rt-thread/bsp/hc32f4a0/Libraries/HC32F4A0_StdPeriph_Driver/inc/hc32f4a0_sdioc.h

754 lines
46 KiB
C

/**
*******************************************************************************
* @file hc32f4a0_sdioc.h
* @brief This file contains all the functions prototypes of the SDIOC driver
* library.
@verbatim
Change Logs:
Date Author Notes
2020-06-12 Yangjp First version
@endverbatim
*******************************************************************************
* Copyright (C) 2020, Huada Semiconductor Co., Ltd. All rights reserved.
*
* This software component is licensed by HDSC under BSD 3-Clause license
* (the "License"); You may not use this file except in compliance with the
* License. You may obtain a copy of the License at:
* opensource.org/licenses/BSD-3-Clause
*
*******************************************************************************
*/
#ifndef __HC32F4A0_SDIOC_H__
#define __HC32F4A0_SDIOC_H__
/* C binding of definitions if building with C++ compiler */
#ifdef __cplusplus
extern "C"
{
#endif
/*******************************************************************************
* Include files
******************************************************************************/
#include "hc32_common.h"
#include "ddl_config.h"
/**
* @addtogroup HC32F4A0_DDL_Driver
* @{
*/
/**
* @addtogroup DDL_SDIOC
* @{
*/
#if (DDL_SDIOC_ENABLE == DDL_ON)
/*******************************************************************************
* Global type definitions ('typedef')
******************************************************************************/
/**
* @defgroup SDIOC_Global_Types SDIOC Global Types
* @{
*/
/**
* @brief SDIOC Init structure definition
*/
typedef struct
{
uint32_t u32Mode; /*!< Specifies the SDIOC work mode.
This parameter can be a value of @ref SDIOC_Mode */
uint8_t u8CardDetectSelect; /*!< Specifies the SDIOC card detect source select.
This parameter can be a value of @ref SDIOC_Card_Detect_Select */
uint8_t u8SpeedMode; /*!< Specifies the SDIOC speed mode.
This parameter can be a value of @ref SDIOC_Speed_Mode */
uint8_t u8BusWidth; /*!< Specifies the SDIOC bus width.
This parameter can be a value of @ref SDIOC_Bus_Width */
uint16_t u16ClockDiv; /*!< Specifies the SDIOC clock division.
This parameter can be a value of @ref SDIOC_Clock_Division */
} stc_sdioc_init_t;
/**
* @brief SDIOC Command Init structure definition
*/
typedef struct
{
uint32_t u32Argument; /*!< Specifies the SDIOC command argument. */
uint16_t u16CmdIndex; /*!< Specifies the SDIOC command index.
This parameter must be a number between Min_Data = 0 and Max_Data = 63 */
uint16_t u16CmdType; /*!< Specifies the SDIOC command type.
This parameter can be a value of @ref SDIOC_Command_Type */
uint16_t u16DataLineEn; /*!< Specifies whether SDIOC uses data lines in current command.
This parameter can be a value of @ref SDIOC_Data_Line_Valid */
uint16_t u16RespType; /*!< Specifies the SDIOC response type.
This parameter can be a value of @ref SDIOC_Response_Type */
} stc_sdioc_cmd_init_t;
/**
* @brief SDIOC Data Init structure definition
*/
typedef struct
{
uint16_t u16BlockSize; /*!< Specifies the SDIOC data block size.
This parameter must be a number between Min_Data = 1 and Max_Data = 512 */
uint16_t u16BlockCount; /*!< Specifies the SDIOC data block count.
This parameter must be a number between Min_Data = 0 and Max_Data = 0xFFFF */
uint16_t u16TransferDir; /*!< Specifies the SDIOC data transfer direction.
This parameter can be a value of @ref SDIOC_Transfer_Direction */
uint16_t u16AutoCMD12En; /*!< Specifies the validity of the SDIOC Auto Send CMD12.
This parameter can be a value of @ref SDIOC_Auto_Send_CMD12 */
uint16_t u16TransferMode; /*!< Specifies the SDIOC data transfer mode.
This parameter can be a value of @ref SDIOC_Transfer_Mode */
uint8_t u16DataTimeout; /*!< Specifies the SDIOC data timeout time.
This parameter can be a value of @ref SDIOC_Data_Timeout_Time */
} stc_sdioc_data_init_t;
/**
* @}
*/
/*******************************************************************************
* Global pre-processor symbols/macros ('#define')
******************************************************************************/
/**
* @defgroup SDIOC_Global_Macros SDIOC Global Macros
* @{
*/
/**
* @defgroup SDIOC_Mode SDIOC Mode
* @{
*/
#define SDIOC_MODE_SD (0x00UL) /*!< SDIOCx selects SD mode */
#define SDIOC_MODE_MMC (0x01UL) /*!< SDIOCx selects MMC mode */
/**
* @}
*/
/**
* @defgroup SDIOC_Card_Detect_Select SDIOC Card Detect Select
* @{
*/
#define SDIOC_CARD_DETECT_CD_PIN_LEVEL (0x00U) /*!< SDIOCx_CD(x=1~2) line is selected (for normal use) */
#define SDIOC_CARD_DETECT_TEST_SIGNAL (SDIOC_HOSTCON_CDSS) /*!< The Card Detect Test Level is selected(for test purpose) */
/**
* @}
*/
/**
* @defgroup SDIOC_Card_Detect_Test_Level SDIOC Card Detect Test Level
* @{
*/
#define SDIOC_CARD_DETECT_TEST_LEVEL_LOW (0x00U) /*!< Card identification test signal is low level (with device insertion) */
#define SDIOC_CARD_DETECT_TEST_LEVEL_HIGH (SDIOC_HOSTCON_CDTL) /*!< Card identification test signal is high level (no device insertion) */
/**
* @}
*/
/**
* @defgroup SDIOC_Speed_Mode SDIOC Speed Mode
* @{
*/
#define SDIOC_SPEED_MODE_NORMAL (0x00U) /*!< Normal speed mode */
#define SDIOC_SPEED_MODE_HIGH (SDIOC_HOSTCON_HSEN) /*!< High speed mode */
/**
* @}
*/
/**
* @defgroup SDIOC_Bus_Width SDIOC Bus Width
* @{
*/
#define SDIOC_BUS_WIDTH_1BIT (0x00U) /*!< The Bus width is 1 bit */
#define SDIOC_BUS_WIDTH_4BIT (SDIOC_HOSTCON_DW) /*!< The Bus width is 4 bit */
#define SDIOC_BUS_WIDTH_8BIT (SDIOC_HOSTCON_EXDW) /*!< The Bus width is 8 bit */
/**
* @}
*/
/**
* @defgroup SDIOC_Clock_Division SDIOC Clock Division
* @{
*/
#define SDIOC_CLOCK_DIV_1 (0x00U) /*!< PCLK1/1 */
#define SDIOC_CLOCK_DIV_2 (SDIOC_CLKCON_FS_0) /*!< PCLK1/2 */
#define SDIOC_CLOCK_DIV_4 (SDIOC_CLKCON_FS_1) /*!< PCLK1/4 */
#define SDIOC_CLOCK_DIV_8 (SDIOC_CLKCON_FS_2) /*!< PCLK1/8 */
#define SDIOC_CLOCK_DIV_16 (SDIOC_CLKCON_FS_3) /*!< PCLK1/16 */
#define SDIOC_CLOCK_DIV_32 (SDIOC_CLKCON_FS_4) /*!< PCLK1/32 */
#define SDIOC_CLOCK_DIV_64 (SDIOC_CLKCON_FS_5) /*!< PCLK1/64 */
#define SDIOC_CLOCK_DIV_128 (SDIOC_CLKCON_FS_6) /*!< PCLK1/128 */
#define SDIOC_CLOCK_DIV_256 (SDIOC_CLKCON_FS_7) /*!< PCLK1/256 */
/**
* @}
*/
/**
* @defgroup SDIOC_Command_Type SDIOC Command Type
* @{
*/
#define SDIOC_CMD_TYPE_NORMAL (0x00U) /*!< Other commands */
#define SDIOC_CMD_TYPE_SUSPEND (SDIOC_CMD_TYP_0) /*!< CMD52 for writing "Bus Suspend" in CCCR */
#define SDIOC_CMD_TYPE_RESUME (SDIOC_CMD_TYP_1) /*!< CMD52 for writing "Function Select" in CCCR */
#define SDIOC_CMD_TYPE_ABORT (SDIOC_CMD_TYP) /*!< CMD12, CMD52 for writing "I/O Abort" in CCCR */
/**
* @}
*/
/**
* @defgroup SDIOC_Data_Line_Valid SDIOC Data Line Valid
* @{
*/
#define SDIOC_DATA_LINE_DISABLE (0x00U) /*!< The current command uses only SDIOCx_CMD(x=1~2) command line */
#define SDIOC_DATA_LINE_ENABLE (SDIOC_CMD_DAT) /*!< The current command requires the use of SDIOCx_Dy(x=1~2) data line */
/**
* @}
*/
/**
* @defgroup SDIOC_Transfer_Direction SDIOC Transfer Direction
* @{
*/
#define SDIOC_TRANSFER_DIR_TO_CARD (0x00U) /*!< Write (Host to Card) */
#define SDIOC_TRANSFER_DIR_TO_HOST (SDIOC_TRANSMODE_DDIR) /*!< Read (Card to Host) */
/**
* @}
*/
/**
* @defgroup SDIOC_Auto_Send_CMD12 SDIOC Auto Send CMD12
* @{
*/
#define SDIOC_AUTO_SEND_CMD12_DISABLE (0x00U) /*!< Do not send autocommands */
#define SDIOC_AUTO_SEND_CMD12_ENABLE (SDIOC_TRANSMODE_ATCEN_0) /*!< CMD12 is automatically sent after multiple block transfers */
/**
* @}
*/
/**
* @defgroup SDIOC_Transfer_Mode SDIOC Transfer Mode
* @{
*/
#define SDIOC_TRANSFER_MODE_SINGLE (0x00U) /*!< Single Block transfer */
#define SDIOC_TRANSFER_MODE_INFINITE (SDIOC_TRANSMODE_MULB) /*!< Infinite Block transfer */
#define SDIOC_TRANSFER_MODE_MULTIPLE (SDIOC_TRANSMODE_MULB | SDIOC_TRANSMODE_BCE) /*!< Multiple Block transfer */
#define SDIOC_TRANSFER_MODE_STOP_MULTIPLE (0x8000U | SDIOC_TRANSFER_MODE_MULTIPLE) /*!< Stop Multiple Block transfer */
/**
* @}
*/
/**
* @defgroup SDIOC_Data_Timeout_Time SDIOC Data Timeout Time
* @{
*/
#define SDIOC_DATA_TIMEOUT_CLK_2_13 (0x00U) /*!< Timeout time: PCLK1*2^13 */
#define SDIOC_DATA_TIMEOUT_CLK_2_14 (0x01U) /*!< Timeout time: PCLK1*2^14 */
#define SDIOC_DATA_TIMEOUT_CLK_2_15 (0x02U) /*!< Timeout time: PCLK1*2^15 */
#define SDIOC_DATA_TIMEOUT_CLK_2_16 (0x03U) /*!< Timeout time: PCLK1*2^16 */
#define SDIOC_DATA_TIMEOUT_CLK_2_17 (0x04U) /*!< Timeout time: PCLK1*2^17 */
#define SDIOC_DATA_TIMEOUT_CLK_2_18 (0x05U) /*!< Timeout time: PCLK1*2^18 */
#define SDIOC_DATA_TIMEOUT_CLK_2_19 (0x06U) /*!< Timeout time: PCLK1*2^19 */
#define SDIOC_DATA_TIMEOUT_CLK_2_20 (0x07U) /*!< Timeout time: PCLK1*2^20 */
#define SDIOC_DATA_TIMEOUT_CLK_2_21 (0x08U) /*!< Timeout time: PCLK1*2^21 */
#define SDIOC_DATA_TIMEOUT_CLK_2_22 (0x09U) /*!< Timeout time: PCLK1*2^22 */
#define SDIOC_DATA_TIMEOUT_CLK_2_23 (0x0AU) /*!< Timeout time: PCLK1*2^23 */
#define SDIOC_DATA_TIMEOUT_CLK_2_24 (0x0BU) /*!< Timeout time: PCLK1*2^24 */
#define SDIOC_DATA_TIMEOUT_CLK_2_25 (0x0CU) /*!< Timeout time: PCLK1*2^25 */
#define SDIOC_DATA_TIMEOUT_CLK_2_26 (0x0DU) /*!< Timeout time: PCLK1*2^26 */
#define SDIOC_DATA_TIMEOUT_CLK_2_27 (0x0EU) /*!< Timeout time: PCLK1*2^27 */
/**
* @}
*/
/**
* @defgroup SDIOC_Response_Register SDIOC Response Register
* @{
*/
#define SDIOC_RESPONSE_REG_BIT0_31 (0x00U) /*!< Command Response Register 0-31bit */
#define SDIOC_RESPONSE_REG_BIT32_63 (0x04U) /*!< Command Response Register 32-63bit */
#define SDIOC_RESPONSE_REG_BIT64_95 (0x08U) /*!< Command Response Register 64-95bit */
#define SDIOC_RESPONSE_REG_BIT96_127 (0x0CU) /*!< Command Response Register 96-127bit */
/**
* @}
*/
/**
* @defgroup SDIOC_Software_Reset_Type SDIOC_Software_Reset_Type
* @{
*/
#define SDIOC_SW_RESET_DATA_LINE (SDIOC_SFTRST_RSTD) /*!< Only part of data circuit is reset */
#define SDIOC_SW_RESET_CMD_LINE (SDIOC_SFTRST_RSTC) /*!< Only part of command circuit is reset */
#define SDIOC_SW_RESET_ALL (SDIOC_SFTRST_RSTA) /*!< Reset the entire Host Controller except for the card detection circuit */
/**
* @}
*/
/**
* @defgroup SDIOC_Output_Clock_Frequency SDIOC Output Clock Frequency
* @{
*/
#define SDIOC_OUTPUT_CLK_FREQ_400K (400000UL) /*!< SDIOC clock: 400KHz */
#define SDIOC_OUTPUT_CLK_FREQ_25M (25000000UL) /*!< SDIOC clock: 25MHz */
#define SDIOC_OUTPUT_CLK_FREQ_26M (26000000UL) /*!< SDIOC clock: 26MHz */
#define SDIOC_OUTPUT_CLK_FREQ_50M (50000000UL) /*!< SDIOC clock: 50MHz */
#define SDIOC_OUTPUT_CLK_FREQ_52M (52000000UL) /*!< SDIOC clock: 52MHz */
/**
* @}
*/
/**
* @defgroup SDIOC_Host_Status SDIOC Host Status
* @{
*/
#define SDIOC_HOST_FLAG_CMDL (SDIOC_PSTAT_CMDL) /*!< CMD Line Level status */
#define SDIOC_HOST_FLAG_DATL (SDIOC_PSTAT_DATL) /*!< DAT[3:0] Line Level status */
#define SDIOC_HOST_FLAG_DATL_D0 (SDIOC_PSTAT_DATL_0) /*!< DAT[0] Line Level status */
#define SDIOC_HOST_FLAG_DATL_D1 (SDIOC_PSTAT_DATL_1) /*!< DAT[1] Line Level status */
#define SDIOC_HOST_FLAG_DATL_D2 (SDIOC_PSTAT_DATL_2) /*!< DAT[2] Line Level status */
#define SDIOC_HOST_FLAG_DATL_D3 (SDIOC_PSTAT_DATL_3) /*!< DAT[3] Line Level status */
#define SDIOC_HOST_FLAG_WPL (SDIOC_PSTAT_WPL) /*!< Write Protect Line Level status */
#define SDIOC_HOST_FLAG_CDL (SDIOC_PSTAT_CDL) /*!< Card Detect Line Level status */
#define SDIOC_HOST_FLAG_CSS (SDIOC_PSTAT_CSS) /*!< Device Stable Status */
#define SDIOC_HOST_FLAG_CIN (SDIOC_PSTAT_CIN) /*!< Device Inserted status */
#define SDIOC_HOST_FLAG_BRE (SDIOC_PSTAT_BRE) /*!< Data buffer full status */
#define SDIOC_HOST_FLAG_BWE (SDIOC_PSTAT_BWE) /*!< Data buffer empty status */
#define SDIOC_HOST_FLAG_RTA (SDIOC_PSTAT_RTA) /*!< Read operation status */
#define SDIOC_HOST_FLAG_WTA (SDIOC_PSTAT_WTA) /*!< Write operation status */
#define SDIOC_HOST_FLAG_DA (SDIOC_PSTAT_DA) /*!< DAT Line transfer status */
#define SDIOC_HOST_FLAG_CID (SDIOC_PSTAT_CID) /*!< Command Inhibit with data status */
#define SDIOC_HOST_FLAG_CIC (SDIOC_PSTAT_CIC) /*!< Command Inhibit status */
/**
* @}
*/
/**
* @defgroup SDIOC_Normal_Error_Interrupt_Status SDIOC Normal Error Interrupt Status
* @{
*/
#define SDIOC_NORMAL_INT_FLAG_EI (SDIOC_NORINTST_EI) /*!< Error Interrupt Status */
#define SDIOC_NORMAL_INT_FLAG_CINT (SDIOC_NORINTST_CINT) /*!< Card Interrupt status */
#define SDIOC_NORMAL_INT_FLAG_CRM (SDIOC_NORINTST_CRM) /*!< Card Removal status */
#define SDIOC_NORMAL_INT_FLAG_CIST (SDIOC_NORINTST_CIST) /*!< Card Insertion status */
#define SDIOC_NORMAL_INT_FLAG_BRR (SDIOC_NORINTST_BRR) /*!< Buffer Read Ready status */
#define SDIOC_NORMAL_INT_FLAG_BWR (SDIOC_NORINTST_BWR) /*!< Buffer Write Ready status */
#define SDIOC_NORMAL_INT_FLAG_BGE (SDIOC_NORINTST_BGE) /*!< Block Gap Event status */
#define SDIOC_NORMAL_INT_FLAG_TC (SDIOC_NORINTST_TC) /*!< Transfer Complete status */
#define SDIOC_NORMAL_INT_FLAG_CC (SDIOC_NORINTST_CC) /*!< Command Complete status */
#define SDIOC_ERROR_INT_FLAG_ACE ((uint32_t)SDIOC_ERRINTST_ACE << 16U) /*!< Auto CMD12 Error Status */
#define SDIOC_ERROR_INT_FLAG_DEBE ((uint32_t)SDIOC_ERRINTST_DEBE << 16U) /*!< Data End Bit Error status */
#define SDIOC_ERROR_INT_FLAG_DCE ((uint32_t)SDIOC_ERRINTST_DCE << 16U) /*!< Data CRC Error status */
#define SDIOC_ERROR_INT_FLAG_DTOE ((uint32_t)SDIOC_ERRINTST_DTOE << 16U) /*!< Data Timeout Error status */
#define SDIOC_ERROR_INT_FLAG_CIE ((uint32_t)SDIOC_ERRINTST_CIE << 16U) /*!< Command Index Error status */
#define SDIOC_ERROR_INT_FLAG_CEBE ((uint32_t)SDIOC_ERRINTST_CEBE << 16U) /*!< Command End Bit Error status */
#define SDIOC_ERROR_INT_FLAG_CCE ((uint32_t)SDIOC_ERRINTST_CCE << 16U) /*!< Command CRC Error status */
#define SDIOC_ERROR_INT_FLAG_CTOE ((uint32_t)SDIOC_ERRINTST_CTOE << 16U) /*!< Command Timeout Error status */
#define SDIOC_ERROR_INT_STATIC_FLAGS ((uint32_t)SDIOC_ERROR_INT_FLAG_ACE | SDIOC_ERROR_INT_FLAG_DEBE | \
SDIOC_ERROR_INT_FLAG_DCE | SDIOC_ERROR_INT_FLAG_DTOE | \
SDIOC_ERROR_INT_FLAG_CIE | SDIOC_ERROR_INT_FLAG_CEBE | \
SDIOC_ERROR_INT_FLAG_CCE | SDIOC_ERROR_INT_FLAG_CTOE | \
SDIOC_NORMAL_INT_FLAG_TC | SDIOC_NORMAL_INT_FLAG_CC)
/**
* @}
*/
/**
* @defgroup SDIOC_Normal_Error_Interrupt SDIOC Normal Error Interrupt
* @{
*/
#define SDIOC_NORMAL_INT_CINTSEN (SDIOC_NORINTSGEN_CINTSEN) /*!< Card Interrupt */
#define SDIOC_NORMAL_INT_CRMSEN (SDIOC_NORINTSGEN_CRMSEN) /*!< Card Removal Interrupt */
#define SDIOC_NORMAL_INT_CISTSEN (SDIOC_NORINTSGEN_CISTSEN) /*!< Card Insertion Interrupt */
#define SDIOC_NORMAL_INT_BRRSEN (SDIOC_NORINTSGEN_BRRSEN) /*!< Buffer Read Ready Interrupt */
#define SDIOC_NORMAL_INT_BWRSEN (SDIOC_NORINTSGEN_BWRSEN) /*!< Buffer Write Ready Interrupt */
#define SDIOC_NORMAL_INT_BGESEN (SDIOC_NORINTSGEN_BGESEN) /*!< Block Gap Event Interrupt */
#define SDIOC_NORMAL_INT_TCSEN (SDIOC_NORINTSGEN_TCSEN) /*!< Transfer Complete Interrupt */
#define SDIOC_NORMAL_INT_CCSEN (SDIOC_NORINTSGEN_CCSEN) /*!< Command Complete Interrupt */
#define SDIOC_ERROR_INT_ACESEN ((uint32_t)SDIOC_ERRINTSGEN_ACESEN << 16U) /*!< Auto CMD12 Error Interrupt */
#define SDIOC_ERROR_INT_DEBESEN ((uint32_t)SDIOC_ERRINTSGEN_DEBESEN << 16U) /*!< Data End Bit Error Interrupt */
#define SDIOC_ERROR_INT_DCESEN ((uint32_t)SDIOC_ERRINTSGEN_DCESEN << 16U) /*!< Data CRC Error Interrupt */
#define SDIOC_ERROR_INT_DTOESEN ((uint32_t)SDIOC_ERRINTSGEN_DTOESEN << 16U) /*!< Data Timeout Error Interrupt */
#define SDIOC_ERROR_INT_CIESEN ((uint32_t)SDIOC_ERRINTSGEN_CIESEN << 16U) /*!< Command Index Error Interrupt */
#define SDIOC_ERROR_INT_CEBESEN ((uint32_t)SDIOC_ERRINTSGEN_CEBESEN << 16U) /*!< Command End Bit Error Interrupt */
#define SDIOC_ERROR_INT_CCESEN ((uint32_t)SDIOC_ERRINTSGEN_CCESEN << 16U) /*!< Command CRC Error Interrupt */
#define SDIOC_ERROR_INT_CTOESEN ((uint32_t)SDIOC_ERRINTSGEN_CTOESEN << 16U) /*!< Command Timeout Error Interrupt */
/**
* @}
*/
/**
* @defgroup SDIOC_Auto_CMD_Error_Status SDIOC Auto CMD Error Status
* @{
*/
#define SDIOC_AUTO_CMD_ERROR_FLAG_CMDE (SDIOC_ATCERRST_CMDE) /*!< Command Not Issued By Auto CMD12 Error Status */
#define SDIOC_AUTO_CMD_ERROR_FLAG_IE (SDIOC_ATCERRST_IE) /*!< Auto CMD12 Index Error status */
#define SDIOC_AUTO_CMD_ERROR_FLAG_EBE (SDIOC_ATCERRST_EBE) /*!< Auto CMD12 End Bit Error status */
#define SDIOC_AUTO_CMD_ERROR_FLAG_CE (SDIOC_ATCERRST_CE) /*!< Auto CMD12 CRC Error status */
#define SDIOC_AUTO_CMD_ERROR_FLAG_TOE (SDIOC_ATCERRST_TOE) /*!< Auto CMD12 Timeout Error status */
#define SDIOC_AUTO_CMD_ERROR_FLAG_NE (SDIOC_ATCERRST_NE) /*!< Auto CMD12 Not Executed status */
/**
* @}
*/
/**
* @defgroup SDIOC_Force_Auto_CMD_Error SDIOC Force Auto CMD Error
* @{
*/
#define SDIOC_FORCE_AUTO_CMD_ERROR_FCMDE (SDIOC_FEA_FCMDE) /*!< Force Event for Command Not Issued By Auto CMD12 Error */
#define SDIOC_FORCE_AUTO_CMD_ERROR_FIE (SDIOC_FEA_FIE) /*!< Force Event for Auto CMD12 Index Error */
#define SDIOC_FORCE_AUTO_CMD_ERROR_FEBE (SDIOC_FEA_FEBE) /*!< Force Event for Auto CMD12 End Bit Error */
#define SDIOC_FORCE_AUTO_CMD_ERROR_FCE (SDIOC_FEA_FCE) /*!< Force Event for Auto CMD12 CRC Error */
#define SDIOC_FORCE_AUTO_CMD_ERROR_FTOE (SDIOC_FEA_FTOE) /*!< Force Event for Auto CMD12 Timeout Error */
#define SDIOC_FORCE_AUTO_CMD_ERROR_FNE (SDIOC_FEA_FNE) /*!< Force Event for Auto CMD12 Not Executed */
/**
* @}
*/
/**
* @defgroup SDIOC_Force_Error_Interrupt SDIOC Force Error Interrupt
* @{
*/
#define SDIOC_FORCE_ERROR_INT_FACE (SDIOC_FEE_FACE) /*!< Force Event for Auto CMD12 Error */
#define SDIOC_FORCE_ERROR_INT_FDEBE (SDIOC_FEE_FDEBE) /*!< Force Event for Data End Bit Error */
#define SDIOC_FORCE_ERROR_INT_FDCE (SDIOC_FEE_FDCE) /*!< Force Event for Data CRC Error */
#define SDIOC_FORCE_ERROR_INT_FDTOE (SDIOC_FEE_FDTOE) /*!< Force Event for Data Timeout Error */
#define SDIOC_FORCE_ERROR_INT_FCIE (SDIOC_FEE_FCIE) /*!< Force Event for Command Index Error */
#define SDIOC_FORCE_ERROR_INT_FCEBE (SDIOC_FEE_FCEBE) /*!< Force Event for Command End Bit Error */
#define SDIOC_FORCE_ERROR_INT_FCCE (SDIOC_FEE_FCCE) /*!< Force Event for Command CRC Error */
#define SDIOC_FORCE_ERROR_INT_FCTOE (SDIOC_FEE_FCTOE) /*!< Force Event for Command Timeout Error */
/**
* @}
*/
/**
* @defgroup SDIOC_Response_Type SDIOC Response Type
* @{
*/
#define SDIOC_RESOPNE_TYPE_NO (0x00U) /*!< No Response */
#define SDIOC_RESOPNE_TYPE_R2 (SDIOC_CMD_RESTYP_0 | SDIOC_CMD_CCE) /*!< Command Response 2 */
#define SDIOC_RESOPNE_TYPE_R3_R4 (SDIOC_CMD_RESTYP_1) /*!< Command Response 3, 4 */
#define SDIOC_RESOPNE_TYPE_R1_R5_R6_R7 (SDIOC_CMD_RESTYP_1 | SDIOC_CMD_ICE | SDIOC_CMD_CCE) /*!< Command Response 1, 5, 6, 7 */
#define SDIOC_RESOPNE_TYPE_R1B_R5B (SDIOC_CMD_RESTYP | SDIOC_CMD_ICE | SDIOC_CMD_CCE) /*!< Command Response 1 and 5 with busy */
/**
* @}
*/
/**
* @defgroup SDIOC_Commands_Index SDIOC Commands Index
* @{
*/
#define SDIOC_CMD0_GO_IDLE_STATE (0U) /*!< Resets the SD memory card. */
#define SDIOC_CMD1_SEND_OP_COND (1U) /*!< Sends host capacity support information and activates the card's initialization process. */
#define SDIOC_CMD2_ALL_SEND_CID (2U) /*!< Asks any card connected to the host to send the CID numbers on the CMD line. */
#define SDIOC_CMD3_SEND_RELATIVE_ADDR (3U) /*!< Asks the card to publish a new relative address (RCA). */
#define SDIOC_CMD4_SET_DSR (4U) /*!< Programs the DSR of all cards. */
#define SDIOC_CMD5_IO_SEND_OP_COND (5U) /*!< Sends host capacity support information (HCS) and asks the accessed card to send its \
operating condition register (OCR) content in the response on the CMD line. */
#define SDIOC_CMD6_SWITCH_FUNC (6U) /*!< Checks switchable function (mode 0) and switch card function (mode 1). */
#define SDIOC_CMD7_SELECT_DESELECT_CARD (7U) /*!< Selects the card by its own relative address and gets deselected by any other address */
#define SDIOC_CMD8_SEND_IF_COND (8U) /*!< Sends SD Memory Card interface condition, which includes host supply voltage information \
and asks the card whether card supports voltage. */
#define SDIOC_CMD9_SEND_CSD (9U) /*!< Addressed card sends its card specific data (CSD) on the CMD line. */
#define SDIOC_CMD10_SEND_CID (10U) /*!< Addressed card sends its card identification (CID) on the CMD line. */
#define SDIOC_CMD11_READ_DAT_UNTIL_STOP (11U) /*!< SD card doesn't support it. */
#define SDIOC_CMD12_STOP_TRANSMISSION (12U) /*!< Forces the card to stop transmission. */
#define SDIOC_CMD13_SEND_STATUS (13U) /*!< Addressed card sends its status register. */
#define SDIOC_CMD14_HS_BUSTEST_READ (14U) /*!< Reserved */
#define SDIOC_CMD15_GO_INACTIVE_STATE (15U) /*!< Sends an addressed card into the inactive state. */
#define SDIOC_CMD16_SET_BLOCKLEN (16U) /*!< Sets the block length (in bytes for SDSC) for all following block commands(read, write). \
Default block length is fixed to 512 Bytes. Not effective for SDHS and SDXC. */
#define SDIOC_CMD17_READ_SINGLE_BLOCK (17U) /*!< Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed \
512 bytes in case of SDHC and SDXC. */
#define SDIOC_CMD18_READ_MULTIPLE_BLOCK (18U) /*!< Continuously transfers data blocks from card to host until interrupted by \
STOP_TRANSMISSION command. */
#define SDIOC_CMD19_HS_BUSTEST_WRITE (19U) /*!< 64 bytes tuning pattern is sent for SDR50 and SDR104. */
#define SDIOC_CMD20_WRITE_DAT_UNTIL_STOP (20U) /*!< Speed class control command. */
#define SDIOC_CMD23_SET_BLOCK_COUNT (23U) /*!< Specify block count for CMD18 and CMD25. */
#define SDIOC_CMD24_WRITE_SINGLE_BLOCK (24U) /*!< Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed\
512 bytes in case of SDHC and SDXC. */
#define SDIOC_CMD25_WRITE_MULTIPLE_BLOCK (25U) /*!< Continuously writes blocks of data until a STOP_TRANSMISSION follows. */
#define SDIOC_CMD26_PROGRAM_CID (26U) /*!< Reserved for manufacturers. */
#define SDIOC_CMD27_PROGRAM_CSD (27U) /*!< Programming of the programmable bits of the CSD. */
#define SDIOC_CMD28_SET_WRITE_PROT (28U) /*!< Sets the write protection bit of the addressed group. */
#define SDIOC_CMD29_CLR_WRITE_PROT (29U) /*!< Clears the write protection bit of the addressed group. */
#define SDIOC_CMD30_SEND_WRITE_PROT (30U) /*!< Asks the card to send the status of the write protection bits. */
#define SDIOC_CMD32_ERASE_WR_BLK_START (32U) /*!< Sets the address of the first write block to be erased. (For SD card only). */
#define SDIOC_CMD33_ERASE_WR_BLK_END (33U) /*!< Sets the address of the last write block of the continuous range to be erased. */
#define SDIOC_CMD35_ERASE_GRP_START (35U) /*!< Sets the address of the first write block to be erased. Reserved for each command system \
set by switch function command (CMD6). */
#define SDIOC_CMD36_ERASE_GRP_END (36U) /*!< Sets the address of the last write block of the continuous range to be erased. \
Reserved for each command system set by switch function command (CMD6). */
#define SDIOC_CMD38_ERASE (38U) /*!< Reserved for SD security applications. */
#define SDIOC_CMD39_FAST_IO (39U) /*!< SD card doesn't support it (Reserved). */
#define SDIOC_CMD40_GO_IRQ_STATE (40U) /*!< SD card doesn't support it (Reserved). */
#define SDIOC_CMD42_LOCK_UNLOCK (42U) /*!< Sets/resets the password or lock/unlock the card. The size of the data block is set by \
the SET_BLOCK_LEN command. */
#define SDIOC_CMD55_APP_CMD (55U) /*!< Indicates to the card that the next command is an application specific command rather \
than a standard command. */
#define SDIOC_CMD56_GEN_CMD (56U) /*!< Used either to transfer a data block to the card or to get a data block from the card \
for general purpose/application specific commands. */
#define SDIOC_CMD64_NO_CMD (64U) /*!< No command */
/**
* @brief Following commands are SD Card Specific commands.
* CMD55_APP_CMD should be sent before sending these commands.
*/
#define SDIOC_ACMD6_SET_BUS_WIDTH (6U) /*!< (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus \
widths are given in SCR register. */
#define SDIOC_ACMD13_SD_STATUS (13U) /*!< (ACMD13) Sends the SD status. */
#define SDIOC_ACMD22_SEND_NUM_WR_BLOCKS (22U) /*!< (ACMD22) Sends the number of the written (without errors) write blocks. Responds with \
32bit+CRC data block. */
#define SDIOC_ACMD41_SD_APP_OP_COND (41U) /*!< (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to \
send its operating condition register (OCR) content in the response on the CMD line. */
#define SDIOC_ACMD42_SET_CLR_CARD_DETECT (42U) /*!< (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */
#define SDIOC_ACMD51_SEND_SCR (51U) /*!< Reads the SD Configuration Register (SCR). */
#define SDIOC_ACMD52_RW_DIRECT (52U) /*!< For SD I/O card only, reserved for security specification. */
#define SDIOC_ACMD53_RW_EXTENDED (53U) /*!< For SD I/O card only, reserved for security specification. */
/**
* @brief Following commands are SD Card Specific security commands.
* CMD55_APP_CMD should be sent before sending these commands.
*/
#define SDIOC_ACMD43_GET_MKB (43U)
#define SDIOC_ACMD44_GET_MID (44U)
#define SDIOC_ACMD45_SET_CER_RN1 (45U)
#define SDIOC_ACMD46_GET_CER_RN2 (46U)
#define SDIOC_ACMD47_SET_CER_RES2 (47U)
#define SDIOC_ACMD48_GET_CER_RES1 (48U)
#define SDIOC_ACMD18_SECURE_READ_MULTIPLE_BLOCK (18U)
#define SDIOC_ACMD25_SECURE_WRITE_MULTIPLE_BLOCK (25U)
#define SDIOC_ACMD38_SECURE_ERASE (38U)
#define SDIOC_ACMD49_CHANGE_SECURE_AREA (49U)
#define SDIOC_ACMD48_SECURE_WRITE_MKB (48U)
/**
* @}
*/
/**
* @defgroup SDMMC_Error_Code SDMMC Error Code
* @{
*/
#define SDMMC_ERROR_NONE (0x00000000UL) /*!< No error */
#define SDMMC_ERROR_ADDR_OUT_OF_RANGE (0x80000000UL) /*!< Error when addressed block is out of range */
#define SDMMC_ERROR_ADDR_MISALIGNED (0x40000000UL) /*!< Misaligned address */
#define SDMMC_ERROR_BLOCK_LEN_ERR (0x20000000UL) /*!< Transferred block length is not allowed for the card or the \
number of transferred bytes does not match the block length */
#define SDMMC_ERROR_ERASE_SEQ_ERR (0x10000000UL) /*!< An error in the sequence of erase command occurs */
#define SDMMC_ERROR_BAD_ERASE_PARAM (0x08000000UL) /*!< An invalid selection for erase groups */
#define SDMMC_ERROR_WRITE_PROT_VIOLATION (0x04000000UL) /*!< Attempt to program a write protect block */
#define SDMMC_ERROR_LOCK_UNLOCK_FAILED (0x01000000UL) /*!< Sequence or password error has been detected in unlock command \
or if there was an attempt to access a locked card */
#define SDMMC_ERROR_COM_CRC_FAILED (0x00800000UL) /*!< CRC check of the previous command failed */
#define SDMMC_ERROR_ILLEGAL_CMD (0x00400000UL) /*!< Command is not legal for the card state */
#define SDMMC_ERROR_CARD_ECC_FAILED (0x00200000UL) /*!< Card internal ECC was applied but failed to correct the data */
#define SDMMC_ERROR_CC_ERR (0x00100000UL) /*!< Internal card controller error */
#define SDMMC_ERROR_GENERAL_UNKNOWN_ERR (0x00080000UL) /*!< General or unknown error */
#define SDMMC_ERROR_STREAM_READ_UNDERRUN (0x00040000UL) /*!< The card could not sustain data reading in stream rmode */
#define SDMMC_ERROR_STREAM_WRITE_OVERRUN (0x00020000UL) /*!< The card could not sustain data programming in stream mode */
#define SDMMC_ERROR_CID_CSD_OVERWRITE (0x00010000UL) /*!< CID/CSD overwrite error */
#define SDMMC_ERROR_WP_ERASE_SKIP (0x00008000UL) /*!< Only partial address space was erased */
#define SDMMC_ERROR_CARD_ECC_DISABLED (0x00004000UL) /*!< Command has been executed without using internal ECC */
#define SDMMC_ERROR_ERASE_RESET (0x00002000UL) /*!< Erase sequence was cleared before executing because an out of \
erase sequence command was received */
#define SDMMC_ERROR_CMD_AUTO_SEND (0x00001000UL) /*!< An error occurred in sending the command automatically */
#define SDMMC_ERROR_CMD_INDEX (0x00000800UL) /*!< The received response contains a command number error */
#define SDMMC_ERROR_CMD_STOP_BIT (0x00000400UL) /*!< Command line detects low level at stop bit */
#define SDMMC_ERROR_CMD_CRC_FAIL (0x00000200UL) /*!< Command response received (but CRC check failed) */
#define SDMMC_ERROR_CMD_TIMEOUT (0x00000100UL) /*!< Command response timeout */
#define SDMMC_ERROR_SWITCH_ERROR (0x00000080UL) /*!< The card did not switch to the expected mode as requested by \
the SWITCH command */
#define SDMMC_ERROR_DATA_STOP_BIT (0x00000040UL) /*!< Data line detects low level at stop bit */
#define SDMMC_ERROR_DATA_CRC_FAIL (0x00000020UL) /*!< Data block sent/received (CRC check failed) */
#define SDMMC_ERROR_DATA_TIMEOUT (0x00000010UL) /*!< Data timeout */
#define SDMMC_ERROR_AKE_SEQ_ERR (0x00000008UL) /*!< Error in sequence of authentication */
#define SDMMC_ERROR_INVALID_VOLTRANGE (0x00000004UL) /*!< Error in case of invalid voltage range */
#define SDMMC_ERROR_REQUEST_NOT_APPLICABLE (0x00000002UL) /*!< Error when command request is not applicable */
#define SDMMC_ERROR_UNSUPPORTED_FEATURE (0x00000001UL) /*!< Error when feature is not insupported */
#define SDMMC_CARD_ERROR_BITS_MASK (0xFDFFE048UL) /*!< SD/MMC Error status bits mask */
/**
* @}
*/
/**
* @defgroup SDMMC_Card_Status_Bit SDMMC Card Status Bit
* @{
*/
#define SDMMC_STATUS_CARD_IS_LOCKED_POS (24U)
#define SDMMC_STATUS_CARD_IS_LOCKED (0x02000000UL) /*!< When set, signals that the card is locked by the host */
#define SDMMC_STATUS_CURRENT_STATE_POS (9U)
#define SDMMC_STATUS_CURRENT_STATE (0x00001E00UL) /*!< The state of the card when receiving the command */
#define SDMMC_STATUS_READY_FOR_DATA_POS (8U)
#define SDMMC_STATUS_READY_FOR_DATA (0x00000100UL) /*!< Corresponds to buffer empty signaling on the bus */
#define SDMMC_STATUS_APP_CMD_POS (5U)
#define SDMMC_STATUS_APP_CMD (0x00000020UL) /*!< The card will expect ACMD, or an indication that the command has been interpreted as ACMD */
/**
* @}
*/
/**
* @defgroup SDMMC_SCR_Register SDMMC SCR Register
* @{
*/
#define SDMMC_SCR_PHY_SPEC_VER_1P0 (0x00000000UL)
#define SDMMC_SCR_PHY_SPEC_VER_1P1 (0x01000000UL)
#define SDMMC_SCR_PHY_SPEC_VER_2P0 (0x02000000UL)
#define SDMMC_SCR_BUS_WIDTH_4BIT (0x00040000UL)
#define SDMMC_SCR_BUS_WIDTH_1BIT (0x00010000UL)
/**
* @}
*/
/**
* @defgroup SDMMC_OCR_Register SDMMC OCR Register
* @{
*/
#define SDMMC_OCR_HIGH_CAPACITY (0x40000000UL)
#define SDMMC_OCR_STD_CAPACITY (0x00000000UL)
/**
* @}
*/
/**
* @defgroup SDMMC_CSD_Register SDMMC CSD Register
* @{
*/
/* Command Class supported */
#define SDMMC_CSD_SUPPORT_CLASS5_ERASE (0x00000020UL)
/**
* @}
*/
/**
* @defgroup SDMMC_Common_Parameter SDMMC Common Parameter
* @{
*/
#define SDMMC_DATA_TIMEOUT (0x0000FFFFUL)
#define SDMMC_MAX_VOLTAGE_TRIAL (0x0000FFFFUL)
/**
* @}
*/
/**
* @}
*/
/*******************************************************************************
* Global variable definitions ('extern')
******************************************************************************/
/*******************************************************************************
Global function prototypes (definition in C source)
******************************************************************************/
/**
* @addtogroup SDIOC_Global_Functions
* @{
*/
en_result_t SDIOC_DeInit(M4_SDIOC_TypeDef *SDIOCx);
en_result_t SDIOC_Init(M4_SDIOC_TypeDef *SDIOCx, const stc_sdioc_init_t *pstcSdiocInit);
en_result_t SDIOC_StructInit(stc_sdioc_init_t *pstcSdiocInit);
en_result_t SDIOC_SoftwareReset(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8ResetType);
void SDIOC_PowerCmd(M4_SDIOC_TypeDef *SDIOCx, en_functional_state_t enNewSta);
en_functional_state_t SDIOC_GetPowerState(const M4_SDIOC_TypeDef *SDIOCx);
uint32_t SDIOC_GetMode(const M4_SDIOC_TypeDef *SDIOCx);
void SDIOC_ClockCmd(M4_SDIOC_TypeDef *SDIOCx, en_functional_state_t enNewSta);
void SDIOC_SetClockDiv(M4_SDIOC_TypeDef *SDIOCx, uint16_t u16ClkDiv);
en_result_t SDIOC_GetOptimumClockDiv(uint32_t u32ClkFreq, uint16_t *pu16ClkDiv);
en_result_t SDIOC_VerifyClockDiv(uint32_t u32Mode, uint8_t u8SpeedMode, uint16_t u16ClkDiv);
en_functional_state_t SDIOC_GetDeviceInsertState(const M4_SDIOC_TypeDef *SDIOCx);
void SDIOC_SetSpeedMode(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8SpeedMode);
void SDIOC_SetBusWidth(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8BusWidth);
void SDIOC_SetCardDetectSource(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8Src);
void SDIOC_SetCardDetectTestLevel(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8Level);
en_result_t SDIOC_SendCommand(M4_SDIOC_TypeDef *SDIOCx, const stc_sdioc_cmd_init_t *pstcCmd);
en_result_t SDIOC_CmdStructInit(stc_sdioc_cmd_init_t *pstcCmd);
en_result_t SDIOC_GetResponse(M4_SDIOC_TypeDef *SDIOCx, uint8_t u8RespReg, uint32_t *pu32RespVal);
en_result_t SDIOC_ConfigData(M4_SDIOC_TypeDef *SDIOCx, const stc_sdioc_data_init_t *pstcData);
en_result_t SDIOC_DataStructInit(stc_sdioc_data_init_t *pstcData);
en_result_t SDIOC_ReadBuffer(M4_SDIOC_TypeDef *SDIOCx, uint8_t au8Data[], uint32_t u32Len);
en_result_t SDIOC_WriteBuffer(M4_SDIOC_TypeDef *SDIOCx, const uint8_t au8Data[], uint32_t u32Len);
void SDIOC_BlockGapStopCmd(M4_SDIOC_TypeDef *SDIOCx, en_functional_state_t enNewSta);
void SDIOC_RestartTransfer(M4_SDIOC_TypeDef *SDIOCx);
void SDIOC_ReadWaitCmd(M4_SDIOC_TypeDef *SDIOCx, en_functional_state_t enNewSta);
void SDIOC_BlockGapInterruptCmd(M4_SDIOC_TypeDef *SDIOCx, en_functional_state_t enNewSta);
void SDIOC_IntCmd(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32IntSrc, en_functional_state_t enNewSta);
en_functional_state_t SDIOC_GetIntEnableState(const M4_SDIOC_TypeDef *SDIOCx, uint32_t u32IntSrc);
en_flag_status_t SDIOC_GetIntStatus(const M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Flag);
void SDIOC_ClearIntStatus(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Flag);
void SDIOC_IntStatusCmd(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32IntSrc, en_functional_state_t enNewSta);
en_flag_status_t SDIOC_GetHostStatus(const M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Flag);
en_flag_status_t SDIOC_GetAutoCmdErrorStatus(const M4_SDIOC_TypeDef *SDIOCx, uint16_t u16Flag);
void SDIOC_ForceAutoCmdErrorEvent(M4_SDIOC_TypeDef *SDIOCx, uint16_t u16CmdFlag);
void SDIOC_ForceErrorInterruptEvent(M4_SDIOC_TypeDef *SDIOCx, uint16_t u16IntFlag);
/* SDMMC Commands management functions */
en_result_t SDMMC_CMD0_GoIdleState(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD2_AllSendCID(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD3_SendRelativeAddr(M4_SDIOC_TypeDef *SDIOCx, uint16_t *pu16RCA, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD6_SwitchFunc(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Argument, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD7_SelectDeselectCard(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32RCA, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD8_SendInterfaceCond(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD9_SendCSD(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32RCA, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD12_StopTransmission(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD13_SendStatus(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32RCA, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD16_SetBlockLength(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32BlockLen, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD17_ReadSingleBlock(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32ReadAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD18_ReadMultipleBlock(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32ReadAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD24_WriteSingleBlock(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32WriteAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD25_WriteMultipleBlock(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32WriteAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD32_EraseBlockStartAddr(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32StartAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD33_EraseBlockEndAddr(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32EndAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD38_Erase(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD55_AppCmd(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Argument, uint32_t *pu32ErrSta);
en_result_t SDMMC_ACMD6_SetBusWidth(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32BusWidth, uint32_t *pu32ErrSta);
en_result_t SDMMC_ACMD13_SendStatus(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_ACMD41_SendOperatCond(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Argument, uint32_t *pu32ErrSta);
en_result_t SDMMC_ACMD51_SendSCR(M4_SDIOC_TypeDef *SDIOCx, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD1_SendOperatCond(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32Argument, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD35_EraseGroupStartAddr(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32StartAddr, uint32_t *pu32ErrSta);
en_result_t SDMMC_CMD36_EraseGroupEndAddr(M4_SDIOC_TypeDef *SDIOCx, uint32_t u32EndAddr, uint32_t *pu32ErrSta);
/**
* @}
*/
#endif /* DDL_SDIOC_ENABLE */
/**
* @}
*/
/**
* @}
*/
#ifdef __cplusplus
}
#endif
#endif /* __HC32F4A0_SDIOC_H__ */
/*******************************************************************************
* EOF (not truncated)
******************************************************************************/