rt-thread/bsp/ti/c28x/tms320f28379d/cmd/2837x_RAM_lnk_cpu1.cmd

82 lines
2.7 KiB
Batchfile

__heap_end = 0x00F000;
MEMORY
{
PAGE 0 :
/* BEGIN is used for the "boot to SARAM" bootloader mode */
BEGIN : origin = 0x000000, length = 0x000002
RAMM0 : origin = 0x000122, length = 0x0002DE
RESET : origin = 0x3FFFC0, length = 0x000002
RAMGS8_15 : origin = 0x013000, length = 0x009000
PAGE 1 :
RAMM1 : origin = 0x000400, length = 0x000400 /* on-chip RAM block M1 */
BOOT_RSVD : origin = 0x000002, length = 0x000120 /* Part of M0, BOOT rom will use this for stack */
EBSS : origin = 0x008000, length = 0x007000 /* RAMLS0-4, 5*0x0800 */
ECONST : origin = 0x00F000, length = 0x004000 /* RAMGS0-2, 3*0x1000 */
CPU2TOCPU1RAM : origin = 0x03F800, length = 0x000400
CPU1TOCPU2RAM : origin = 0x03FC00, length = 0x000400
}
SECTIONS
{
codestart : > BEGIN, PAGE = 0
#ifdef __TI_COMPILER_VERSION__
#if __TI_COMPILER_VERSION__ >= 15009000
.TI.ramfunc : {} > RAMM0, PAGE = 0
#else
ramfuncs : > RAMM0 PAGE = 0
#endif
#endif
.text : > RAMGS8_15, PAGE = 0
.cinit : > RAMM0, PAGE = 0
.init_array : > RAMM0, PAGE = 0
.switch : > RAMM0, PAGE = 0
.reset : > RESET, PAGE = 0, TYPE = DSECT /* not used, */
.rti_fn.0.end : > RAMM1, PAGE = 1
.rti_fn.0 : > RAMM1, PAGE = 1
.rti_fn.1 : > RAMM1, PAGE = 1
.rti_fn.2 : > RAMM1, PAGE = 1
.rti_fn.3 : > RAMM1, PAGE = 1
.rti_fn.4 : > RAMM1, PAGE = 1
.rti_fn.5 : > RAMM1, PAGE = 1
.rti_fn.1.end : > RAMM1, PAGE = 1
.rti_fn.6.end : > RAMM1, PAGE = 1
.rti_fn.6 : > RAMM1, PAGE = 1
.stack : > RAMM1, PAGE = 1
.sysmem : > RAMM1, PAGE = 1
.bss : > EBSS, PAGE = 1
.data : > EBSS,
LOAD_END(__ebss_end),
PAGE = 1
.const : > ECONST, PAGE = 1
/* finsh symbol table */
FSymTab : > RAMM1, PAGE = 1
LOAD_START(__fsymtab_start)
LOAD_END(__fsymtab_end)
/* The following section definitions are required when using the IPC API Drivers */
GROUP : > CPU1TOCPU2RAM, PAGE = 1
{
PUTBUFFER
PUTWRITEIDX
GETREADIDX
}
GROUP : > CPU2TOCPU1RAM, PAGE = 1
{
GETBUFFER : TYPE = DSECT
GETWRITEIDX : TYPE = DSECT
PUTREADIDX : TYPE = DSECT
}
}
/*
//===========================================================================
// End of file.
//===========================================================================
*/