rt-thread/bsp/x1000/drivers/slcd/drv_slcd_otm4802.c

248 lines
6.8 KiB
C

/*
* File : drv_slcdc_OTM4802.c
* COPYRIGHT (C) 2008 - 2016, RT-Thread Development Team
*
* Change Logs:
* Date Author Notes
* 2017Äê5ÔÂ6ÈÕ Urey the first version
*/
#include <rtthread.h>
#include <cache.h>
#include "board.h"
#include "drv_slcdc.h"
#include <drv_gpio.h>
#ifdef RT_USING_OTM4802
#define LCD_WIDTH 480
#define LCD_HEIGHT 320
rt_uint32_t _lcm_cmd_table[]=
{
0x2C2C2C2C,
};
const struct slcd_data_table _lcm_data_table[] =
{
/* LCD init code */
{SMART_CONFIG_CMD, 0xff}, //Command 2 Enable
{SMART_CONFIG_DATA, 0x48},
{SMART_CONFIG_DATA, 0x02},
{SMART_CONFIG_DATA, 0x01},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x80},
{SMART_CONFIG_CMD, 0xff}, //ORISE Command Enable
{SMART_CONFIG_DATA, 0x48},
{SMART_CONFIG_DATA, 0x02},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x90},
{SMART_CONFIG_CMD, 0xFF}, //MPU 16bit setting
{SMART_CONFIG_DATA, 0x01}, //02-16BIT MCU,01-8BIT MCU
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x93},
{SMART_CONFIG_CMD, 0xFF}, //SW MPU enable
{SMART_CONFIG_DATA, 0x20},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x51}, //Wright Display brightness
{SMART_CONFIG_DATA, 0xf0},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x53}, // Wright CTRL Display
{SMART_CONFIG_DATA, 0x24},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0xb1},
{SMART_CONFIG_CMD, 0xc5}, //VSEL setting
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0xB0},
{SMART_CONFIG_CMD, 0xc4}, //Gate Timing control
{SMART_CONFIG_DATA, 0x02},
{SMART_CONFIG_DATA, 0x08},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x90},
{SMART_CONFIG_CMD, 0xc0}, //TCON MCLK Shift Control
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x0f},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x15},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x17},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x82},
{SMART_CONFIG_CMD, 0xc5}, //Adjust pump phase
{SMART_CONFIG_DATA, 0x01},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x90},
{SMART_CONFIG_CMD, 0xc5}, //Adjust pump phase
{SMART_CONFIG_DATA, 0x47},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0xd8}, //GVDD/NGVDD Setting
{SMART_CONFIG_DATA, 0x58}, //58,17V
{SMART_CONFIG_DATA, 0x58}, //58
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0xd9}, //VCOM Setting
{SMART_CONFIG_DATA, 0xb0}, //
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x91},
{SMART_CONFIG_CMD, 0xb3}, //Display setting
{SMART_CONFIG_DATA, 0xC0},
{SMART_CONFIG_DATA, 0x25},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x81},
{SMART_CONFIG_CMD, 0xC1}, //Osillator Adjustment:70Hz
{SMART_CONFIG_DATA, 0x77},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0xe1}, //Gamma setting(positive)
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x04},
{SMART_CONFIG_DATA, 0x02},
{SMART_CONFIG_DATA, 0x0b},
{SMART_CONFIG_DATA, 0x0a},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x08},
{SMART_CONFIG_DATA, 0x10},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x06},
{SMART_CONFIG_DATA, 0x11},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x01},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0xe2}, //Gamma setting(negative)
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x04},
{SMART_CONFIG_DATA, 0x02},
{SMART_CONFIG_DATA, 0x0b},
{SMART_CONFIG_DATA, 0x0a},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x08},
{SMART_CONFIG_DATA, 0x10},
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_DATA, 0x06},
{SMART_CONFIG_DATA, 0x11},
{SMART_CONFIG_DATA, 0x09},
{SMART_CONFIG_DATA, 0x01},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x00}, //End Gamma setting
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x80},
{SMART_CONFIG_CMD, 0xff}, //Orise mode command Disable
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0xff}, //Command 2 Disable
{SMART_CONFIG_DATA, 0xff},
{SMART_CONFIG_DATA, 0xff},
{SMART_CONFIG_DATA, 0xff},
//{SMART_CONFIG_CMD, 0x35}, //TE ON
//{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_CMD, 0x36}, //set X Y refresh direction
{SMART_CONFIG_DATA, 0x60},
{SMART_CONFIG_CMD, 0x3A}, //16-bit/pixe 565
{SMART_CONFIG_DATA, 0x05},
{SMART_CONFIG_CMD, 0x2A}, //Frame rate control 320
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, (LCD_WIDTH -1 ) >> 8},
{SMART_CONFIG_DATA, (LCD_WIDTH -1 ) & 0xFF},
{SMART_CONFIG_CMD, 0x2B}, //Display function control 480
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, 0x00},
{SMART_CONFIG_DATA, (LCD_WIDTH -1 ) >> 8},
{SMART_CONFIG_DATA, (LCD_HEIGHT -1 ) & 0xFF},
{SMART_CONFIG_CMD, 0x11},
{SMART_CONFIG_UDELAY, 120},
{SMART_CONFIG_CMD, 0x29}, //display on
{SMART_CONFIG_CMD, 0x2c},
};
struct slcd_configure _lcm_config =
{
.rsply_cmd_high = 0,
.csply_active_high = 0,
.newcfg_fmt_conv = 1,
.width = LCD_WIDTH,
.height = LCD_HEIGHT,
.fmt = RTGRAPHIC_PIXEL_FORMAT_RGB565,
.bpp = 16,
.bus_width = 8,
.reg_width = 8,
.refresh = 60,
.data_table = &_lcm_data_table[0],
.data_table_num = sizeof(_lcm_data_table)/sizeof(_lcm_data_table[0]),
.cmd_table = &_lcm_cmd_table[0],
.cmd_table_num = sizeof(_lcm_cmd_table)/sizeof(_lcm_cmd_table[0])
};
int rt_hw_otm4802_init(void)
{
rt_thread_delay(rt_tick_from_millisecond(500));
/* Power ON */
gpio_direction_output(GPIO_PORT_B,GPIO_Pin_16,1); //RD = 1
gpio_direction_output(GPIO_PORT_B,GPIO_Pin_18,1); //CS = 1
gpio_set_value(LCD_RST_PORT, LCD_RST_PIN, 0);
rt_thread_delay(rt_tick_from_millisecond(20));
gpio_set_value(LCD_RST_PORT, LCD_RST_PIN, 1);
rt_thread_delay(rt_tick_from_millisecond(500));
gpio_set_value(GPIO_PORT_B, GPIO_Pin_18, 0); //CS = 0
/* enable backlight */
gpio_direction_output(LCD_BL_PORT, LCD_BL_PIN,1);
/* init lcd & register lcd device */
rt_hw_slcd_init(&_lcm_config);
return 0;
}
#endif