rt-thread/bsp/stm32f429-apollo/drivers/drv_rtc.c

319 lines
9.1 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* File : drv_rtc.c
* This file is part of RT-Thread RTOS
* COPYRIGHT (C) 2009-2013 RT-Thread Develop Team
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rt-thread.org/license/LICENSE
*
* Change Logs:
* Date Author Notes
* 2017-04-05 lizhen9880 the first version for STM32F429
*/
/* Includes ------------------------------------------------------------------*/
#include "board.h"
#include "drv_rtc.h"
#include <rtdevice.h>
#if defined(RT_USING_RTC)
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
#ifdef RT_RTC_DEBUG
#define rtc_debug(format,args...) rt_kprintf(format, ##args)
#else
#define rtc_debug(format,args...)
#endif
/* Private variables ---------------------------------------------------------*/
static struct rt_device rtc;
RTC_HandleTypeDef RTC_Handler; //RTC句柄
//RTC初始化
//返回值:0,初始化成功;
// 2,进入初始化模式失败;
rt_uint8_t RTC_Init(void)
{
RTC_Handler.Instance=RTC;
RTC_Handler.Init.HourFormat=RTC_HOURFORMAT_24;//RTC设置为24小时格式
RTC_Handler.Init.AsynchPrediv=0X7F; //RTC异步分频系数(1~0X7F)
RTC_Handler.Init.SynchPrediv=0XFF; //RTC同步分频系数(0~7FFF)
RTC_Handler.Init.OutPut=RTC_OUTPUT_DISABLE;
RTC_Handler.Init.OutPutPolarity=RTC_OUTPUT_POLARITY_HIGH;
RTC_Handler.Init.OutPutType=RTC_OUTPUT_TYPE_OPENDRAIN;
if(HAL_RTC_Init(&RTC_Handler)!=HAL_OK) return 2;
if(HAL_RTCEx_BKUPRead(&RTC_Handler,RTC_BKP_DR0)!=0X5050)//是否第一次配置
{
// RTC_Set_Time(23,59,56,RTC_HOURFORMAT12_PM); //设置时间 ,根据实际时间修改
// RTC_Set_Date(15,12,27,7); //设置日期
HAL_RTCEx_BKUPWrite(&RTC_Handler,RTC_BKP_DR0,0X5050);//标记已经初始化过了
}
return 0;
}
//RTC底层驱动时钟配置
//此函数会被HAL_RTC_Init()调用
//hrtc:RTC句柄
void HAL_RTC_MspInit(RTC_HandleTypeDef* hrtc)
{
RCC_OscInitTypeDef RCC_OscInitStruct;
RCC_PeriphCLKInitTypeDef PeriphClkInitStruct;
__HAL_RCC_PWR_CLK_ENABLE();//使能电源时钟PWR
HAL_PWR_EnableBkUpAccess();//取消备份区域写保护
RCC_OscInitStruct.OscillatorType=RCC_OSCILLATORTYPE_LSE;//LSE配置
RCC_OscInitStruct.PLL.PLLState=RCC_PLL_NONE;
RCC_OscInitStruct.LSEState=RCC_LSE_ON; //RTC使用LSE
HAL_RCC_OscConfig(&RCC_OscInitStruct);
PeriphClkInitStruct.PeriphClockSelection=RCC_PERIPHCLK_RTC;//外设为RTC
PeriphClkInitStruct.RTCClockSelection=RCC_RTCCLKSOURCE_LSE;//RTC时钟源为LSE
HAL_RCCEx_PeriphCLKConfig(&PeriphClkInitStruct);
__HAL_RCC_RTC_ENABLE();//RTC时钟使能
}
//设置闹钟时间(按星期闹铃,24小时制)
//week:星期几(1~7) @ref RTC_WeekDay_Definitions
//hour,min,sec:小时,分钟,秒钟
void RTC_Set_AlarmA(rt_uint8_t week,rt_uint8_t hour,rt_uint8_t min,rt_uint8_t sec)
{
RTC_AlarmTypeDef RTC_AlarmSturuct;
RTC_AlarmSturuct.AlarmTime.Hours=hour; //小时
RTC_AlarmSturuct.AlarmTime.Minutes=min; //分钟
RTC_AlarmSturuct.AlarmTime.Seconds=sec; //秒
RTC_AlarmSturuct.AlarmTime.SubSeconds=0;
RTC_AlarmSturuct.AlarmTime.TimeFormat=RTC_HOURFORMAT12_AM;
RTC_AlarmSturuct.AlarmMask=RTC_ALARMMASK_NONE;//精确匹配星期,时分秒
RTC_AlarmSturuct.AlarmSubSecondMask=RTC_ALARMSUBSECONDMASK_NONE;
RTC_AlarmSturuct.AlarmDateWeekDaySel=RTC_ALARMDATEWEEKDAYSEL_WEEKDAY;//按星期
RTC_AlarmSturuct.AlarmDateWeekDay=week; //星期
RTC_AlarmSturuct.Alarm=RTC_ALARM_A; //闹钟A
HAL_RTC_SetAlarm_IT(&RTC_Handler,&RTC_AlarmSturuct,RTC_FORMAT_BIN);
HAL_NVIC_SetPriority(RTC_Alarm_IRQn,0x01,0x02); //抢占优先级1,子优先级2
HAL_NVIC_EnableIRQ(RTC_Alarm_IRQn);
}
//周期性唤醒定时器设置
/*wksel: @ref RTCEx_Wakeup_Timer_Definitions
#define RTC_WAKEUPCLOCK_RTCCLK_DIV16 ((uint32_t)0x00000000)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV8 ((uint32_t)0x00000001)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV4 ((uint32_t)0x00000002)
#define RTC_WAKEUPCLOCK_RTCCLK_DIV2 ((uint32_t)0x00000003)
#define RTC_WAKEUPCLOCK_CK_SPRE_16BITS ((uint32_t)0x00000004)
#define RTC_WAKEUPCLOCK_CK_SPRE_17BITS ((uint32_t)0x00000006)
*/
//cnt:自动重装载值.减到0,产生中断.
void RTC_Set_WakeUp(rt_uint32_t wksel,rt_uint16_t cnt)
{
__HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(&RTC_Handler, RTC_FLAG_WUTF);//清除RTC WAKE UP的标志
HAL_RTCEx_SetWakeUpTimer_IT(&RTC_Handler,cnt,wksel); //设置重装载值和时钟
HAL_NVIC_SetPriority(RTC_WKUP_IRQn,0x02,0x02); //抢占优先级1,子优先级2
HAL_NVIC_EnableIRQ(RTC_WKUP_IRQn);
}
//RTC闹钟中断服务函数
void RTC_Alarm_IRQHandler(void)
{
HAL_RTC_AlarmIRQHandler(&RTC_Handler);
}
//RTC闹钟A中断处理回调函数
void HAL_RTC_AlarmAEventCallback(RTC_HandleTypeDef *hrtc)
{
rt_kprintf("ALARM A!\r\n");
}
//RTC WAKE UP中断服务函数
void RTC_WKUP_IRQHandler(void)
{
HAL_RTCEx_WakeUpTimerIRQHandler(&RTC_Handler);
}
time_t GetRTCTimeStamp(void)
{
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
struct tm tm_new;
HAL_RTC_GetTime(&RTC_Handler,&RTC_TimeStruct,RTC_FORMAT_BIN);
HAL_RTC_GetDate(&RTC_Handler,&RTC_DateStruct,RTC_FORMAT_BIN);
tm_new.tm_sec = RTC_TimeStruct.Seconds;
tm_new.tm_min = RTC_TimeStruct.Minutes;
tm_new.tm_hour = RTC_TimeStruct.Hours;
tm_new.tm_mday = RTC_DateStruct.Date;
tm_new.tm_mon = RTC_DateStruct.Month-1;
tm_new.tm_year = RTC_DateStruct.Year+100;
return mktime(&tm_new);
}
rt_err_t SetRTCTimeStamp(time_t time_stamp)
{
RTC_TimeTypeDef RTC_TimeStruct;
RTC_DateTypeDef RTC_DateStruct;
struct tm *p_tm;
p_tm = localtime(&time_stamp);
if(p_tm->tm_year<100)
{
return RT_ERROR;
}
RTC_TimeStruct.Seconds = p_tm->tm_sec ;
RTC_TimeStruct.Minutes = p_tm->tm_min ;
RTC_TimeStruct.Hours = p_tm->tm_hour;
RTC_DateStruct.Date = p_tm->tm_mday;
RTC_DateStruct.Month = p_tm->tm_mon+1 ;
RTC_DateStruct.Year = p_tm->tm_year-100;
RTC_DateStruct.WeekDay = p_tm->tm_wday+1;
HAL_RTC_SetTime(&RTC_Handler,&RTC_TimeStruct,RTC_FORMAT_BIN);
HAL_RTC_SetDate(&RTC_Handler,&RTC_DateStruct,RTC_FORMAT_BIN);
return RT_EOK;
}
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
static rt_err_t rt_rtc_open(rt_device_t dev, rt_uint16_t oflag)
{
if (dev->rx_indicate != RT_NULL)
{
/* Open Interrupt */
}
return RT_EOK;
}
static rt_size_t rt_rtc_read(
rt_device_t dev,
rt_off_t pos,
void* buffer,
rt_size_t size)
{
return 0;
}
/***************************************************************************//**
* @brief
* Configure RTC device
*
* @details
*
* @note
*
* @param[in] dev
* Pointer to device descriptor
*
* @param[in] cmd
* RTC control command
*
* @param[in] args
* Arguments
*
* @return
* Error code
******************************************************************************/
static rt_err_t rt_rtc_control(rt_device_t dev, rt_uint8_t cmd, void *args)
{
rt_err_t result;
RT_ASSERT(dev != RT_NULL);
switch (cmd)
{
case RT_DEVICE_CTRL_RTC_GET_TIME:
*(rt_uint32_t *)args = GetRTCTimeStamp();
rtc_debug("RTC: get rtc_time %x\n", *(rt_uint32_t *)args());
break;
case RT_DEVICE_CTRL_RTC_SET_TIME:
{
result = SetRTCTimeStamp(*(rt_uint32_t *)args);
rtc_debug("RTC: set rtc_time %x\n", *(rt_uint32_t *)args);
/* Reset counter */
}
break;
}
return result;
}
/***************************************************************************//**
* @brief
* Register RTC device
*
* @details
*
* @note
*
* @param[in] device
* Pointer to device descriptor
*
* @param[in] name
* Device name
*
* @param[in] flag
* Configuration flags
*
* @return
* Error code
******************************************************************************/
rt_err_t rt_hw_rtc_register(
rt_device_t device,
const char *name,
rt_uint32_t flag)
{
RT_ASSERT(device != RT_NULL);
device->type = RT_Device_Class_RTC;
device->rx_indicate = RT_NULL;
device->tx_complete = RT_NULL;
device->init = RT_NULL;
device->open = rt_rtc_open;
device->close = RT_NULL;
device->read = rt_rtc_read;
device->write = RT_NULL;
device->control = rt_rtc_control;
device->user_data = RT_NULL; /* no private */
/* register a character device */
return rt_device_register(device, name, RT_DEVICE_FLAG_RDWR | flag);
}
/***************************************************************************//**
* @brief
* Initialize all RTC module related hardware and register RTC device to kernel
*
* @details
*
* @note
******************************************************************************/
int rt_hw_rtc_init(void)
{
RTC_Init();
/* register rtc device */
rt_hw_rtc_register(&rtc, RT_RTC_NAME, 0);
return RT_EOK;
}
INIT_BOARD_EXPORT(rt_hw_rtc_init);
#endif
/***************************************************************************//**
* @}
******************************************************************************/