f587a55bc2
* [libcpu/aarch64] add smp support * [libcpu/aarch64] rt_hw_trap_irq get irq instead of iar when using gicv2 * [libcpu/aarch64] disable irq/fiq when switch thread * [libcpu/aarch64] add gtimer frq set and stack align * [libcpu/aarch64] add gicv3 support and bsp/rockchip/rk3568 |
||
|---|---|---|
| .. | ||
| applications | ||
| driver | ||
| .config | ||
| Kconfig | ||
| README.md | ||
| README_zh.md | ||
| SConscript | ||
| SConstruct | ||
| link.lds | ||
| rtconfig.h | ||
| rtconfig.py | ||
README.md
RK3568 BSP Introduction
中文页 | English
1. Introduction
RK3568 is a general-purpose SOC, quad-core 64-bit Cortex-A55 processor, with 22nm lithography process, has frequency up to 2.0GHz and Mali G52 GPU, support 4K decoding and 1080P encoding. Support mangy interfaces such as SATA/PCIE/USB3.0, an 0.8T NPU for lightweight AI applications. Support dual Gigabit Ethernet ports, LPDDR4 memory, etc.
This project ported RT-Thread on RK3568, you can use the RADXA ROCK 3A version of the RK3568 in low-priced, which can even replace the Raspberry Pi 4B.
2. Compiling
Usage ARM Developer GNU ToolChain, it support Linux and Windows:
https://developer.arm.com/tools-and-software/open-source-software/developer-tools/gnu-toolchain/gnu-a/downloads/
Download the xxx-aarch64-none-elf of x86_64 hosted platform, set the RTT_EXEC_PATH is system environment after decompress the binary.
Enter directory rt-thread/bsp/qemu-virt64-aarch64 and input:
scons
3. Execution
RK3568 has different Kernel install methods according to different boardsit, recommend to install into the SD card: (Official|RADXA ROCK 3A).
After install Kernel, storage the rtthread.bin to EFI partition (the second partition), and add this line in the front of boot.cmd in this partition:
fatload mmc 1:1 0x208000 /rtthread.bin;dcache flush;go 0x208000
After modifying the script, build a binary script boot.scr in this partition:
# Install the uboot-mkimage package on Linux, or use MSYS2 to install the u-boot-tools package on Windows
mkimage -C none -A arm -T script -d boot.cmd boot.scr
According to different boards, the serial port can support up to UART0~9, this project uses UART2 (Official|RADXA ROCK 3A) by default, the baud rate is 1500000, please make sure that the serial port used supports this baud rate.
heap: [0x002663f0 - 0x042663f0]
\ | /
- RT - Thread Operating System
/ | \ 4.1.0 build Mar 19 2022 17:17:29
2006 - 2022 Copyright by RT-Thread team
Hi, this is RT-Thread!!
msh />
4. Condition
| Driver | Condition | Remark |
|---|---|---|
| UART | Support | UART0~9 |