data source, conversion mode, output mode. Set DAC
|
|
* prescaler and reference. Set ACMP0 and ACMP1 control mode. Set ACMP and DAC
|
|
* duty cycle (warm up) mode. */
|
|
LESENSE->PERCTRL = ((uint32_t)init->perCtrl.dacCh0Data <<
|
|
_LESENSE_PERCTRL_DACCH0DATA_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacCh0ConvMode <<
|
|
_LESENSE_PERCTRL_DACCH0CONV_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacCh0OutMode <<
|
|
_LESENSE_PERCTRL_DACCH0OUT_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacCh1Data <<
|
|
_LESENSE_PERCTRL_DACCH1DATA_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacCh1ConvMode <<
|
|
_LESENSE_PERCTRL_DACCH1CONV_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacCh1OutMode <<
|
|
_LESENSE_PERCTRL_DACCH1OUT_SHIFT) |
|
|
((uint32_t)init->perCtrl.dacPresc <<
|
|
_LESENSE_PERCTRL_DACPRESC_SHIFT) |
|
|
(uint32_t)init->perCtrl.dacRef |
|
|
((uint32_t)init->perCtrl.acmp0Mode <<
|
|
_LESENSE_PERCTRL_ACMP0MODE_SHIFT) |
|
|
((uint32_t)init->perCtrl.acmp1Mode <<
|
|
_LESENSE_PERCTRL_ACMP1MODE_SHIFT) |
|
|
(uint32_t)init->perCtrl.warmupMode;
|
|
|
|
/* LESENSE decoder general control configuration.
|
|
* Set decoder input source, select PRS input for decoder bits.
|
|
* Enable/disable the decoder to check the present state.
|
|
* Enable/disable decoder to channel interrupt mapping.
|
|
* Enable/disable decoder hysteresis on PRS output.
|
|
* Enable/disable decoder hysteresis on count events.
|
|
* Enable/disable decoder hysteresis on interrupt requests.
|
|
* Enable/disable count mode on LESPRS0 and LESPRS1. */
|
|
LESENSE->DECCTRL = (uint32_t)init->decCtrl.decInput |
|
|
((uint32_t)init->decCtrl.prsChSel0 <<
|
|
_LESENSE_DECCTRL_PRSSEL0_SHIFT) |
|
|
((uint32_t)init->decCtrl.prsChSel1 <<
|
|
_LESENSE_DECCTRL_PRSSEL1_SHIFT) |
|
|
((uint32_t)init->decCtrl.prsChSel2 <<
|
|
_LESENSE_DECCTRL_PRSSEL2_SHIFT) |
|
|
((uint32_t)init->decCtrl.prsChSel3 <<
|
|
_LESENSE_DECCTRL_PRSSEL3_SHIFT) |
|
|
((uint32_t)init->decCtrl.chkState <<
|
|
_LESENSE_DECCTRL_ERRCHK_SHIFT) |
|
|
((uint32_t)init->decCtrl.intMap <<
|
|
_LESENSE_DECCTRL_INTMAP_SHIFT) |
|
|
((uint32_t)init->decCtrl.hystPRS0 <<
|
|
_LESENSE_DECCTRL_HYSTPRS0_SHIFT) |
|
|
((uint32_t)init->decCtrl.hystPRS1 <<
|
|
_LESENSE_DECCTRL_HYSTPRS1_SHIFT) |
|
|
((uint32_t)init->decCtrl.hystPRS2 <<
|
|
_LESENSE_DECCTRL_HYSTPRS2_SHIFT) |
|
|
((uint32_t)init->decCtrl.hystIRQ <<
|
|
_LESENSE_DECCTRL_HYSTIRQ_SHIFT) |
|
|
((uint32_t)init->decCtrl.prsCount <<
|
|
_LESENSE_DECCTRL_PRSCNT_SHIFT);
|
|
|
|
/* Set initial LESENSE decoder state. */
|
|
LESENSE_DecoderStateSet((uint32_t)init->decCtrl.initState);
|
|
|
|
/* LESENSE bias control configuration. */
|
|
LESENSE->BIASCTRL = (uint32_t)init->coreCtrl.biasMode;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set scan frequency for periodic scanning.
|
|
*
|
|
* @details
|
|
* This function only applies to LESENSE if period counter is being used as
|
|
* a trigger for scan start.
|
|
* The calculation is based on the following formula:
|
|
* Fscan = LFACLKles / ((1+PCTOP)*2^PCPRESC)
|
|
*
|
|
* @note
|
|
* Note that the calculation does not necessarily result in the requested
|
|
* scan frequency due to integer division. Check the return value for the
|
|
* resulted scan frequency.
|
|
*
|
|
* @param[in] refFreq
|
|
* Select reference LFACLK clock frequency in Hz. If set to 0, the current
|
|
* clock frequency is being used as a reference.
|
|
*
|
|
* @param[in] scanFreq
|
|
* Set the desired scan frequency in Hz.
|
|
*
|
|
* @return
|
|
* Frequency in Hz calculated and set by this function. Users can use this to
|
|
* compare the requested and set values.
|
|
******************************************************************************/
|
|
uint32_t LESENSE_ScanFreqSet(uint32_t refFreq, uint32_t const scanFreq)
|
|
{
|
|
uint32_t tmp;
|
|
uint32_t pcPresc = 0UL; /* Period counter prescaler. */
|
|
uint32_t clkDiv = 1UL; /* Clock divisor value (2^pcPresc). */
|
|
uint32_t pcTop = 63UL; /* Period counter top value (max. 63). */
|
|
uint32_t calcScanFreq; /* Variable for testing the calculation algorithm. */
|
|
|
|
|
|
/* If refFreq is set to 0, the currently configured reference clock is
|
|
* assumed. */
|
|
if (!refFreq)
|
|
{
|
|
refFreq = CMU_ClockFreqGet(cmuClock_LESENSE);
|
|
}
|
|
|
|
/* Max. value of pcPresc is 128, thus using reference frequency less than
|
|
* 33554431Hz (33.554431MHz), the frequency calculation in the while loop
|
|
* below will not overflow. */
|
|
EFM_ASSERT(refFreq < ((uint32_t)UINT32_MAX / 128UL));
|
|
|
|
/* Sanity check of scan frequency value. */
|
|
EFM_ASSERT((scanFreq > 0U) && (scanFreq <= refFreq));
|
|
|
|
/* Calculate the minimum necessary prescaler value in order to provide the
|
|
* biggest possible resolution for setting scan frequency.
|
|
* Maximum number of calculation cycles is 7 (value of lesenseClkDiv_128). */
|
|
while ((refFreq / ((uint32_t)scanFreq * clkDiv) > (pcTop + 1UL)) &&
|
|
(pcPresc < lesenseClkDiv_128))
|
|
{
|
|
++pcPresc;
|
|
clkDiv = (uint32_t)1UL << pcPresc;
|
|
}
|
|
|
|
/* Calculate pcTop value. */
|
|
pcTop = ((uint32_t)refFreq / ((uint32_t)scanFreq * clkDiv)) - 1UL;
|
|
|
|
/* Clear current PCPRESC and PCTOP settings. Be aware of the effect of
|
|
* non-atomic Read-Modify-Write on LESENSE->TIMCRTL. */
|
|
tmp = LESENSE->TIMCTRL & (~(_LESENSE_TIMCTRL_PCPRESC_MASK)&
|
|
~(_LESENSE_TIMCTRL_PCTOP_MASK));
|
|
|
|
/* Set new values in tmp while reserving other settings. */
|
|
tmp |= ((uint32_t)pcPresc << _LESENSE_TIMCTRL_PCPRESC_SHIFT) |
|
|
((uint32_t)pcTop << _LESENSE_TIMCTRL_PCTOP_SHIFT);
|
|
|
|
/* Set values in LESENSE_TIMCTRL register. */
|
|
LESENSE->TIMCTRL = tmp;
|
|
|
|
/* For testing the calculation algorithm. */
|
|
calcScanFreq = ((uint32_t)refFreq / ((uint32_t)(1UL + pcTop) * clkDiv));
|
|
|
|
return calcScanFreq;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set scan mode of the LESENSE channels.
|
|
*
|
|
* @details
|
|
* This function configures how the scan start is being triggered. It can be
|
|
* used for re-configuring the scan mode while running the application but it
|
|
* is also used by LESENSE_Init() for initialization.
|
|
*
|
|
* @note
|
|
* Users can configure the scan mode by LESENSE_Init() function, but only with
|
|
* a significant overhead. This simple function serves the purpose of
|
|
* controlling this parameter after the channel has been configured.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle!
|
|
*
|
|
* @param[in] scanMode
|
|
* Select where to map LESENSE alternate excitation channels.
|
|
* @li lesenseScanStartPeriodic - New scan is started each time the period
|
|
* counter overflows.
|
|
* @li lesenseScanStartOneShot - Single scan is performed when
|
|
* LESENSE_ScanStart() is called.
|
|
* @li lesenseScanStartPRS - New scan is triggered by pulse on PRS channel.
|
|
*
|
|
* @param[in] start
|
|
* If true, LESENSE_ScanStart() is immediately issued after configuration.
|
|
******************************************************************************/
|
|
void LESENSE_ScanModeSet(LESENSE_ScanMode_TypeDef const scanMode,
|
|
bool const start)
|
|
{
|
|
uint32_t tmp; /* temporary storage of the CTRL register value */
|
|
|
|
|
|
/* Save the CTRL register value to tmp.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle! */
|
|
tmp = LESENSE->CTRL & ~(_LESENSE_CTRL_SCANMODE_MASK);
|
|
/* Setting the requested scanMode to the CTRL register. Casting signed int
|
|
* (enum) to unsigned long (uint32_t). */
|
|
tmp |= (uint32_t)scanMode;
|
|
|
|
/* Write the new value to the CTRL register. */
|
|
LESENSE->CTRL = tmp;
|
|
|
|
/* Start sensor scanning if requested. */
|
|
if (start)
|
|
{
|
|
LESENSE_ScanStart();
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set start delay of sensor interaction on each channel.
|
|
*
|
|
* @details
|
|
* This function sets start delay of sensor interaction on each channel.
|
|
* It can be used for adjusting the start delay while running the application
|
|
* but it is also used by LESENSE_Init() for initialization.
|
|
*
|
|
* @note
|
|
* Users can configure the start delay by LESENSE_Init() function, but only
|
|
* with a significant overhead. This simple function serves the purpose of
|
|
* controlling this parameter after the channel has been configured.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle!
|
|
*
|
|
* @param[in] startDelay
|
|
* Number of LFACLK cycles to delay. Valid range: 0-3 (2 bit).
|
|
******************************************************************************/
|
|
void LESENSE_StartDelaySet(uint8_t const startDelay)
|
|
{
|
|
uint32_t tmp; /* temporary storage of the TIMCTRL register value */
|
|
|
|
|
|
/* Sanity check of startDelay. */
|
|
EFM_ASSERT(startDelay < 4U);
|
|
|
|
/* Save the TIMCTRL register value to tmp.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle! */
|
|
tmp = LESENSE->TIMCTRL & ~(_LESENSE_TIMCTRL_STARTDLY_MASK);
|
|
/* Setting the requested startDelay to the TIMCTRL register. */
|
|
tmp |= (uint32_t)startDelay << _LESENSE_TIMCTRL_STARTDLY_SHIFT;
|
|
|
|
/* Write the new value to the TIMCTRL register. */
|
|
LESENSE->TIMCTRL = tmp;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set clock division for LESENSE timers.
|
|
*
|
|
* @details
|
|
* Use this function to configure the clock division for the LESENSE timers
|
|
* used for excitation timing.
|
|
* The division setting is global, but the clock source can be selected for
|
|
* each channel using LESENSE_ChannelConfig() function, please refer to the
|
|
* documentation of it for more details.
|
|
*
|
|
* @note
|
|
* If AUXHFRCO is used for excitation timing, LFACLK can not exceed 500kHz.
|
|
* LFACLK can not exceed 50kHz if the ACMP threshold level (ACMPTHRES) is not
|
|
* equal for all channels.
|
|
*
|
|
* @param[in] clk
|
|
* Select clock to prescale.
|
|
* @li lesenseClkHF - set AUXHFRCO clock divisor for HF timer.
|
|
* @li lesenseClkLF - set LFACLKles clock divisor for LF timer.
|
|
*
|
|
* @param[in] clkDiv
|
|
* Clock divisor value. Valid range depends on the @p clk value.
|
|
******************************************************************************/
|
|
void LESENSE_ClkDivSet(LESENSE_ChClk_TypeDef const clk,
|
|
LESENSE_ClkPresc_TypeDef const clkDiv)
|
|
{
|
|
uint32_t tmp;
|
|
|
|
|
|
/* Select clock to prescale */
|
|
switch (clk)
|
|
{
|
|
case lesenseClkHF:
|
|
{
|
|
/* Sanity check of clock divisor for HF clock. */
|
|
EFM_ASSERT((uint32_t)clkDiv <= lesenseClkDiv_8);
|
|
|
|
/* Clear current AUXPRESC settings. */
|
|
tmp = LESENSE->TIMCTRL & ~(_LESENSE_TIMCTRL_AUXPRESC_MASK);
|
|
|
|
/* Set new values in tmp while reserving other settings. */
|
|
tmp |= ((uint32_t)clkDiv << _LESENSE_TIMCTRL_AUXPRESC_SHIFT);
|
|
|
|
/* Set values in LESENSE_TIMCTRL register. */
|
|
LESENSE->TIMCTRL = tmp;
|
|
}
|
|
break;
|
|
|
|
case lesenseClkLF:
|
|
{
|
|
/* Clear current LFPRESC settings. */
|
|
tmp = LESENSE->TIMCTRL & ~(_LESENSE_TIMCTRL_LFPRESC_MASK);
|
|
|
|
/* Set new values in tmp while reserving other settings. */
|
|
tmp |= ((uint32_t)clkDiv << _LESENSE_TIMCTRL_LFPRESC_SHIFT);
|
|
|
|
/* Set values in LESENSE_TIMCTRL register. */
|
|
LESENSE->TIMCTRL = tmp;
|
|
}
|
|
break;
|
|
|
|
default:
|
|
{
|
|
EFM_ASSERT(0);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Configure all (16) LESENSE sensor channels.
|
|
*
|
|
* @details
|
|
* This function configures all the sensor channels of LESENSE interface.
|
|
* Please refer to the configuration parameter type definition
|
|
* (LESENSE_ChAll_TypeDef) for more details.
|
|
*
|
|
* @note
|
|
* Channels can be configured individually using LESENSE_ChannelConfig()
|
|
* function.
|
|
* Notice that pins used by the LESENSE module must be properly configured
|
|
* by the user explicitly, in order for the LESENSE to work as intended.
|
|
* (When configuring pins, one should remember to consider the sequence of
|
|
* configuration, in order to avoid unintended pulses/glitches on output
|
|
* pins.)
|
|
*
|
|
* @param[in] confChAll
|
|
* Configuration structure for all (16) LESENSE sensor channels.
|
|
******************************************************************************/
|
|
void LESENSE_ChannelAllConfig(LESENSE_ChAll_TypeDef const *confChAll)
|
|
{
|
|
uint32_t i;
|
|
|
|
|
|
/* Iterate through all the 16 channels */
|
|
for (i = 0U; i < 16U; ++i)
|
|
{
|
|
/* Configure scan channels. */
|
|
LESENSE_ChannelConfig(&confChAll->Ch[i], i);
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Configure a single LESENSE sensor channel.
|
|
*
|
|
* @details
|
|
* This function configures a single sensor channel of the LESENSE interface.
|
|
* Please refer to the configuration parameter type definition
|
|
* (LESENSE_ChDesc_TypeDef) for more details.
|
|
*
|
|
* @note
|
|
* This function has been designed to minimize the effects of sensor channel
|
|
* reconfiguration while LESENSE is in operation, however one shall be aware
|
|
* of these effects and the right timing of calling this function.
|
|
* Parameter @p useAltEx must be true in the channel configuration in order to
|
|
* use alternate excitation pins.
|
|
*
|
|
* @param[in] confCh
|
|
* Configuration structure for a single LESENSE sensor channel.
|
|
*
|
|
* @param[in] chIdx
|
|
* Channel index to configure (0-15).
|
|
******************************************************************************/
|
|
void LESENSE_ChannelConfig(LESENSE_ChDesc_TypeDef const *confCh,
|
|
uint32_t const chIdx)
|
|
{
|
|
uint32_t tmp; /* Service variable. */
|
|
|
|
|
|
/* Sanity check of configuration parameters */
|
|
EFM_ASSERT(chIdx < 16U);
|
|
EFM_ASSERT(confCh->exTime < 64U);
|
|
EFM_ASSERT(confCh->sampleDelay < 128U);
|
|
EFM_ASSERT(confCh->measDelay < 128U);
|
|
/* Not a complete assert, as the max. value of acmpThres depends on other
|
|
* configuration parameters, check the parameter description of acmpThres for
|
|
* for more details! */
|
|
EFM_ASSERT(confCh->acmpThres < 4096U);
|
|
EFM_ASSERT(!(confCh->chPinExMode == lesenseChPinExDACOut &&
|
|
(chIdx != 2U) && (chIdx != 3U) && (chIdx != 4U) && (chIdx != 5U)));
|
|
EFM_ASSERT(!(confCh->chPinIdleMode == lesenseChPinIdleDACCh1 &&
|
|
((chIdx != 12U) && (chIdx != 13U) && (chIdx != 14U) && (chIdx != 15U))));
|
|
EFM_ASSERT(!(confCh->chPinIdleMode == lesenseChPinIdleDACCh0 &&
|
|
((chIdx != 0U) && (chIdx != 1U) && (chIdx != 2U) && (chIdx != 3U))));
|
|
|
|
|
|
/* Configure chIdx setup in LESENSE idle phase.
|
|
* Read-modify-write in order to support reconfiguration during LESENSE
|
|
* operation. */
|
|
tmp = (LESENSE->IDLECONF & ~((uint32_t)0x3UL << (chIdx * 2UL)));
|
|
tmp |= ((uint32_t)confCh->chPinIdleMode << (chIdx * 2UL));
|
|
LESENSE->IDLECONF = tmp;
|
|
|
|
/* Channel specific timing configuration on scan channel chIdx.
|
|
* Set excitation time, sampling delay, measurement delay. */
|
|
LESENSE_ChannelTimingSet(chIdx,
|
|
(uint32_t)confCh->exTime,
|
|
(uint32_t)confCh->sampleDelay,
|
|
(uint32_t)confCh->measDelay);
|
|
|
|
/* Channel specific configuration of clocks, sample mode, excitation pin mode
|
|
* alternate excitation usage and interrupt mode on scan channel chIdx in
|
|
* LESENSE_CHchIdx_INTERACT. */
|
|
LESENSE->CH[chIdx].INTERACT = ((uint32_t)confCh->exClk <<
|
|
_LESENSE_CH_INTERACT_EXCLK_SHIFT) |
|
|
((uint32_t)confCh->sampleClk <<
|
|
_LESENSE_CH_INTERACT_SAMPLECLK_SHIFT) |
|
|
(uint32_t)confCh->sampleMode |
|
|
(uint32_t)confCh->intMode |
|
|
(uint32_t)confCh->chPinExMode |
|
|
((uint32_t)confCh->useAltEx <<
|
|
_LESENSE_CH_INTERACT_ALTEX_SHIFT);
|
|
|
|
/* Configure channel specific counter comparison mode, optional result
|
|
* forwarding to decoder, optional counter value storing and optional result
|
|
* inverting on scan channel chIdx in LESENSE_CHchIdx_EVAL. */
|
|
LESENSE->CH[chIdx].EVAL = (uint32_t)confCh->compMode |
|
|
((uint32_t)confCh->shiftRes <<
|
|
_LESENSE_CH_EVAL_DECODE_SHIFT) |
|
|
((uint32_t)confCh->storeCntRes <<
|
|
_LESENSE_CH_EVAL_STRSAMPLE_SHIFT) |
|
|
((uint32_t)confCh->invRes <<
|
|
_LESENSE_CH_EVAL_SCANRESINV_SHIFT);
|
|
|
|
/* Configure analog comparator (ACMP) threshold and decision threshold for
|
|
* counter separately with the function provided for that. */
|
|
LESENSE_ChannelThresSet(chIdx,
|
|
(uint32_t)confCh->acmpThres,
|
|
(uint32_t)confCh->cntThres);
|
|
|
|
/* Enable/disable interrupts on channel.
|
|
* Note: BITBAND_Peripheral() function is used for setting/clearing single
|
|
* bit peripheral register bitfields. Read the function description in
|
|
* efm32_bitband.h for more details. */
|
|
BITBAND_Peripheral(&(LESENSE->IEN),
|
|
(uint32_t)chIdx,
|
|
(uint32_t)confCh->enaInt);
|
|
|
|
/* Enable/disable CHchIdx pin. */
|
|
BITBAND_Peripheral(&(LESENSE->ROUTE),
|
|
(uint32_t)chIdx,
|
|
(uint32_t)confCh->enaPin);
|
|
|
|
/* Enable/disable scan channel chIdx. */
|
|
BITBAND_Peripheral(&(LESENSE->CHEN),
|
|
(uint32_t)chIdx,
|
|
(uint32_t)confCh->enaScanCh);
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Configure the LESENSE alternate excitation pins.
|
|
*
|
|
* @details
|
|
* This function configures the alternate excitation channels of the LESENSE
|
|
* interface. Please refer to the configuration parameter type definition
|
|
* (LESENSE_ConfAltEx_TypeDef) for more details.
|
|
*
|
|
* @note
|
|
* Parameter @p useAltEx must be true in the channel configuration structrure
|
|
* (LESENSE_ChDesc_TypeDef) in order to use alternate excitation pins on the
|
|
* channel.
|
|
*
|
|
* @param[in] confAltEx
|
|
* Configuration structure for LESENSE alternate excitation pins.
|
|
******************************************************************************/
|
|
void LESENSE_AltExConfig(LESENSE_ConfAltEx_TypeDef const *confAltEx)
|
|
{
|
|
uint32_t i;
|
|
uint32_t tmp;
|
|
|
|
|
|
/* Configure alternate excitation mapping.
|
|
* Atomic read-modify-write using BITBAND_Peripheral function in order to
|
|
* support reconfiguration during LESENSE operation. */
|
|
BITBAND_Peripheral(&(LESENSE->CTRL),
|
|
_LESENSE_CTRL_ALTEXMAP_SHIFT,
|
|
(uint32_t)confAltEx->altExMap);
|
|
|
|
/* Iterate through all the 8 alternate excitation channels */
|
|
for (i = 0U; i < 8U; ++i)
|
|
{
|
|
/* Enable/disable alternate excitation pin i.
|
|
* Atomic read-modify-write using BITBAND_Peripheral function in order to
|
|
* support reconfiguration during LESENSE operation. */
|
|
BITBAND_Peripheral(&(LESENSE->ROUTE),
|
|
(16UL + i),
|
|
(uint32_t)confAltEx->AltEx[i].enablePin);
|
|
|
|
/* Setup the idle phase state of alternate excitation pin i.
|
|
* Read-modify-write in order to support reconfiguration during LESENSE
|
|
* operation. */
|
|
tmp = (LESENSE->ALTEXCONF & ~((uint32_t)0x3UL << (i * 2UL)));
|
|
tmp |= ((uint32_t)confAltEx->AltEx[i].idleConf << (i * 2UL));
|
|
LESENSE->ALTEXCONF = tmp;
|
|
|
|
/* Enable/disable always excite on channel i */
|
|
BITBAND_Peripheral(&(LESENSE->ALTEXCONF),
|
|
(16UL + i),
|
|
(uint32_t)confAltEx->AltEx[i].alwaysEx);
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Enable/disable LESENSE scan channel and the pin assigned to it.
|
|
*
|
|
* @details
|
|
* Use this function to enable/disable a selected LESENSE scan channel and the
|
|
* pin assigned to.
|
|
*
|
|
* @note
|
|
* Users can enable/disable scan channels and the channel pin by
|
|
* LESENSE_ChannelConfig() function, but only with a significant overhead.
|
|
* This simple function serves the purpose of controlling these parameters
|
|
* after the channel has been configured.
|
|
*
|
|
* @param[in] chIdx
|
|
* Identifier of the scan channel. Valid range: 0-15.
|
|
*
|
|
* @param[in] enaScanCh
|
|
* Enable/disable the selected scan channel by setting this parameter to
|
|
* true/false respectively.
|
|
*
|
|
* @param[in] enaPin
|
|
* Enable/disable the pin assigned to the channel selected by @p chIdx.
|
|
******************************************************************************/
|
|
void LESENSE_ChannelEnable(uint8_t const chIdx,
|
|
bool const enaScanCh,
|
|
bool const enaPin)
|
|
{
|
|
/* Enable/disable the assigned pin of scan channel chIdx.
|
|
* Note: BITBAND_Peripheral() function is used for setting/clearing single
|
|
* bit peripheral register bitfields. Read the function description in
|
|
* efm32_bitband.h for more details. */
|
|
BITBAND_Peripheral(&(LESENSE->ROUTE),
|
|
(uint32_t)chIdx,
|
|
(uint32_t)enaPin);
|
|
|
|
/* Enable/disable scan channel chIdx. */
|
|
BITBAND_Peripheral(&(LESENSE->CHEN),
|
|
(uint32_t)chIdx,
|
|
(uint32_t)enaScanCh);
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Enable/disable LESENSE scan channel and the pin assigned to it.
|
|
*
|
|
* @details
|
|
* Use this function to enable/disable LESENSE scan channels and the pins
|
|
* assigned to them using a mask.
|
|
*
|
|
* @note
|
|
* Users can enable/disable scan channels and channel pins by using
|
|
* LESENSE_ChannelAllConfig() function, but only with a significant overhead.
|
|
* This simple function serves the purpose of controlling these parameters
|
|
* after the channel has been configured.
|
|
*
|
|
* @param[in] chMask
|
|
* Set the corresponding bit to 1 to enable, 0 to disable the selected scan
|
|
* channel.
|
|
*
|
|
* @param[in] pinMask
|
|
* Set the corresponding bit to 1 to enable, 0 to disable the pin on selected
|
|
* channel.
|
|
******************************************************************************/
|
|
void LESENSE_ChannelEnableMask(uint16_t chMask, uint16_t pinMask)
|
|
{
|
|
/* Enable/disable all channels at once according to the mask. */
|
|
LESENSE->CHEN = chMask;
|
|
/* Enable/disable all channel pins at once according to the mask. */
|
|
LESENSE->ROUTE = pinMask;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set LESENSE channel timing parameters.
|
|
*
|
|
* @details
|
|
* Use this function to set timing parameters on a selected LESENSE channel.
|
|
*
|
|
* @note
|
|
* Users can configure the channel timing parameters by
|
|
* LESENSE_ChannelConfig() function, but only with a significant overhead.
|
|
* This simple function serves the purpose of controlling these parameters
|
|
* after the channel has been configured.
|
|
*
|
|
* @param[in] chIdx
|
|
* Identifier of the scan channel. Valid range: 0-15.
|
|
*
|
|
* @param[in] exTime
|
|
* Excitation time on chIdx. Excitation will last exTime+1 excitation clock
|
|
* cycles. Valid range: 0-63 (6 bits).
|
|
*
|
|
* @param[in] sampleDelay
|
|
* Sample delay on chIdx. Sampling will occur after sampleDelay+1 sample clock
|
|
* cycles. Valid range: 0-127 (7 bits).
|
|
*
|
|
* @param[in] measDelay
|
|
* Measure delay on chIdx. Sensor measuring is delayed for measDelay+1
|
|
* excitation clock cycles. Valid range: 0-127 (7 bits).
|
|
******************************************************************************/
|
|
void LESENSE_ChannelTimingSet(uint8_t const chIdx,
|
|
uint8_t const exTime,
|
|
uint8_t const sampleDelay,
|
|
uint8_t const measDelay)
|
|
{
|
|
/* Sanity check of parameters. */
|
|
EFM_ASSERT(exTime < 64U);
|
|
EFM_ASSERT(sampleDelay < 128U);
|
|
EFM_ASSERT(measDelay < 128U);
|
|
|
|
/* Channel specific timing configuration on scan channel chIdx.
|
|
* Setting excitation time, sampling delay, measurement delay. */
|
|
LESENSE->CH[chIdx].TIMING = ((uint32_t)exTime <<
|
|
_LESENSE_CH_TIMING_EXTIME_SHIFT) |
|
|
((uint32_t)sampleDelay <<
|
|
_LESENSE_CH_TIMING_SAMPLEDLY_SHIFT) |
|
|
((uint32_t)measDelay <<
|
|
_LESENSE_CH_TIMING_MEASUREDLY_SHIFT);
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set LESENSE channel threshold parameters.
|
|
*
|
|
* @details
|
|
* Use this function to set threshold parameters on a selected LESENSE
|
|
* channel.
|
|
*
|
|
* @note
|
|
* Users can configure the channel threshold parameters by
|
|
* LESENSE_ChannelConfig() function, but only with a significant overhead.
|
|
* This simple function serves the purpose of controlling these parameters
|
|
* after the channel has been configured.
|
|
*
|
|
* @param[in] chIdx
|
|
* Identifier of the scan channel. Valid range: 0-15.
|
|
*
|
|
* @param[in] acmpThres
|
|
* ACMP threshold.
|
|
* @li If perCtrl.dacCh0Data or perCtrl.dacCh1Data is set to
|
|
* #lesenseDACIfData, acmpThres defines the 12-bit DAC data in the
|
|
* corresponding data register of the DAC interface (DACn_CH0DATA and
|
|
* DACn_CH1DATA). In this case, the valid range is: 0-4095 (12 bits).
|
|
*
|
|
* @li If perCtrl.dacCh0Data or perCtrl.dacCh1Data is set to
|
|
* #lesenseACMPThres, acmpThres defines the 6-bit Vdd scaling factor of ACMP
|
|
* negative input (VDDLEVEL in ACMP_INPUTSEL register). In this case, the
|
|
* valid range is: 0-63 (6 bits).
|
|
*
|
|
* @param[in] cntThres
|
|
* Decision threshold for counter comparison.
|
|
* Valid range: 0-65535 (16 bits).
|
|
******************************************************************************/
|
|
void LESENSE_ChannelThresSet(uint8_t const chIdx,
|
|
uint16_t const acmpThres,
|
|
uint16_t const cntThres)
|
|
{
|
|
uint32_t tmp; /* temporary storage */
|
|
|
|
|
|
/* Sanity check for acmpThres only, cntThres is 16bit value. */
|
|
EFM_ASSERT(acmpThres < 4096U);
|
|
/* Sanity check for LESENSE channel id. */
|
|
EFM_ASSERT(chIdx < 16);
|
|
|
|
/* Save the INTERACT register value of channel chIdx to tmp.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle! */
|
|
tmp = LESENSE->CH[chIdx].INTERACT & ~(_LESENSE_CH_INTERACT_ACMPTHRES_MASK);
|
|
/* Set the ACMP threshold value to the INTERACT register of channel chIdx. */
|
|
tmp |= (uint32_t)acmpThres << _LESENSE_CH_INTERACT_ACMPTHRES_SHIFT;
|
|
/* Write the new value to the INTERACT register. */
|
|
LESENSE->CH[chIdx].INTERACT = tmp;
|
|
|
|
/* Save the EVAL register value of channel chIdx to tmp.
|
|
* Please be aware the effects of the non-atomic Read-Modify-Write cycle! */
|
|
tmp = LESENSE->CH[chIdx].EVAL & ~(_LESENSE_CH_EVAL_COMPTHRES_MASK);
|
|
/* Set the counter threshold value to the INTERACT register of channel chIdx. */
|
|
tmp |= (uint32_t)cntThres << _LESENSE_CH_EVAL_COMPTHRES_SHIFT;
|
|
/* Write the new value to the EVAL register. */
|
|
LESENSE->CH[chIdx].EVAL = tmp;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Configure all LESENSE decoder states.
|
|
*
|
|
* @details
|
|
* This function configures all the decoder states of the LESENSE interface.
|
|
* Please refer to the configuration parameter type definition
|
|
* (LESENSE_DecStAll_TypeDef) for more details.
|
|
*
|
|
* @note
|
|
* Decoder states can be configured individually using
|
|
* LESENSE_DecoderStateConfig() function.
|
|
*
|
|
* @param[in] confDecStAll
|
|
* Configuration structure for all (16) LESENSE decoder states.
|
|
******************************************************************************/
|
|
void LESENSE_DecoderStateAllConfig(LESENSE_DecStAll_TypeDef const *confDecStAll)
|
|
{
|
|
uint32_t i;
|
|
|
|
|
|
/* Iterate through all the 16 decoder states. */
|
|
for (i = 0U; i < 16U; ++i)
|
|
{
|
|
/* Configure decoder state i. */
|
|
LESENSE_DecoderStateConfig(&confDecStAll->St[i], i);
|
|
}
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Configure a single LESENSE decoder state.
|
|
*
|
|
* @details
|
|
* This function configures a single decoder state of the LESENSE interface.
|
|
* Please refer to the configuration parameter type definition
|
|
* (LESENSE_DecStDesc_TypeDef) for more details.
|
|
*
|
|
* @param[in] confDecSt
|
|
* Configuration structure for a single LESENSE decoder state.
|
|
*
|
|
* @param[in] decSt
|
|
* Decoder state index to configure (0-15).
|
|
******************************************************************************/
|
|
void LESENSE_DecoderStateConfig(LESENSE_DecStDesc_TypeDef const *confDecSt,
|
|
uint32_t const decSt)
|
|
{
|
|
/* Sanity check of configuration parameters */
|
|
EFM_ASSERT(decSt < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confA.compMask < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confA.compVal < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confA.nextState < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confB.compMask < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confB.compVal < 16U);
|
|
EFM_ASSERT((uint32_t)confDecSt->confB.nextState < 16U);
|
|
|
|
/* Configure state descriptor A (LESENSE_STi_TCONFA) for decoder state i.
|
|
* Setting sensor compare value, sensor mask, next state index,
|
|
* transition action, interrupt flag option and state descriptor chaining
|
|
* configurations. */
|
|
LESENSE->ST[decSt].TCONFA = (uint32_t)confDecSt->confA.prsAct |
|
|
((uint32_t)confDecSt->confA.compMask <<
|
|
_LESENSE_ST_TCONFA_MASK_SHIFT) |
|
|
((uint32_t)confDecSt->confA.compVal <<
|
|
_LESENSE_ST_TCONFA_COMP_SHIFT) |
|
|
((uint32_t)confDecSt->confA.nextState <<
|
|
_LESENSE_ST_TCONFA_NEXTSTATE_SHIFT) |
|
|
((uint32_t)confDecSt->confA.setInt <<
|
|
_LESENSE_ST_TCONFA_SETIF_SHIFT) |
|
|
((uint32_t)confDecSt->chainDesc <<
|
|
_LESENSE_ST_TCONFA_CHAIN_SHIFT);
|
|
|
|
/* Configure state descriptor Bi (LESENSE_STi_TCONFB).
|
|
* Setting sensor compare value, sensor mask, next state index, transition
|
|
* action and interrupt flag option configurations. */
|
|
LESENSE->ST[decSt].TCONFB = (uint32_t)confDecSt->confB.prsAct |
|
|
((uint32_t)confDecSt->confB.compMask <<
|
|
_LESENSE_ST_TCONFB_MASK_SHIFT) |
|
|
((uint32_t)confDecSt->confB.compVal <<
|
|
_LESENSE_ST_TCONFB_COMP_SHIFT) |
|
|
((uint32_t)confDecSt->confB.nextState <<
|
|
_LESENSE_ST_TCONFB_NEXTSTATE_SHIFT) |
|
|
((uint32_t)confDecSt->confB.setInt <<
|
|
_LESENSE_ST_TCONFB_SETIF_SHIFT);
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Set LESENSE decoder state.
|
|
*
|
|
* @details
|
|
* This function can be used for setting the initial state of the LESENSE
|
|
* decoder.
|
|
*
|
|
* @note
|
|
* Make sure the LESENSE decoder state is initialized by this function before
|
|
* enabling the decoder!
|
|
*
|
|
* @param[in] decSt
|
|
* Decoder state to set as current state. Valid range: 0-15
|
|
******************************************************************************/
|
|
void LESENSE_DecoderStateSet(uint32_t decSt)
|
|
{
|
|
EFM_ASSERT(decSt < 16U);
|
|
|
|
LESENSE->DECSTATE = decSt & _LESENSE_DECSTATE_DECSTATE_MASK;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Get the current state of the LESENSE decoder.
|
|
*
|
|
* @return
|
|
* This function returns the value of LESENSE_DECSTATE register that
|
|
* represents the current state of the LESENSE decoder.
|
|
******************************************************************************/
|
|
uint32_t LESENSE_DecoderStateGet(void)
|
|
{
|
|
return LESENSE->DECSTATE & _LESENSE_DECSTATE_DECSTATE_MASK;
|
|
}
|
|
|
|
|
|
/***************************************************************************//**
|
|
* @brief
|
|
* Reset the LESENSE module.
|
|
*
|
|
* @details
|
|
* Use this function to reset the LESENSE registers.
|
|
*
|
|
* @note
|
|
* Resetting LESENSE registers is required in each reset or power-on cycle in
|
|
* order to configure the default values of the RAM mapped LESENSE registers.
|
|
* LESENSE_Reset() can be called on initialization by setting the @p reqReset
|
|
* parameter to true in LESENSE_Init().
|
|
******************************************************************************/
|
|
void LESENSE_Reset(void)
|
|
{
|
|
uint32_t i;
|
|
|
|
|
|
/* Disable all LESENSE interrupts first */
|
|
LESENSE->IEN = _LESENSE_IEN_RESETVALUE;
|
|
|
|
/* Clear all pending LESENSE interrupts */
|
|
LESENSE->IFC = _LESENSE_IFC_MASK;
|
|
|
|
/* Stop the decoder */
|
|
LESENSE->DECCTRL |= LESENSE_DECCTRL_DISABLE;
|
|
|
|
/* Stop sensor scan and clear result buffer */
|
|
LESENSE->CMD = (LESENSE_CMD_STOP | LESENSE_CMD_CLEARBUF);
|
|
|
|
/* Reset LESENSE configuration registers */
|
|
LESENSE->CTRL = _LESENSE_CTRL_RESETVALUE;
|
|
LESENSE->PERCTRL = _LESENSE_PERCTRL_RESETVALUE;
|
|
LESENSE->DECCTRL = _LESENSE_DECCTRL_RESETVALUE;
|
|
LESENSE->BIASCTRL = _LESENSE_BIASCTRL_RESETVALUE;
|
|
LESENSE->CHEN = _LESENSE_CHEN_RESETVALUE;
|
|
LESENSE->IDLECONF = _LESENSE_IDLECONF_RESETVALUE;
|
|
LESENSE->ALTEXCONF = _LESENSE_ALTEXCONF_RESETVALUE;
|
|
|
|
/* Disable LESENSE to control GPIO pins */
|
|
LESENSE->ROUTE = _LESENSE_ROUTE_RESETVALUE;
|
|
|
|
/* Reset all channel configuration registers */
|
|
for (i = 0U; i < 16U; ++i)
|
|
{
|
|
LESENSE->CH[i].TIMING = _LESENSE_CH_TIMING_RESETVALUE;
|
|
LESENSE->CH[i].INTERACT = _LESENSE_CH_INTERACT_RESETVALUE;
|
|
LESENSE->CH[i].EVAL = _LESENSE_CH_EVAL_RESETVALUE;
|
|
}
|
|
|
|
/* Reset all decoder state configuration registers */
|
|
for (i = 0U; i < 16U; ++i)
|
|
{
|
|
LESENSE->ST[i].TCONFA = _LESENSE_ST_TCONFA_RESETVALUE;
|
|
LESENSE->ST[i].TCONFB = _LESENSE_ST_TCONFB_RESETVALUE;
|
|
}
|
|
}
|
|
|
|
|
|
/** @} (end addtogroup LESENSE) */
|
|
/** @} (end addtogroup EM_Library) */
|
|
|
|
#endif /* defined(LESENSE_COUNT) && (LESENSE_COUNT > 0) */
|