libs/rt-thread
libs
/
rt-thread
4
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
rt-thread/bsp/swm320/drivers/drv_spi.c

308 lines
8.2 KiB
C
Raw Blame History

/*
* Copyright (c) 2006-2018, Synwit Technology Co.,Ltd.
*
* SPDX-License-Identifier: Apache-2.0
*
* Change Logs:
* Date Author Notes
* 2018-05-31 ZYH first version
* 2018-12-10 Zohar_Lee format file
* 2020-07-10 lik format file
*/
#include "drv_spi.h"
#ifdef RT_USING_SPI
#ifdef BSP_USING_SPI
//#define DRV_DEBUG
#define LOG_TAG "drv.spi"
#include <drv_log.h>
static struct swm_spi_cfg spi_cfg[] =
{
#ifdef BSP_USING_SPI0
SPI0_BUS_CONFIG,
#endif
#ifdef BSP_USING_SPI1
SPI1_BUS_CONFIG,
#endif
};
static struct swm_spi spi_bus_drv[sizeof(spi_cfg) / sizeof(spi_cfg[0])] = {0};
static rt_err_t swm_spi_init(struct swm_spi *spi_drv, struct rt_spi_configuration *configure)
{
RT_ASSERT(spi_drv != RT_NULL);
RT_ASSERT(configure != RT_NULL);
struct swm_spi_cfg *cfg = spi_drv->cfg;
if (configure->mode & RT_SPI_SLAVE)
{
cfg->spi_initstruct.Master = 0;
}
else
{
cfg->spi_initstruct.Master = 1;
}
if (configure->mode & RT_SPI_3WIRE)
{
return RT_EINVAL;
}
if (configure->data_width == 8)
{
cfg->spi_initstruct.WordSize = 8;
}
else if (configure->data_width == 16)
{
cfg->spi_initstruct.WordSize = 16;
}
else
{
return RT_EIO;
}
if (configure->mode & RT_SPI_CPHA)
{
cfg->spi_initstruct.SampleEdge = SPI_SECOND_EDGE;
}
else
{
cfg->spi_initstruct.SampleEdge = SPI_FIRST_EDGE;
}
if (configure->mode & RT_SPI_CPOL)
{
cfg->spi_initstruct.IdleLevel = SPI_HIGH_LEVEL;
}
else
{
cfg->spi_initstruct.IdleLevel = SPI_LOW_LEVEL;
}
if (configure->max_hz >= SystemCoreClock / 4)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_4;
}
else if (configure->max_hz >= SystemCoreClock / 8)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_8;
}
else if (configure->max_hz >= SystemCoreClock / 16)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_16;
}
else if (configure->max_hz >= SystemCoreClock / 32)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_32;
}
else if (configure->max_hz >= SystemCoreClock / 64)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_64;
}
else if (configure->max_hz >= SystemCoreClock / 128)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_128;
}
else if (configure->max_hz >= SystemCoreClock / 256)
{
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_256;
}
else
{
/* min prescaler 512 */
cfg->spi_initstruct.clkDiv = SPI_CLKDIV_512;
}
SPI_Init(cfg->SPIx, &(cfg->spi_initstruct));
SPI_Open(cfg->SPIx);
LOG_D("%s init done", cfg->name);
return RT_EOK;
}
#define SPISTEP(datalen) (((datalen) == 8) ? 1 : 2)
#define SPISEND_1(reg, ptr, datalen) \
do \
{ \
if (datalen == 8) \
{ \
(reg) = *(rt_uint8_t *)(ptr); \
} \
else \
{ \
(reg) = *(rt_uint16_t *)(ptr); \
} \
} while (0)
#define SPIRECV_1(reg, ptr, datalen) \
do \
{ \
if (datalen == 8) \
{ \
*(rt_uint8_t *)(ptr) = (reg); \
} \
else \
{ \
*(rt_uint16_t *)(ptr) = reg; \
} \
} while (0)
static rt_err_t spitxrx1b(struct swm_spi *spi_drv, void *rcvb, const void *sndb)
{
rt_uint32_t padrcv = 0;
rt_uint32_t padsnd = 0xFF;
if (!rcvb && !sndb)
{
return RT_ERROR;
}
if (!rcvb)
{
rcvb = &padrcv;
}
if (!sndb)
{
sndb = &padsnd;
}
while (SPI_IsTXFull(spi_drv->cfg->SPIx))
;
SPISEND_1(spi_drv->cfg->SPIx->DATA, sndb, spi_drv->cfg->spi_initstruct.WordSize);
while (SPI_IsRXEmpty(spi_drv->cfg->SPIx))
;
SPIRECV_1(spi_drv->cfg->SPIx->DATA, rcvb, spi_drv->cfg->spi_initstruct.WordSize);
return RT_EOK;
}
static rt_uint32_t swm_spi_xfer(struct rt_spi_device *device, struct rt_spi_message *message)
{
rt_err_t res;
RT_ASSERT(device != RT_NULL);
RT_ASSERT(device->bus != RT_NULL);
RT_ASSERT(device->bus->parent.user_data != RT_NULL);
RT_ASSERT(message != RT_NULL);
struct swm_spi *spi_drv = rt_container_of(device->bus, struct swm_spi, spi_bus);
struct swm_spi_cfg *cfg = spi_drv->cfg;
struct swm_spi_cs *cs = device->parent.user_data;
if (message->cs_take)
{
GPIO_ClrBit(cs->GPIOx, cs->gpio_pin);
}
LOG_D("%s transfer prepare and start", cfg->name);
LOG_D("%s sendbuf: %X, recvbuf: %X, length: %d",
cfg->name, (uint32_t)message->send_buf, (uint32_t)message->recv_buf, message->length);
const rt_uint8_t *sndb = message->send_buf;
rt_uint8_t *rcvb = message->recv_buf;
rt_int32_t length = message->length;
while (length)
{
res = spitxrx1b(spi_drv, rcvb, sndb);
if (rcvb)
{
rcvb += SPISTEP(cfg->spi_initstruct.WordSize);
}
if (sndb)
{
sndb += SPISTEP(cfg->spi_initstruct.WordSize);
}
if (res != RT_EOK)
{
break;
}
length--;
}
/* Wait until Busy flag is reset before disabling SPI */
while (!SPI_IsTXEmpty(cfg->SPIx) && !SPI_IsRXEmpty(cfg->SPIx))
;
if (message->cs_release)
{
GPIO_SetBit(cs->GPIOx, cs->gpio_pin);
}
return message->length - length;
}
static rt_err_t swm_spi_configure(struct rt_spi_device *device,
struct rt_spi_configuration *configure)
{
RT_ASSERT(device != RT_NULL);
RT_ASSERT(configure != RT_NULL);
struct swm_spi *spi_drv = rt_container_of(device->bus, struct swm_spi, spi_bus);
spi_drv->configure = configure;
return swm_spi_init(spi_drv, configure);
}
const static struct rt_spi_ops swm_spi_ops =
{
.configure = swm_spi_configure,
.xfer = swm_spi_xfer,
};
//cannot be used before completion init
rt_err_t rt_hw_spi_device_attach(const char *bus_name, const char *device_name, GPIO_TypeDef *cs_gpiox, uint32_t cs_gpio_pin)
{
RT_ASSERT(bus_name != RT_NULL);
RT_ASSERT(device_name != RT_NULL);
rt_err_t result;
struct rt_spi_device *spi_device;
struct swm_spi_cs *cs_pin;
GPIO_Init(cs_gpiox, cs_gpio_pin, 1, 0, 0);
GPIO_SetBit(cs_gpiox, cs_gpio_pin);
spi_device = (struct rt_spi_device *)rt_malloc(sizeof(struct rt_spi_device));
RT_ASSERT(spi_device != RT_NULL);
cs_pin = (struct swm_spi_cs *)rt_malloc(sizeof(struct swm_spi_cs));
RT_ASSERT(cs_pin != RT_NULL);
cs_pin->GPIOx = cs_gpiox;
cs_pin->gpio_pin = cs_gpio_pin;
result = rt_spi_bus_attach_device(spi_device, device_name, bus_name, (void *)cs_pin);
if (result != RT_EOK)
{
LOG_E("%s attach to %s faild, %d\n", device_name, bus_name, result);
}
RT_ASSERT(result == RT_EOK);
LOG_D("%s attach to %s done", device_name, bus_name);
return result;
}
int rt_hw_spi_init(void)
{
rt_err_t result;
#ifdef BSP_USING_SPI0
PORT_Init(PORTA, PIN9, FUNMUX1_SPI0_SCLK, 0);
PORT_Init(PORTA, PIN10, FUNMUX0_SPI0_MOSI, 0);
PORT_Init(PORTA, PIN11, FUNMUX1_SPI0_MISO, 1);
#endif //BSP_USING_SPI0
#ifdef BSP_USING_SPI1
PORT_Init(PORTC, PIN7, FUNMUX1_SPI1_SCLK, 0);
PORT_Init(PORTC, PIN6, FUNMUX0_SPI1_MOSI, 0);
PORT_Init(PORTC, PIN5, FUNMUX1_SPI1_MISO, 1);
#endif //BSP_USING_SPI1
for (int i = 0; i < sizeof(spi_cfg) / sizeof(spi_cfg[0]); i++)
{
spi_bus_drv[i].cfg = &spi_cfg[i];
spi_bus_drv[i].spi_bus.parent.user_data = &spi_cfg[i];
result = rt_spi_bus_register(&spi_bus_drv[i].spi_bus, spi_cfg[i].name, &swm_spi_ops);
RT_ASSERT(result == RT_EOK);
LOG_D("%s bus init done", spi_config[i].bus_name);
}
return result;
}
INIT_BOARD_EXPORT(rt_hw_spi_init);
#endif /* BSP_USING_SPI */
#endif /* RT_USING_SPI */
View Git Blame Copy Permalink