310 lines
8.0 KiB
C
310 lines
8.0 KiB
C
/*
|
|
* Copyright (c) 2006-2022, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2022-02-22 airm2m first version
|
|
*/
|
|
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include <drivers/spi.h>
|
|
#include "board.h"
|
|
#include "drv_spi.h"
|
|
|
|
#ifdef BSP_USING_SPI
|
|
|
|
#define LOG_TAG "drv.spi"
|
|
#include "drv_log.h"
|
|
|
|
#ifndef ITEM_NUM
|
|
#define ITEM_NUM(items) sizeof(items) / sizeof(items[0])
|
|
#endif
|
|
|
|
struct spi_bus_device
|
|
{
|
|
struct rt_spi_bus parent;
|
|
char *name;
|
|
SPI_TypeDef *periph;
|
|
rt_base_t cs_pin;
|
|
struct rt_spi_device spi_device;
|
|
};
|
|
|
|
static struct spi_bus_device spi_bus_device_list[] = {
|
|
#ifdef BSP_USING_SPI1
|
|
{.periph = SPI1,
|
|
.name = "spi1"},
|
|
#endif
|
|
|
|
#ifdef BSP_USING_SPI2
|
|
{.periph = SPI2,
|
|
.name = "spi2"},
|
|
#endif
|
|
};
|
|
|
|
/**
|
|
* Attach the spi device to SPI bus, this function must be used after initialization.
|
|
*/
|
|
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, rt_uint32_t pin)
|
|
{
|
|
rt_err_t result;
|
|
struct rt_spi_bus *spi_bus;
|
|
struct spi_bus_device *spi_bus_dev;
|
|
|
|
RT_ASSERT(bus_name != RT_NULL);
|
|
RT_ASSERT(device_name != RT_NULL);
|
|
|
|
spi_bus = (struct rt_spi_bus *)rt_device_find(bus_name);
|
|
|
|
RT_ASSERT(spi_bus != RT_NULL);
|
|
|
|
spi_bus_dev = (struct spi_bus_device *)spi_bus;
|
|
|
|
spi_bus_dev->cs_pin = pin;
|
|
|
|
//often active low, output from master
|
|
rt_pin_mode(spi_bus_dev->cs_pin, PIN_MODE_OUTPUT);
|
|
rt_pin_write(spi_bus_dev->cs_pin, PIN_HIGH);
|
|
|
|
result = rt_spi_bus_attach_device(&spi_bus_dev->spi_device, device_name, bus_name, RT_NULL);
|
|
|
|
if (result != RT_EOK)
|
|
{
|
|
LOG_E("%s attach to %s faild, %d\n", device_name, bus_name, result);
|
|
}
|
|
|
|
LOG_D("%s attach to %s done", device_name, bus_name);
|
|
|
|
return result;
|
|
}
|
|
|
|
static rt_err_t air32_spi_configure(struct rt_spi_device *device, struct rt_spi_configuration *configuration)
|
|
{
|
|
struct rt_spi_bus *spi_bus;
|
|
struct spi_bus_device *spi_bus_dev;
|
|
rt_uint32_t spi_clock;
|
|
|
|
SPI_InitTypeDef SPI_InitStruct;
|
|
|
|
RT_ASSERT(device != RT_NULL);
|
|
RT_ASSERT(configuration != RT_NULL);
|
|
|
|
//device is not RT_NULL, so spi_bus not need check
|
|
spi_bus = (struct rt_spi_bus *)device->bus;
|
|
spi_bus_dev = (struct spi_bus_device *)spi_bus;
|
|
|
|
air32_spi_clock_and_io_init(spi_bus_dev->periph);
|
|
|
|
spi_clock = air32_spi_clock_get(spi_bus_dev->periph);
|
|
|
|
if (configuration->data_width <= 8)
|
|
{
|
|
SPI_InitStruct.SPI_DataSize = SPI_DataSize_8b;
|
|
}
|
|
else if (configuration->data_width <= 16)
|
|
{
|
|
SPI_InitStruct.SPI_DataSize = SPI_DataSize_16b;
|
|
}
|
|
else
|
|
{
|
|
return RT_EIO;
|
|
}
|
|
|
|
if (configuration->max_hz >= spi_clock / 2)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_2;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 4)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_4;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 8)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_8;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 16)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_16;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 32)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_32;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 64)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_64;
|
|
}
|
|
else if (configuration->max_hz >= spi_clock / 128)
|
|
{
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_128;
|
|
}
|
|
else
|
|
{
|
|
/* min prescaler 256 */
|
|
SPI_InitStruct.SPI_BaudRatePrescaler = SPI_BaudRatePrescaler_256;
|
|
}
|
|
|
|
switch (configuration->mode & RT_SPI_MODE_3)
|
|
{
|
|
case RT_SPI_MODE_0:
|
|
SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;
|
|
SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;
|
|
break;
|
|
case RT_SPI_MODE_1:
|
|
SPI_InitStruct.SPI_CPHA = SPI_CPHA_2Edge;
|
|
SPI_InitStruct.SPI_CPOL = SPI_CPOL_Low;
|
|
break;
|
|
case RT_SPI_MODE_2:
|
|
SPI_InitStruct.SPI_CPHA = SPI_CPHA_1Edge;
|
|
SPI_InitStruct.SPI_CPOL = SPI_CPOL_High;
|
|
break;
|
|
case RT_SPI_MODE_3:
|
|
SPI_InitStruct.SPI_CPHA = SPI_CPHA_2Edge;
|
|
SPI_InitStruct.SPI_CPOL = SPI_CPOL_High;
|
|
break;
|
|
}
|
|
|
|
/* MSB or LSB */
|
|
if (configuration->mode & RT_SPI_MSB)
|
|
{
|
|
SPI_InitStruct.SPI_FirstBit = SPI_FirstBit_MSB;
|
|
}
|
|
else
|
|
{
|
|
SPI_InitStruct.SPI_FirstBit = SPI_FirstBit_LSB;
|
|
}
|
|
|
|
SPI_InitStruct.SPI_Direction = SPI_Direction_2Lines_FullDuplex;
|
|
SPI_InitStruct.SPI_Mode = SPI_Mode_Master;
|
|
SPI_InitStruct.SPI_NSS = SPI_NSS_Soft;
|
|
|
|
SPI_Init(spi_bus_dev->periph, &SPI_InitStruct);
|
|
/* Enable SPI_MASTER */
|
|
SPI_Cmd(spi_bus_dev->periph, ENABLE);
|
|
|
|
return RT_EOK;
|
|
};
|
|
|
|
static rt_uint32_t air32_spi_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
|
|
{
|
|
struct rt_spi_bus *spi_bus;
|
|
struct spi_bus_device *spi_bus_dev;
|
|
struct rt_spi_configuration *config;
|
|
|
|
RT_ASSERT(device != NULL);
|
|
RT_ASSERT(message != NULL);
|
|
|
|
//device is not RT_NULL, so spi_bus not need check
|
|
spi_bus = (struct rt_spi_bus *)device->bus;
|
|
spi_bus_dev = (struct spi_bus_device *)spi_bus;
|
|
config = &device->config;
|
|
|
|
/* take CS */
|
|
if (message->cs_take)
|
|
{
|
|
rt_pin_write(spi_bus_dev->cs_pin, PIN_LOW);
|
|
LOG_D("spi take cs\n");
|
|
}
|
|
|
|
if (config->data_width <= 8)
|
|
{
|
|
const rt_uint8_t *send_ptr = message->send_buf;
|
|
rt_uint8_t *recv_ptr = message->recv_buf;
|
|
rt_uint32_t size = message->length;
|
|
rt_uint8_t data;
|
|
|
|
LOG_D("spi poll transfer start: %d\n", size);
|
|
|
|
while (size--)
|
|
{
|
|
data = 0xFF;
|
|
|
|
if (send_ptr != RT_NULL)
|
|
{
|
|
data = *send_ptr++;
|
|
}
|
|
|
|
//Wait until the transmit buffer is empty
|
|
while (SPI_I2S_GetFlagStatus(spi_bus_dev->periph, SPI_I2S_FLAG_TXE) == RESET);
|
|
// Send the byte
|
|
SPI_I2S_SendData(spi_bus_dev->periph, data);
|
|
|
|
//Wait until a data is received
|
|
while (SPI_I2S_GetFlagStatus(spi_bus_dev->periph, SPI_I2S_FLAG_RXNE) == RESET);
|
|
// Get the received data
|
|
data = SPI_I2S_ReceiveData(spi_bus_dev->periph);
|
|
|
|
if (recv_ptr != RT_NULL)
|
|
{
|
|
*recv_ptr++ = data;
|
|
}
|
|
}
|
|
LOG_D("spi poll transfer finsh\n");
|
|
}
|
|
else if (config->data_width <= 16)
|
|
{
|
|
const rt_uint16_t *send_ptr = message->send_buf;
|
|
rt_uint16_t *recv_ptr = message->recv_buf;
|
|
rt_uint32_t size = message->length;
|
|
rt_uint16_t data;
|
|
|
|
while (size--)
|
|
{
|
|
data = 0xFF;
|
|
|
|
if (send_ptr != RT_NULL)
|
|
{
|
|
data = *send_ptr++;
|
|
}
|
|
|
|
//Wait until the transmit buffer is empty
|
|
while (RESET == SPI_I2S_GetFlagStatus(spi_bus_dev->periph, SPI_I2S_FLAG_TXE))
|
|
;
|
|
// Send the byte
|
|
SPI_I2S_SendData(spi_bus_dev->periph, data);
|
|
|
|
//Wait until a data is received
|
|
while (RESET == SPI_I2S_GetFlagStatus(spi_bus_dev->periph, SPI_I2S_FLAG_RXNE))
|
|
;
|
|
// Get the received data
|
|
data = SPI_I2S_ReceiveData(spi_bus_dev->periph);
|
|
|
|
if (recv_ptr != RT_NULL)
|
|
{
|
|
*recv_ptr++ = data;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* release CS */
|
|
if (message->cs_release)
|
|
{
|
|
rt_pin_write(spi_bus_dev->cs_pin, PIN_HIGH);
|
|
LOG_D("spi release cs\n");
|
|
}
|
|
|
|
return message->length;
|
|
};
|
|
|
|
static struct rt_spi_ops spi_ops = {
|
|
.configure = air32_spi_configure,
|
|
.xfer = air32_spi_xfer};
|
|
|
|
int rt_hw_spi_init(void)
|
|
{
|
|
int index;
|
|
|
|
for (index = 0; index < ITEM_NUM(spi_bus_device_list); index++)
|
|
{
|
|
rt_spi_bus_register(&spi_bus_device_list[index].parent, spi_bus_device_list[index].name, &spi_ops);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
INIT_BOARD_EXPORT(rt_hw_spi_init);
|
|
|
|
#endif /* BSP_USING_SPI */
|