//***************************************************************************** // // emac.h - Defines and Macros for the Ethernet module on MSP432E4. // // Copyright (c) 2012-2017 Texas Instruments Incorporated. All rights reserved. // Software License Agreement // // Redistribution and use in source and binary forms, with or without // modification, are permitted provided that the following conditions // are met: // // Redistributions of source code must retain the above copyright // notice, this list of conditions and the following disclaimer. // // Redistributions in binary form must reproduce the above copyright // notice, this list of conditions and the following disclaimer in the // documentation and/or other materials provided with the // distribution. // // Neither the name of Texas Instruments Incorporated nor the names of // its contributors may be used to endorse or promote products derived // from this software without specific prior written permission. // // THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS // "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT // LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR // A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT // OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, // SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT // LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, // DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY // THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT // (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE // OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. // //***************************************************************************** #ifndef __DRIVERLIB_EMAC_H__ #define __DRIVERLIB_EMAC_H__ #include #include //***************************************************************************** // // If building with a C++ compiler, make all of the definitions in this header // have a C binding. // //***************************************************************************** #ifdef __cplusplus extern "C" { #endif //***************************************************************************** // //! \addtogroup emac_api //! @{ // //***************************************************************************** //***************************************************************************** // // The physical address of the internal PHY. This should be in hw_emac.h. // //***************************************************************************** #define EMAC_PHY_ADDR 0 //***************************************************************************** // // Helper Macros for Ethernet Processing // //***************************************************************************** // // htonl/ntohl - Big endian/little endian byte swapping macros for 32-bit // values. // //***************************************************************************** #ifndef htonl #define htonl(a) \ ((((a) >> 24) & 0x000000ff) | \ (((a) >> 8) & 0x0000ff00) | \ (((a) << 8) & 0x00ff0000) | \ (((a) << 24) & 0xff000000)) #endif #ifndef ntohl #define ntohl(a) htonl((a)) #endif //***************************************************************************** // // htons/ntohs - Big endian/little endian byte swapping macros for 16-bit // values. // //***************************************************************************** #ifndef htons #define htons(a) \ ((((a) >> 8) & 0x00ff) | \ (((a) << 8) & 0xff00)) #endif #ifndef ntohs #define ntohs(a) htons((a)) #endif //***************************************************************************** // // Forward reference to the Ethernet DMA descriptor structure. // //***************************************************************************** typedef struct tEMACDMADescriptor tEMACDMADescriptor; //***************************************************************************** // //! A union used to describe the two overlapping fields forming the third //! word of the Ethernet DMA descriptor. // //***************************************************************************** typedef union { // //! When DMA descriptors are used in chained mode, this field is used to //! provide a link to the next descriptor. // tEMACDMADescriptor *pLink; // //! When the DMA descriptors are unchained, this field may be used to point //! to a second buffer containing data for transmission or providing //! storage for a received frame. // void *pvBuffer2; } tEMACDES3; //***************************************************************************** // //! A structure defining a single Ethernet DMA buffer descriptor. // //***************************************************************************** struct tEMACDMADescriptor { // //! The first DMA descriptor word contains various control and status bits //! depending upon whether the descriptor is in the transmit or receive //! queue. Bit 31 is always the ``OWN'' bit which, when set, indicates //! that the hardware has control of the descriptor. // volatile uint32_t ui32CtrlStatus; // //! The second descriptor word contains information on the size of the //! buffer or buffers attached to the descriptor and various additional //! control bits. // volatile uint32_t ui32Count; // //! The third descriptor word contains a pointer to the buffer containing //! data to transmit or into which received data should be written. This //! pointer must refer to a buffer in internal SRAM. Pointers to flash or //! EPI-connected memory may not be used and will result in the MAC //! reporting a bus error. // void *pvBuffer1; // //! The fourth descriptor word contains either a pointer to the next //! descriptor in the ring or a pointer to a second data buffer. The //! meaning of the word is controlled by the ``CHAINED'' control bit which //! appears in the first word of the transmit descriptor or the second //! word of the receive descriptor. //! tEMACDES3 DES3; // //! The fifth descriptor word is reserved for transmit descriptors but //! used to report extended status in a receive descriptor. // volatile uint32_t ui32ExtRxStatus; // //! The sixth descriptor word is reserved for both transmit and receive //! descriptors. // uint32_t ui32Reserved; // //! The seventh descriptor word contains the low 32 bits of the 64-bit //! timestamp captured for transmitted or received data. The value is set //! only when the transmitted or received data contains the end of a //! packet. Availability of the timestamp is indicated via a status bit //! in the first descriptor word. // volatile uint32_t ui32IEEE1588TimeLo; // //! The eighth descriptor word contains the high 32 bits of the 64-bit //! timestamp captured for transmitted or received data. // volatile uint32_t ui32IEEE1588TimeHi; }; //***************************************************************************** // // Fields found in the DES0 word of the transmit descriptor (ui32CtrlStatus in // tEMACDMADescriptor) // //***************************************************************************** #define DES0_TX_CTRL_OWN 0x80000000 #define DES0_TX_CTRL_INTERRUPT 0x40000000 #define DES0_TX_CTRL_LAST_SEG 0x20000000 #define DES0_TX_CTRL_FIRST_SEG 0x10000000 // // This value indicates that the MAC should not append a CRC to transmitted // packets. If used with DES0_TX_CTRL_REPLACE_CRC, the last 4 bytes of the // packet passed to the transmitter are replaced with a newly calculated CRC. // If DES0_TX_CTRL_REPLACE_CRC is not specified, it is assumed that packets // transmitted have valid CRCs precomputed and included in the frame data. // // If DES0_TX_CTRL_DISABLE_CRC is not specified, the MAC will calculate the // CRC for all frames transmitted and append this value as the 4-byte FCS // after the last data byte in the frame. // #define DES0_TX_CTRL_DISABLE_CRC 0x08000000 #define DES0_TX_CTRL_DISABLE_PADDING 0x04000000 #define DES0_TX_CTRL_ENABLE_TS 0x02000000 // // This value is only valid if used alongside DES0_TX_CTRL_DISABLE_CRC. When // specified, the MAC will replace the last 4 bytes of a transmitted frame // with a newly calculated CRC. // #define DES0_TX_CTRL_REPLACE_CRC 0x01000000 #define DES0_TX_CTRL_CHKSUM_M 0x00C00000 #define DES0_TX_CTRL_NO_CHKSUM 0x00000000 #define DES0_TX_CTRL_IP_HDR_CHKSUM 0x00400000 #define DES0_TX_CTRL_IP_HDR_PAY_CHKSUM 0x00800000 #define DES0_TX_CTRL_IP_ALL_CKHSUMS 0x00C00000 #define DES0_TX_CTRL_END_OF_RING 0x00200000 #define DES0_TX_CTRL_CHAINED 0x00100000 #define DES0_TX_CTRL_VLAN_M 0x000C0000 #define DES0_TX_CTRL_VLAN_NONE 0x00000000 #define DES0_TX_CTRL_VLAN_REMOVE 0x00040000 #define DES0_TX_CTRL_VLAN_INSERT 0x00080000 #define DES0_TX_CTRL_VLAN_REPLACE 0x000C0000 #define DES0_TX_STAT_TS_CAPTURED 0x00020000 #define DES0_TX_STAT_IPH_ERR 0x00010000 #define DES0_TX_STAT_ERR 0x00008000 #define DES0_TX_STAT_JABBER_TO 0x00004000 #define DES0_TX_STAT_FLUSHED 0x00002000 #define DES0_TX_STAT_PAYLOAD_ERR 0x00001000 #define DES0_TX_STAT_CARRIER_LOST 0x00000800 #define DES0_TX_STAT_NO_CARRIER 0x00000400 #define DES0_TX_STAT_TX_L_COLLISION 0x00000200 #define DES0_TX_STAT_E_COLLISION 0x00000100 #define DES0_TX_STAT_VLAN_FRAME 0x00000080 #define DES0_TX_STAT_COL_COUNT_M 0x00000078 #define DES0_TX_STAT_COL_COUNT_S 3 #define DES0_TX_STAT_E_DEFERRAL 0x00000004 #define DES0_TX_STAT_UNDERFLOW 0x00000002 #define DES0_TX_STAT_DEFERRED 0x00000001 //***************************************************************************** // // Fields found in the DES1 word of the transmit descriptor (ui32Count in // tEMACDMADescriptor) // //***************************************************************************** #define DES1_TX_CTRL_SADDR_MAC1 0x80000000 #define DES1_TX_CTRL_SADDR_M 0x60000000 #define DES1_TX_CTRL_SADDR_NONE 0x00000000 #define DES1_TX_CTRL_SADDR_INSERT 0x20000000 #define DES1_TX_CTRL_SADDR_REPLACE 0x40000000 #define DES1_TX_CTRL_BUFF2_SIZE_M 0x1FFF0000 #define DES1_TX_CTRL_BUFF1_SIZE_M 0x00001FFF #define DES1_TX_CTRL_BUFF2_SIZE_S 16 #define DES1_TX_CTRL_BUFF1_SIZE_S 0 //***************************************************************************** // // Fields found in the DES0 word of the receive descriptor (ui32CtrlStatus in // tEMACDMADescriptor) // //***************************************************************************** #define DES0_RX_CTRL_OWN 0x80000000 #define DES0_RX_STAT_DEST_ADDR_FAIL 0x40000000 #define DES0_RX_STAT_FRAME_LENGTH_M 0x3FFF0000 #define DES0_RX_STAT_FRAME_LENGTH_S 16 #define DES0_RX_STAT_ERR 0x00008000 #define DES0_RX_STAT_DESCRIPTOR_ERR 0x00004000 #define DES0_RX_STAT_SRC_ADDR_FAIL 0x00002000 #define DES0_RX_STAT_LENGTH_ERR 0x00001000 #define DES0_RX_STAT_OVERFLOW 0x00000800 #define DES0_RX_STAT_VLAN_TAG 0x00000400 #define DES0_RX_STAT_FIRST_DESC 0x00000200 #define DES0_RX_STAT_LAST_DESC 0x00000100 #define DES0_RX_STAT_TS_AVAILABLE 0x00000080 #define DES0_RX_STAT_RX_L_COLLISION 0x00000040 #define DES0_RX_STAT_FRAME_TYPE 0x00000020 #define DES0_RX_STAT_WDOG_TIMEOUT 0x00000010 #define DES0_RX_STAT_RX_ERR 0x00000008 #define DES0_RX_STAT_DRIBBLE_ERR 0x00000004 #define DES0_RX_STAT_CRC_ERR 0x00000002 #define DES0_RX_STAT_MAC_ADDR 0x00000001 #define DES0_RX_STAT_EXT_AVAILABLE 0x00000001 //***************************************************************************** // // Fields found in the DES1 word of the receive descriptor (ui32Count in // tEMACDMADescriptor) // //***************************************************************************** #define DES1_RX_CTRL_DISABLE_INT 0x80000000 #define DES1_RX_CTRL_BUFF2_SIZE_M 0x1FFF0000 #define DES1_RX_CTRL_BUFF2_SIZE_S 16 #define DES1_RX_CTRL_END_OF_RING 0x00008000 #define DES1_RX_CTRL_CHAINED 0x00004000 #define DES1_RX_CTRL_BUFF1_SIZE_M 0x00001FFF #define DES1_RX_CTRL_BUFF1_SIZE_S 0 //***************************************************************************** // // Fields found in the DES4 word of the receive descriptor (ui32ExtRxStatus in // tEMACDMADescriptor) // //***************************************************************************** #define DES4_RX_STAT_TS_DROPPED 0x00004000 #define DES4_RX_STAT_PTP_VERSION2 0x00002000 #define DES4_RX_STAT_PTP_TYPE_ETH 0x00001000 #define DES4_RX_STAT_PTP_TYPE_UDP 0x00000000 #define DES4_RX_STAT_PTP_MT_M 0x00000F00 #define DES4_RX_STAT_PTP_MT_NONE 0x00000000 #define DES4_RX_STAT_PTP_MT_SYNC 0x00000100 #define DES4_RX_STAT_PTP_MT_FOLLOW_UP 0x00000200 #define DES4_RX_STAT_PTP_MT_DELAY_REQ 0x00000300 #define DES4_RX_STAT_PTP_MT_DELAY_RESP 0x00000400 #define DES4_RX_STAT_PTP_MT_PDELAY_REQ 0x00000500 #define DES4_RX_STAT_PTP_MT_PDELAY_RESP 0x00000600 #define DES4_RX_STAT_PTP_MT_PDELAY_RFU 0x00000700 #define DES4_RX_STAT_PTP_MT_ANNOUNCE 0x00000800 #define DES4_RX_STAT_PTP_MT_SIGNALLING 0x00000A00 #define DES4_RX_STAT_PTP_MT_RESERVED 0x00000F00 #define DES4_RX_STAT_IPV6 0x00000080 #define DES4_RX_STAT_IPV4 0x00000040 #define DES4_RX_STAT_IP_CHK_BYPASSED 0x00000020 #define DES4_RX_STAT_IP_PAYLOAD_ERR 0x00000010 #define DES4_RX_STAT_IP_HEADER_ERR 0x00000008 #define DES4_RX_STAT_PAYLOAD_M 0x00000007 #define DES4_RX_STAT_PAYLOAD_UNKNOWN 0x00000000 #define DES4_RX_STAT_PAYLOAD_UDP 0x00000001 #define DES4_RX_STAT_PAYLOAD_TCP 0x00000002 #define DES4_RX_STAT_PAYLOAD_ICMP 0x00000003 //***************************************************************************** // // Values used in the ui32BusConfig parameter to EMACInit(). // //*************************************************************************** #define EMAC_BCONFIG_DMA_PRIO_WEIGHT_M 0x30000000 #define EMAC_BCONFIG_DMA_PRIO_WEIGHT_1 0x00000000 #define EMAC_BCONFIG_DMA_PRIO_WEIGHT_2 0x10000000 #define EMAC_BCONFIG_DMA_PRIO_WEIGHT_3 0x20000000 #define EMAC_BCONFIG_DMA_PRIO_WEIGHT_4 0x30000000 #define EMAC_BCONFIG_TX_PRIORITY 0x08000000 #define EMAC_BCONFIG_ADDR_ALIGNED 0x02000000 #define EMAC_BCONFIG_PRIORITY_M 0x0000C000 #define EMAC_BCONFIG_PRIORITY_1_1 (0 << 14) #define EMAC_BCONFIG_PRIORITY_2_1 (1 << 14) #define EMAC_BCONFIG_PRIORITY_3_1 (2 << 14) #define EMAC_BCONFIG_PRIORITY_4_1 (3 << 14) #define EMAC_BCONFIG_PRIORITY_FIXED 0x00000002 #define EMAC_BCONFIG_FIXED_BURST 0x00010000 #define EMAC_BCONFIG_MIXED_BURST 0x04000000 //***************************************************************************** // // Options used in the ui32Config parameter to EMACPHYConfigSet(). // //***************************************************************************** #define EMAC_PHY_TYPE_INTERNAL 0x00000000 #define EMAC_PHY_TYPE_EXTERNAL_MII 0x80000000 #define EMAC_PHY_TYPE_EXTERNAL_RMII 0xC0000000 #define EMAC_PHY_INT_NIB_TXERR_DET_DIS 0x01000000 #define EMAC_PHY_INT_RX_ER_DURING_IDLE 0x00800000 #define EMAC_PHY_INT_ISOLATE_MII_LLOSS 0x00400000 #define EMAC_PHY_INT_LINK_LOSS_RECOVERY 0x00200000 #define EMAC_PHY_INT_TDRRUN 0x00100000 #define EMAC_PHY_INT_LD_ON_RX_ERR_COUNT 0x00040000 #define EMAC_PHY_INT_LD_ON_MTL3_ERR_COUNT 0x00020000 #define EMAC_PHY_INT_LD_ON_LOW_SNR 0x00010000 #define EMAC_PHY_INT_LD_ON_SIGNAL_ENERGY 0x00008000 #define EMAC_PHY_INT_POLARITY_SWAP 0x00004000 #define EMAC_PHY_INT_MDI_SWAP 0x00002000 #define EMAC_PHY_INT_ROBUST_MDIX 0x00001000 #define EMAC_PHY_INT_FAST_MDIX 0x00000800 #define EMAC_PHY_INT_MDIX_EN 0x00000400 #define EMAC_PHY_INT_FAST_RXDV_DETECT 0x00000200 #define EMAC_PHY_INT_FAST_L_UP_DETECT 0x00000100 #define EMAC_PHY_INT_EXT_FULL_DUPLEX 0x00000080 #define EMAC_PHY_INT_FAST_AN_80_50_35 0x00000040 #define EMAC_PHY_INT_FAST_AN_120_75_50 0x00000050 #define EMAC_PHY_INT_FAST_AN_140_150_100 0x00000060 #define EMAC_PHY_FORCE_10B_T_HALF_DUPLEX 0x00000000 #define EMAC_PHY_FORCE_10B_T_FULL_DUPLEX 0x00000002 #define EMAC_PHY_FORCE_100B_T_HALF_DUPLEX 0x00000004 #define EMAC_PHY_FORCE_100B_T_FULL_DUPLEX 0x00000006 #define EMAC_PHY_AN_10B_T_HALF_DUPLEX 0x00000008 #define EMAC_PHY_AN_10B_T_FULL_DUPLEX 0x0000000A #define EMAC_PHY_AN_100B_T_HALF_DUPLEX 0x0000000C #define EMAC_PHY_AN_100B_T_FULL_DUPLEX 0x0000000E #define EMAC_PHY_INT_HOLD 0x00000001 #define EMAC_PHY_TYPE_MASK 0xC0000000 //***************************************************************************** // // Options used in the ui32Config parameter to EMACConfigSet(). // //***************************************************************************** #define EMAC_CONFIG_USE_MACADDR1 0x40000000 #define EMAC_CONFIG_USE_MACADDR0 0x00000000 #define EMAC_CONFIG_SA_FROM_DESCRIPTOR 0x00000000 #define EMAC_CONFIG_SA_INSERT 0x20000000 #define EMAC_CONFIG_SA_REPLACE 0x30000000 #define EMAC_CONFIG_2K_PACKETS 0x08000000 #define EMAC_CONFIG_STRIP_CRC 0x02000000 #define EMAC_CONFIG_JABBER_DISABLE 0x00400000 #define EMAC_CONFIG_JUMBO_ENABLE 0x00100000 #define EMAC_CONFIG_IF_GAP_MASK 0x000E0000 #define EMAC_CONFIG_IF_GAP_96BITS (0x0 << 17) #define EMAC_CONFIG_IF_GAP_88BITS (0x1 << 17) #define EMAC_CONFIG_IF_GAP_80BITS (0x2 << 17) #define EMAC_CONFIG_IF_GAP_72BITS (0x3 << 17) #define EMAC_CONFIG_IF_GAP_64BITS (0x4 << 17) #define EMAC_CONFIG_IF_GAP_56BITS (0x5 << 17) #define EMAC_CONFIG_IF_GAP_48BITS (0x6 << 17) #define EMAC_CONFIG_IF_GAP_40BITS (0x7 << 17) #define EMAC_CONFIG_CS_DISABLE 0x00010000 #define EMAC_CONFIG_100MBPS 0x00004000 #define EMAC_CONFIG_10MBPS 0x00000000 #define EMAC_CONFIG_RX_OWN_DISABLE 0x00002000 #define EMAC_CONFIG_LOOPBACK 0x00001000 #define EMAC_CONFIG_FULL_DUPLEX 0x00000800 #define EMAC_CONFIG_HALF_DUPLEX 0x00000000 #define EMAC_CONFIG_CHECKSUM_OFFLOAD 0x00000400 #define EMAC_CONFIG_RETRY_DISABLE 0x00000200 #define EMAC_CONFIG_AUTO_CRC_STRIPPING 0x00000080 #define EMAC_CONFIG_BO_MASK 0x00000060 #define EMAC_CONFIG_BO_LIMIT_1024 (0x0 << 5) #define EMAC_CONFIG_BO_LIMIT_256 (0x1 << 5) #define EMAC_CONFIG_BO_LIMIT_16 (0x2 << 5) #define EMAC_CONFIG_BO_LIMIT_2 (0x3 << 5) #define EMAC_CONFIG_DEFERRAL_CHK_ENABLE 0x00000010 #define EMAC_CONFIG_PREAMBLE_MASK 0x00000003 #define EMAC_CONFIG_7BYTE_PREAMBLE 0x00000000 #define EMAC_CONFIG_5BYTE_PREAMBLE 0x00000001 #define EMAC_CONFIG_3BYTE_PREAMBLE 0x00000002 //***************************************************************************** // // Options used in the ui32ModeFlags parameter to EMACConfigSet(). // //***************************************************************************** #define EMAC_MODE_KEEP_BAD_CRC 0x04000000 #define EMAC_MODE_RX_STORE_FORWARD 0x02000000 #define EMAC_MODE_RX_FLUSH_DISABLE 0x01000000 #define EMAC_MODE_TX_STORE_FORWARD 0x00200000 #define EMAC_MODE_TX_THRESHOLD_16_BYTES (7 << 14) #define EMAC_MODE_TX_THRESHOLD_24_BYTES (6 << 14) #define EMAC_MODE_TX_THRESHOLD_32_BYTES (5 << 14) #define EMAC_MODE_TX_THRESHOLD_40_BYTES (4 << 14) #define EMAC_MODE_TX_THRESHOLD_64_BYTES (0 << 14) #define EMAC_MODE_TX_THRESHOLD_128_BYTES (1 << 14) #define EMAC_MODE_TX_THRESHOLD_192_BYTES (2 << 14) #define EMAC_MODE_TX_THRESHOLD_256_BYTES (3 << 14) #define EMAC_MODE_RX_ERROR_FRAMES 0x00000080 #define EMAC_MODE_RX_UNDERSIZED_FRAMES 0x00000040 #define EMAC_MODE_RX_THRESHOLD_64_BYTES (0 << 3) #define EMAC_MODE_RX_THRESHOLD_32_BYTES (1 << 3) #define EMAC_MODE_RX_THRESHOLD_96_BYTES (2 << 3) #define EMAC_MODE_RX_THRESHOLD_128_BYTES (3 << 3) #define EMAC_MODE_OPERATE_2ND_FRAME 0x00000002 //***************************************************************************** // // These two values may be returned by EMACConfigGet() in the *pui32Config // parameter. The transmitter and receiver are, however, enabled and disabled // using independent functions, EMACTxEnable/Disable() and // EMACRxEnable/Disable(). // //***************************************************************************** #define EMAC_CONFIG_TX_ENABLED 0x00000008 #define EMAC_CONFIG_RX_ENABLED 0x00000004 //***************************************************************************** // // These two values may be returned by EMACConfigGet() in the *pui32Mode // parameter. The transmit and receive DMA channels are, however, enabled and // disabled using independent functions, EMACTxEnable/Disable() and // EMACRxEnable/Disable(). // //***************************************************************************** #define EMAC_MODE_TX_DMA_ENABLED 0x00002000 #define EMAC_MODE_RX_DMA_ENABLED 0x00000002 //***************************************************************************** // // These values may be passed to EMACFrameFilterSet() in the ui32FilterOpts // parameter, and are returned by EMACFrameFilterGet(). // //***************************************************************************** #define EMAC_FRMFILTER_RX_ALL 0x80000000 #define EMAC_FRMFILTER_VLAN 0x00010000 #define EMAC_FRMFILTER_HASH_AND_PERFECT 0x00000400 #define EMAC_FRMFILTER_SADDR 0x00000200 #define EMAC_FRMFILTER_INV_SADDR 0x00000100 #define EMAC_FRMFILTER_PASS_MASK (0x03 << 6) #define EMAC_FRMFILTER_PASS_NO_CTRL (0x00 << 6) #define EMAC_FRMFILTER_PASS_NO_PAUSE (0x01 << 6) #define EMAC_FRMFILTER_PASS_ALL_CTRL (0x02 << 6) #define EMAC_FRMFILTER_PASS_ADDR_CTRL (0x03 << 6) #define EMAC_FRMFILTER_BROADCAST 0x00000020 #define EMAC_FRMFILTER_PASS_MULTICAST 0x00000010 #define EMAC_FRMFILTER_INV_DADDR 0x00000008 #define EMAC_FRMFILTER_HASH_MULTICAST 0x00000004 #define EMAC_FRMFILTER_HASH_UNICAST 0x00000002 #define EMAC_FRMFILTER_PROMISCUOUS 0x00000001 //***************************************************************************** // // Values which may be returned by EMACStatusGet(). // //***************************************************************************** #define EMAC_STATUS_TX_NOT_EMPTY 0x01000000 #define EMAC_STATUS_TX_WRITING_FIFO 0x00400000 #define EMAC_STATUS_TRC_STATE_MASK 0x00300000 #define EMAC_STATUS_TRC_STATE_IDLE (0x00 << 20) #define EMAC_STATUS_TRC_STATE_READING (0x01 << 20) #define EMAC_STATUS_TRC_STATE_WAITING (0x02 << 20) #define EMAC_STATUS_TRC_STATE_STATUS (0x03 << 20) #define EMAC_STATUS_TX_PAUSED 0x00080000 #define EMAC_STATUS_TFC_STATE_MASK 0x00060000 #define EMAC_STATUS_TFC_STATE_IDLE (0x00 << 17) #define EMAC_STATUS_TFC_STATE_WAITING (0x01 << 17) #define EMAC_STATUS_TFC_STATE_PAUSING (0x02 << 17) #define EMAC_STATUS_TFC_STATE_WRITING (0x03 << 17) #define EMAC_STATUS_MAC_NOT_IDLE 0x00010000 #define EMAC_STATUS_RX_FIFO_LEVEL_MASK 0x00000300 #define EMAC_STATUS_RX_FIFO_EMPTY (0x00 << 8) #define EMAC_STATUS_RX_FIFO_BELOW (0x01 << 8) #define EMAC_STATUS_RX_FIFO_ABOVE (0x02 << 8) #define EMAC_STATUS_RX_FIFO_FULL (0x03 << 8) #define EMAC_STATUS_RX_FIFO_STATE_MASK 0x00000060 #define EMAC_STATUS_RX_FIFO_IDLE (0x00 << 5) #define EMAC_STATUS_RX_FIFO_READING (0x01 << 5) #define EMAC_STATUS_RX_FIFO_STATUS (0x02 << 5) #define EMAC_STATUS_RX_FIFO_FLUSHING (0x03 << 5) #define EMAC_STATUS_RWC_ACTIVE 0x00000010 #define EMAC_STATUS_RPE_ACTIVE 0x00000001 //***************************************************************************** // // Values which may be returned by EMACDMAStateGet(). // //***************************************************************************** #define EMAC_DMA_TXSTAT_MASK (0x07 << 20) #define EMAC_DMA_TXSTAT_STOPPED (0x00 << 20) #define EMAC_DMA_TXSTAT_RUN_FETCH_DESC (0x01 << 20) #define EMAC_DMA_TXSTAT_RUN_WAIT_STATUS (0x02 << 20) #define EMAC_DMA_TXSTAT_RUN_READING (0x03 << 20) #define EMAC_DMA_TXSTAT_RUN_CLOSE_DESC (0x07 << 20) #define EMAC_DMA_TXSTAT_TS_WRITE (0x04 << 20) #define EMAC_DMA_TXSTAT_SUSPENDED (0x06 << 20) #define EMAC_DMA_RXSTAT_MASK (0x07 << 17) #define EMAC_DMA_RXSTAT_STOPPED (0x00 << 17) #define EMAC_DMA_RXSTAT_RUN_FETCH_DESC (0x01 << 17) #define EMAC_DMA_RXSTAT_RUN_WAIT_PACKET (0x03 << 17) #define EMAC_DMA_RXSTAT_SUSPENDED (0x04 << 17) #define EMAC_DMA_RXSTAT_RUN_CLOSE_DESC (0x05 << 17) #define EMAC_DMA_RXSTAT_TS_WRITE (0x06 << 17) #define EMAC_DMA_RXSTAT_RUN_RECEIVING (0x07 << 17) #define EMAC_TX_DMA_STATE(x) ((x) & EMAC_DMA_TXSTAT_MASK) #define EMAC_RX_DMA_STATE(x) ((x) & EMAC_DMA_RXSTAT_MASK) #define EMAC_DMA_ERROR 0x00002000 #define EMAC_DMA_ERR_MASK 0x03800000 #define EMAC_DMA_ERR_RX_DATA_WRITE 0x00000000 #define EMAC_DMA_ERR_TX_DATA_READ 0x01800000 #define EMAC_DMA_ERR_RX_DESC_WRITE 0x02000000 #define EMAC_DMA_ERR_TX_DESC_WRITE 0x02800000 #define EMAC_DMA_ERR_RX_DESC_READ 0x03000000 #define EMAC_DMA_ERR_TX_DESC_READ 0x03800000 //***************************************************************************** // // Values which may be ORed together in the ui32Config parameter passed to // EMACAddrFilterSet and which may be returned by EMACAddrFilterGet. // //***************************************************************************** #define EMAC_FILTER_ADDR_ENABLE 0x80000000 #define EMAC_FILTER_SOURCE_ADDR 0x40000000 #define EMAC_FILTER_MASK_BYTE_6 0x20000000 #define EMAC_FILTER_MASK_BYTE_5 0x10000000 #define EMAC_FILTER_MASK_BYTE_4 0x08000000 #define EMAC_FILTER_MASK_BYTE_3 0x04000000 #define EMAC_FILTER_MASK_BYTE_2 0x03000000 #define EMAC_FILTER_MASK_BYTE_1 0x01000000 #define EMAC_FILTER_BYTE_MASK_M 0x3F000000 #define EMAC_FILTER_BYTE_MASK_S 24 //***************************************************************************** // // Flags passed to EMACTimestampConfigSet or returned from // EMACTimestampConfigGet. // //***************************************************************************** #define EMAC_TS_MAC_FILTER_ENABLE 0x00040000 #define EMAC_TS_MAC_FILTER_DISABLE 0x00000000 #define EMAC_TS_SYNC_FOLLOW_DREQ_DRESP 0x00000000 #define EMAC_TS_SYNC_ONLY 0x00004000 #define EMAC_TS_DELAYREQ_ONLY 0x0000C000 #define EMAC_TS_ALL 0x00010000 #define EMAC_TS_SYNC_PDREQ_PDRESP 0x00014000 #define EMAC_TS_DREQ_PDREQ_PDRESP 0x0001C000 #define EMAC_TS_SYNC_DELAYREQ 0x00020000 #define EMAC_TS_PDREQ_PDRESP 0x00030000 #define EMAC_TS_PROCESS_IPV4_UDP 0x00002000 #define EMAC_TS_PROCESS_IPV6_UDP 0x00001000 #define EMAC_TS_PROCESS_ETHERNET 0x00000800 #define EMAC_TS_PTP_VERSION_2 0x00000400 #define EMAC_TS_PTP_VERSION_1 0x00000000 #define EMAC_TS_DIGITAL_ROLLOVER 0x00000200 #define EMAC_TS_BINARY_ROLLOVER 0x00000000 #define EMAC_TS_ALL_RX_FRAMES 0x00000100 #define EMAC_TS_UPDATE_FINE 0x00000002 #define EMAC_TS_UPDATE_COARSE 0x00000000 //***************************************************************************** // // Some register bit definitions relating to external PHYs. These are not // relevant (or available) when using the internal Ethernet PHY but having // the definitions here helps when using an external MII or RMII PHY. // //***************************************************************************** #define EPHY_SCR_INPOL_EXT 0x00000008 #define EPHY_SCR_TINT_EXT 0x00000004 #define EPHY_SCR_INTEN_EXT 0x00000002 #define EPHY_SCR_INTOE_EXT 0x00000001 //***************************************************************************** // // These interrupt sources may be passed to EMACIntEnable() and // EMACIntDisable() to enable or disable various Ethernet interrupt sources. // //***************************************************************************** // // Note that interrupts relating to timestamping and power management must be // independently enabled via calls to functions EMACTimestampTargetIntEnable // and EMACPowerManagementControlSet. // // EMAC_INT_PHY is deliberately set to a reserved bit in the MAC interrupt // register. We handle the fact that the PHY interrupt is controlled via an // independent register within the code. If we didn't do this, the app would // have to enable the MAC interrupt then enable the PHY interrupt via a // different API (since they share a vector). To further complicate matters, // they would have to call EMACIntStatus() and then, if it returned 0, // read the PHY interrupt status to see that it fired. This would be nasty // and unfriendly so we hide it inside DriverLib. // //***************************************************************************** #define EMAC_INT_PHY 0x80000000 #define EMAC_INT_EARLY_RECEIVE 0x00004000 #define EMAC_INT_BUS_ERROR 0x00002000 #define EMAC_INT_EARLY_TRANSMIT 0x00000400 #define EMAC_INT_RX_WATCHDOG 0x00000200 #define EMAC_INT_RX_STOPPED 0x00000100 #define EMAC_INT_RX_NO_BUFFER 0x00000080 #define EMAC_INT_RECEIVE 0x00000040 #define EMAC_INT_TX_UNDERFLOW 0x00000020 #define EMAC_INT_RX_OVERFLOW 0x00000010 #define EMAC_INT_TX_JABBER 0x00000008 #define EMAC_INT_TX_NO_BUFFER 0x00000004 #define EMAC_INT_TX_STOPPED 0x00000002 #define EMAC_INT_TRANSMIT 0x00000001 // // These interrupt sources are summary indicators. They are readable // using EMACIntStatus() and must be cleared using EMACIntClear(). They // may be enabled or disabled independently of the group of interrupts that // they are derived from but offer merely a simple way to be informed of a // normal or abnormal condition requiring software attention. // // EMAC_INT_NORMAL_INT is the logical OR of the masked state of // EMAC_INT_TRANSMIT | EMAC_INT_RECEIVE | EMAC_INT_TX_NO_BUFFER | // EMAC_INT_EARLY_RECEIVE. // // EMAC_INT_ABNORMAL_INT is the logical OR of the masked state of // EMAC_INT_TX_STOPPED | EMAC_INT_TX_JABBER | EMAC_INT_RX_OVERFLOW | // EMAC_INT_TX_UNDERFLOW | EMAC_INT_RX_NO_BUFFER | EMAC_INT_RX_STOPPED | // EMAC_INT_RX_WATCHDOG | EMAC_INT_EARLY_TRANSMIT | EMAC_INT_BUS_ERROR. // #define EMAC_INT_NORMAL_INT 0x00010000 #define EMAC_INT_ABNORMAL_INT 0x00008000 // // This interrupt source is readable using EMACIntStatus but must // be cleared by calling the EMACEEEStatus(). // #define EMAC_INT_LPI 0x40000000 // // This interrupt source is readable using EMACIntStatus but must // be cleared by calling the EMACTimestampIntStatus(). // #define EMAC_INT_TIMESTAMP 0x20000000 // // Interrupt sources which may be returned from EMACTimestampIntStatus(). // #define EMAC_TS_INT_TARGET_REACHED 0x00000002 #define EMAC_TS_INT_TS_SEC_OVERFLOW 0x00000001 // // This interrupt source is readable using EMACIntStatus but must // be cleared by calling EMACPowerManagementStatusGet(). // #define EMAC_INT_POWER_MGMNT 0x10000000 //***************************************************************************** // // Configuration flags that may be passed in the ui32FreqConfig parameter to // EMACTimestampPPSSimpleModeSet(). // //***************************************************************************** #define EMAC_PPS_SINGLE_PULSE 0x00000000 #define EMAC_PPS_1HZ 0x00000001 #define EMAC_PPS_2HZ 0x00000002 #define EMAC_PPS_4HZ 0x00000003 #define EMAC_PPS_8HZ 0x00000004 #define EMAC_PPS_16HZ 0x00000005 #define EMAC_PPS_32HZ 0x00000006 #define EMAC_PPS_64HZ 0x00000007 #define EMAC_PPS_128HZ 0x00000008 #define EMAC_PPS_256HZ 0x00000009 #define EMAC_PPS_512HZ 0x0000000A #define EMAC_PPS_1024HZ 0x0000000B #define EMAC_PPS_2048HZ 0x0000000C #define EMAC_PPS_4096HZ 0x0000000D #define EMAC_PPS_8192HZ 0x0000000E #define EMAC_PPS_16384HZ 0x0000000F #define EMAC_PPS_32768HZ 0x00000010 //***************************************************************************** // // Configuration flags that may be passed in the ui32Config parameter to // EMACTimestampPPSCommandModeSet(). // //***************************************************************************** #define EMAC_PPS_TARGET_INT 0x00000000 #define EMAC_PPS_TARGET_PPS 0x00000060 #define EMAC_PPS_TARGET_BOTH 0x00000040 //***************************************************************************** // // Commands which may be passed to EMACTimestampPPSCmd. // //***************************************************************************** #define EMAC_PPS_COMMAND_NONE 0x00 #define EMAC_PPS_COMMAND_START_SINGLE 0x01 #define EMAC_PPS_COMMAND_START_TRAIN 0x02 #define EMAC_PPS_COMMAND_CANCEL_START 0x03 #define EMAC_PPS_COMMAND_STOP_AT_TIME 0x04 #define EMAC_PPS_COMMAND_STOP_NOW 0x05 #define EMAC_PPS_COMMAND_CANCEL_STOP 0x06 //***************************************************************************** // // Values which may be passed to EMACVLANRxConfigSet in the ui32Config // parameter and which may be returned from EMACVLANRxConfigGet. // //***************************************************************************** #define EMAC_VLAN_RX_HASH_ENABLE 0x00080000 #define EMAC_VLAN_RX_HASH_DISABLE 0x00000000 #define EMAC_VLAN_RX_SVLAN_ENABLE 0x00040000 #define EMAC_VLAN_RX_SVLAN_DISABLE 0x00000000 #define EMAC_VLAN_RX_NORMAL_MATCH 0x00000000 #define EMAC_VLAN_RX_INVERSE_MATCH 0x00020000 #define EMAC_VLAN_RX_12BIT_TAG 0x00010000 #define EMAC_VLAN_RX_16BIT_TAG 0x00000000 //***************************************************************************** // // Values which may be passed to EMACVLANTxConfigSet in the ui32Config // parameter and which may be returned from EMACVLANTxConfigGet. // //***************************************************************************** #define EMAC_VLAN_TX_CVLAN 0x00000000 #define EMAC_VLAN_TX_SVLAN 0x00080000 #define EMAC_VLAN_TX_USE_VLC 0x00040000 #define EMAC_VLAN_TX_VLC_NONE 0x00000000 #define EMAC_VLAN_TX_VLC_DELETE 0x00010000 #define EMAC_VLAN_TX_VLC_INSERT 0x00020000 #define EMAC_VLAN_TX_VLC_REPLACE 0x00030000 #define EMAC_VLAN_TX_VLC_MASK 0x00030000 #define EMAC_RWU_FILTER_ENABLE 1 #define EMAC_RWU_FILTER_DISABLE 0 #define EMAC_RWU_FILTER_MULTICAST 8 #define EMAC_RWU_FILTER_UNICAST 0 //***************************************************************************** // // The following structure fields must be packed. // //***************************************************************************** #ifdef __ICCARM__ #pragma pack(1) #endif //***************************************************************************** // //! This structure defines up to 4 filters that can be used to define specific //! frames which will cause the MAC to wake up from sleep mode. // //***************************************************************************** typedef struct { // //! A byte mask for each filter defining which bytes from a sequence of //! 31 (bit 31 must be clear in each mask) are used to filter incoming //! packets. A 1 indicates that the relevant byte is used to update the //! CRC16 for the filter, a 0 indicates that the byte is ignored. // uint32_t pui32ByteMask[4]; // //! Defines whether each filter is enabled and, if so, whether it filters //! multicast or unicast frames. Valid values are one of //! EMAC_RWU_FILTER_ENABLE or EMAC_RWU_FILTER_DISABLE ORed with one of //! EMAC_RWU_FILTER_UNICAST or EMAC_RWU_FILTER_MULTICAST. // uint8_t pui8Command[4]; // //! Determines the byte offset within the frame at which the filter starts //! examining bytes. The minimum value for each offset is 12. The first //! byte of a frame is offset 0. // uint8_t pui8Offset[4]; // //! The CRC16 value that is expected for each filter if it passes. The //! CRC is calculated using all bytes indicated by the filter's mask. // uint16_t pui16CRC[4]; } #if defined(__TI_ARM__) || \ defined(codered) || \ defined(__GNUC__) || \ defined(rvmdk) || \ defined(__ARMCC_VERSION) || \ defined(sourcerygxx) __attribute__((packed)) tEMACWakeUpFrameFilter; #else tEMACWakeUpFrameFilter; #endif //***************************************************************************** // // Turn off structure packing again. // //***************************************************************************** #ifdef __ICCARM__ #pragma pack() #endif //***************************************************************************** // // Values which may be ORed together and used in the ui32Flags parameter to // EMACPowerManagementControlSet. These may also returned be from a call to // EMACPowerManagementControlGet. // //***************************************************************************** #define EMAC_PMT_GLOBAL_UNICAST_ENABLE 0x00000200 #define EMAC_PMT_WAKEUP_PACKET_ENABLE 0x00000004 #define EMAC_PMT_MAGIC_PACKET_ENABLE 0x00000002 #define EMAC_PMT_POWER_DOWN 0x00000001 //***************************************************************************** // // Values which may be ORed together and returned from a call to // EMACPowerManagementStatusGet. This call will also return // EMAC_PMT_POWER_DOWN if the MAC is in power-down mode. // //***************************************************************************** #define EMAC_PMT_WAKEUP_PACKET_RECEIVED 0x00000040 #define EMAC_PMT_MAGIC_PACKET_RECEIVED 0x00000020 //***************************************************************************** // // Close the Doxygen group. //! @} // //***************************************************************************** //***************************************************************************** // // Public function prototypes. // //***************************************************************************** extern void EMACInit(uint32_t ui32Base, uint32_t ui32SysClk, uint32_t ui32BusConfig, uint32_t ui32RxBurst, uint32_t ui32TxBurst, uint32_t ui32DescSkipSize); extern void EMACReset(uint32_t ui32Base); extern void EMACPHYConfigSet(uint32_t ui32Base, uint32_t ui32Config); extern void EMACConfigSet(uint32_t ui32Base, uint32_t ui32Config, uint32_t ui32ModeFlags, uint32_t ui32RxMaxFrameSize); extern void EMACFrameFilterSet(uint32_t ui32Base, uint32_t ui32FilterOpts); extern uint32_t EMACFrameFilterGet(uint32_t ui32Base); extern void EMACHashFilterSet(uint32_t ui32Base, uint32_t ui32HashHi, uint32_t ui32HashLo); extern void EMACHashFilterGet(uint32_t ui32Base, uint32_t *pui32HashHi, uint32_t *pui32HashLo); extern uint32_t EMACHashFilterBitCalculate(uint8_t *pui8MACAddr); extern void EMACTxDMAPollDemand(uint32_t ui32Base); extern void EMACRxDMAPollDemand(uint32_t ui32Base); extern void EMACRxDMADescriptorListSet(uint32_t ui32Base, tEMACDMADescriptor *pDescriptor); extern tEMACDMADescriptor *EMACRxDMADescriptorListGet(uint32_t ui32Base); extern tEMACDMADescriptor *EMACRxDMACurrentDescriptorGet(uint32_t ui32Base); extern uint8_t *EMACRxDMACurrentBufferGet(uint32_t ui32Base); extern void EMACTxDMADescriptorListSet(uint32_t ui32Base, tEMACDMADescriptor *pDescriptor); extern tEMACDMADescriptor *EMACTxDMADescriptorListGet(uint32_t ui32Base); extern tEMACDMADescriptor *EMACTxDMACurrentDescriptorGet(uint32_t ui32Base); extern uint8_t *EMACTxDMACurrentBufferGet(uint32_t ui32Base); extern void EMACConfigGet(uint32_t ui32Base, uint32_t *pui32Config, uint32_t *pui32Mode, uint32_t *pui32RxMaxFrameSize); extern void EMACAddrSet(uint32_t ui32Base, uint32_t ui32Index, const uint8_t *pui8MACAddr); extern void EMACAddrGet(uint32_t ui32Base, uint32_t ui32Index, uint8_t *pui8MACAddr); extern uint32_t EMACNumAddrGet(uint32_t ui32Base); extern void EMACAddrFilterSet(uint32_t ui32Base, uint32_t ui32Index, uint32_t ui32Config); extern uint32_t EMACAddrFilterGet(uint32_t ui32Base, uint32_t ui32Index); extern void EMACRxWatchdogTimerSet(uint32_t ui32Base, uint8_t ui8Timeout); extern uint32_t EMACStatusGet(uint32_t ui32Base); extern uint32_t EMACDMAStateGet(uint32_t ui32Base); extern void EMACTxFlush(uint32_t ui32Base); extern void EMACTxEnable(uint32_t ui32Base); extern void EMACTxDisable(uint32_t ui32Base); extern void EMACRxEnable(uint32_t ui32Base); extern void EMACRxDisable(uint32_t ui32Base); extern void EMACIntEnable(uint32_t ui32Base, uint32_t ui32IntFlags); extern void EMACIntDisable(uint32_t ui32Base, uint32_t ui32IntFlags); extern uint32_t EMACIntStatus(uint32_t ui32Base, bool bMasked); extern void EMACIntClear(uint32_t ui32Base, uint32_t ui32IntFlags); extern void EMACIntRegister(uint32_t ui32Base, void (*pfnHandler)(void)); extern void EMACIntUnregister(uint32_t ui32Base); extern void EMACPHYWrite(uint32_t ui32Base, uint8_t ui8PhyAddr, uint8_t ui8RegAddr, uint16_t ui16Data); extern void EMACPHYExtendedWrite(uint32_t ui32Base, uint8_t ui8PhyAddr, uint16_t ui16RegAddr, uint16_t ui16Data); extern uint16_t EMACPHYRead(uint32_t ui32Base, uint8_t ui8PhyAddr, uint8_t ui8RegAddr); extern uint16_t EMACPHYExtendedRead(uint32_t ui32Base, uint8_t ui8PhyAddr, uint16_t ui16RegAddr); extern void EMACPHYPowerOff(uint32_t ui32Base, uint8_t ui8PhyAddr); extern void EMACPHYPowerOn(uint32_t ui32Base, uint8_t ui8PhyAddr); extern void EMACTimestampConfigSet(uint32_t ui32Base, uint32_t ui32Config, uint32_t ui32SubSecondInc); extern uint32_t EMACTimestampConfigGet(uint32_t ui32Base, uint32_t *pui32SubSecondInc); extern void EMACTimestampAddendSet(uint32_t ui32Base, uint32_t ui32Seconds); extern void EMACTimestampEnable(uint32_t ui32Base); extern void EMACTimestampDisable(uint32_t ui32Base); extern void EMACTimestampSysTimeSet(uint32_t ui32Base, uint32_t ui32Seconds, uint32_t ui32SubSeconds); extern void EMACTimestampSysTimeGet(uint32_t ui32Base, uint32_t *pui32Seconds, uint32_t *pui32SubSeconds); extern void EMACTimestampSysTimeUpdate(uint32_t ui32Base, uint32_t ui32Seconds, uint32_t ui32SubSeconds, bool bInc); extern void EMACTimestampTargetSet(uint32_t ui32Base, uint32_t ui32Seconds, uint32_t ui32Nanoseconds); extern void EMACTimestampTargetIntEnable(uint32_t ui32Base); extern void EMACTimestampTargetIntDisable(uint32_t ui32Base); extern uint32_t EMACTimestampIntStatus(uint32_t ui32Base); extern void EMACTimestampPPSSimpleModeSet(uint32_t ui32Base, uint32_t ui32FreqConfig); extern void EMACTimestampPPSCommandModeSet(uint32_t ui32Base, uint32_t ui32Config); extern void EMACTimestampPPSCommand(uint32_t ui32Base, uint8_t ui8Cmd); extern void EMACTimestampPPSPeriodSet(uint32_t ui32Base, uint32_t ui32Period, uint32_t ui32Width); extern void EMACVLANRxConfigSet(uint32_t ui32Base, uint16_t ui16Tag, uint32_t ui32Config); extern uint32_t EMACVLANRxConfigGet(uint32_t ui32Base, uint16_t *pui16Tag); extern void EMACVLANTxConfigSet(uint32_t ui32Base, uint16_t ui16Tag, uint32_t ui32Config); extern uint32_t EMACVLANTxConfigGet(uint32_t ui32Base, uint16_t *pui16Tag); extern uint32_t EMACVLANHashFilterBitCalculate(uint16_t ui16Tag); extern void EMACVLANHashFilterSet(uint32_t ui32Base, uint32_t ui32Hash); extern uint32_t EMACVLANHashFilterGet(uint32_t ui32Base); extern void EMACRemoteWakeUpFrameFilterSet(uint32_t ui32Base, const tEMACWakeUpFrameFilter *pFilter); extern void EMACRemoteWakeUpFrameFilterGet(uint32_t ui32Base, tEMACWakeUpFrameFilter *pFilter); extern void EMACPowerManagementControlSet(uint32_t ui32Base, uint32_t ui32Flags); extern uint32_t EMACPowerManagementControlGet(uint32_t ui32Base); extern uint32_t EMACPowerManagementStatusGet(uint32_t ui32Base); extern void EMACWoLEnter(uint32_t ui32Base); extern void EMACLPIConfig(uint32_t ui32Base, bool bLPIConfig, uint16_t ui16LPILSTimer, uint16_t ui16LPITWTimer); extern void EMACLPIEnter(uint32_t ui32Base); extern uint16_t EMACLPIStatus(uint32_t ui32Base); extern void EMACLPILinkSet(uint32_t ui32Base); extern void EMACLPILinkClear(uint32_t ui32Base); extern void EMACPHYMMDWrite(uint32_t ui32Base, uint8_t ui8PhyAddr, uint16_t ui16RegAddr, uint16_t ui16Data); extern uint16_t EMACPHYMMDRead(uint32_t ui32Base, uint8_t ui8PhyAddr, uint16_t ui16RegAddr); //***************************************************************************** // // Mark the end of the C bindings section for C++ compilers. // //***************************************************************************** #ifdef __cplusplus } #endif #endif // __DRIVERLIB_EMAC_H__