rt-thread/bsp/synwit/swm341/libraries/SWM341_StdPeriph_Driver/SWM341_can.h

122 lines
4.2 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

#ifndef __SWM341_CAN_H__
#define __SWM341_CAN_H__
typedef struct {
uint8_t Mode; //CAN_MODE_NORMAL、CAN_MODE_LISTEN、CAN_MODE_SELFTEST
uint8_t CAN_bs1; //CAN_BS1_1tq、CAN_BS1_2tq、... ... 、CAN_BS1_16tq
uint8_t CAN_bs2; //CAN_BS2_1tq、CAN_BS2_2tq、... ... 、CAN_BS2_8tq
uint8_t CAN_sjw; //CAN_SJW_1tq、CAN_SJW_2tq、CAN_SJW_3tq、CAN_SJW_4tq
uint32_t Baudrate; //波特率即位传输速率取值1--1000000
uint8_t RXNotEmptyIEn; //接收FIFO非空有数据可读
uint8_t ArbitrLostIEn; //控制器丢失仲裁变成接收方
uint8_t ErrPassiveIEn; //接收/发送错误计数值达到127
} CAN_InitStructure;
#define CAN_MODE_NORMAL 0 //常规模式
#define CAN_MODE_LISTEN 1 //监听模式
#define CAN_MODE_SELFTEST 2 //自测模式
#define CAN_BS1_1tq 0
#define CAN_BS1_2tq 1
#define CAN_BS1_3tq 2
#define CAN_BS1_4tq 3
#define CAN_BS1_5tq 4
#define CAN_BS1_6tq 5
#define CAN_BS1_7tq 6
#define CAN_BS1_8tq 7
#define CAN_BS1_9tq 8
#define CAN_BS1_10tq 9
#define CAN_BS1_11tq 10
#define CAN_BS1_12tq 11
#define CAN_BS1_13tq 12
#define CAN_BS1_14tq 13
#define CAN_BS1_15tq 14
#define CAN_BS1_16tq 15
#define CAN_BS2_1tq 0
#define CAN_BS2_2tq 1
#define CAN_BS2_3tq 2
#define CAN_BS2_4tq 3
#define CAN_BS2_5tq 4
#define CAN_BS2_6tq 5
#define CAN_BS2_7tq 6
#define CAN_BS2_8tq 7
#define CAN_SJW_1tq 0
#define CAN_SJW_2tq 1
#define CAN_SJW_3tq 2
#define CAN_SJW_4tq 3
#define CAN_FRAME_STD 0
#define CAN_FRAME_EXT 1
#define CAN_FILTER_1 0
#define CAN_FILTER_2 1
#define CAN_FILTER_3 2
#define CAN_FILTER_4 3
#define CAN_FILTER_5 4
#define CAN_FILTER_6 5
#define CAN_FILTER_7 6
#define CAN_FILTER_8 7
#define CAN_FILTER_9 8
#define CAN_FILTER_10 9
#define CAN_FILTER_11 10
#define CAN_FILTER_12 11
#define CAN_FILTER_13 12
#define CAN_FILTER_14 13
#define CAN_FILTER_15 14
#define CAN_FILTER_16 15
/* Interrupt Type */
#define CAN_IT_RX_NOTEMPTY (0x01 << 0) //RX Buffer Not Empty
#define CAN_IT_RX_OVERFLOW (0x01 << 3) //RX Buffer Overflow
#define CAN_IT_TX_EMPTY (0x01 << 1) //TX Buffer Empty
#define CAN_IT_ARBLOST (0x01 << 6) //Arbitration lost
#define CAN_IT_ERR (0x01 << 7)
#define CAN_IT_ERR_WARN (0x01 << 2) //TXERR/RXERR计数值达到Error Warning Limit
#define CAN_IT_ERR_PASS (0x01 << 5) //TXERR/RXERR计数值达到127
#define CAN_IT_WAKEUP (0x01 << 4)
typedef struct {
uint32_t id; //消息ID
uint8_t format; //帧格式CAN_FRAME_STD、CAN_FRAME_EXT
uint8_t remote; //消息是否为远程帧
uint8_t size; //接收到的数据个数
uint8_t data[8]; //接收到的数据
} CAN_RXMessage;
void CAN_Init(CAN_TypeDef * CANx, CAN_InitStructure * initStruct);
void CAN_Open(CAN_TypeDef * CANx);
void CAN_Close(CAN_TypeDef * CANx);
void CAN_Transmit(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint8_t data[], uint32_t size, uint32_t once);
void CAN_TransmitRequest(CAN_TypeDef * CANx, uint32_t format, uint32_t id, uint32_t once);
void CAN_Receive(CAN_TypeDef * CANx, CAN_RXMessage *msg);
uint32_t CAN_TXComplete(CAN_TypeDef * CANx);
uint32_t CAN_TXSuccess(CAN_TypeDef * CANx);
void CAN_AbortTransmit(CAN_TypeDef * CANx);
uint32_t CAN_TXBufferReady(CAN_TypeDef * CANx);
uint32_t CAN_RXDataAvailable(CAN_TypeDef * CANx);
void CAN_SetBaudrate(CAN_TypeDef * CANx, uint32_t baudrate, uint32_t CAN_bs1, uint32_t CAN_bs2, uint32_t CAN_sjw);
void CAN_SetFilter32b(CAN_TypeDef * CANx, uint32_t filter, uint32_t check, uint32_t mask);
void CAN_SetFilter16b(CAN_TypeDef * CANx, uint32_t filter, uint16_t check1, uint16_t mask1, uint16_t check2, uint16_t mask2);
void CAN_INTEn(CAN_TypeDef * CANx, uint32_t it);
void CAN_INTDis(CAN_TypeDef * CANx, uint32_t it);
void CAN_INTClr(CAN_TypeDef * CANx, uint32_t it);
uint32_t CAN_INTStat(CAN_TypeDef * CANx);
#endif //__SWM341_CAN_H__