..
config
[stm32f072 nucleo] support pwm for arduino ( #5693 )
2022-03-21 22:04:37 +08:00
drv_flash
[update] add fal component. ( #5662 )
2022-03-15 09:48:05 +08:00
Kconfig
[add] crc, rng, hash and cryp driver for smt32mp1.
2020-11-26 14:31:08 +08:00
SConscript
[bsp][stm32] move drv_tinyusb.c to tfx2001/tinyusb
2021-11-15 12:54:02 +08:00
drv_adc.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_can.c
[fix] The baud rate is configured according to the different APB1 frequencies. f4-series only.
2021-08-25 08:37:49 +08:00
drv_can.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_common.c
[stm32][drv_common] add LOW_E for Error_Handler
2021-12-12 23:45:29 -05:00
drv_common.h
Merge branch 'fudfe' into gitee_master
2021-04-08 21:19:30 +08:00
drv_config.h
[update] add stm32u575-st-nucleo bsp.
2021-11-15 11:23:12 +08:00
drv_crypto.c
[stm32][driver_crypto]修复CRC自定义设置不生效的bug ( #5655 )
2022-03-23 14:17:10 +08:00
drv_crypto.h
[drivers][crypto]add device CRC/RNG
2019-07-18 10:26:31 +08:00
drv_dac.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_dma.h
[update] ignore_format.yml
2021-11-15 15:31:51 +08:00
drv_eth.c
[eth] replace rt_memcpy with SMEMCPY
2021-08-03 10:29:17 +08:00
drv_eth.h
Merge pull request #4910 from Ouxiaolong/master
2021-08-17 12:54:03 +08:00
drv_gpio.c
[arduino][stm32l475 pandora] fullly support analog output(PWM) and analog input(ADC) ( #5690 )
2022-03-20 15:46:33 +08:00
drv_gpio.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_hwtimer.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_lcd.c
[qmeu] chore
2022-01-16 18:54:24 +08:00
drv_lcd_mipi.c
Refresh using dma2d,screen refresh average 25fps
2022-01-13 10:18:33 +08:00
drv_log.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_lptim.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_lptim.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_pm.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_pulse_encoder.c
format code ( #5699 )
2022-03-24 08:30:41 +08:00
drv_pwm.c
[stm32f072 nucleo] support pwm for arduino ( #5693 )
2022-03-21 22:04:37 +08:00
drv_qspi.c
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_qspi.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_rtc.c
[ulog][rtc][time][bug] solve the interference when enable the ulog timestamp ( #5687 )
2022-03-21 14:06:17 +08:00
drv_sdio.c
[mutex] use RT_IPC_FLAG_PRIO to replace RT_IPC_FLAG_FIFO
2021-11-17 15:57:15 -05:00
drv_sdio.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_sdram.c
完善ART-PI BSP
2021-09-27 17:42:30 +08:00
drv_soft_i2c.c
format code ( #5699 )
2022-03-24 08:30:41 +08:00
drv_soft_i2c.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_spi.c
完善了STM32H7系列SPI使用DMA的驱动
2021-12-10 15:30:30 +08:00
drv_spi.h
[add] spi config increases irq_type
2021-04-23 09:55:31 +08:00
drv_usart.c
避免警告，变量可能未初始化就使用 ( #5544 )
2022-01-21 11:06:37 +08:00
drv_usart.h
[update] add stm32u575-st-nucleo bsp.
2021-11-15 11:23:12 +08:00
drv_usart_v2.c
完善串口 V2 框架 ( #5720 )
2022-03-27 00:52:41 +08:00
drv_usart_v2.h
修复STM32串口mask问题
2021-10-14 10:15:55 +08:00
drv_usbd.c
[update] Fix STM32 USB driver matching hal library version
2021-10-19 11:03:18 +08:00
drv_usbh.c
修改bsp的usb host 驅動 ( #4379 )
2022-01-26 10:46:57 +08:00
drv_usbh.h
[stm32][driver] auto formatted
2021-03-08 22:40:39 +08:00
drv_wdt.c
[bsp/stm32/libraries/HAL_Drivers/drv_wdt.c]: add SOC_SERIES_STM32G0 to use "stm32_wdt.hiwdg.Init.Window = 0x00000FFF", otherwise the watchdog always reset.
2021-11-02 14:37:42 +08:00
bae1be0f45