325 lines
7.7 KiB
C
325 lines
7.7 KiB
C
/*
|
|
* Copyright (c) 2018, Synopsys, Inc.
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <rthw.h>
|
|
#include <rtthread.h>
|
|
|
|
#include <rtdevice.h>
|
|
#include <drivers/serial.h>
|
|
|
|
#include "rt_board.h"
|
|
#include "arc/arc_timer.h"
|
|
#include "arc/arc_exception.h"
|
|
|
|
#include "embARC_error.h"
|
|
|
|
static rt_err_t _configure(struct rt_serial_device *serial, struct serial_configure *cfg)
|
|
{
|
|
DEV_UART_PTR uart;
|
|
unsigned int id;
|
|
int ret;
|
|
|
|
id = (unsigned int)(serial->parent.user_data);
|
|
|
|
uart = uart_get_dev(id);
|
|
|
|
ret = uart->uart_control(UART_CMD_SET_BAUD, (void *)(cfg->baud_rate));
|
|
|
|
if (ret != E_OK) {
|
|
return RT_ERROR;
|
|
}
|
|
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static rt_err_t _control(struct rt_serial_device *serial, int cmd, void *arg)
|
|
{
|
|
DEV_UART_PTR uart;
|
|
unsigned int id;
|
|
|
|
id = (unsigned int)(serial->parent.user_data);
|
|
uart = uart_get_dev(id);
|
|
|
|
switch (cmd) {
|
|
case RT_DEVICE_CTRL_CLR_INT:
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)0);
|
|
break;
|
|
case RT_DEVICE_CTRL_SET_INT:
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)1);
|
|
break;
|
|
case RT_DEVICE_CTRL_SUSPEND:
|
|
uart->uart_control(UART_CMD_DIS_DEV, (void *)0);
|
|
break;
|
|
case RT_DEVICE_CTRL_RESUME:
|
|
uart->uart_control(UART_CMD_ENA_DEV, (void *)0);
|
|
break;
|
|
|
|
default:
|
|
return RT_ERROR;
|
|
break;
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
static int _putc(struct rt_serial_device *serial, char c)
|
|
{
|
|
DEV_UART_PTR uart;
|
|
unsigned int id;
|
|
int ret;
|
|
|
|
id = (unsigned int)(serial->parent.user_data);
|
|
|
|
uart = uart_get_dev(id);
|
|
|
|
ret = uart->uart_write(&c, 1);
|
|
|
|
if (ret < 0) {
|
|
return -1;
|
|
} else {
|
|
return 1;
|
|
}
|
|
}
|
|
|
|
static int _getc(struct rt_serial_device *serial)
|
|
{
|
|
DEV_UART_PTR uart;
|
|
unsigned int id;
|
|
unsigned int data;
|
|
int ret;
|
|
int rd_avail = 0;
|
|
|
|
id = (unsigned int)(serial->parent.user_data);
|
|
uart = uart_get_dev(id);
|
|
|
|
uart->uart_control(UART_CMD_GET_RXAVAIL, (void *)(&rd_avail));
|
|
|
|
if (rd_avail > 0) {
|
|
ret = uart->uart_read(&data, 1);
|
|
} else {
|
|
return -1;
|
|
}
|
|
|
|
if (ret < 0) {
|
|
return -1;
|
|
} else {
|
|
return data;
|
|
}
|
|
|
|
}
|
|
|
|
static const struct rt_uart_ops uart_ops =
|
|
{
|
|
_configure,
|
|
_control,
|
|
_putc,
|
|
_getc,
|
|
};
|
|
|
|
static struct rt_serial_device uart0;
|
|
static struct rt_serial_device uart1;
|
|
static struct rt_serial_device uart2;
|
|
static struct rt_serial_device uart3;
|
|
|
|
static void uart0_isr(void *ptr)
|
|
{
|
|
rt_hw_serial_isr((struct rt_serial_device*)&uart0, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
static void uart1_isr(void *ptr)
|
|
{
|
|
rt_hw_serial_isr((struct rt_serial_device*)&uart1, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
static void uart2_isr(void *ptr)
|
|
{
|
|
rt_hw_serial_isr((struct rt_serial_device*)&uart2, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
static void uart3_isr(void *ptr)
|
|
{
|
|
rt_hw_serial_isr((struct rt_serial_device*)&uart3, RT_SERIAL_EVENT_RX_IND);
|
|
}
|
|
|
|
|
|
int rt_hw_uart_init(void)
|
|
{
|
|
DEV_UART_PTR uart;
|
|
struct serial_configure config;
|
|
int ret;
|
|
|
|
config.baud_rate = BAUD_RATE_115200;
|
|
config.bit_order = BIT_ORDER_LSB;
|
|
config.data_bits = DATA_BITS_8;
|
|
config.parity = PARITY_NONE;
|
|
config.stop_bits = STOP_BITS_1;
|
|
config.invert = NRZ_NORMAL;
|
|
config.bufsz = RT_SERIAL_RB_BUFSZ;
|
|
|
|
uart0.ops = &uart_ops;
|
|
uart0.config = config;
|
|
|
|
uart1.ops = &uart_ops;
|
|
uart1.config = config;
|
|
|
|
uart2.ops = &uart_ops;
|
|
uart2.config = config;
|
|
|
|
uart3.ops = &uart_ops;
|
|
uart3.config = config;
|
|
|
|
/* uart0 init */
|
|
uart = uart_get_dev(0);
|
|
|
|
if (uart != NULL) {
|
|
/* default format: 8bits, no parity, 1 stop bits */
|
|
ret = uart->uart_open(config.baud_rate);
|
|
|
|
if (ret != E_OPNED && ret != E_OK) {
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* enable rx int */
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)0);
|
|
/* use customized int isr */
|
|
uart->uart_control(UART_CMD_SET_RXCB, uart0_isr);
|
|
uart->uart_control(UART_CMD_SET_RXINT_BUF, NULL);
|
|
|
|
rt_hw_serial_register(&uart0, "uart0",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
|
|
(void *)0);
|
|
}
|
|
|
|
/* uart1 init */
|
|
uart = uart_get_dev(1);
|
|
|
|
if (uart != NULL) {
|
|
/* default format: 8bits, no parity, 1 stop bits */
|
|
ret = uart->uart_open(config.baud_rate);
|
|
|
|
if (ret != E_OPNED && ret != E_OK) {
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* enable rx int */
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)0);
|
|
/* use customized int isr */
|
|
uart->uart_control(UART_CMD_SET_RXCB, uart1_isr);
|
|
uart->uart_control(UART_CMD_SET_RXINT_BUF, NULL);
|
|
|
|
rt_hw_serial_register(&uart1, "uart1",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
|
|
(void *)1);
|
|
}
|
|
|
|
/* uart2 init */
|
|
uart = uart_get_dev(2);
|
|
|
|
if (uart != NULL) {
|
|
/* default format: 8bits, no parity, 1 stop bits */
|
|
ret = uart->uart_open(config.baud_rate);
|
|
|
|
if (ret != E_OPNED && ret != E_OK) {
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* enable rx int */
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)0);
|
|
/* use customized int isr */
|
|
uart->uart_control(UART_CMD_SET_RXCB, uart2_isr);
|
|
uart->uart_control(UART_CMD_SET_RXINT_BUF, NULL);
|
|
|
|
rt_hw_serial_register(&uart2, "uart2",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
|
|
(void *)2);
|
|
}
|
|
|
|
/* uart3 init */
|
|
uart = uart_get_dev(3);
|
|
|
|
if (uart != NULL) {
|
|
/* default format: 8bits, no parity, 1 stop bits */
|
|
ret = uart->uart_open(config.baud_rate);
|
|
|
|
if (ret != E_OPNED && ret != E_OK) {
|
|
return RT_ERROR;
|
|
}
|
|
|
|
/* enable rx int */
|
|
uart->uart_control(UART_CMD_SET_RXINT, (void *)0);
|
|
/* use customized int isr */
|
|
uart->uart_control(UART_CMD_SET_RXCB, uart3_isr);
|
|
uart->uart_control(UART_CMD_SET_RXINT_BUF, NULL);
|
|
|
|
rt_hw_serial_register(&uart3, "uart3",
|
|
RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX | RT_DEVICE_FLAG_STREAM,
|
|
(void *)3);
|
|
}
|
|
|
|
return RT_EOK;
|
|
}
|
|
|
|
#if defined BOARD_EMSK
|
|
#define CONSOLE_UART "uart1"
|
|
struct rt_serial_device *console_uart = &uart1;
|
|
#elif defined BOARD_IOTDK || defined BOARD_EMSDP || defined BOARD_NSIM
|
|
#define CONSOLE_UART "uart0"
|
|
struct rt_serial_device *console_uart = &uart0;
|
|
#elif defined BOARD_AXS
|
|
#define CONSOLE_UART "uart2"
|
|
struct rt_serial_device *console_uart = &uart2;
|
|
#elif defined BOARD_HSDK
|
|
#define CONSOLE_UART "uart3"
|
|
struct rt_serial_device *console_uart = &uart3;
|
|
#else
|
|
#error "no supported board selected!"
|
|
#endif
|
|
|
|
void rt_hw_console_output(const char *str)
|
|
{
|
|
while(*str != '\0')
|
|
{
|
|
if (*str == '\n') {
|
|
_putc(console_uart,'\r');
|
|
}
|
|
_putc(console_uart,*str);
|
|
str++;
|
|
}
|
|
}
|
|
|
|
void rt_hw_board_init()
|
|
{
|
|
rt_hw_uart_init();
|
|
rt_components_board_init();
|
|
rt_console_set_device(CONSOLE_UART);
|
|
}
|
|
|
|
|
|
|
|
static void rt_hw_timer_isr(int vector, void *param)
|
|
{
|
|
timer_int_clear(BOARD_OS_TIMER_ID);
|
|
rt_tick_increase();
|
|
}
|
|
|
|
int rt_hw_timer_init(void)
|
|
{
|
|
|
|
unsigned int cyc = BOARD_CPU_CLOCK / RT_TICK_PER_SECOND;
|
|
|
|
int_disable(BOARD_OS_TIMER_INTNO); /* disable os timer interrupt */
|
|
timer_stop(BOARD_OS_TIMER_ID);
|
|
timer_start(BOARD_OS_TIMER_ID, TIMER_CTRL_IE | TIMER_CTRL_NH, cyc);
|
|
|
|
int_handler_install(BOARD_OS_TIMER_INTNO, (INT_HANDLER_T)rt_hw_timer_isr);
|
|
int_pri_set(BOARD_OS_TIMER_INTNO, INT_PRI_MIN + 1); /* currently, firq(INT_PRI_MIN) not supported*/
|
|
int_enable(BOARD_OS_TIMER_INTNO);
|
|
|
|
return 0;
|
|
}
|
|
INIT_BOARD_EXPORT(rt_hw_timer_init);
|