from building import *

cwd = GetCurrentDir()

objs = []

# add the general drivers.
src = Split('''
board.c
''')

# add gpio code
if GetDepend('RT_USING_PIN'):
    src += ['drv_gpio.c']

# add serial driver code
if  GetDepend('BSP_USING_UART0') or GetDepend('BSP_USING_UART1') or GetDepend('BSP_USING_UART2') or GetDepend('BSP_USING_UART3') or \
    GetDepend('BSP_USING_UART4') or GetDepend('BSP_USING_UART5') or \
    GetDepend('BSP_USING_USART0') or GetDepend('BSP_USING_USART1') or GetDepend('BSP_USING_USART2') or GetDepend('BSP_USING_USART3') or \
    GetDepend('BSP_USING_USART4') or GetDepend('BSP_USING_USART5') or \
    GetDepend('RT_USING_SERIAL'):
    src += ['drv_uart.c']

# add spi driver code
if  GetDepend('BSP_USING_SPI0') or GetDepend('BSP_USING_SPI1'):
    src += ['drv_spi.c']

# add i2c driver code
if  GetDepend('BSP_USING_I2C0') or GetDepend('BSP_USING_I2C1'):
    src += ['drv_i2c.c']

# add can driver code
if  GetDepend('BSP_USING_CAN') or GetDepend('BSP_USING_CAN0') or GetDepend('RT_USING_CAN'):
    src += ['drv_can.c']


# add adc driver code
if GetDepend(['BSP_USING_ADC0']) or GetDepend('BSP_USING_ADC'):
    src += ['drv_adc.c']

# add rtc driver code
if GetDepend(['BSP_USING_RTC']):
    src += ['drv_rtc.c']

# add spi flash driver code
if GetDepend('BSP_USING_SPI_FLASH'):
    src += ['drv_spiflash.c']

# add hwtimer driver code
if GetDepend('BSP_USING_AD16C4T0_HWTIMER') or GetDepend('BSP_USING_AD16C4T1_HWTIMER') or \
    GetDepend('BSP_USING_GP32C4T0_HWTIMER') or GetDepend('BSP_USING_GP32C4T1_HWTIMER') or \
    GetDepend('BSP_USING_GP16C4T0_HWTIMER') or GetDepend('BSP_USING_GP16C4T1_HWTIMER') or GetDepend('BSP_USING_GP16C4T2_HWTIMER') or \
    GetDepend('BSP_USING_GP16C2T0_HWTIMER') or GetDepend('BSP_USING_GP16C2T1_HWTIMER') or \
    GetDepend('BSP_USING_GP16C4T0_HWTIMER') or GetDepend('BSP_USING_GP16C4T1_HWTIMER') or \
    GetDepend('BSP_USING_BS16T0_HWTIMER') or GetDepend('BSP_USING_BS16T1_HWTIMERIMER') or \
    GetDepend('BSP_USING_BS16T2_HWTIMER') or GetDepend('BSP_USING_BS16T3_HWTIMER'):
    src += ['drv_hwtimer.c']

# add pwm driver code
if GetDepend('BSP_USING_AD16C4T0_PWM') or GetDepend('BSP_USING_AD16C4T1_PWM') or \
    GetDepend('BSP_USING_GP16C4T0_PWM') or GetDepend('BSP_USING_GP16C4T1_PWM') or GetDepend('BSP_USING_GP16C4T2_PWM') or  \
    GetDepend('BSP_USING_GP16C2T0__PWM') or GetDepend('BSP_USING_GP16C2T1_PWM') or \
    GetDepend('BSP_USING_GP32C4T0_PWM') or GetDepend('BSP_USING_GP32C4T1_PWM') or \
    GetDepend('BSP_USING_GP16C4T0_PWM') or GetDepend('BSP_USING_GP16C4T1_PWM'):
    src += ['drv_pwm.c']

# add pm driver code
if GetDepend(['BSP_USING_PM']):
    src += ['drv_pm.c']
CPPPATH = [cwd]
CPPPATH = CPPPATH + [cwd + '/ES']
#__SYS_SELECT_H__ 用来规避冲突
#cdkrepo\toolchain\xtgccelfnewlib\v2.6.1\r\riscv64-unknown-elf\include\sys\select.h
#components/libc/compilers/common/include/sys/select.h
CPPDEFINES = ['__SYS_SELECT_H__','__RT_ATOMIC_H__']
CCFLAGS='-fno-exceptions'
#LINKFLAGS='-lstdc++'
LIBS=['stdc++']
group = DefineGroup('Drivers', src, depend = [''], CPPPATH = CPPPATH, CPPDEFINES = CPPDEFINES,CCFLAGS=CCFLAGS,LIBS=LIBS)
objs = objs + group

Return('objs')