9182d4cbb7 | ||
---|---|---|
.. | ||
applications | ||
board | ||
figures | ||
.config | ||
.gitignore | ||
Kconfig | ||
README.md | ||
README_zh.md | ||
SConscript | ||
SConstruct | ||
project.ewp | ||
project.eww | ||
project.uvoptx | ||
project.uvprojx | ||
rtconfig.h | ||
rtconfig.py | ||
template.ewp | ||
template.eww | ||
template.uvoptx | ||
template.uvprojx |
README.md
STM32L010-Nucleo BSP Introduction
MCU: STM32L010RB @32MHz, 128KB FLASH, 20KB RAM
KEY FEATURES
-
Ultra-low-power platform
- 1.8 V to 3.6 V power supply
- –40 to 85 °C temperature range
- 0.29 µA Standby mode (2 wakeup pins)
- 0.43 µA Stop mode (16 wakeup lines)
- 0.86 µA Stop mode + RTC + 20-Kbyte RAM retention
- Down to 93 µA/MHz in Run mode
- 5 µs wakeup time (from Flash memory)
- 41 µA 12-bit ADC conversion at 10 ksps
-
Core: Arm® 32-bit Cortex®-M0+
- From 32 kHz to 32 MHz
- 0.95 DMIPS/MHz
-
Reset and supply management
- Ultra-low-power BOR (brownout reset) with 5 selectable thresholds
- Ultra-low-power POR/PDR
-
Clock sources
- 0 to 32 MHz external clock
- 32 kHz oscillator for RTC with calibration
- High-speed internal 16 MHz factory-trimmed RC (±1%)
- Internal low-power 37 kHz RC
- Internal multispeed low-power 65 kHz to 4.2 MHz RC
- PLL for CPU clock
-
Pre-programmed bootloader
- USART, I2C, SPI supported
-
Development support
- Serial wire debug supported
-
51 fast I/Os (45 I/Os 5-Volt tolerant)
-
Memories
- 128-Kbyte Flash memory
- 20-Kbyte RAM
- 512 bytes of data EEPROM
- 20-byte backup register
- Sector protection against R/W operation
-
Analog peripherals
- 12-bit ADC 1.14 Msps up to 16 channels (down to 1.8 V)
-
7-channel DMA controller, supporting ADC, SPI, I2C, USART and timers
-
4x peripherals communication interface
-
1x USART (ISO7816), 1x LPUART (low power)
-
1x SPI 16 Mbit/s
-
1x I2C (SMBus/PMBus)
-
8x timers: 1x 16-bit with up to 4 channels, 2x 16-bit with up to 2 channels, 1x 16-bit ultra-low-power timer, 1x SysTick, 1x RTC and 2x watchdogs (independent/window)
-
CRC calculation unit, 96-bit unique ID
-
LFQFP64 package is ECOPACK2 compliant
Read more
Documents | Description |
---|---|
STM32_Nucleo-64_BSP_Introduction | How to run RT-Thread on STM32 Nucleo-64 boards (Must-Read) |
STM32L010RB ST Official Website | STM32L010RB datasheet and other resources |
Maintained By
Translated By
Meco Man @ RT-Thread Community