683 lines
29 KiB
Markdown
683 lines
29 KiB
Markdown
# Change Log
|
|
|
|
## [1.2.0] - 2023-06-30:
|
|
|
|
Main changes since 1.1.0
|
|
|
|
Tested Segger Embedded Studio Version: 7.22
|
|
|
|
### Changed:
|
|
- boards: hpm6750evk*: decrease core frequency from 816MHz to 648MHz
|
|
- openocd: soc: hpm6280: simplify dual core release core1 approach.
|
|
- cmake: segger: configure optimization level according to gcc level.
|
|
- soc: dmamux: move it from ip to soc
|
|
- soc: interrupt: adjust irq api. #659
|
|
- soc: improve svd file
|
|
- soc: hpm_soc_feature.h: remove ADC16_SOC_TEMP_CH_EN for some specified Socs
|
|
- components: enet_phy: update the common enet phy header file
|
|
- components: sgtl5000 and wm8960: update clock setting
|
|
- drivers: uart: update uart driver
|
|
- drivers: pdma: improve quality of scale
|
|
- drivers: adc: adjust wait_dis type in adc16_config_t struct
|
|
- drivers: enet: update rmii reference clock setting API for ENET
|
|
- utils: hpm_swap: escape for andes toolchain.
|
|
- middleware: hpm_sdmmc: add spi sdcard
|
|
- middleware: motor_ctrl: change the file organization
|
|
- middleware: motor_ctrl: remove slide control content from foc
|
|
- middleware: lvgl: upgrade to v8.3.5 (with pdma)
|
|
- middleware: lvgl: Add direct mode
|
|
- middleware: cherryusb: update version to v0.8.0
|
|
- samples: I2S_DMA and I2S Interrupt: update sample behavior
|
|
- samples: cherryusb: hid host: separate mouse and keyboard urb
|
|
- samples: cherryusb: increase max interface and endpoint number Configuration
|
|
- samples: cherryusb: uac2: move setting sampling freq to isr
|
|
- samples: cherryusb: audio: update descriptor for identification
|
|
- samples: audio_codec: set codec voice to max and increase irq priority
|
|
- samples: multicore: lvgl_coremark: delete custom linker files and using andes toolchain
|
|
- samples: lvgl_audio_player: update CMakeLists.txt to using noncacheable framebuffer
|
|
- samples: spi: clean the redundant code
|
|
- samples: i2c: improve the processing of FIFO in ISR
|
|
- samples: drivers: uart: update uart_rx_timeout demo
|
|
- samples: drivers: gptmr: split sample into multiple function samples
|
|
- samples: drivers: adc: optimization for all macro definitions in applications
|
|
- samples: drivers: adc: update struct member names
|
|
- samples: update clock divider setting for ADC-related examples
|
|
- samples: cherryusb: move vid/pid etc definition to usb_config.h
|
|
- samples: cherryusb: device: update vid to hpmicro 0x34B7
|
|
- samples: cherryusb: change API update for v0.8
|
|
- samples: cherryusb: device: audiov1: change to full speed mode
|
|
- samples: tinyusb: uac2: update descriptor and sample
|
|
- samples: lwip: disable mmc interrupt settings
|
|
- samples: lwip: lwip_ptp: v1: sync precision improvement
|
|
|
|
### Added:
|
|
- cmake: toolchains: add isa spec 20191213 support.
|
|
- cmake: ses: support set ses raw option in CMakeLists.txt
|
|
- cmake: add option to specify board search path.
|
|
- cmake: generate compile_commands.json file
|
|
- soc: hpm_soc_feature: add a common macro for ADC12 and ADC16
|
|
- drivers: cam: add new APIs
|
|
- drivers: spi: add new APIs
|
|
- drivers: i2c: add new APIs
|
|
- drivers: I2S: add i2s_check_data_line_status API
|
|
- drivers: dma: add dma_set_transfer_src_width_byte_size() API
|
|
- drivers: gptmr: add output capture APIs
|
|
- drivers: gptmr: add gptmr_channel_get_dma_request_event api
|
|
- drivers: adc: add adc16_trigger_pmt_by_sw API
|
|
- drivers: enet: add some APIs related to interrupt settings
|
|
- drivers: enet: add a new API for transmisstion
|
|
- drivers: usb: add macro CONFIG_USB_DEVICE_FS to set full speed mode
|
|
- components: uart_lin: add uart lin component
|
|
- components: add smbus
|
|
- components: add sccb
|
|
- middleware: lvgl: add macro HPM_LVGL_FRAMEBUFFER_NONCACHEABLE
|
|
- middleware: add AzureRTOS (threadx/usbx/netx/guix)
|
|
- middleware: hpm_mcl: sensorless over-zero
|
|
- middleware: add smc
|
|
- middleware: hpm_sdmmc Add eMMC support
|
|
- middleware: hpm_math: add bit conversion function
|
|
- middleware: add uC/OS-III
|
|
- middleware: cherryusb: audio: add feedback descriptor
|
|
- middleware: cherryusb: audio: add param to set endpoint bmAttributes
|
|
- middleware: microros: add microros foxy sources
|
|
- samples: drivers: spi: add spi_sdcard_fatfs sample
|
|
- samples: drivers: spi: add sd sample
|
|
- samples: add uart_lin
|
|
- samples: motor_ctrl: sensorless: over-zero demo
|
|
- samples: cherryusb: add rndis host dhcp samples
|
|
- samples: drivers: sdxc :emmc Added eMMC sample
|
|
- samples: drivers: adc12: update irq pattern for sequence usage
|
|
- samples: drivers: pla: add pla tamagawa demo
|
|
- samples: drivers: gptmr: add counter_sync sample
|
|
- samples: drivers: gptmr: add timer_basic sample
|
|
- samples: drivers: gptmr: add t_shape_accel_decel sample
|
|
- samples: drivers: dma/gptmr: add trigger dma transfer using gptmr event sample
|
|
- samples: drivers: uart add uart_rx_timeout sample
|
|
- samples: i2c: add smbus samples
|
|
- samples: lwip: lwip_tcpecho_freertos: add self-adaption
|
|
- samples: cherryusb: hid host: move usbh_submit_urb() out of condition
|
|
- samples: cherryusb: add composite freertos sample
|
|
- samples: cherryusb: add rndis freertos sample
|
|
- samples: cherryusb: add msc freertos sample
|
|
- samples: cherryusb: add audio v2 mic speaker freertos sample
|
|
- samples: cherryusb: add hid mouse freertos sample
|
|
- samples: cherryusb: add hid keyboard freertos sample
|
|
- samples: cherryusb: add cdc acm freertos sample
|
|
- samples: cherryusb: add rndis tcp server sample
|
|
- samples: cherryusb: add rndis device udp_echo sample
|
|
- samples: cherryusb: add rndis device http_server sample
|
|
- samples: cherryusb: device: add audio_v2_speaker_sync sample
|
|
- samples: add several uC/OS-III samples
|
|
- samples: smc: add smc demo
|
|
- samples: microros: add subscriber, sevice and publisher
|
|
- samples: uC/OS-III: mutex
|
|
|
|
### Fixed:
|
|
- cmake: ses: fix __SEGGER_RTL_vfprintf issue with nds tool in SES 7.20.
|
|
- soc: hpm6280: Modify the number of PWM cmps.
|
|
- soc: reset.c: __dso_handle needs to be declared for nds toolchain.
|
|
- soc: fix max buffer length in sequence mode for ADC
|
|
- soc: HPM6750: enet soc drv: fix set clock delay settings
|
|
- soc:hpm6360:sdxc Correct clock divider settting issue
|
|
- drivers: pla: missing Union Field
|
|
- drivers: spi: fix the problem of CMD and ADDR configuration order
|
|
- drivers: i2c: fix clock frequency error rate problem
|
|
- drivers: i2c: clear CMPL bit in API to avoid blocking the trans
|
|
- drivers: i2c: fix i2c slave device read and write fail
|
|
- drivers: i2c: fix read data unexpected multi transition.
|
|
- drivers: i2c: fix w1c clear status error
|
|
- driver: usb: fix w1c clear flag error
|
|
- drivers: gptmr: fix dma request enum definition
|
|
- drivers: adc: fix logics for judging the validity of arguments
|
|
- component: uart_lin: fix break signal problem
|
|
- middleware: cherryusb: fix buffer size error
|
|
- middleware: lvgl: fix fbbuffer option
|
|
- samples: gptmr: fix pwm_measure sample compile waring
|
|
- samples: jpeg: fix interchange format of exif support
|
|
- samples: jpeg: fix jpeg decode
|
|
- samples: drivers: spi: fix the problem of CMD and ADDR configuration order
|
|
- samples: drivers: mcan: can_fd loopback test setting is incorrect
|
|
- samples: cherryusb: http_server_freertos: fix printf content error
|
|
- samples: cherryusb: audio: change endpoint attributes for support MACBOOK
|
|
- samples: tinyusb: msc: increase block numbers for windows format
|
|
- samples: lwip: lwip_httpsrv: fix reload or refresh error
|
|
|
|
## [1.1.0] - 2023-03-31:
|
|
|
|
Main changes since 1.0.0
|
|
|
|
Tested Segger Embedded Studio Version: 7.10
|
|
|
|
### Changed:
|
|
- docs: add new docs for rtd project.
|
|
- soc: ip: enet: update the enet register file
|
|
- soc: ip: adc16: update the adc16 header file
|
|
- soc: hpm_romapi - Add APIs for configuring remapping, exip regions
|
|
- drivers: enet: improve APIs related to PPS
|
|
- drivers: adc: change adc bus blocking interface
|
|
- drivers: adc: optimize getting oneshot result
|
|
- drivers: src: update the default config for ADC12&ADC16
|
|
- boards: rename board-level APIs related to enet
|
|
- components: enet_phy: rtl8201: update the register file
|
|
- middleware: hpm_math: update dsp version
|
|
- middleware: erpc: update to v1.10.0
|
|
- samples: uart: rename uart_dma_rx_idle to uart_software_rx_idle
|
|
- samples: uart: add hardware rx idle detection sample
|
|
- samples: multicore: erpc: core1 add sdk_compile_options(-O1)
|
|
- samples: drivers: gptmr: update sample output.
|
|
- samples: lwip: common: arch: ethernetif: update a calling function name
|
|
- samples:drivers: adc: optimize oneshot handler
|
|
|
|
### Added:
|
|
- arch: add FPU related APIs
|
|
- soc/board: add HPM6280 support
|
|
- soc: HPM6750: acmp: add ACMP section
|
|
- components: add mt9m114 support
|
|
- drivers: add raw8 pixel format support
|
|
- drivers: csr - Implement CSR driver
|
|
- drivers: adc: adc16: support resolution setting
|
|
- drivers/samples: add SDM/PLA/CRC/MCAN
|
|
- drivers: I2C: add new API
|
|
- drivers: adc: adc16: support resolution setting
|
|
- drivers: enet: add enet control config for transmission
|
|
- middleware: cherryusb: audio: update class driver and demo template
|
|
- middleware: add mbedtls lib files with SDP acceleration
|
|
- freeRTOS: add support for static allocation
|
|
- samples: drivers: enet: add a pps demo
|
|
- samples: cherryusb: add audio samples
|
|
- samples: add the resolution parameter in all demos with ADC16
|
|
- samples: add rfft demo
|
|
- sampels: i2c: add interrupt b2b samples
|
|
- samples: drivers: i2s: add an i2s_master demo
|
|
- samples: drivers: i2s: add an i2s_slave demo
|
|
- samples : rom_api : add sw_gm_api filter
|
|
- samples: add the resolution parameter in all demos with ADC16
|
|
|
|
### Fixed:
|
|
- openocd: hpm6300evk: update sdram initialization.
|
|
- drivers: trgmux: trigmux edge filter setting error
|
|
- drivers: enet: fix register access error
|
|
- drivers: adc16: fix the config error of ADC16_CONFIG1
|
|
- drivers: i2c: fix i2c timing configuration
|
|
- drivers: SPI: fix SPI status API
|
|
- drivers: fix gptmr cmp value don't minus one
|
|
- drivers: mcan: correct the mcan ext_id filter issue
|
|
- drivers: I2C: fix issue in i2c_master_address_read API
|
|
- drivers: Self_ACK cannot be set in CAN driver
|
|
- drivers: rtc rtc_config_alarm always return error code
|
|
- cmake: correct source code compilation
|
|
- soc: toolchain: gcc: initialize heap for SES
|
|
- soc: gcc linker files: add NOLOAD keyword to noncacheable.bss section
|
|
- soc: HPM6360: gcc: ld: correct noncacheable region name.
|
|
- drivers: qei: Fix speed display always zero
|
|
- middleware: freertos: disable global irq before vTaskStartScheduler
|
|
- freeRTOS: fix trap when enable float feature
|
|
- freeRTOS: fix tick lost
|
|
- freeRTOS: fix segger project build warning
|
|
- samples: drivers: i2s: fix CFGR config
|
|
- samples: drivers: fix acmp toggle error
|
|
- samples: lwip: fix the DHCP issue
|
|
- samples: uart: fix irq_id judgment
|
|
- samples: fix the order of uart pin configuration and clock configuration
|
|
- samples: update spi dma sample
|
|
- samples: drivers: sysctl: correct reset enable approach.
|
|
- samples: fix dma_general_transfer sample memory out of bounds
|
|
- samples: drivers: wdog: Fix logic issue on finding the nearest interrupt interval
|
|
- sample: audio_codec: decoder_wav: add '\0' to fatfs path
|
|
|
|
## [1.00.0] - 2022-12-31:
|
|
|
|
Main changes since 0.14.0
|
|
|
|
Tested Segger Embedded Studio Version: 7.10
|
|
|
|
### Changed:
|
|
- boards: add version info in banner.
|
|
- board: lcdc: move panel para to board
|
|
- components: spi component to support to transfer different width of data in dma handshake mode
|
|
- drivers: rename dram to femc
|
|
- middleware: cherryusb update to v0.7.0
|
|
- middleware: erpc: update for support rtos
|
|
- middleware: hpm_mcl: update api naming
|
|
- samples: erpc: rename erpc_matrix_multiply_rpmsg to erpc_matrix_multiply_rpmsg_bm
|
|
- samples: erpc: reorganize erpc_matrix_multiply_rpmsg samples
|
|
- samples: erpc: move samples folder to erpc_matrix_multiply_rpmsg
|
|
- samples: update i2c/spi dma channel and dmamux channel definition
|
|
- ses: project template: use demo.* as output file naming.
|
|
- soc: HPM6750: toolchains: update linker files
|
|
- soc: HPM6360: toolchains: update linker files
|
|
|
|
### Added:
|
|
- arch: riscv: add read_clear_csr() API
|
|
- component: add wm8960 support
|
|
- component: add usb device iso transfer support
|
|
- drivers: hpm_common: include hpm_sdk_version.h.
|
|
- drivers: common: add NOP and WFI.
|
|
- drivers: uart: add api to recv/send byte directly.
|
|
- soc: HPM6750 linker files: rename rpmsg_sh_mem to sh_mem
|
|
- cmake: add sdk version header file generation.
|
|
- middleware: tinyusb: add audio class
|
|
- middleware: hpm_math: add NN library
|
|
- samples: erpc: add erpc_two_way_rpc_rpmsg_rtos sample
|
|
- samples: erpc: add erpc_matrix_multiply_rpmsg_rtos sample
|
|
- samples: add power mode switch demo. #282
|
|
- samples: drivers: adc: add a temperature measurement demo
|
|
- samples: drviers: femc: add sram sample
|
|
- samples: lwip demo for FreeRTOS
|
|
- samples: lwip demo of interrupt usage
|
|
- samples: tinyusb: add uac2 demo
|
|
- samples: tflm: add face detection demo
|
|
- samples: tflm: add MLPerf Tiny benchmark demo
|
|
- samples: lwip: common: feature: add a LPI interrupt process
|
|
|
|
### Fixed:
|
|
- drivers:interrupt: Fix FPU context crashing in nested irq case
|
|
- drivers: src: adc: fix adc result in period mode
|
|
- segger: update app directory structure in SES.
|
|
- soc: disable irq during cache maintenance
|
|
- middleware: lvgl: fps calculation to No.
|
|
- samples: get off level based on board api.
|
|
- samples: multicore: hello: core1 rgb led does not change correctly.
|
|
|
|
## [0.14.0] - 2022-10-31:
|
|
|
|
Main changes since 0.13.0
|
|
|
|
Tested Segger Embedded Studio Version: 6.34a
|
|
|
|
### Changed:
|
|
- drivers: inc: update adc driver
|
|
- drivers: gptmr: update reload value
|
|
- components: enet_phy: optimize APIs
|
|
- components: enet_phy: dp83867: rename functions
|
|
- components: conditionally add debug_console
|
|
- middleware: add cherryusb (0.6.0)
|
|
- middleware: littlevgl: update to v8.3.1
|
|
- middleware: fatfs: file name encoding in utf-8
|
|
- middleware: freertos: support nested irq handling
|
|
- middleware: hpm_mcl: Optimized motor control foc speed
|
|
- samples: drivers: dma src move to dma_general_transfer folder
|
|
- samples: lwip: update all static addresses and all gateway addresses
|
|
- samples: lwip: lwip_iperf: optimize the interactive log
|
|
- samples: tinyusb: device: hid_generic_inout: optimize the python script
|
|
- openocd: HPM6750A1 silicon in hpm6750-dual-core.cfg
|
|
- header file: update the enet/conctl register files
|
|
- header file: Update TRGMUX0 pin input source definition
|
|
- header file: update the ADC12 header files
|
|
- scripts: ses: organize file in ses according to real path.
|
|
- cmake: split gcc and ses source
|
|
- board: bump HPM6750 DCDC voltage to 1200mv
|
|
|
|
### Fixed:
|
|
- drivers: pdma: fix scale api issue
|
|
- drivers: i2c: update DATACNT processing
|
|
- drivers: i2s: fix i2s interrupt workaround in i2s_init
|
|
- drivers: pwm: fix pwm capture function error
|
|
- drivers: pwm: fix pwm capture configuration error
|
|
- drivers: clock: fix error in clock_set_xxx_source
|
|
- drivers: wdg: timeout calculation error
|
|
- drivers: trgm_drv: bugfix: include error
|
|
- drivers: romapi: call fencei after flash erase/write operation
|
|
- drivers: watchdog: overflow
|
|
- drivers: usb: host controller initialization issue
|
|
- drivers: i2s: i2s_enable() issue fix
|
|
- middleware: tinyusb: src: class: fix the HID report desc macro
|
|
- samples: drivers: adc: optimize all ADC demos
|
|
- samples: drivers: adc: fix all channel initializations without a default value
|
|
- samples: motor_ctrl: hardware trigger api usage error
|
|
- samples: audio_codec: update clock process for 44100 sample rate
|
|
- samples: lcdc: boundary pixel is incorrenct
|
|
- samples: multicore: BOOT_HEADER was missing in multicore core0 example
|
|
- samples: drivers: i2s: correct audio data if depth < 32bit.
|
|
- samples: hpm_math: fft_perf_test: Fix error printing information
|
|
- samples: fix pdm2dao noise problem
|
|
- samples: lwip: fix the enet throughput degradation
|
|
- soc: correct address overlapping SES XIP linker file
|
|
- soc: correct the interrupt context switch issue
|
|
- soc: fix Lack of interrupt claim for swi
|
|
- boards: fix some rmii reference clock APIs
|
|
|
|
### Added:
|
|
- boards: add hpm6750evk2 support
|
|
- soc: add initfini.c
|
|
- drivers: lcdc: add y8 support
|
|
- drivers: spi: update data_length processing
|
|
- drivers: spi: add api to enable/disable spi dma request
|
|
- drivers: pmp: Add pmp_config_entry API
|
|
- components: add ipc_event_mgr
|
|
- component: spi: add cache maintain
|
|
- middleware: add erpc
|
|
- samples: lwip: support self-adaptive port speed and duplex mode
|
|
- samples: jpeg: support grayscale
|
|
- samples: drivers: spi: use api to get data length
|
|
- samples: drivers: spi: add interrupt b2b sample
|
|
- samples: drivers: mbx: add singlecore samples
|
|
- samples: drivers: add dma circle transfer
|
|
- samples: drivers: pwm: add pwm capture demo
|
|
- samples: provide OTP API demo
|
|
- samples: add cherryusb hid/msc/cdc samples
|
|
- samples: add Guomi API example
|
|
- samples: add erpc sample
|
|
- samples: add segger_rtt
|
|
|
|
## [0.13.0] - 2022-07-31:
|
|
|
|
Main changes since 0.12.1
|
|
|
|
### Changed:
|
|
- drivers: adc: fix sequence and preemption mode
|
|
- drivers: usb: automatically change transceiver type in host mode
|
|
- drivers: pwm: modify the interface for setting the pwm shadow register trigger function
|
|
- drivers: sdxc: driver improvement
|
|
- samples: jpeg demo update
|
|
- samples: motor_ctrl: Optimize motor control performance
|
|
- samples: motor_ctrl: Modify the pwm update method to be hardware triggered
|
|
- samples: audio_codec: wav: Modify the interface
|
|
- samples: audio_codec: add dao support
|
|
- samples: tinyusb: update all USB project names
|
|
- samples: adc: place DMA buffer in noncacheable
|
|
- components: usb: update two struct definitions for the hcd_data_t and the dcd_data_t
|
|
- middleware: littlevgl: update double buffer refresh approach.
|
|
- middleware: fatfs: enable exfat format
|
|
- middleware: fatfs: change 'USB' to lowercase
|
|
- middleware: hpm_math: remove cache operations from the ffa interface
|
|
- scripts: ses: update file path using $(HPM_SDK_BASE)
|
|
|
|
### Fixed:
|
|
- drivers: gpiom: fix spelling errors in API names
|
|
- drivers: enet: fix ptp time offset update
|
|
- drivers: cam: fix store mode configuration
|
|
- drivers: can: Fix the issue can timestamp cannot be enabled
|
|
- drivers: gpio: incorrect return type gpio_get_port_interrupt_flags.
|
|
- middleware: audio_codec: decoder_wav: fix wav codec problem
|
|
- middleware: tinyusb: fix the alignment of _hcd_data
|
|
- soc: driver: clock: i2s get clock error
|
|
- soc: hpm_misc.h: fix incorrect system address mapping.
|
|
- soc: SVD files: fix SDP peripheral reset value problem
|
|
- soc: disable vector mode explicitly.
|
|
- boards: correct device name in ses project
|
|
- board: correct the printf format for frequency and register base
|
|
- python: fix ses project generation on windows
|
|
- samples: adc: fix not working in sequence mode and preemption mode
|
|
- ses: set obj path for common configuration.
|
|
- cmake: ses: put app source into separate category in ses.
|
|
|
|
### Added:
|
|
- components: enet_phy: add rtl8211 driver
|
|
- components: hpm_spi: add initial SPI component
|
|
- components: add DMA Manager
|
|
- drivers: cam: add new API
|
|
- drivers: uart: add uart_set_baudrate API
|
|
- drivers: spi: update dma transfer API
|
|
- samples: tinyusb: host: add a hid demo
|
|
- samples: drivers: spi: add master_trans_large_amount_of_data example
|
|
- samples: decoder_wav: Add support for different bit rates and bits
|
|
- samples: drivers: audio: automatic acquisition of i2s clock frequency
|
|
- middleware: tinyusb: update portable file for USB host
|
|
|
|
## [0.12.1] - 2022-07-01:
|
|
|
|
Main changes since 0.12.0
|
|
|
|
### Fixed:
|
|
- update lwipopt.h for updated enet driver
|
|
|
|
## [0.12.0] - 2022-06-30:
|
|
|
|
Tested with SES 6.32
|
|
|
|
Main changes since 0.11.0
|
|
|
|
### Changed:
|
|
- boards: hpm6360evk has been renamed to hpm6300evk
|
|
- boards: Use CSR_CYCLE in the clock_delay function
|
|
- soc: hpm_soc.h: include hpm_common.h
|
|
- driver: rename hpm_pmu_drv.c to hpm_pcfg_drv.h
|
|
- driver: spi: change to non-blocking interfaces
|
|
- driver: dma: update driver to adapt to different DMA instance constraints
|
|
- components: enet_phy: update dp83867 driver
|
|
- components: enet_phy: remove rtl8211 driver
|
|
- cmake: enable nano newlib by default
|
|
- cmake: move distclean to the beginning
|
|
- middleware: littlevgl enable PDMA by default
|
|
- middleware: tinyusb: upgrade to 0.13.0
|
|
- samples: tinyusb: device: cdc_msc: adjust buffer size
|
|
- samples: drivers: plic: use gpio toggle count as nested irq
|
|
|
|
### Fixed:
|
|
- drivers: pwm: fix function name inconsistency bug
|
|
- drivers: enet: remove "board.h" in enet driver
|
|
- drivers: clock: Fix bugs in hpm6360 clock driver
|
|
- drivers: clock: returns wrong adc/dac clock in HPM6360
|
|
- drivers: dram: failed to configure 8bit mode.
|
|
- freertos: fix issue about running on core1
|
|
- boards: hpm6300evk pmp_entry set initial value
|
|
- middleware: littlevgl: fix pdma cache op issue
|
|
- middleware: littlevgl: fix doxygen markdown for pdma driver
|
|
- middleware: lvgl: ses: update ram linker.
|
|
- middleware: hpm_math: fix ffa cache size error
|
|
- samples: audio_codec: remove the wrong dependency
|
|
- samples: FATFS demo cannot support write/read if FATFS passes unaligned buffer address
|
|
|
|
### Added:
|
|
- samples: add memstress and flash stress
|
|
- drivers: clock: add implement common delay function based on mcycle and mcycleh register
|
|
- boards: add hpm6300evk support
|
|
- boards: hpm6750evkmini: motor control support
|
|
- soc: add svd files
|
|
- middleware: lwip: iperf: enable iperf and add udp function
|
|
- samples: lwip: add lwip_iperf
|
|
|
|
## [0.11.0] - 2022-05-31:
|
|
Main changes since 0.10.0-hpm6360-er
|
|
|
|
### Changed:
|
|
- readme: change the location of the starting document
|
|
- components: change hal_adc_xx to hpm_adc_xx
|
|
- drivers: update the I2C driver
|
|
- cmake: change default rv_arch to rv32imac
|
|
- cmake: modified in a zephyr-compatible way
|
|
- drivers: uart: redefined struct with zephyr
|
|
- cmake: change soc and board name
|
|
- cmake: ses: support enable ext_dsp in project file.
|
|
- samples/tinyusb/host: optimize the toggle rate of the blinking led
|
|
- samples/tinyusb/device: replace mchtimer with board_timer for led_linking_taskk
|
|
- samples/tinyusb/device: optimize the implement of led_blinking_task
|
|
- soc: update IP header and soc header files
|
|
|
|
### Fixed:
|
|
- samples: motor_ctrl: bldc_block: fix some error
|
|
- middleware: hpm_math: fix andes toolchain compile error
|
|
- middleware: hpm_math: fix libdsp.a error
|
|
- middleware: hpm_math: add ext-dsp for SES
|
|
- samples: openocd_algo: fix func_table placement.
|
|
- boards: hpm6360evk: correct cpu frequency
|
|
- boards: fix warning caused by code irregularities
|
|
- boards: LED status is not the same between hpm6750mini rev-A and rev-B
|
|
- boards: update board_led_write.
|
|
|
|
## Added:
|
|
- driver: add spi_setup_dma_transfer() API
|
|
- middleware: hpm_math: add software fft function
|
|
- middleware: hpm_math: add ffa to hpm_math
|
|
- samples: i2c: update the sample b2b
|
|
- samples: hpm_math: add fft_performance demo
|
|
- samples: add SPI DMA sample
|
|
- samples: multicore coremark using debug console only
|
|
- samples: 1588: add ptp v1 master/slave
|
|
|
|
## [0.10.0_hpm6300] - 2022-05-16:
|
|
Main changes since 0.10.0
|
|
|
|
### Changed:
|
|
- ip register header file update
|
|
- ses_proj: using generated complete cpu_regs_xml to replace general cpu registers xml
|
|
- drivers: gpiom: move gpiom_gpio_t into hpm_gpiom_src.h
|
|
- drivers: update the enet driver
|
|
- samples: dram: change sdram test address in dma demo
|
|
- samples: drivers: mbx: exclude flash targets for core0 as well.
|
|
- samples: lwip: update ethernetif.c
|
|
|
|
### Fixed:
|
|
- drivers: ptpc: update ptpc_init_timer_with_initial.
|
|
- drivers: can: bug fix and update
|
|
- soc: correct vector table inclusion and swi name
|
|
- env.sh: fix HPM_SDK_BASE setting problem with msys.
|
|
- samples: sha256_example: failed to run case 13 and 14 with gcc.
|
|
|
|
### Added:
|
|
- soc: add HPM6360 support
|
|
- drivers: add ffa, pllctlv2, dac
|
|
- boards: add hpm6360evk support
|
|
- components: add adcx module
|
|
- components/enet_phy: add the RTL8201 driver
|
|
- samples: drivers: dac, ffa
|
|
- samples: rgb_red: add evkmini ver B support
|
|
|
|
## [0.10.0] - 2022-04-30:
|
|
Main changes since 0.9.0
|
|
|
|
### Changed:
|
|
- drivers: gptmr: split irq enable/disable interface
|
|
- drivers: can: 155 Update SJW setting in CAN driver
|
|
- soc: HPM6750: rename safe stack symbol in link script
|
|
- components: debug_console: wait uart tx flag on writing.
|
|
|
|
### Added:
|
|
- drivers: enet: add 1588 support
|
|
- drivers: can: Add TDC support
|
|
- drivers: mchtmr: add counter init API.
|
|
- drivers: dma: add dma_disable_channel() API
|
|
- middleware: add wav decoder
|
|
- samples: lwip: add ptp demos
|
|
- samples: tinyusb: add msc, cdc demo
|
|
- samples: audio_codec: add wav player demo
|
|
- samples: add tinyuf2 initial support
|
|
- samples: add initial uart dma rx idle demo
|
|
|
|
### Fixed:
|
|
- soc: HPM6750: sysctl: fix cpu lp mode API.
|
|
- drivers: uart: correct baudrate calculation.
|
|
- drivers: usb: fix: no response in device mode when a USB cable is pluged out
|
|
- boards: correct the pin setting related to USB
|
|
|
|
## [0.9.0] - 2022-04-01:
|
|
Main changes since 0.8.0
|
|
|
|
### Changed:
|
|
- drivers: update WDG, UART, DMA, DMAMUX driver
|
|
- drivers: enet remove enet_intf_selection
|
|
- drivers: can: support configure bit timing via low-level bit timing parameters
|
|
- drivers: optimize gpio driver
|
|
- samples: exclude flash targets for mbx core1
|
|
- samples: adjust SES project setting for coremark
|
|
- samples: jpeg: update and integration jpeg decode samples
|
|
- ses: use relpath for linker script in project file
|
|
- ses: add HPM device name in generated project file
|
|
- soc: HPM6750: add an interface selection api
|
|
|
|
### Added:
|
|
- soc: HPM6750: add ram linker for core1
|
|
- ses: support to use Andes toolchain
|
|
- middleware: add hpm_math (replacing hpm_dsp)
|
|
- samples: add lwip httpd
|
|
- drivers: add section and alignment general instructions in hpm_common.h
|
|
|
|
### Fixed:
|
|
- boards: hpm6750evk: fix bldc adc pinmux error
|
|
- boards : hpm6750evk : pinmux : fix spi init pins error
|
|
- samples: sdp: fix non-cacheable data initialization issue
|
|
- samples: littlevgl: fix wrong picture patch in README
|
|
|
|
## [0.8.0] - 2022-03-04:
|
|
All changes since 0.7.3
|
|
|
|
### Changed:
|
|
- rename middleware/sdmmc to middleware/hpm_sdmmc
|
|
- place isr into .isr_vector section for irq non-vector mode
|
|
- change csr functions to support llvm
|
|
|
|
### Fixed:
|
|
- ses: fix issue in register xml
|
|
- freertor: fix trap handler at non-vector mode
|
|
- sdxc: fix software reset issue
|
|
|
|
### Added:
|
|
- add sdk doc
|
|
- add more sample doc
|
|
- add multicore demo
|
|
- i2c/uart: add dma support
|
|
- add tensorflow lite for microcontroller
|
|
|
|
## [0.7.3] - 2022-02-23:
|
|
All changes since 0.7.2
|
|
|
|
### Changed:
|
|
- freertos: change exception handling
|
|
|
|
## [0.7.2] - 2022-02-21:
|
|
All changes since 0.7.1
|
|
|
|
### Changed:
|
|
- freertos: change freertos irq stack definition, passed in CMakeLists.txt, defined in linker
|
|
- soc: hpm6750: add DISABLE_IRQ_PREEMPTIVE to check if it needs to enable irq preemption
|
|
|
|
### Fixed:
|
|
- freertos: disable irq preemption
|
|
|
|
## [0.7.1] - 2022-02-13:
|
|
|
|
All changes since 0.7.0
|
|
|
|
### Changed:
|
|
- drivers: adc12: update adc12_prd_config_t
|
|
- samples: can: update case with interrupt and communication between two boards
|
|
|
|
### Fixed:
|
|
- drivers: can: fix blocking transcation issue
|
|
- samples: mbx: support run this example in SES
|
|
- SES: startup: add fpu enable if abi is set to enable hw fp
|
|
|
|
### Added:
|
|
- samples: multicore: add flash based multicore example
|
|
- drivers: can: add apis to recvieve message for non-blocking use
|
|
|
|
## [0.7.0] - 2022-01-30:
|
|
|
|
All changes since 0.6.2
|
|
|
|
### Changed:
|
|
- update default CPU frequency to 816MHz from 648MHz
|
|
- update the ip headers
|
|
- drivers: gpio: replace gpio_XXX_pins with gpio_XXX_port
|
|
- drivers: gpio: remove pin level enum definition
|
|
- drivers: i2s: driver update to remove mclk_div
|
|
- drivers: ptpc: update driver
|
|
- drivers: common: update get first set bit API
|
|
- drivers: uart: split one enable with parameter into enable and disable interfaces
|
|
- drivers: pwm: change name of output_channel config API
|
|
- drivers: trgm: split separate API to enable/disable io output
|
|
- soc: HPM6750: initialize noncacheable data in startup
|
|
- soc: HPM6750: l1c: update fence.i call
|
|
- samples: hello_world: add LED flashing
|
|
- samples: littlevgl: remove lvgl example
|
|
|
|
### Fixed:
|
|
- hpm6750evkmini: correct refresh cycle number of sdram
|
|
- hpm6750evkmini: Fix the SDRAM memory range issue in flash_sdram_xip linker file
|
|
- SES: remove no_relax option for linker, since segger has provide a patch to its ld for ses v6.10.
|
|
- drivers: gpio: fix read pin issue:
|
|
- drivers: usb: fix usb disconnection under linux environment
|
|
- drivers: sdxc: Fixed the compatibility issue on different SD/eMMC cards in the sdcard_fatfs demo
|
|
- drivers: gptmr: incorrect DMAEN configuration condition
|
|
- drivers: gptmr: clear CNTRST bit after set.
|
|
- SDK_DECLARE_EXT_ISR_M cannot work in the c++ file
|
|
- FreeRTOS: fix ISR_STACK setting
|
|
- components: touch: gt911: fix gpio write pin call
|
|
|
|
### Added:
|
|
- SEG: add register definition file in generated embedded studio project
|
|
- samples: drivers: gpiom: Add example to demonstrate gpiom's function
|
|
- drivers: common: add macro to put data into noncacheable sections
|
|
- middleware: integrate lwip
|