426 lines
13 KiB
C
426 lines
13 KiB
C
/*
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2020 NXP
|
|
* All rights reserved.
|
|
*
|
|
* SPDX-License-Identifier: BSD-3-Clause
|
|
*/
|
|
#ifndef _FSL_RTWDOG_H_
|
|
#define _FSL_RTWDOG_H_
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup rtwdog
|
|
* @{
|
|
*/
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
*******************************************************************************/
|
|
/*! @name Unlock sequence */
|
|
/*@{*/
|
|
#define WDOG_FIRST_WORD_OF_UNLOCK (RTWDOG_UPDATE_KEY & 0xFFFFU) /*!< First word of unlock sequence */
|
|
#define WDOG_SECOND_WORD_OF_UNLOCK ((RTWDOG_UPDATE_KEY >> 16U) & 0xFFFFU) /*!< Second word of unlock sequence */
|
|
/*@}*/
|
|
|
|
/*! @name Refresh sequence */
|
|
/*@{*/
|
|
#define WDOG_FIRST_WORD_OF_REFRESH (RTWDOG_REFRESH_KEY & 0xFFFFU) /*!< First word of refresh sequence */
|
|
#define WDOG_SECOND_WORD_OF_REFRESH ((RTWDOG_REFRESH_KEY >> 16U) & 0xFFFFU) /*!< Second word of refresh sequence */
|
|
/*@}*/
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief RTWDOG driver version 2.1.2. */
|
|
#define FSL_RTWDOG_DRIVER_VERSION (MAKE_VERSION(2, 1, 2))
|
|
/*@}*/
|
|
|
|
/*! @brief Describes RTWDOG clock source. */
|
|
typedef enum _rtwdog_clock_source
|
|
{
|
|
kRTWDOG_ClockSource0 = 0U, /*!< Clock source 0 */
|
|
kRTWDOG_ClockSource1 = 1U, /*!< Clock source 1 */
|
|
kRTWDOG_ClockSource2 = 2U, /*!< Clock source 2 */
|
|
kRTWDOG_ClockSource3 = 3U, /*!< Clock source 3 */
|
|
} rtwdog_clock_source_t;
|
|
|
|
/*! @brief Describes the selection of the clock prescaler. */
|
|
typedef enum _rtwdog_clock_prescaler
|
|
{
|
|
kRTWDOG_ClockPrescalerDivide1 = 0x0U, /*!< Divided by 1 */
|
|
kRTWDOG_ClockPrescalerDivide256 = 0x1U, /*!< Divided by 256 */
|
|
} rtwdog_clock_prescaler_t;
|
|
|
|
/*! @brief Defines RTWDOG work mode. */
|
|
typedef struct _rtwdog_work_mode
|
|
{
|
|
bool enableWait; /*!< Enables or disables RTWDOG in wait mode */
|
|
bool enableStop; /*!< Enables or disables RTWDOG in stop mode */
|
|
bool enableDebug; /*!< Enables or disables RTWDOG in debug mode */
|
|
} rtwdog_work_mode_t;
|
|
|
|
/*! @brief Describes RTWDOG test mode. */
|
|
typedef enum _rtwdog_test_mode
|
|
{
|
|
kRTWDOG_TestModeDisabled = 0U, /*!< Test Mode disabled */
|
|
kRTWDOG_UserModeEnabled = 1U, /*!< User Mode enabled */
|
|
kRTWDOG_LowByteTest = 2U, /*!< Test Mode enabled, only low byte is used */
|
|
kRTWDOG_HighByteTest = 3U, /*!< Test Mode enabled, only high byte is used */
|
|
} rtwdog_test_mode_t;
|
|
|
|
/*! @brief Describes RTWDOG configuration structure. */
|
|
typedef struct _rtwdog_config
|
|
{
|
|
bool enableRtwdog; /*!< Enables or disables RTWDOG */
|
|
rtwdog_clock_source_t clockSource; /*!< Clock source select */
|
|
rtwdog_clock_prescaler_t prescaler; /*!< Clock prescaler value */
|
|
rtwdog_work_mode_t workMode; /*!< Configures RTWDOG work mode in debug stop and wait mode */
|
|
rtwdog_test_mode_t testMode; /*!< Configures RTWDOG test mode */
|
|
bool enableUpdate; /*!< Update write-once register enable */
|
|
bool enableInterrupt; /*!< Enables or disables RTWDOG interrupt */
|
|
bool enableWindowMode; /*!< Enables or disables RTWDOG window mode */
|
|
uint16_t windowValue; /*!< Window value */
|
|
uint16_t timeoutValue; /*!< Timeout value */
|
|
} rtwdog_config_t;
|
|
|
|
/*!
|
|
* @brief RTWDOG interrupt configuration structure.
|
|
*
|
|
* This structure contains the settings for all of the RTWDOG interrupt configurations.
|
|
*/
|
|
enum _rtwdog_interrupt_enable_t
|
|
{
|
|
kRTWDOG_InterruptEnable = RTWDOG_CS_INT_MASK, /*!< Interrupt is generated before forcing a reset */
|
|
};
|
|
|
|
/*!
|
|
* @brief RTWDOG status flags.
|
|
*
|
|
* This structure contains the RTWDOG status flags for use in the RTWDOG functions.
|
|
*/
|
|
enum _rtwdog_status_flags_t
|
|
{
|
|
kRTWDOG_RunningFlag = RTWDOG_CS_EN_MASK, /*!< Running flag, set when RTWDOG is enabled */
|
|
kRTWDOG_InterruptFlag = RTWDOG_CS_FLG_MASK, /*!< Interrupt flag, set when interrupt occurs */
|
|
};
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
*******************************************************************************/
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif /* __cplusplus */
|
|
|
|
/*!
|
|
* @name RTWDOG Initialization and De-initialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initializes the RTWDOG configuration structure.
|
|
*
|
|
* This function initializes the RTWDOG configuration structure to default values. The default
|
|
* values are:
|
|
* @code
|
|
* rtwdogConfig->enableRtwdog = true;
|
|
* rtwdogConfig->clockSource = kRTWDOG_ClockSource1;
|
|
* rtwdogConfig->prescaler = kRTWDOG_ClockPrescalerDivide1;
|
|
* rtwdogConfig->workMode.enableWait = true;
|
|
* rtwdogConfig->workMode.enableStop = false;
|
|
* rtwdogConfig->workMode.enableDebug = false;
|
|
* rtwdogConfig->testMode = kRTWDOG_TestModeDisabled;
|
|
* rtwdogConfig->enableUpdate = true;
|
|
* rtwdogConfig->enableInterrupt = false;
|
|
* rtwdogConfig->enableWindowMode = false;
|
|
* rtwdogConfig->windowValue = 0U;
|
|
* rtwdogConfig->timeoutValue = 0xFFFFU;
|
|
* @endcode
|
|
*
|
|
* @param config Pointer to the RTWDOG configuration structure.
|
|
* @see rtwdog_config_t
|
|
*/
|
|
void RTWDOG_GetDefaultConfig(rtwdog_config_t *config);
|
|
|
|
/*!
|
|
* @brief Initializes the RTWDOG module.
|
|
*
|
|
* This function initializes the RTWDOG.
|
|
* To reconfigure the RTWDOG without forcing a reset first, enableUpdate must be set to true
|
|
* in the configuration.
|
|
*
|
|
* Example:
|
|
* @code
|
|
* rtwdog_config_t config;
|
|
* RTWDOG_GetDefaultConfig(&config);
|
|
* config.timeoutValue = 0x7ffU;
|
|
* config.enableUpdate = true;
|
|
* RTWDOG_Init(wdog_base,&config);
|
|
* @endcode
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param config The configuration of the RTWDOG.
|
|
*/
|
|
|
|
#if defined(DOXYGEN_OUTPUT) && DOXYGEN_OUTPUT
|
|
void RTWDOG_Init(RTWDOG_Type *base, const rtwdog_config_t *config);
|
|
#else
|
|
AT_QUICKACCESS_SECTION_CODE(void RTWDOG_Init(RTWDOG_Type *base, const rtwdog_config_t *config));
|
|
#endif
|
|
|
|
/*!
|
|
* @brief De-initializes the RTWDOG module.
|
|
*
|
|
* This function shuts down the RTWDOG.
|
|
* Ensure that the WDOG_CS.UPDATE is 1, which means that the register update is enabled.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
*/
|
|
void RTWDOG_Deinit(RTWDOG_Type *base);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name RTWDOG functional Operation
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enables the RTWDOG module.
|
|
*
|
|
* This function writes a value into the WDOG_CS register to enable the RTWDOG.
|
|
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
*/
|
|
static inline void RTWDOG_Enable(RTWDOG_Type *base)
|
|
{
|
|
base->CS |= RTWDOG_CS_EN_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables the RTWDOG module.
|
|
*
|
|
* This function writes a value into the WDOG_CS register to disable the RTWDOG.
|
|
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address
|
|
*/
|
|
static inline void RTWDOG_Disable(RTWDOG_Type *base)
|
|
{
|
|
base->CS &= ~RTWDOG_CS_EN_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables the RTWDOG interrupt.
|
|
*
|
|
* This function writes a value into the WDOG_CS register to enable the RTWDOG interrupt.
|
|
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param mask The interrupts to enable.
|
|
* The parameter can be a combination of the following source if defined:
|
|
* @arg kRTWDOG_InterruptEnable
|
|
*/
|
|
static inline void RTWDOG_EnableInterrupts(RTWDOG_Type *base, uint32_t mask)
|
|
{
|
|
base->CS |= mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Disables the RTWDOG interrupt.
|
|
*
|
|
* This function writes a value into the WDOG_CS register to disable the RTWDOG interrupt.
|
|
* The WDOG_CS register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param mask The interrupts to disabled.
|
|
* The parameter can be a combination of the following source if defined:
|
|
* @arg kRTWDOG_InterruptEnable
|
|
*/
|
|
static inline void RTWDOG_DisableInterrupts(RTWDOG_Type *base, uint32_t mask)
|
|
{
|
|
base->CS &= ~mask;
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the RTWDOG all status flags.
|
|
*
|
|
* This function gets all status flags.
|
|
*
|
|
* Example to get the running flag:
|
|
* @code
|
|
* uint32_t status;
|
|
* status = RTWDOG_GetStatusFlags(wdog_base) & kRTWDOG_RunningFlag;
|
|
* @endcode
|
|
* @param base RTWDOG peripheral base address
|
|
* @return State of the status flag: asserted (true) or not-asserted (false). @see _rtwdog_status_flags_t
|
|
* - true: related status flag has been set.
|
|
* - false: related status flag is not set.
|
|
*/
|
|
static inline uint32_t RTWDOG_GetStatusFlags(RTWDOG_Type *base)
|
|
{
|
|
return (base->CS & (RTWDOG_CS_EN_MASK | RTWDOG_CS_FLG_MASK));
|
|
}
|
|
|
|
/*!
|
|
* @brief Enables/disables the window mode.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param enable Enables(true) or disables(false) the feature.
|
|
*/
|
|
static inline void RTWDOG_EnableWindowMode(RTWDOG_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->CS |= RTWDOG_CS_WIN_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->CS &= ~RTWDOG_CS_WIN_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Converts raw count value to millisecond.
|
|
*
|
|
* Note that if the clock frequency is too high the timeout period can be less than 1 ms.
|
|
* In this case this api will return 0 value.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param count Raw count value.
|
|
* @param clockFreqInHz The frequency of the clock source RTWDOG uses.
|
|
*/
|
|
static inline uint32_t RTWDOG_CountToMesec(RTWDOG_Type *base, uint32_t count, uint32_t clockFreqInHz)
|
|
{
|
|
if ((base->CS & RTWDOG_CS_PRES_MASK) != 0U)
|
|
{
|
|
clockFreqInHz /= 256U;
|
|
}
|
|
return count * 1000U / clockFreqInHz;
|
|
}
|
|
|
|
/*!
|
|
* @brief Clears the RTWDOG flag.
|
|
*
|
|
* This function clears the RTWDOG status flag.
|
|
*
|
|
* Example to clear an interrupt flag:
|
|
* @code
|
|
* RTWDOG_ClearStatusFlags(wdog_base,kRTWDOG_InterruptFlag);
|
|
* @endcode
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param mask The status flags to clear.
|
|
* The parameter can be any combination of the following values:
|
|
* @arg kRTWDOG_InterruptFlag
|
|
*/
|
|
void RTWDOG_ClearStatusFlags(RTWDOG_Type *base, uint32_t mask);
|
|
|
|
/*!
|
|
* @brief Sets the RTWDOG timeout value.
|
|
*
|
|
* This function writes a timeout value into the WDOG_TOVAL register.
|
|
* The WDOG_TOVAL register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address
|
|
* @param timeoutCount RTWDOG timeout value, count of RTWDOG clock ticks.
|
|
*/
|
|
static inline void RTWDOG_SetTimeoutValue(RTWDOG_Type *base, uint16_t timeoutCount)
|
|
{
|
|
base->TOVAL = timeoutCount;
|
|
}
|
|
|
|
/*!
|
|
* @brief Sets the RTWDOG window value.
|
|
*
|
|
* This function writes a window value into the WDOG_WIN register.
|
|
* The WDOG_WIN register is a write-once register. Ensure that the WCT window is still open and
|
|
* this register has not been written in this WCT while the function is called.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @param windowValue RTWDOG window value.
|
|
*/
|
|
static inline void RTWDOG_SetWindowValue(RTWDOG_Type *base, uint16_t windowValue)
|
|
{
|
|
base->WIN = windowValue;
|
|
}
|
|
|
|
/*!
|
|
* @brief Unlocks the RTWDOG register written.
|
|
*
|
|
* This function unlocks the RTWDOG register written.
|
|
*
|
|
* Before starting the unlock sequence and following the configuration, disable the global interrupts.
|
|
* Otherwise, an interrupt could effectively invalidate the unlock sequence and the WCT may expire.
|
|
* After the configuration finishes, re-enable the global interrupts.
|
|
*
|
|
* @param base RTWDOG peripheral base address
|
|
*/
|
|
__STATIC_FORCEINLINE void RTWDOG_Unlock(RTWDOG_Type *base)
|
|
{
|
|
if (((base->CS) & RTWDOG_CS_CMD32EN_MASK) != 0U)
|
|
{
|
|
base->CNT = RTWDOG_UPDATE_KEY;
|
|
}
|
|
else
|
|
{
|
|
base->CNT = WDOG_FIRST_WORD_OF_UNLOCK;
|
|
base->CNT = WDOG_SECOND_WORD_OF_UNLOCK;
|
|
}
|
|
while ((base->CS & RTWDOG_CS_ULK_MASK) == 0U)
|
|
{
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Refreshes the RTWDOG timer.
|
|
*
|
|
* This function feeds the RTWDOG.
|
|
* This function should be called before the Watchdog timer is in timeout. Otherwise, a reset is asserted.
|
|
*
|
|
* @param base RTWDOG peripheral base address
|
|
*/
|
|
static inline void RTWDOG_Refresh(RTWDOG_Type *base)
|
|
{
|
|
uint32_t primaskValue = 0U;
|
|
primaskValue = DisableGlobalIRQ();
|
|
if (((base->CS) & RTWDOG_CS_CMD32EN_MASK) != 0U)
|
|
{
|
|
base->CNT = RTWDOG_REFRESH_KEY;
|
|
}
|
|
else
|
|
{
|
|
base->CNT = WDOG_FIRST_WORD_OF_REFRESH;
|
|
base->CNT = WDOG_SECOND_WORD_OF_REFRESH;
|
|
}
|
|
EnableGlobalIRQ(primaskValue);
|
|
}
|
|
|
|
/*!
|
|
* @brief Gets the RTWDOG counter value.
|
|
*
|
|
* This function gets the RTWDOG counter value.
|
|
*
|
|
* @param base RTWDOG peripheral base address.
|
|
* @return Current RTWDOG counter value.
|
|
*/
|
|
static inline uint16_t RTWDOG_GetCounterValue(RTWDOG_Type *base)
|
|
{
|
|
return (uint16_t)base->CNT;
|
|
}
|
|
|
|
/*@}*/
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif /* __cplusplus */
|
|
|
|
/*! @}*/
|
|
|
|
#endif /* _FSL_RTWDOG_H_ */
|