/* * Copyright (c) 2006-2021, RT-Thread Development Team * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2017-08-08 Yang the first version */ #include #include "lwipopts.h" #include #include #include "drv_emac.h" #include "fsl_iocon.h" #include "fsl_sctimer.h" #include "fsl_phy.h" #define DEBUG //#define ETH_RX_DUMP //#define ETH_TX_DUMP #define ETH_STATISTICS #ifdef DEBUG #define ETH_PRINTF rt_kprintf #else #define ETH_PRINTF(...) #endif #define IOCON_PIO_DIGITAL_EN 0x0100u /*!< Enables digital function */ #define IOCON_PIO_FUNC0 0x00u /*!< Selects pin function 0 */ #define IOCON_PIO_FUNC1 0x01u /*!< Selects pin function 1 */ #define IOCON_PIO_FUNC7 0x07u /*!< Selects pin function 7 */ #define IOCON_PIO_INPFILT_OFF 0x0200u /*!< Input filter disabled */ #define IOCON_PIO_INV_DI 0x00u /*!< Input function is not inverted */ #define IOCON_PIO_MODE_INACT 0x00u /*!< No addition pin function */ #define IOCON_PIO_MODE_PULLUP 0x20u /*!< Selects pull-up function */ #define IOCON_PIO_OPENDRAIN_DI 0x00u /*!< Open drain is disabled */ #define IOCON_PIO_SLEW_FAST 0x0400u /*!< Fast mode, slew rate control is disabled */ #define IOCON_PIO_SLEW_STANDARD 0x00u /*!< Standard mode, output slew rate control is enabled */ #define PIN8_IDX 8u /*!< Pin number for pin 8 in a port 4 */ #define PIN10_IDX 10u /*!< Pin number for pin 10 in a port 4 */ #define PIN11_IDX 11u /*!< Pin number for pin 11 in a port 4 */ #define PIN12_IDX 12u /*!< Pin number for pin 12 in a port 4 */ #define PIN13_IDX 13u /*!< Pin number for pin 13 in a port 4 */ #define PIN14_IDX 14u /*!< Pin number for pin 14 in a port 4 */ #define PIN15_IDX 15u /*!< Pin number for pin 15 in a port 4 */ #define PIN16_IDX 16u /*!< Pin number for pin 16 in a port 4 */ #define PIN17_IDX 17u /*!< Pin number for pin 17 in a port 0 */ #define PIN26_IDX 26u /*!< Pin number for pin 26 in a port 2 */ #define PIN29_IDX 29u /*!< Pin number for pin 29 in a port 0 */ #define PIN30_IDX 30u /*!< Pin number for pin 30 in a port 0 */ #define PORT0_IDX 0u /*!< Port index */ #define PORT2_IDX 2u /*!< Port index */ #define PORT4_IDX 4u /*!< Port index */ #define MAX_ADDR_LEN 6u #define ENET_RXBD_NUM 4u #define ENET_TXBD_NUM 4u #define ENET_ALIGN(x) \ ((unsigned int)((x) + ((ENET_BUFF_ALIGNMENT)-1)) & (unsigned int)(~(unsigned int)((ENET_BUFF_ALIGNMENT)-1))) #define ENET_RXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN) #define ENET_TXBUFF_SIZE (ENET_FRAME_MAX_FRAMELEN) struct lpc_emac { /* inherit from ethernet device */ struct eth_device parent; struct rt_semaphore tx_wait; ENET_Type *base; enet_handle_t handle; /* interface address info. */ rt_uint8_t dev_addr[MAX_ADDR_LEN]; /* hw address */ uint32_t phyAddr; uint8_t RxBuffDescrip[ENET_RXBD_NUM * sizeof(enet_rx_bd_struct_t) + ENET_BUFF_ALIGNMENT]; uint8_t TxBuffDescrip[ENET_TXBD_NUM * sizeof(enet_tx_bd_struct_t) + ENET_BUFF_ALIGNMENT]; uint8_t RxDataBuff[ENET_RXBD_NUM * ENET_ALIGN(ENET_RXBUFF_SIZE) + ENET_BUFF_ALIGNMENT]; uint8_t TxDataBuff[ENET_TXBD_NUM * ENET_ALIGN(ENET_TXBUFF_SIZE) + ENET_BUFF_ALIGNMENT]; uint8_t txIdx; }; static struct lpc_emac lpc_emac_device; #ifdef ETH_STATISTICS static uint32_t isr_rx_counter = 0; static uint32_t isr_tx_counter = 0; #endif static inline enet_rx_bd_struct_t *get_rx_desc(uint32_t index) { return (enet_rx_bd_struct_t *)ENET_ALIGN(&lpc_emac_device.RxBuffDescrip[index * sizeof(enet_rx_bd_struct_t)]); } static inline enet_tx_bd_struct_t *get_tx_desc(uint32_t index) { return (enet_tx_bd_struct_t *)ENET_ALIGN(&lpc_emac_device.TxBuffDescrip[index * sizeof(enet_tx_bd_struct_t)]); } #if defined(ETH_RX_DUMP) || defined(ETH_TX_DUMP) static void packet_dump(const char * msg, const struct pbuf* p) { const struct pbuf* q; rt_uint32_t i,j; rt_uint8_t *ptr; rt_kprintf("%s %d byte\n", msg, p->tot_len); i=0; for(q=p; q != RT_NULL; q= q->next) { ptr = q->payload; for(j=0; jlen; j++) { if( (i%8) == 0 ) { rt_kprintf(" "); } if( (i%16) == 0 ) { rt_kprintf("\r\n"); } rt_kprintf("%02x ",*ptr); i++; ptr++; } } rt_kprintf("\n\n"); } #else #define packet_dump(...) #endif /* dump */ static void ethernet_callback(ENET_Type *base, enet_handle_t *handle, enet_event_t event, uint8_t channel, void *param) { switch (event) { case kENET_RxIntEvent: #ifdef ETH_STATISTICS isr_rx_counter++; #endif /* a frame has been received */ eth_device_ready(&(lpc_emac_device.parent)); break; case kENET_TxIntEvent: #ifdef ETH_STATISTICS isr_tx_counter++; #endif /* set event */ rt_sem_release(&lpc_emac_device.tx_wait); break; default: break; } } static void lcp_emac_io_init(void) { const uint32_t port0_pin17_config = ( IOCON_PIO_FUNC7 | /* Pin is configured as ENET_TXD1 */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT0_IDX, PIN17_IDX, port0_pin17_config); /* PORT0 PIN17 (coords: E14) is configured as ENET_TXD1 */ const uint32_t port2_pin26_config = ( IOCON_PIO_FUNC0 | /* Pin is configured as PIO2_26 */ IOCON_PIO_MODE_PULLUP | /* Selects pull-up function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT2_IDX, PIN26_IDX, port2_pin26_config); /* PORT2 PIN26 (coords: H11) is configured as PIO2_26 */ const uint32_t port4_pin10_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RX_DV */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN10_IDX, port4_pin10_config); /* PORT4 PIN10 (coords: B9) is configured as ENET_RX_DV */ const uint32_t port4_pin11_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RXD0 */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN11_IDX, port4_pin11_config); /* PORT4 PIN11 (coords: A9) is configured as ENET_RXD0 */ const uint32_t port4_pin12_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RXD1 */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN12_IDX, port4_pin12_config); /* PORT4 PIN12 (coords: A6) is configured as ENET_RXD1 */ const uint32_t port4_pin13_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_TX_EN */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN13_IDX, port4_pin13_config); /* PORT4 PIN13 (coords: B6) is configured as ENET_TX_EN */ const uint32_t port4_pin14_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_RX_CLK */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN14_IDX, port4_pin14_config); /* PORT4 PIN14 (coords: B5) is configured as ENET_RX_CLK */ const uint32_t port4_pin15_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_MDC */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN15_IDX, port4_pin15_config); /* PORT4 PIN15 (coords: A4) is configured as ENET_MDC */ const uint32_t port4_pin16_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_MDIO */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN16_IDX, port4_pin16_config); /* PORT4 PIN16 (coords: C4) is configured as ENET_MDIO */ const uint32_t port4_pin8_config = ( IOCON_PIO_FUNC1 | /* Pin is configured as ENET_TXD0 */ IOCON_PIO_MODE_INACT | /* No addition pin function */ IOCON_PIO_INV_DI | /* Input function is not inverted */ IOCON_PIO_DIGITAL_EN | /* Enables digital function */ IOCON_PIO_INPFILT_OFF | /* Input filter disabled */ IOCON_PIO_SLEW_STANDARD | /* Standard mode, output slew rate control is enabled */ IOCON_PIO_OPENDRAIN_DI /* Open drain is disabled */ ); IOCON_PinMuxSet(IOCON, PORT4_IDX, PIN8_IDX, port4_pin8_config); /* PORT4 PIN8 (coords: B14) is configured as ENET_TXD0 */ } static rt_err_t lpc_emac_phy_init(phy_speed_t * speed, phy_duplex_t * duplex) { bool link = false; int32_t status; RT_ASSERT(speed != NULL); RT_ASSERT(duplex != NULL); status = PHY_Init(lpc_emac_device.base, lpc_emac_device.phyAddr, 0); if (status != kStatus_Success) { /* Half duplex. */ *duplex = kPHY_HalfDuplex; /* 10M speed. */ *speed = kPHY_Speed10M; eth_device_linkchange(&lpc_emac_device.parent, RT_FALSE); ETH_PRINTF("PHY_Init failed!\n"); return -RT_ERROR; } /* Wait for link up and get the actual PHY link speed. */ PHY_GetLinkStatus(lpc_emac_device.base, lpc_emac_device.phyAddr, &link); while (!link) { uint32_t timedelay; ETH_PRINTF("PHY Wait for link up!\n"); for (timedelay = 0; timedelay < 0xFFFFFU; timedelay++) { __ASM("nop"); } PHY_GetLinkStatus(lpc_emac_device.base, lpc_emac_device.phyAddr, &link); } PHY_GetLinkSpeedDuplex(lpc_emac_device.base, lpc_emac_device.phyAddr, speed, duplex); eth_device_linkchange(&lpc_emac_device.parent, RT_TRUE); return RT_EOK; } static rt_err_t lpc_emac_init(rt_device_t dev) { int i; phy_speed_t speed; phy_duplex_t duplex; enet_config_t config; enet_buffer_config_t buffCfg; uint32_t rxBufferStartAddr[ENET_RXBD_NUM]; lcp_emac_io_init(); lpc_emac_phy_init(&speed, &duplex); /* calculate start addresses of all rx buffers */ for (i = 0; i < ENET_RXBD_NUM; i++) { rxBufferStartAddr[i] = ENET_ALIGN(&lpc_emac_device.RxDataBuff[i * ENET_ALIGN(ENET_RXBUFF_SIZE)]); } buffCfg.rxRingLen = ENET_RXBD_NUM; buffCfg.txRingLen = ENET_TXBD_NUM; buffCfg.txDescStartAddrAlign = get_tx_desc(0U); buffCfg.txDescTailAddrAlign = get_tx_desc(0U); buffCfg.rxDescStartAddrAlign = get_rx_desc(0U); buffCfg.rxDescTailAddrAlign = get_rx_desc(ENET_RXBD_NUM); buffCfg.rxBufferStartAddr = rxBufferStartAddr; buffCfg.rxBuffSizeAlign = ENET_ALIGN(ENET_RXBUFF_SIZE); /* Get default configuration 100M RMII. */ ENET_GetDefaultConfig(&config); /* Use the actual speed and duplex when phy success to finish the autonegotiation. */ config.miiSpeed = (enet_mii_speed_t)speed; config.miiDuplex = (enet_mii_duplex_t)duplex; ETH_PRINTF("Auto negotiation, Speed: "); if (config.miiSpeed == kENET_MiiSpeed100M) ETH_PRINTF("100M"); else ETH_PRINTF("10M"); ETH_PRINTF(", Duplex: "); if (config.miiSpeed == kENET_MiiSpeed100M) ETH_PRINTF("Full\n"); else ETH_PRINTF("Half\n"); /* Initialize lpc_emac_device.base. */ ENET_Init(lpc_emac_device.base, &config, &lpc_emac_device.dev_addr[0], CLOCK_GetFreq(kCLOCK_CoreSysClk)); /* Enable the tx/rx interrupt. */ ENET_EnableInterrupts(lpc_emac_device.base, (kENET_DmaTx | kENET_DmaRx)); ENET_CreateHandler(lpc_emac_device.base, &lpc_emac_device.handle, &config, &buffCfg, ethernet_callback, NULL); /* Initialize Descriptor. */ ENET_DescriptorInit(lpc_emac_device.base, &config, &buffCfg); /* Active TX/RX. */ ENET_StartRxTx(lpc_emac_device.base, 1, 1); return RT_EOK; } static rt_err_t lpc_emac_open(rt_device_t dev, rt_uint16_t oflag) { return RT_EOK; } static rt_err_t lpc_emac_close(rt_device_t dev) { return RT_EOK; } static rt_ssize_t lpc_emac_read(rt_device_t dev, rt_off_t pos, void *buffer, rt_size_t size) { rt_set_errno(-RT_ENOSYS); return 0; } static rt_ssize_t lpc_emac_write(rt_device_t dev, rt_off_t pos, const void *buffer, rt_size_t size) { rt_set_errno(-RT_ENOSYS); return 0; } static rt_err_t lpc_emac_control(rt_device_t dev, int cmd, void *args) { switch (cmd) { case NIOCTL_GADDR: /* get mac address */ if (args) rt_memcpy(args, lpc_emac_device.dev_addr, 6); else return -RT_ERROR; break; default : break; } return RT_EOK; } /* EtherNet Device Interface */ /* transmit packet. */ rt_err_t lpc_emac_tx(rt_device_t dev, struct pbuf *p) { rt_err_t result = RT_EOK; enet_handle_t * enet_handle = &lpc_emac_device.handle; ENET_Type *enet_base = lpc_emac_device.base; uint8_t * data; uint16_t len; RT_ASSERT(p != NULL); RT_ASSERT(enet_handle != RT_NULL); if (p->tot_len > ENET_TXBUFF_SIZE) { return -RT_ERROR; } packet_dump("TX dump", p); /* get free tx buffer */ { rt_err_t result; result = rt_sem_take(&lpc_emac_device.tx_wait, RT_TICK_PER_SECOND/10); if (result != RT_EOK) { return -RT_ERROR; } } // fix RxDataBuff -> TxDataBuff, ENET_RXBUFF_SIZE -> ENET_TXBUFF_SIZE data = (uint8_t *)ENET_ALIGN(&lpc_emac_device.TxDataBuff[lpc_emac_device.txIdx * ENET_ALIGN(ENET_TXBUFF_SIZE)]); len = pbuf_copy_partial(p, data, p->tot_len, 0); lpc_emac_device.txIdx = (lpc_emac_device.txIdx + 1) / ENET_TXBD_NUM; // fix 'p->len' to 'len', avoid send wrong partial packet. result = ENET_SendFrame(enet_base, enet_handle, data, len); if ((result == kStatus_ENET_TxFrameFail) || (result == kStatus_ENET_TxFrameOverLen) || (result == kStatus_ENET_TxFrameBusy)) { return -RT_ERROR; } return RT_EOK; } /* reception packet. */ struct pbuf *lpc_emac_rx(rt_device_t dev) { uint32_t length = 0; status_t status; struct pbuf* p = RT_NULL; enet_handle_t * enet_handle = &lpc_emac_device.handle; ENET_Type *enet_base = lpc_emac_device.base; /* Get the Frame size */ status = ENET_GetRxFrameSize(enet_base, enet_handle, &length, 0); /* Call ENET_ReadFrame when there is a received frame. */ if (length != 0) { /* Received valid frame. Deliver the rx buffer with the size equal to length. */ p = pbuf_alloc(PBUF_RAW, length, PBUF_POOL); if (p != NULL) { status = ENET_ReadFrame(enet_base, enet_handle, p->payload, length, 0); if (status == kStatus_Success) { packet_dump("RX dump", p); return p; } else { ETH_PRINTF(" A frame read failed\n"); pbuf_free(p); } } else { ETH_PRINTF(" pbuf_alloc faild\n"); } } else if (status == kStatus_ENET_RxFrameError) { ETH_PRINTF("ENET_GetRxFrameSize: kStatus_ENET_RxFrameError\n"); ENET_ReadFrame(enet_base, enet_handle, NULL, 0, 0); } return NULL; } int lpc_emac_hw_init(void) { /* init tx semaphore */ rt_sem_init(&lpc_emac_device.tx_wait, "tx_wait", ENET_TXBD_NUM, RT_IPC_FLAG_FIFO); lpc_emac_device.phyAddr = 0; lpc_emac_device.txIdx = 0; lpc_emac_device.base = ENET; // OUI 00-60-37 NXP Semiconductors lpc_emac_device.dev_addr[0] = 0x00; lpc_emac_device.dev_addr[1] = 0x60; lpc_emac_device.dev_addr[2] = 0x37; /* set mac address: (only for test) */ lpc_emac_device.dev_addr[3] = 0x12; lpc_emac_device.dev_addr[4] = 0x34; lpc_emac_device.dev_addr[5] = 0x56; lpc_emac_device.parent.parent.init = lpc_emac_init; lpc_emac_device.parent.parent.open = lpc_emac_open; lpc_emac_device.parent.parent.close = lpc_emac_close; lpc_emac_device.parent.parent.read = lpc_emac_read; lpc_emac_device.parent.parent.write = lpc_emac_write; lpc_emac_device.parent.parent.control = lpc_emac_control; lpc_emac_device.parent.parent.user_data = RT_NULL; lpc_emac_device.parent.eth_rx = lpc_emac_rx; lpc_emac_device.parent.eth_tx = lpc_emac_tx; eth_device_init(&(lpc_emac_device.parent), "e0"); return 0; } INIT_DEVICE_EXPORT(lpc_emac_hw_init); #ifdef ETH_STATISTICS int emac_stat(void) { rt_kprintf("enter rx isr coutner : %d\n", isr_rx_counter); rt_kprintf("enter tx isr coutner : %d\n", isr_tx_counter); return 0; } #endif void phy_dump(void) { status_t PHY_Read(ENET_Type *base, uint32_t phyAddr, uint32_t phyReg, uint32_t *dataPtr); int i; for (i = 0; i < 31; i++) { status_t result = kStatus_Success; uint32_t reg; result = PHY_Read(lpc_emac_device.base, lpc_emac_device.phyAddr, i, ®); if (result == kStatus_Success) { rt_kprintf("%02d: %08d\n", i, reg); } else { rt_kprintf("read register %d faild\n", i); } } } void emac_dump(void) { #define DUMP_REG(__NAME) \ rt_kprintf("%-40s, %08x: %08x\n", #__NAME, (uint32_t)&(lpc_emac_device.base->__NAME), lpc_emac_device.base->__NAME) DUMP_REG(MAC_CONFIG); DUMP_REG(MAC_EXT_CONFIG); DUMP_REG(MAC_FRAME_FILTER); DUMP_REG(MAC_WD_TIMEROUT); DUMP_REG(MAC_VLAN_TAG); DUMP_REG(MAC_TX_FLOW_CTRL_Q[0]); DUMP_REG(MAC_TX_FLOW_CTRL_Q[1]); DUMP_REG(MAC_RX_FLOW_CTRL); DUMP_REG(MAC_TXQ_PRIO_MAP); DUMP_REG(MAC_RXQ_CTRL[0]); DUMP_REG(MAC_RXQ_CTRL[1]); DUMP_REG(MAC_RXQ_CTRL[2]); DUMP_REG(MAC_INTR_STAT); DUMP_REG(MAC_INTR_EN); DUMP_REG(MAC_RXTX_STAT); DUMP_REG(MAC_PMT_CRTL_STAT); DUMP_REG(MAC_RWAKE_FRFLT); DUMP_REG(MAC_LPI_CTRL_STAT); DUMP_REG(MAC_LPI_TIMER_CTRL); DUMP_REG(MAC_LPI_ENTR_TIMR); DUMP_REG(MAC_1US_TIC_COUNTR); DUMP_REG(MAC_VERSION); DUMP_REG(MAC_DBG); DUMP_REG(MAC_HW_FEAT[0]); DUMP_REG(MAC_HW_FEAT[1]); DUMP_REG(MAC_HW_FEAT[2]); DUMP_REG(MAC_MDIO_ADDR); DUMP_REG(MAC_MDIO_DATA); DUMP_REG(MAC_ADDR_HIGH); DUMP_REG(MAC_ADDR_LOW); DUMP_REG(MAC_TIMESTAMP_CTRL); DUMP_REG(MAC_SUB_SCND_INCR); DUMP_REG(MAC_SYS_TIME_SCND); DUMP_REG(MAC_SYS_TIME_NSCND); DUMP_REG(MAC_SYS_TIME_SCND_UPD); DUMP_REG(MAC_SYS_TIME_NSCND_UPD); DUMP_REG(MAC_SYS_TIMESTMP_ADDEND); DUMP_REG(MAC_SYS_TIME_HWORD_SCND); DUMP_REG(MAC_SYS_TIMESTMP_STAT); DUMP_REG(MAC_TX_TIMESTAMP_STATUS_NANOSECONDS); DUMP_REG(MAC_TX_TIMESTAMP_STATUS_SECONDS); DUMP_REG(MAC_TIMESTAMP_INGRESS_CORR_NANOSECOND); DUMP_REG(MAC_TIMESTAMP_EGRESS_CORR_NANOSECOND); DUMP_REG(MTL_OP_MODE); DUMP_REG(MTL_INTR_STAT); DUMP_REG(MTL_RXQ_DMA_MAP); DUMP_REG(DMA_MODE); DUMP_REG(DMA_SYSBUS_MODE); DUMP_REG(DMA_INTR_STAT); DUMP_REG(DMA_DBG_STAT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_OP_MODE); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_UNDRFLW); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_DBG); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_ETS_CTRL); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_ETS_STAT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_QNTM_WGHT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_SNDSLP_CRDT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_HI_CRDT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_LO_CRDT); DUMP_REG(MTL_QUEUE[0].MTL_TXQX_INTCTRL_STAT); DUMP_REG(MTL_QUEUE[0].MTL_RXQX_OP_MODE); DUMP_REG(MTL_QUEUE[0].MTL_RXQX_MISSPKT_OVRFLW_CNT); DUMP_REG(MTL_QUEUE[0].MTL_RXQX_DBG); DUMP_REG(MTL_QUEUE[0].MTL_RXQX_CTRL); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_OP_MODE); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_UNDRFLW); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_DBG); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_ETS_CTRL); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_ETS_STAT); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_QNTM_WGHT); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_SNDSLP_CRDT); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_HI_CRDT); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_LO_CRDT); DUMP_REG(MTL_QUEUE[1].MTL_TXQX_INTCTRL_STAT); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_OP_MODE); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_MISSPKT_OVRFLW_CNT); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_DBG); DUMP_REG(MTL_QUEUE[1].MTL_RXQX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_TX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_RX_CTRL); DUMP_REG(DMA_CH[0].DMA_CHX_TXDESC_LIST_ADDR); DUMP_REG(DMA_CH[0].DMA_CHX_RXDESC_LIST_ADDR); DUMP_REG(DMA_CH[0].DMA_CHX_TXDESC_TAIL_PTR); DUMP_REG(DMA_CH[0].DMA_CHX_RXDESC_TAIL_PTR); DUMP_REG(DMA_CH[0].DMA_CHX_TXDESC_RING_LENGTH); DUMP_REG(DMA_CH[0].DMA_CHX_RXDESC_RING_LENGTH); DUMP_REG(DMA_CH[0].DMA_CHX_INT_EN); DUMP_REG(DMA_CH[0].DMA_CHX_RX_INT_WDTIMER); DUMP_REG(DMA_CH[0].DMA_CHX_SLOT_FUNC_CTRL_STAT); DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_TXDESC); DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_RXDESC); DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_TXBUF); DUMP_REG(DMA_CH[0].DMA_CHX_CUR_HST_RXBUF); DUMP_REG(DMA_CH[0].DMA_CHX_STAT); DUMP_REG(DMA_CH[1].DMA_CHX_CTRL); DUMP_REG(DMA_CH[1].DMA_CHX_TX_CTRL); DUMP_REG(DMA_CH[1].DMA_CHX_RX_CTRL); DUMP_REG(DMA_CH[1].DMA_CHX_TXDESC_LIST_ADDR); DUMP_REG(DMA_CH[1].DMA_CHX_RXDESC_LIST_ADDR); DUMP_REG(DMA_CH[1].DMA_CHX_TXDESC_TAIL_PTR); DUMP_REG(DMA_CH[1].DMA_CHX_RXDESC_TAIL_PTR); DUMP_REG(DMA_CH[1].DMA_CHX_TXDESC_RING_LENGTH); DUMP_REG(DMA_CH[1].DMA_CHX_RXDESC_RING_LENGTH); DUMP_REG(DMA_CH[1].DMA_CHX_INT_EN); DUMP_REG(DMA_CH[1].DMA_CHX_RX_INT_WDTIMER); DUMP_REG(DMA_CH[1].DMA_CHX_SLOT_FUNC_CTRL_STAT); DUMP_REG(DMA_CH[1].DMA_CHX_CUR_HST_TXDESC); DUMP_REG(DMA_CH[1].DMA_CHX_CUR_HST_RXDESC); DUMP_REG(DMA_CH[1].DMA_CHX_CUR_HST_TXBUF); DUMP_REG(DMA_CH[1].DMA_CHX_CUR_HST_RXBUF); DUMP_REG(DMA_CH[1].DMA_CHX_STAT); } void emac_bd_dump(void) { int i; rt_kprintf("rx bd dump: \n"); for (i = 0; i < ENET_RXBD_NUM; i++) { enet_rx_bd_struct_t * rx_bd = get_rx_desc(i); rt_kprintf("buf1: %p, buf2: %p, ctrl: %08x\n", rx_bd->buff1Addr, rx_bd->buff2Addr, rx_bd->control); } rt_kprintf("tx bd dump: \n"); for (i = 0; i < ENET_TXBD_NUM; i++) { enet_tx_bd_struct_t * tx_bd = get_tx_desc(i); rt_kprintf("buf1: %p, buf2: %p, len: %08x, ctrl: %08x\n", tx_bd->buff1Addr, tx_bd->buff2Addr, tx_bd->buffLen, tx_bd->controlStat); } } #ifdef RT_USING_FINSH #include FINSH_FUNCTION_EXPORT(emac_stat, dump emac stat data); FINSH_FUNCTION_EXPORT(phy_dump, dump phy registers); FINSH_FUNCTION_EXPORT(emac_dump, dump emac registers); FINSH_FUNCTION_EXPORT(emac_bd_dump, dump emac tx and rx descriptor); #endif