730 lines
28 KiB
C
730 lines
28 KiB
C
/*
|
|
* The Clear BSD License
|
|
* Copyright (c) 2016, Freescale Semiconductor, Inc.
|
|
* Copyright 2016-2017 NXP
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without modification,
|
|
* are permitted (subject to the limitations in the disclaimer below) provided
|
|
* that the following conditions are met:
|
|
*
|
|
* o Redistributions of source code must retain the above copyright notice, this list
|
|
* of conditions and the following disclaimer.
|
|
*
|
|
* o Redistributions in binary form must reproduce the above copyright notice, this
|
|
* list of conditions and the following disclaimer in the documentation and/or
|
|
* other materials provided with the distribution.
|
|
*
|
|
* o Neither the name of the copyright holder nor the names of its
|
|
* contributors may be used to endorse or promote products derived from this
|
|
* software without specific prior written permission.
|
|
*
|
|
* NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE.
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
|
|
* WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
|
|
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
|
|
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
|
|
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
|
|
* SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef __FSL_ADC_H__
|
|
#define __FSL_ADC_H__
|
|
|
|
#include "fsl_common.h"
|
|
|
|
/*!
|
|
* @addtogroup lpc_adc
|
|
* @{
|
|
*/
|
|
|
|
/*! @file */
|
|
|
|
/*******************************************************************************
|
|
* Definitions
|
|
******************************************************************************/
|
|
|
|
/*! @name Driver version */
|
|
/*@{*/
|
|
/*! @brief ADC driver version 2.2.0. */
|
|
#define FSL_ADC_DRIVER_VERSION (MAKE_VERSION(2, 2, 0))
|
|
/*@}*/
|
|
|
|
/*!
|
|
* @brief Flags
|
|
*/
|
|
enum _adc_status_flags
|
|
{
|
|
kADC_ThresholdCompareFlagOnChn0 = 1U << 0U, /*!< Threshold comparison event on Channel 0. */
|
|
kADC_ThresholdCompareFlagOnChn1 = 1U << 1U, /*!< Threshold comparison event on Channel 1. */
|
|
kADC_ThresholdCompareFlagOnChn2 = 1U << 2U, /*!< Threshold comparison event on Channel 2. */
|
|
kADC_ThresholdCompareFlagOnChn3 = 1U << 3U, /*!< Threshold comparison event on Channel 3. */
|
|
kADC_ThresholdCompareFlagOnChn4 = 1U << 4U, /*!< Threshold comparison event on Channel 4. */
|
|
kADC_ThresholdCompareFlagOnChn5 = 1U << 5U, /*!< Threshold comparison event on Channel 5. */
|
|
kADC_ThresholdCompareFlagOnChn6 = 1U << 6U, /*!< Threshold comparison event on Channel 6. */
|
|
kADC_ThresholdCompareFlagOnChn7 = 1U << 7U, /*!< Threshold comparison event on Channel 7. */
|
|
kADC_ThresholdCompareFlagOnChn8 = 1U << 8U, /*!< Threshold comparison event on Channel 8. */
|
|
kADC_ThresholdCompareFlagOnChn9 = 1U << 9U, /*!< Threshold comparison event on Channel 9. */
|
|
kADC_ThresholdCompareFlagOnChn10 = 1U << 10U, /*!< Threshold comparison event on Channel 10. */
|
|
kADC_ThresholdCompareFlagOnChn11 = 1U << 11U, /*!< Threshold comparison event on Channel 11. */
|
|
kADC_OverrunFlagForChn0 =
|
|
1U << 12U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 0. */
|
|
kADC_OverrunFlagForChn1 =
|
|
1U << 13U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 1. */
|
|
kADC_OverrunFlagForChn2 =
|
|
1U << 14U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 2. */
|
|
kADC_OverrunFlagForChn3 =
|
|
1U << 15U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 3. */
|
|
kADC_OverrunFlagForChn4 =
|
|
1U << 16U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 4. */
|
|
kADC_OverrunFlagForChn5 =
|
|
1U << 17U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 5. */
|
|
kADC_OverrunFlagForChn6 =
|
|
1U << 18U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 6. */
|
|
kADC_OverrunFlagForChn7 =
|
|
1U << 19U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 7. */
|
|
kADC_OverrunFlagForChn8 =
|
|
1U << 20U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 8. */
|
|
kADC_OverrunFlagForChn9 =
|
|
1U << 21U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 9. */
|
|
kADC_OverrunFlagForChn10 =
|
|
1U << 22U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 10. */
|
|
kADC_OverrunFlagForChn11 =
|
|
1U << 23U, /*!< Mirror the OVERRUN status flag from the result register for ADC channel 11. */
|
|
kADC_GlobalOverrunFlagForSeqA = 1U << 24U, /*!< Mirror the glabal OVERRUN status flag for conversion sequence A. */
|
|
kADC_GlobalOverrunFlagForSeqB = 1U << 25U, /*!< Mirror the global OVERRUN status flag for conversion sequence B. */
|
|
kADC_ConvSeqAInterruptFlag = 1U << 28U, /*!< Sequence A interrupt/DMA trigger. */
|
|
kADC_ConvSeqBInterruptFlag = 1U << 29U, /*!< Sequence B interrupt/DMA trigger. */
|
|
kADC_ThresholdCompareInterruptFlag = 1U << 30U, /*!< Threshold comparision interrupt flag. */
|
|
kADC_OverrunInterruptFlag = 1U << 31U, /*!< Overrun interrupt flag. */
|
|
};
|
|
|
|
/*!
|
|
* @brief Interrupts
|
|
* @note Not all the interrupt options are listed here
|
|
*/
|
|
enum _adc_interrupt_enable
|
|
{
|
|
kADC_ConvSeqAInterruptEnable = ADC_INTEN_SEQA_INTEN_MASK, /*!< Enable interrupt upon completion of each individual
|
|
conversion in sequence A, or entire sequence. */
|
|
kADC_ConvSeqBInterruptEnable = ADC_INTEN_SEQB_INTEN_MASK, /*!< Enable interrupt upon completion of each individual
|
|
conversion in sequence B, or entire sequence. */
|
|
kADC_OverrunInterruptEnable = ADC_INTEN_OVR_INTEN_MASK, /*!< Enable the detection of an overrun condition on any of
|
|
the channel data registers will cause an overrun
|
|
interrupt/DMA trigger. */
|
|
};
|
|
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE) & FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE
|
|
/*!
|
|
* @brief Define selection of clock mode.
|
|
*/
|
|
typedef enum _adc_clock_mode
|
|
{
|
|
kADC_ClockSynchronousMode =
|
|
0U, /*!< The ADC clock would be derived from the system clock based on "clockDividerNumber". */
|
|
kADC_ClockAsynchronousMode = 1U, /*!< The ADC clock would be based on the SYSCON block's divider. */
|
|
} adc_clock_mode_t;
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE. */
|
|
|
|
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_RESOL) & FSL_FEATURE_ADC_HAS_CTRL_RESOL
|
|
/*!
|
|
* @brief Define selection of resolution.
|
|
*/
|
|
typedef enum _adc_resolution
|
|
{
|
|
kADC_Resolution6bit = 0U, /*!< 6-bit resolution. */
|
|
kADC_Resolution8bit = 1U, /*!< 8-bit resolution. */
|
|
kADC_Resolution10bit = 2U, /*!< 10-bit resolution. */
|
|
kADC_Resolution12bit = 3U, /*!< 12-bit resolution. */
|
|
} adc_resolution_t;
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_RESOL. */
|
|
|
|
#if defined(FSL_FEATURE_ADC_HAS_TRIM_REG) & FSL_FEATURE_ADC_HAS_TRIM_REG
|
|
/*!
|
|
* @brief Definfe range of the analog supply voltage VDDA.
|
|
*/
|
|
typedef enum _adc_voltage_range
|
|
{
|
|
kADC_HighVoltageRange = 0U, /* High voltage. VDD = 2.7 V to 3.6 V. */
|
|
kADC_LowVoltageRange = 1U, /* Low voltage. VDD = 2.4 V to 2.7 V. */
|
|
} adc_vdda_range_t;
|
|
#endif/* FSL_FEATURE_ADC_HAS_TRIM_REG. */
|
|
|
|
/*!
|
|
* @brief Define selection of polarity of selected input trigger for conversion sequence.
|
|
*/
|
|
typedef enum _adc_trigger_polarity
|
|
{
|
|
kADC_TriggerPolarityNegativeEdge = 0U, /*!< A negative edge launches the conversion sequence on the trigger(s). */
|
|
kADC_TriggerPolarityPositiveEdge = 1U, /*!< A positive edge launches the conversion sequence on the trigger(s). */
|
|
} adc_trigger_polarity_t;
|
|
|
|
/*!
|
|
* @brief Define selection of conversion sequence's priority.
|
|
*/
|
|
typedef enum _adc_priority
|
|
{
|
|
kADC_PriorityLow = 0U, /*!< This sequence would be preempted when another sequence is started. */
|
|
kADC_PriorityHigh = 1U, /*!< This sequence would preempt other sequence even when it is started. */
|
|
} adc_priority_t;
|
|
|
|
/*!
|
|
* @brief Define selection of conversion sequence's interrupt.
|
|
*/
|
|
typedef enum _adc_seq_interrupt_mode
|
|
{
|
|
kADC_InterruptForEachConversion = 0U, /*!< The sequence interrupt/DMA trigger will be set at the end of each
|
|
individual ADC conversion inside this conversion sequence. */
|
|
kADC_InterruptForEachSequence = 1U, /*!< The sequence interrupt/DMA trigger will be set when the entire set of
|
|
this sequence conversions completes. */
|
|
} adc_seq_interrupt_mode_t;
|
|
|
|
/*!
|
|
* @brief Define status of threshold compare result.
|
|
*/
|
|
typedef enum _adc_threshold_compare_status
|
|
{
|
|
kADC_ThresholdCompareInRange = 0U, /*!< LOW threshold <= conversion value <= HIGH threshold. */
|
|
kADC_ThresholdCompareBelowRange = 1U, /*!< conversion value < LOW threshold. */
|
|
kADC_ThresholdCompareAboveRange = 2U, /*!< conversion value > HIGH threshold. */
|
|
} adc_threshold_compare_status_t;
|
|
|
|
/*!
|
|
* @brief Define status of threshold crossing detection result.
|
|
*/
|
|
typedef enum _adc_threshold_crossing_status
|
|
{
|
|
/* The conversion on this channel had the same relationship (above or below) to the threshold value established by
|
|
* the designated LOW threshold value as did the previous conversion on this channel. */
|
|
kADC_ThresholdCrossingNoDetected = 0U, /*!< No threshold Crossing detected. */
|
|
|
|
/* Indicates that a threshold crossing in the downward direction has occurred - i.e. the previous sample on this
|
|
* channel was above the threshold value established by the designated LOW threshold value and the current sample is
|
|
* below that threshold. */
|
|
kADC_ThresholdCrossingDownward = 2U, /*!< Downward Threshold Crossing detected. */
|
|
|
|
/* Indicates that a thre shold crossing in the upward direction has occurred - i.e. the previous sample on this
|
|
* channel was below the threshold value established by the designated LOW threshold value and the current sample is
|
|
* above that threshold. */
|
|
kADC_ThresholdCrossingUpward = 3U, /*!< Upward Threshold Crossing Detected. */
|
|
} adc_threshold_crossing_status_t;
|
|
|
|
/*!
|
|
* @brief Define interrupt mode for threshold compare event.
|
|
*/
|
|
typedef enum _adc_threshold_interrupt_mode
|
|
{
|
|
kADC_ThresholdInterruptDisabled = 0U, /*!< Threshold comparison interrupt is disabled. */
|
|
kADC_ThresholdInterruptOnOutside = 1U, /*!< Threshold comparison interrupt is enabled on outside threshold. */
|
|
kADC_ThresholdInterruptOnCrossing = 2U, /*!< Threshold comparison interrupt is enabled on crossing threshold. */
|
|
} adc_threshold_interrupt_mode_t;
|
|
|
|
/*!
|
|
* @brief Define structure for configuring the block.
|
|
*/
|
|
typedef struct _adc_config
|
|
{
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE) & FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE
|
|
adc_clock_mode_t clockMode; /*!< Select the clock mode for ADC converter. */
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_ASYNMODE. */
|
|
uint32_t clockDividerNumber; /*!< This field is only available when using kADC_ClockSynchronousMode for "clockMode"
|
|
field. The divider would be plused by 1 based on the value in this field. The
|
|
available range is in 8 bits. */
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_RESOL) & FSL_FEATURE_ADC_HAS_CTRL_RESOL
|
|
adc_resolution_t resolution; /*!< Select the conversion bits. */
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_RESOL. */
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_BYPASSCAL) & FSL_FEATURE_ADC_HAS_CTRL_BYPASSCAL
|
|
bool enableBypassCalibration; /*!< By default, a calibration cycle must be performed each time the chip is
|
|
powered-up. Re-calibration may be warranted periodically - especially if
|
|
operating conditions have changed. To enable this option would avoid the need to
|
|
calibrate if offset error is not a concern in the application. */
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_BYPASSCAL. */
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_TSAMP) & FSL_FEATURE_ADC_HAS_CTRL_TSAMP
|
|
uint32_t sampleTimeNumber; /*!< By default, with value as "0U", the sample period would be 2.5 ADC clocks. Then,
|
|
to plus the "sampleTimeNumber" value here. The available value range is in 3 bits.*/
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_TSAMP. */
|
|
#if defined(FSL_FEATURE_ADC_HAS_CTRL_LPWRMODE) & FSL_FEATURE_ADC_HAS_CTRL_LPWRMODE
|
|
bool enableLowPowerMode; /*!< If disable low-power mode, ADC remains activated even when no conversions are requested.
|
|
If enable low-power mode, The ADC is automatically powered-down when no conversions are
|
|
taking place. */
|
|
#endif/* FSL_FEATURE_ADC_HAS_CTRL_LPWRMODE. */
|
|
#if defined(FSL_FEATURE_ADC_HAS_TRIM_REG) & FSL_FEATURE_ADC_HAS_TRIM_REG
|
|
adc_vdda_range_t voltageRange; /*!< Configure the ADC for the appropriate operating range of the analog supply voltage VDDA.
|
|
Failure to set the area correctly causes the ADC to return incorrect conversion results. */
|
|
#endif/* FSL_FEATURE_ADC_HAS_TRIM_REG. */
|
|
} adc_config_t;
|
|
|
|
/*!
|
|
* @brief Define structure for configuring conversion sequence.
|
|
*/
|
|
typedef struct _adc_conv_seq_config
|
|
{
|
|
uint32_t channelMask; /*!< Selects which one or more of the ADC channels will be sampled and converted when this
|
|
sequence is launched. The masked channels would be involved in current conversion
|
|
sequence, beginning with the lowest-order. The available range is in 12-bit. */
|
|
uint32_t triggerMask; /*!< Selects which one or more of the available hardware trigger sources will cause this
|
|
conversion sequence to be initiated. The available range is 6-bit.*/
|
|
adc_trigger_polarity_t triggerPolarity; /*!< Select the trigger to lauch conversion sequence. */
|
|
bool enableSyncBypass; /*!< To enable this feature allows the hardware trigger input to bypass synchronization
|
|
flip-flop stages and therefore shorten the time between the trigger input signal and the
|
|
start of a conversion. */
|
|
bool enableSingleStep; /*!< When enabling this feature, a trigger will launch a single conversion on the next
|
|
channel in the sequence instead of the default response of launching an entire sequence
|
|
of conversions. */
|
|
adc_seq_interrupt_mode_t interruptMode; /*!< Select the interrpt/DMA trigger mode. */
|
|
} adc_conv_seq_config_t;
|
|
|
|
/*!
|
|
* @brief Define structure of keeping conversion result information.
|
|
*/
|
|
typedef struct _adc_result_info
|
|
{
|
|
uint32_t result; /*!< Keep the conversion data value. */
|
|
adc_threshold_compare_status_t thresholdCompareStatus; /*!< Keep the threshold compare status. */
|
|
adc_threshold_crossing_status_t thresholdCorssingStatus; /*!< Keep the threshold crossing status. */
|
|
uint32_t channelNumber; /*!< Keep the channel number for this conversion. */
|
|
bool overrunFlag; /*!< Keep the status whether the conversion is overrun or not. */
|
|
/* The data available flag would be returned by the reading result API. */
|
|
} adc_result_info_t;
|
|
|
|
#if defined(__cplusplus)
|
|
extern "C" {
|
|
#endif
|
|
|
|
/*******************************************************************************
|
|
* API
|
|
******************************************************************************/
|
|
|
|
/*!
|
|
* @name Initialization and Deinitialization
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Initialize the ADC module.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param config Pointer to configuration structure, see to #adc_config_t.
|
|
*/
|
|
void ADC_Init(ADC_Type *base, const adc_config_t *config);
|
|
|
|
/*!
|
|
* @brief Deinitialize the ADC module.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
*/
|
|
void ADC_Deinit(ADC_Type *base);
|
|
|
|
/*!
|
|
* @brief Gets an available pre-defined settings for initial configuration.
|
|
*
|
|
* This function initializes the initial configuration structure with an available settings. The default values are:
|
|
* @code
|
|
* config->clockMode = kADC_ClockSynchronousMode;
|
|
* config->clockDividerNumber = 0U;
|
|
* config->resolution = kADC_Resolution12bit;
|
|
* config->enableBypassCalibration = false;
|
|
* config->sampleTimeNumber = 0U;
|
|
* @endcode
|
|
* @param config Pointer to configuration structure.
|
|
*/
|
|
void ADC_GetDefaultConfig(adc_config_t *config);
|
|
|
|
#if !(defined(FSL_FEATURE_ADC_HAS_NO_CALIB_FUNC) && FSL_FEATURE_ADC_HAS_NO_CALIB_FUNC)
|
|
#if defined(FSL_FEATURE_ADC_HAS_CALIB_REG) && FSL_FEATURE_ADC_HAS_CALIB_REG
|
|
/*!
|
|
* @brief Do the self hardware calibration.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @retval true Calibration succeed.
|
|
* @retval false Calibration failed.
|
|
*/
|
|
bool ADC_DoSelfCalibration(ADC_Type *base);
|
|
#else
|
|
/*!
|
|
* @brief Do the self calibration. To calibrate the ADC, set the ADC clock to 500 kHz.
|
|
* In order to achieve the specified ADC accuracy, the A/D converter must be recalibrated, at a minimum,
|
|
* following every chip reset before initiating normal ADC operation.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param frequency The ststem clock frequency to ADC.
|
|
* @retval true Calibration succeed.
|
|
* @retval false Calibration failed.
|
|
*/
|
|
bool ADC_DoSelfCalibration(ADC_Type *base, uint32_t frequency);
|
|
#endif/* FSL_FEATURE_ADC_HAS_CALIB_REG */
|
|
#endif/* FSL_FEATURE_ADC_HAS_NO_CALIB_FUNC */
|
|
|
|
#if !(defined(FSL_FEATURE_ADC_HAS_NO_INSEL) && FSL_FEATURE_ADC_HAS_NO_INSEL)
|
|
/*!
|
|
* @brief Enable the internal temperature sensor measurement.
|
|
*
|
|
* When enabling the internal temperature sensor measurement, the channel 0 would be connected to internal sensor
|
|
* instead of external pin.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param enable Switcher to enable the feature or not.
|
|
*/
|
|
static inline void ADC_EnableTemperatureSensor(ADC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->INSEL = (base->INSEL & ~ADC_INSEL_SEL_MASK) | ADC_INSEL_SEL(0x3);
|
|
}
|
|
else
|
|
{
|
|
base->INSEL = (base->INSEL & ~ADC_INSEL_SEL_MASK) | ADC_INSEL_SEL(0);
|
|
}
|
|
}
|
|
#endif /* FSL_FEATURE_ADC_HAS_NO_INSEL. */
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Control conversion sequence A.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enable the conversion sequence A.
|
|
*
|
|
* In order to avoid spuriously triggering the sequence, the trigger to conversion sequence should be ready before the
|
|
* sequence is ready. when the sequence is disabled, the trigger would be ignored. Also, it is suggested to disable the
|
|
* sequence during changing the sequence's setting.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param enable Switcher to enable the feature or not.
|
|
*/
|
|
static inline void ADC_EnableConvSeqA(ADC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->SEQ_CTRL[0] |= ADC_SEQ_CTRL_SEQ_ENA_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->SEQ_CTRL[0] &= ~ADC_SEQ_CTRL_SEQ_ENA_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Configure the conversion sequence A.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param config Pointer to configuration structure, see to #adc_conv_seq_config_t.
|
|
*/
|
|
void ADC_SetConvSeqAConfig(ADC_Type *base, const adc_conv_seq_config_t *config);
|
|
|
|
/*!
|
|
* @brief Do trigger the sequence's conversion by software.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
*/
|
|
static inline void ADC_DoSoftwareTriggerConvSeqA(ADC_Type *base)
|
|
{
|
|
base->SEQ_CTRL[0] |= ADC_SEQ_CTRL_START_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief Enable the burst conversion of sequence A.
|
|
*
|
|
* Enable the burst mode would cause the conversion sequence to be cntinuously cycled through. Other triggers would be
|
|
* ignored while this mode is enabled. Repeated conversions could be halted by disabling this mode. And the sequence
|
|
* currently in process will be completed before cnversions are terminated.
|
|
* Note that a new sequence could begin just before the burst mode is disabled.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param enable Switcher to enable this feature.
|
|
*/
|
|
static inline void ADC_EnableConvSeqABurstMode(ADC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->SEQ_CTRL[0] |= ADC_SEQ_CTRL_BURST_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->SEQ_CTRL[0] &= ~ADC_SEQ_CTRL_BURST_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Set the high priority for conversion sequence A.
|
|
*
|
|
* @param base ADC peripheral bass address.
|
|
*/
|
|
static inline void ADC_SetConvSeqAHighPriority(ADC_Type *base)
|
|
{
|
|
base->SEQ_CTRL[0] |= ADC_SEQ_CTRL_LOWPRIO_MASK;
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Control conversion sequence B.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enable the conversion sequence B.
|
|
*
|
|
* In order to avoid spuriously triggering the sequence, the trigger to conversion sequence should be ready before the
|
|
* sequence is ready. when the sequence is disabled, the trigger would be ignored. Also, it is suggested to disable the
|
|
* sequence during changing the sequence's setting.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param enable Switcher to enable the feature or not.
|
|
*/
|
|
static inline void ADC_EnableConvSeqB(ADC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->SEQ_CTRL[1] |= ADC_SEQ_CTRL_SEQ_ENA_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->SEQ_CTRL[1] &= ~ADC_SEQ_CTRL_SEQ_ENA_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Configure the conversion sequence B.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param config Pointer to configuration structure, see to #adc_conv_seq_config_t.
|
|
*/
|
|
void ADC_SetConvSeqBConfig(ADC_Type *base, const adc_conv_seq_config_t *config);
|
|
|
|
/*!
|
|
* @brief Do trigger the sequence's conversion by software.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
*/
|
|
static inline void ADC_DoSoftwareTriggerConvSeqB(ADC_Type *base)
|
|
{
|
|
base->SEQ_CTRL[1] |= ADC_SEQ_CTRL_START_MASK;
|
|
}
|
|
|
|
/*!
|
|
* @brief Enable the burst conversion of sequence B.
|
|
*
|
|
* Enable the burst mode would cause the conversion sequence to be continuously cycled through. Other triggers would be
|
|
* ignored while this mode is enabled. Repeated conversions could be halted by disabling this mode. And the sequence
|
|
* currently in process will be completed before cnversions are terminated.
|
|
* Note that a new sequence could begin just before the burst mode is disabled.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param enable Switcher to enable this feature.
|
|
*/
|
|
static inline void ADC_EnableConvSeqBBurstMode(ADC_Type *base, bool enable)
|
|
{
|
|
if (enable)
|
|
{
|
|
base->SEQ_CTRL[1] |= ADC_SEQ_CTRL_BURST_MASK;
|
|
}
|
|
else
|
|
{
|
|
base->SEQ_CTRL[1] &= ~ADC_SEQ_CTRL_BURST_MASK;
|
|
}
|
|
}
|
|
|
|
/*!
|
|
* @brief Set the high priority for conversion sequence B.
|
|
*
|
|
* @param base ADC peripheral bass address.
|
|
*/
|
|
static inline void ADC_SetConvSeqBHighPriority(ADC_Type *base)
|
|
{
|
|
base->SEQ_CTRL[0] &= ~ADC_SEQ_CTRL_LOWPRIO_MASK;
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Data result.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Get the global ADC conversion infomation of sequence A.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param info Pointer to information structure, see to #adc_result_info_t;
|
|
* @retval true The conversion result is ready.
|
|
* @retval false The conversion result is not ready yet.
|
|
*/
|
|
bool ADC_GetConvSeqAGlobalConversionResult(ADC_Type *base, adc_result_info_t *info);
|
|
|
|
/*!
|
|
* @brief Get the global ADC conversion infomation of sequence B.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param info Pointer to information structure, see to #adc_result_info_t;
|
|
* @retval true The conversion result is ready.
|
|
* @retval false The conversion result is not ready yet.
|
|
*/
|
|
bool ADC_GetConvSeqBGlobalConversionResult(ADC_Type *base, adc_result_info_t *info);
|
|
|
|
/*!
|
|
* @brief Get the channel's ADC conversion completed under each conversion sequence.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param channel The indicated channel number.
|
|
* @param info Pointer to information structure, see to #adc_result_info_t;
|
|
* @retval true The conversion result is ready.
|
|
* @retval false The conversion result is not ready yet.
|
|
*/
|
|
bool ADC_GetChannelConversionResult(ADC_Type *base, uint32_t channel, adc_result_info_t *info);
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Threshold function.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Set the threshhold pair 0 with low and high value.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param lowValue LOW threshold value.
|
|
* @param highValue HIGH threshold value.
|
|
*/
|
|
static inline void ADC_SetThresholdPair0(ADC_Type *base, uint32_t lowValue, uint32_t highValue)
|
|
{
|
|
base->THR0_LOW = ADC_THR0_LOW_THRLOW(lowValue);
|
|
base->THR0_HIGH = ADC_THR0_HIGH_THRHIGH(highValue);
|
|
}
|
|
|
|
/*!
|
|
* @brief Set the threshhold pair 1 with low and high value.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param lowValue LOW threshold value. The available value is with 12-bit.
|
|
* @param highValue HIGH threshold value. The available value is with 12-bit.
|
|
*/
|
|
static inline void ADC_SetThresholdPair1(ADC_Type *base, uint32_t lowValue, uint32_t highValue)
|
|
{
|
|
base->THR1_LOW = ADC_THR1_LOW_THRLOW(lowValue);
|
|
base->THR1_HIGH = ADC_THR1_HIGH_THRHIGH(highValue);
|
|
}
|
|
|
|
/*!
|
|
* @brief Set given channels to apply the threshold pare 0.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param channelMask Indicated channels' mask.
|
|
*/
|
|
static inline void ADC_SetChannelWithThresholdPair0(ADC_Type *base, uint32_t channelMask)
|
|
{
|
|
base->CHAN_THRSEL &= ~(channelMask);
|
|
}
|
|
|
|
/*!
|
|
* @brief Set given channels to apply the threshold pare 1.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param channelMask Indicated channels' mask.
|
|
*/
|
|
static inline void ADC_SetChannelWithThresholdPair1(ADC_Type *base, uint32_t channelMask)
|
|
{
|
|
base->CHAN_THRSEL |= channelMask;
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Interrupts.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Enable interrupts for conversion sequences.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param mask Mask of interrupt mask value for global block except each channal, see to #_adc_interrupt_enable.
|
|
*/
|
|
static inline void ADC_EnableInterrupts(ADC_Type *base, uint32_t mask)
|
|
{
|
|
base->INTEN |= (0x7 & mask);
|
|
}
|
|
|
|
/*!
|
|
* @brief Disable interrupts for conversion sequence.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param mask Mask of interrupt mask value for global block except each channel, see to #_adc_interrupt_enable.
|
|
*/
|
|
static inline void ADC_DisableInterrupts(ADC_Type *base, uint32_t mask)
|
|
{
|
|
base->INTEN &= ~(0x7 & mask);
|
|
}
|
|
|
|
/*!
|
|
* @brief Enable the interrupt of threshold compare event for each channel.
|
|
* @deprecated Do not use this function. It has been superceded by @ADC_EnableThresholdCompareInterrupt
|
|
*/
|
|
static inline void ADC_EnableShresholdCompareInterrupt(ADC_Type *base,
|
|
uint32_t channel,
|
|
adc_threshold_interrupt_mode_t mode)
|
|
{
|
|
base->INTEN = (base->INTEN & ~(0x3U << ((channel << 1U) + 3U))) | ((uint32_t)(mode) << ((channel << 1U) + 3U));
|
|
}
|
|
|
|
/*!
|
|
* @brief Enable the interrupt of threshold compare event for each channel.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param channel Channel number.
|
|
* @param mode Interrupt mode for threshold compare event, see to #adc_threshold_interrupt_mode_t.
|
|
*/
|
|
static inline void ADC_EnableThresholdCompareInterrupt(ADC_Type *base,
|
|
uint32_t channel,
|
|
adc_threshold_interrupt_mode_t mode)
|
|
{
|
|
base->INTEN = (base->INTEN & ~(0x3U << ((channel << 1U) + 3U))) | ((uint32_t)(mode) << ((channel << 1U) + 3U));
|
|
}
|
|
|
|
/* @} */
|
|
|
|
/*!
|
|
* @name Status.
|
|
* @{
|
|
*/
|
|
|
|
/*!
|
|
* @brief Get status flags of ADC module.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @return Mask of status flags of module, see to #_adc_status_flags.
|
|
*/
|
|
static inline uint32_t ADC_GetStatusFlags(ADC_Type *base)
|
|
{
|
|
return base->FLAGS;
|
|
}
|
|
|
|
/*!
|
|
* @brief Clear status flags of ADC module.
|
|
*
|
|
* @param base ADC peripheral base address.
|
|
* @param mask Mask of status flags of module, see to #_adc_status_flags.
|
|
*/
|
|
static inline void ADC_ClearStatusFlags(ADC_Type *base, uint32_t mask)
|
|
{
|
|
base->FLAGS = mask; /* Write 1 to clear. */
|
|
}
|
|
|
|
/* @} */
|
|
|
|
#if defined(__cplusplus)
|
|
}
|
|
#endif
|
|
|
|
/* @} */
|
|
|
|
#endif /* __FSL_ADC_H__ */
|