314 lines
7.9 KiB
C
314 lines
7.9 KiB
C
/*
|
|
* Copyright (c) 2006-2023, RT-Thread Development Team
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*
|
|
* Change Logs:
|
|
* Date Author Notes
|
|
* 2009-02-05 Bernard first version
|
|
* 2009-10-25 Bernard fix rt_serial_read bug when there is no data
|
|
* in the buffer.
|
|
* 2010-03-29 Bernard cleanup code.
|
|
* 2010-03-30 Kyle Ported from STM32 to AVR32.
|
|
* 2023-10-25 Raman Gopalan UART driver for at32uc3a: Initial version
|
|
* 2023-11-06 Raman Gopalan Driver abstractions for uc3a and uc3b devices
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
#include <rtdevice.h>
|
|
#include "drv_uart.h"
|
|
|
|
#ifdef RT_USING_SERIAL
|
|
|
|
#include "compiler.h"
|
|
#include "usart.h"
|
|
#include "gpio.h"
|
|
#include "intc.h"
|
|
|
|
#if !defined(BSP_USING_UART0) && !defined(BSP_USING_UART1)
|
|
#error "Please define at least one BSP_USING_UARTx"
|
|
/* this driver can be disabled at menuconfig -> RT-Thread Components -> Device Drivers */
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART0
|
|
void avr32uc3_uart0_isr(void);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
void avr32uc3_uart1_isr(void);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
void avr32uc3_uart2_isr(void);
|
|
#endif
|
|
|
|
/* AVR32UC3B uart driver */
|
|
struct avr32uc3_uart_dev
|
|
{
|
|
rt_serial_t parent;
|
|
avr32_usart_t *instance;
|
|
rt_uint32_t irqno;
|
|
rt_uint32_t irq_level;
|
|
rt_uint32_t tx_pin;
|
|
rt_uint32_t tx_pin_function;
|
|
rt_uint32_t rx_pin;
|
|
rt_uint32_t rx_pin_function;
|
|
void (*uart_isr)(void);
|
|
};
|
|
|
|
static struct avr32uc3_uart_dev uart_dev[] =
|
|
{
|
|
#ifdef BSP_USING_UART0
|
|
{
|
|
.instance = (avr32_usart_t *)&AVR32_USART0,
|
|
.irqno = AVR32_USART0_IRQ,
|
|
.irq_level = AVR32_INTC_INT0,
|
|
.tx_pin = BSP_UART0_TX_PIN,
|
|
.tx_pin_function = BSP_UART0_TX_PIN_FUNCTION,
|
|
.rx_pin = BSP_UART0_RX_PIN,
|
|
.rx_pin_function = BSP_UART0_RX_PIN_FUNCTION,
|
|
.uart_isr = avr32uc3_uart0_isr,
|
|
},
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
{
|
|
.instance = (avr32_usart_t *)&AVR32_USART1,
|
|
.irqno = AVR32_USART1_IRQ,
|
|
.irq_level = AVR32_INTC_INT0,
|
|
.tx_pin = BSP_UART1_TX_PIN,
|
|
.tx_pin_function = BSP_UART1_TX_PIN_FUNCTION,
|
|
.rx_pin = BSP_UART1_RX_PIN,
|
|
.rx_pin_function = BSP_UART1_RX_PIN_FUNCTION,
|
|
.uart_isr = avr32uc3_uart1_isr,
|
|
},
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
{
|
|
.instance = (avr32_usart_t *)&AVR32_USART2,
|
|
.irqno = AVR32_USART2_IRQ,
|
|
.irq_level = AVR32_INTC_INT0,
|
|
.tx_pin = BSP_UART2_TX_PIN,
|
|
.tx_pin_function = BSP_UART2_TX_PIN_FUNCTION,
|
|
.rx_pin = BSP_UART2_RX_PIN,
|
|
.rx_pin_function = BSP_UART2_RX_PIN_FUNCTION,
|
|
.uart_isr = avr32uc3_uart2_isr,
|
|
},
|
|
#endif
|
|
};
|
|
|
|
enum
|
|
{
|
|
#ifdef BSP_USING_UART0
|
|
UART0_INDEX,
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
UART1_INDEX,
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
UART2_INDEX,
|
|
#endif
|
|
};
|
|
|
|
#ifdef BSP_USING_UART0
|
|
void avr32uc3_uart0_isr(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
/* read interrupt status and clear it */
|
|
if (usart_test_hit(&AVR32_USART0)) /* rx ind */
|
|
{
|
|
rt_hw_serial_isr(&uart_dev[UART0_INDEX].parent, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
void avr32uc3_uart1_isr(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
/* read interrupt status and clear it */
|
|
if (usart_test_hit(&AVR32_USART1)) /* rx ind */
|
|
{
|
|
rt_hw_serial_isr(&uart_dev[UART1_INDEX].parent, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
void avr32uc3_uart2_isr(void)
|
|
{
|
|
rt_interrupt_enter();
|
|
/* read interrupt status and clear it */
|
|
if (usart_test_hit(&AVR32_USART2)) /* rx ind */
|
|
{
|
|
rt_hw_serial_isr(&uart_dev[UART2_INDEX].parent, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
rt_interrupt_leave();
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* @addtogroup AVR32UC3
|
|
*/
|
|
/*@{*/
|
|
|
|
static rt_err_t avr32uc3_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
struct avr32uc3_uart_dev *uart = RT_NULL;
|
|
unsigned char l_parity;
|
|
unsigned short l_stop;
|
|
unsigned long l_baud;
|
|
unsigned char l_data_bits;
|
|
|
|
RT_ASSERT(serial != RT_NULL);
|
|
RT_ASSERT(cfg != RT_NULL);
|
|
|
|
uart = rt_container_of(serial, struct avr32uc3_uart_dev, parent);
|
|
// Set the TX and RX pins by using the function select on the GPIO
|
|
// Set datasheet for more information on function select
|
|
gpio_enable_module_pin(uart->tx_pin, uart->tx_pin_function);
|
|
gpio_enable_module_pin(uart->rx_pin, uart->rx_pin_function);
|
|
|
|
/* Parity settings */
|
|
if (cfg->parity == PARITY_ODD)
|
|
l_parity = USART_ODD_PARITY;
|
|
else if (cfg->parity == PARITY_EVEN)
|
|
l_parity = USART_EVEN_PARITY;
|
|
else
|
|
l_parity = USART_NO_PARITY;
|
|
|
|
/* Stopbit settings */
|
|
if (cfg->stop_bits == STOP_BITS_1)
|
|
l_stop = USART_1_STOPBIT;
|
|
else
|
|
l_stop = USART_2_STOPBITS;
|
|
|
|
l_baud = cfg->baud_rate;
|
|
l_data_bits = cfg->data_bits;
|
|
|
|
/* Populate */
|
|
usart_options_t usart_options = {
|
|
.baudrate = l_baud,
|
|
.charlength = l_data_bits,
|
|
.paritytype = l_parity,
|
|
.stopbits = l_stop,
|
|
.channelmode = USART_NORMAL_CHMODE
|
|
};
|
|
|
|
usart_init_rs232(uart->instance, &usart_options, FPBA);
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t avr32uc3_uart_control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
struct avr32uc3_uart_dev *uart = RT_NULL;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = rt_container_of(serial, struct avr32uc3_uart_dev, parent);
|
|
|
|
switch (cmd)
|
|
{
|
|
/* enable interrupt */
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
// Set up a RX interrupt
|
|
// We need to set up the handler first
|
|
// And set up and enable the interrupt handlers
|
|
//INTC_init_interrupts();
|
|
INTC_register_interrupt(uart->uart_isr, uart->irqno, uart->irq_level);
|
|
uart->instance->ier = AVR32_USART_IER_RXRDY_MASK;
|
|
break;
|
|
}
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int avr32uc3_uart_putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
struct avr32uc3_uart_dev *uart = RT_NULL;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = rt_container_of(serial, struct avr32uc3_uart_dev, parent);
|
|
usart_putchar(uart->instance, c);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int avr32uc3_uart_getc(struct rt_serial_device *serial)
|
|
{
|
|
struct avr32uc3_uart_dev *uart = RT_NULL;
|
|
RT_ASSERT(serial != RT_NULL);
|
|
uart = rt_container_of(serial, struct avr32uc3_uart_dev, parent);
|
|
|
|
int ch;
|
|
if (usart_read_char(uart->instance, &ch) == USART_SUCCESS)
|
|
return ch;
|
|
|
|
return -1;
|
|
}
|
|
|
|
const static struct rt_uart_ops _uart_ops =
|
|
{
|
|
avr32uc3_uart_configure,
|
|
avr32uc3_uart_control,
|
|
avr32uc3_uart_putc,
|
|
avr32uc3_uart_getc,
|
|
RT_NULL,
|
|
};
|
|
|
|
/*
|
|
* UART Initiation
|
|
*/
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
rt_err_t ret = RT_EOK;
|
|
|
|
struct serial_configure config = RT_SERIAL_CONFIG_DEFAULT;
|
|
|
|
#ifdef BSP_USING_UART0
|
|
uart_dev[UART0_INDEX].parent.ops = &_uart_ops;
|
|
uart_dev[UART0_INDEX].parent.config = config;
|
|
|
|
ret = rt_hw_serial_register(&uart_dev[UART0_INDEX].parent,
|
|
"uart0",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart_dev[UART0_INDEX]);
|
|
RT_ASSERT(ret == RT_EOK);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART1
|
|
uart_dev[UART1_INDEX].parent.ops = &_uart_ops;
|
|
uart_dev[UART1_INDEX].parent.config = config;
|
|
|
|
ret = rt_hw_serial_register(&uart_dev[UART1_INDEX].parent,
|
|
"uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart_dev[UART1_INDEX]);
|
|
RT_ASSERT(ret == RT_EOK);
|
|
#endif
|
|
|
|
#ifdef BSP_USING_UART2
|
|
uart_dev[UART2_INDEX].parent.ops = &_uart_ops;
|
|
uart_dev[UART2_INDEX].parent.config = config;
|
|
|
|
ret = rt_hw_serial_register(&uart_dev[UART2_INDEX].parent,
|
|
"uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX,
|
|
&uart_dev[UART2_INDEX]);
|
|
RT_ASSERT(ret == RT_EOK);
|
|
#endif
|
|
|
|
|
|
return ret;
|
|
}
|
|
|
|
#endif /* RT_USING_SERIAL */
|
|
|
|
/*@}*/
|