/*
 * Copyright (c) 2015 - 2016, Freescale Semiconductor, Inc.
 * Copyright 2016 - 2017 NXP
 *
 * Redistribution and use in source and binary forms, with or without modification,
 * are permitted provided that the following conditions are met:
 *
 * o Redistributions of source code must retain the above copyright notice, this list
 *   of conditions and the following disclaimer.
 *
 * o Redistributions in binary form must reproduce the above copyright notice, this
 *   list of conditions and the following disclaimer in the documentation and/or
 *   other materials provided with the distribution.
 *
 * o Neither the name of the copyright holder nor the names of its
 *   contributors may be used to endorse or promote products derived from this
 *   software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR
 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <usb/include/usb_device_config.h>
#include <usb/include/usb.h>

#include "usb_device.h"
#include "usb_device_dci.h"

#include "fsl_device_registers.h"

#if ((defined(USB_DEVICE_CONFIG_NUM)) && (USB_DEVICE_CONFIG_NUM > 0U))

#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
#include "usb_device_khci.h"
#endif

#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
#include "usb_device_ehci.h"
#endif

#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
     ((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
#include "usb_device_lpcip3511.h"
#endif

#if (defined(USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE) && (USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE > 0U))
#include "fsl_cache.h"
#endif
/*******************************************************************************
 * Definitions
 ******************************************************************************/

/*******************************************************************************
 * Prototypes
 ******************************************************************************/
static usb_status_t USB_DeviceAllocateHandle(uint8_t controllerId, usb_device_struct_t **handle);
static usb_status_t USB_DeviceFreeHandle(usb_device_struct_t *handle);
static usb_status_t USB_DeviceGetControllerInterface(
    uint8_t controllerId, const usb_device_controller_interface_struct_t **controllerInterface);
static usb_status_t USB_DeviceTransfer(usb_device_handle handle,
                                       uint8_t endpointAddress,
                                       uint8_t *buffer,
                                       uint32_t length);
static usb_status_t USB_DeviceControl(usb_device_handle handle, usb_device_control_type_t type, void *param);
static usb_status_t USB_DeviceResetNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);
#if (defined(USB_DEVICE_CONFIG_LOW_POWER_MODE) && (USB_DEVICE_CONFIG_LOW_POWER_MODE > 0U))
static usb_status_t USB_DeviceSuspendNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);
static usb_status_t USB_DeviceResumeNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);
#if (defined(USB_DEVICE_CONFIG_LPM_L1) && (USB_DEVICE_CONFIG_LPM_L1 > 0U))
static usb_status_t USB_DeviceSleepNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);

#endif
#endif /* USB_DEVICE_CONFIG_LOW_POWER_MODE */
#if (defined(USB_DEVICE_CONFIG_DETACH_ENABLE) && (USB_DEVICE_CONFIG_DETACH_ENABLE > 0U))
static usb_status_t USB_DeviceDetachNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);
static usb_status_t USB_DeviceAttachNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message);
#endif
static usb_status_t USB_DeviceNotification(usb_device_struct_t *handle, usb_device_callback_message_struct_t *message);

/*******************************************************************************
 * Variables
 ******************************************************************************/

USB_GLOBAL static usb_device_struct_t s_UsbDevice[USB_DEVICE_CONFIG_NUM];

/*******************************************************************************
 * Code
 ******************************************************************************/

/*!
 * @brief Allocate a device handle.
 *
 * This function allocates a device handle.
 *
 * @param controllerId   The controller id of the USB IP. Please refer to the enumeration usb_controller_index_t.
 * @param handle          It is out parameter, is used to return pointer of the device handle to the caller.
 *
 * @retval kStatus_USB_Success              Get a device handle successfully.
 * @retval kStatus_USB_Busy                 Cannot allocate a device handle.
 * @retval kStatus_USB_Error                The device has been initialized.
 */
static usb_status_t USB_DeviceAllocateHandle(uint8_t controllerId, usb_device_struct_t **handle)
{
    uint32_t count;
    USB_OSA_SR_ALLOC();

    USB_OSA_ENTER_CRITICAL();
    /* Check the controller is initialized or not. */
    for (count = 0U; count < USB_DEVICE_CONFIG_NUM; count++)
    {
        if ((NULL != s_UsbDevice[count].controllerHandle) && (controllerId == s_UsbDevice[count].controllerId))
        {
            USB_OSA_EXIT_CRITICAL();
            return kStatus_USB_Error;
        }
    }
    /* Get a free device handle. */
    for (count = 0U; count < USB_DEVICE_CONFIG_NUM; count++)
    {
        if (NULL == s_UsbDevice[count].controllerHandle)
        {
            s_UsbDevice[count].controllerId = controllerId;
            *handle = &s_UsbDevice[count];
            USB_OSA_EXIT_CRITICAL();
            return kStatus_USB_Success;
        }
    }
    USB_OSA_EXIT_CRITICAL();
    return kStatus_USB_Busy;
}

/*!
 * @brief Free a device handle.
 *
 * This function frees a device handle.
 *
 * @param handle          The device handle.
 *
 * @retval kStatus_USB_Success              Free device handle successfully.
 */
static usb_status_t USB_DeviceFreeHandle(usb_device_struct_t *handle)
{
    USB_OSA_SR_ALLOC();

    USB_OSA_ENTER_CRITICAL();
    handle->controllerHandle = NULL;
    handle->controllerId = 0U;
    USB_OSA_EXIT_CRITICAL();
    return kStatus_USB_Success;
}

#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
/* KHCI device driver interface */
static const usb_device_controller_interface_struct_t s_UsbDeviceKhciInterface = {
    USB_DeviceKhciInit, USB_DeviceKhciDeinit, USB_DeviceKhciSend,
    USB_DeviceKhciRecv, USB_DeviceKhciCancel, USB_DeviceKhciControl
};
#endif

#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
/* EHCI device driver interface */
static const usb_device_controller_interface_struct_t s_UsbDeviceEhciInterface = {
    USB_DeviceEhciInit, USB_DeviceEhciDeinit, USB_DeviceEhciSend,
    USB_DeviceEhciRecv, USB_DeviceEhciCancel, USB_DeviceEhciControl
};
#endif

#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
     ((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
/* EHCI device driver interface */
static const usb_device_controller_interface_struct_t s_UsbDeviceLpc3511IpInterface = {
    USB_DeviceLpc3511IpInit, USB_DeviceLpc3511IpDeinit, USB_DeviceLpc3511IpSend,
    USB_DeviceLpc3511IpRecv, USB_DeviceLpc3511IpCancel, USB_DeviceLpc3511IpControl
};
#endif

/*!
 * @brief Get the controller interface handle.
 *
 * This function is used to get the controller interface handle.
 *
 * @param controllerId          The controller id of the USB IP. Please refer to the enumeration usb_controller_index_t.
 * @param controllerInterface   It is out parameter, is used to return pointer of the device controller handle to the
 * caller.
 *
 * @retval kStatus_USB_Success              Get a device handle successfully.
 * @retval kStatus_USB_ControllerNotFound   The controller id is invalided.
 */
static usb_status_t USB_DeviceGetControllerInterface(
    uint8_t controllerId, const usb_device_controller_interface_struct_t **controllerInterface)
{
    usb_status_t error = kStatus_USB_ControllerNotFound;
    switch (controllerId)
    {
#if ((defined(USB_DEVICE_CONFIG_KHCI)) && (USB_DEVICE_CONFIG_KHCI > 0U))
    /* Get the KHCI controller driver interface */
    case kUSB_ControllerKhci0:
    case kUSB_ControllerKhci1:
        *controllerInterface = (const usb_device_controller_interface_struct_t *)&s_UsbDeviceKhciInterface;
        error = kStatus_USB_Success;
        break;
#endif
#if ((defined(USB_DEVICE_CONFIG_EHCI)) && (USB_DEVICE_CONFIG_EHCI > 0U))
    /* Get the EHCI controller driver interface */
    case kUSB_ControllerEhci0:
    case kUSB_ControllerEhci1:
        error = kStatus_USB_Success;
        *controllerInterface = (const usb_device_controller_interface_struct_t *)&s_UsbDeviceEhciInterface;
        break;
#endif
#if (((defined(USB_DEVICE_CONFIG_LPCIP3511FS)) && (USB_DEVICE_CONFIG_LPCIP3511FS > 0U)) || \
     ((defined(USB_DEVICE_CONFIG_LPCIP3511HS)) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U)))
    /* Get the EHCI controller driver interface */
    case kUSB_ControllerLpcIp3511Fs0:
    case kUSB_ControllerLpcIp3511Fs1:
    case kUSB_ControllerLpcIp3511Hs0:
    case kUSB_ControllerLpcIp3511Hs1:
        error = kStatus_USB_Success;
        *controllerInterface = (const usb_device_controller_interface_struct_t *)&s_UsbDeviceLpc3511IpInterface;
        break;
#endif
    default:
        break;
    }
    return error;
}

/*!
 * @brief Start a new transfer.
 *
 * This function is used to start a new transfer.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param endpointAddress       Endpoint address. Bit7 is direction, 0U - USB_OUT, 1U - USB_IN.
 * @param buffer                 The memory address to be transferred, or the memory address to hold the data need to be
 * sent.
 * @param length                 The length of the data.
 *
 * @retval kStatus_USB_Success              Get a device handle successfully.
 * @retval kStatus_USB_InvalidHandle        The device handle is invalided.
 * @retval kStatus_USB_ControllerNotFound   The controller interface is not found.
 * @retval kStatus_USB_Error                The device is doing reset.
 */
static usb_status_t USB_DeviceTransfer(usb_device_handle handle,
                                       uint8_t endpointAddress,
                                       uint8_t *buffer,
                                       uint32_t length)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    usb_status_t error = kStatus_USB_Error;
    uint8_t endpoint = endpointAddress & USB_ENDPOINT_NUMBER_MASK;
    uint8_t direction = (endpointAddress & USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_MASK) >>
                        USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT;
    USB_OSA_SR_ALLOC();

    if (NULL == deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }

    if (NULL != deviceHandle->controllerInterface)
    {
        if (deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy)
        {
            return kStatus_USB_Busy;
        }
        USB_OSA_ENTER_CRITICAL();
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy = 1U;
        USB_OSA_EXIT_CRITICAL();
        if (endpointAddress & USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_MASK)
        {
#if (defined(USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE) && (USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE > 0U))
            if (length)
            {
                DCACHE_CleanByRange((uint32_t)buffer, length);
            }
#endif
            /* Call the controller send interface. */
            error = deviceHandle->controllerInterface->deviceSend(deviceHandle->controllerHandle, endpointAddress,
                    buffer, length);
        }
        else
        {
#if (defined(USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE) && (USB_DEVICE_CONFIG_BUFFER_PROPERTY_CACHEABLE > 0U))
            if (length)
            {
                DCACHE_CleanInvalidateByRange((uint32_t)buffer, length);
            }
#endif
            /* Call the controller receive interface. */
            error = deviceHandle->controllerInterface->deviceRecv(deviceHandle->controllerHandle, endpointAddress,
                    buffer, length);
        }
        if (kStatus_USB_Success != error)
        {
            USB_OSA_ENTER_CRITICAL();
            deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy = 0U;
            USB_OSA_EXIT_CRITICAL();
        }
    }
    else
    {
        error = kStatus_USB_ControllerNotFound;
    }
    return error;
}

/*!
 * @brief Control the status of the selected item.
 *
 * This function is used to control the status of the selected item..
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param type                   The control type, please refer to the enumeration usb_device_control_type_t.
 * @param param                  The param type is determined by the selected item.
 *
 * @retval kStatus_USB_Success              Get a device handle successfully.
 * @retval kStatus_USB_InvalidHandle        The device handle is invalided.
 * @retval kStatus_USB_ControllerNotFound   The controller interface is not found.
 * @retval kStatus_USB_Error                Unsupport type.
 *                                          Or, the param is NULL pointer.
 */
static usb_status_t USB_DeviceControl(usb_device_handle handle, usb_device_control_type_t type, void *param)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    usb_status_t error = kStatus_USB_Error;

    if (NULL == deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }

    if (NULL != deviceHandle->controllerInterface)
    {
        /* Call the controller control interface. */
        error = deviceHandle->controllerInterface->deviceControl(deviceHandle->controllerHandle, type, param);
    }
    else
    {
        error = kStatus_USB_ControllerNotFound;
    }
    return error;
}

/*!
 * @brief Handle the reset notification.
 *
 * This function is used to handle the reset notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @retval kStatus_USB_Success              Get a device handle successfully.
 */
static usb_status_t USB_DeviceResetNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_SR_ALLOC();
#endif

    handle->isResetting = 1U;

#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
    /* Clear remote wakeup feature */
    handle->remotewakeup = 0U;
#endif

#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_ENTER_CRITICAL();
    handle->epCallbackDirectly = 1;
    USB_OSA_EXIT_CRITICAL();
#endif
    /* Set the controller to default status. */
    USB_DeviceControl(handle, kUSB_DeviceControlSetDefaultStatus, NULL);
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_ENTER_CRITICAL();
    handle->epCallbackDirectly = 0;
    USB_OSA_EXIT_CRITICAL();
#endif

    handle->state = kUSB_DeviceStateDefault;
    handle->deviceAddress = 0U;

    for (uint32_t count = 0U; count < (USB_DEVICE_CONFIG_ENDPOINTS * 2U); count++)
    {
        handle->epCallback[count].callbackFn = (usb_device_endpoint_callback_t)NULL;
        handle->epCallback[count].callbackParam = NULL;
        handle->epCallback[count].isBusy = 0U;
    }

    /* Call device callback to notify the application that the USB bus reset signal detected. */
    handle->deviceCallback(handle, kUSB_DeviceEventBusReset, NULL);

    handle->isResetting = 0U;
    return kStatus_USB_Success;
}

#if (defined(USB_DEVICE_CONFIG_LOW_POWER_MODE) && (USB_DEVICE_CONFIG_LOW_POWER_MODE > 0U))
/*!
 * @brief Handle the suspend notification.
 *
 * This function is used to handle the suspend notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceSuspendNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the USB bus suspend signal detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventSuspend, NULL);
}

/*!
 * @brief Handle the resume notification.
 *
 * This function is used to handle the resume notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceResumeNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the USB bus resume signal detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventResume, NULL);
}
#if (defined(USB_DEVICE_CONFIG_LPM_L1) && (USB_DEVICE_CONFIG_LPM_L1 > 0U))
/*!
 * @brief Handle the suspend notification.
 *
 * This function is used to handle the suspend notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceSleepNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the USB bus suspend signal detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventSleeped, NULL);
}
#endif
/*!
 * @brief Handle the remotewakeup notification.
 *
 * This function is used to handle the remotewakeup notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param flag                   The buffer pointer to store remotewakeup flag.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
usb_status_t USB_DeviceGetRemoteWakeUp(usb_device_struct_t *handle, uint8_t **flag)
{
    /* Call device callback to notify the application that the USB bus suspend signal detected. */
    return USB_DeviceControl(handle, kUSB_DeviceControlGetRemoteWakeUp, flag);
}

#endif /* USB_DEVICE_CONFIG_LOW_POWER_MODE */

#if (defined(USB_DEVICE_CONFIG_ERROR_HANDLING) && (USB_DEVICE_CONFIG_ERROR_HANDLING > 0U))
usb_status_t USB_DeviceErrorNotification(usb_device_struct_t *handle, usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the USB bus error signal detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventError, NULL);
}
#endif /* USB_DEVICE_CONFIG_ERROR_HANDLING */

#if (defined(USB_DEVICE_CONFIG_DETACH_ENABLE) && (USB_DEVICE_CONFIG_DETACH_ENABLE > 0U))
/*!
 * @brief Handle the detach notification.
 *
 * This function is used to handle the detach notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDetachNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the device is disconnected from a host. */
    return handle->deviceCallback(handle, kUSB_DeviceEventDetach, NULL);
}

/*!
 * @brief Handle the attach notification.
 *
 * This function is used to handle the attach notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceAttachNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the device is connected to a host. */
    return handle->deviceCallback(handle, kUSB_DeviceEventAttach, NULL);
}
#endif

#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) && \
    ((defined(FSL_FEATURE_SOC_USBDCD_COUNT) && (FSL_FEATURE_SOC_USBDCD_COUNT > 0U)) ||        \
     (defined(FSL_FEATURE_SOC_USBHSDCD_COUNT) && (FSL_FEATURE_SOC_USBHSDCD_COUNT > 0U)))
/*!
 * @brief Handle the dcd module timeout notification.
 *
 * This function is used to handle the dcd module timeout notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDcdTimeOutNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the device charger detect timeout happened. */
    return handle->deviceCallback(handle, kUSB_DeviceEventDcdTimeOut, NULL);
}

/*!
 * @brief Handle the dcd module unknown port type notification.
 *
 * This function is used to handle the dcd module unknown port type notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDcdUnknownPortTypeNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the device charger detect unknown port type happened. */
    return handle->deviceCallback(handle, kUSB_DeviceEventDcdUnknownType, NULL);
}

/*!
 * @brief Handle the SDP facility is detected notification.
 *
 * This function is used to handle the SDP facility is detectednotification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDcdSDPDetectNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the SDP facility is detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventSDPDetected, NULL);
}

/*!
 * @brief Handle the charging port is detected notification.
 *
 * This function is used to handle the charging port is detectednotification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDcdChargingPortDetectNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the charing port is detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventChargingPortDetected, NULL);
}

/*!
 * @brief Handle the CDP facility is detected notification.
 *
 * This function is used to handle the CDP facility is detectednotification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceDcdChargingHostDetectNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the CDP facility is detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventChargingHostDetected, NULL);
}

/*!
 * @brief Handle the DCP facility is detected notification.
 *
 * This function is used to handle the DCP facility is detectednotification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */

static usb_status_t USB_DeviceDcdDedicatedChargerDetectNotification(usb_device_struct_t *handle,
        usb_device_callback_message_struct_t *message)
{
    /* Call device callback to notify the application that the DCP facility is detected. */
    return handle->deviceCallback(handle, kUSB_DeviceEventDedicatedChargerDetected, NULL);
}
#endif

/*!
 * @brief Handle the attach notification.
 *
 * This function is used to handle the attach notification.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
static usb_status_t USB_DeviceNotification(usb_device_struct_t *handle, usb_device_callback_message_struct_t *message)
{
    uint8_t endpoint = message->code & USB_ENDPOINT_NUMBER_MASK;
    uint8_t direction = (message->code & USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_MASK) >>
                        USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT;
    usb_status_t error = kStatus_USB_Error;

    switch (message->code)
    {
    case kUSB_DeviceNotifyBusReset:
        error = USB_DeviceResetNotification(handle, message);
        break;
#if (defined(USB_DEVICE_CONFIG_LOW_POWER_MODE) && (USB_DEVICE_CONFIG_LOW_POWER_MODE > 0U))
    case kUSB_DeviceNotifySuspend:
        error = USB_DeviceSuspendNotification(handle, message);
        break;
    case kUSB_DeviceNotifyResume:
        error = USB_DeviceResumeNotification(handle, message);
        break;
#if (defined(USB_DEVICE_CONFIG_LPM_L1) && (USB_DEVICE_CONFIG_LPM_L1 > 0U))
    case kUSB_DeviceNotifyLPMSleep:
        error = USB_DeviceSleepNotification(handle, message);
        break;
#endif
#endif

#if (defined(USB_DEVICE_CONFIG_ERROR_HANDLING) && (USB_DEVICE_CONFIG_ERROR_HANDLING > 0U))
    case kUSB_DeviceNotifyError:
        error = USB_DeviceErrorNotification(handle, message);
        break;
#endif

#if USB_DEVICE_CONFIG_DETACH_ENABLE
    case kUSB_DeviceNotifyDetach:
        error = USB_DeviceDetachNotification(handle, message);
        break;
    case kUSB_DeviceNotifyAttach:
        error = USB_DeviceAttachNotification(handle, message);
        break;
#endif
#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) && \
    ((defined(FSL_FEATURE_SOC_USBDCD_COUNT) && (FSL_FEATURE_SOC_USBDCD_COUNT > 0U)) ||        \
     (defined(FSL_FEATURE_SOC_USBHSDCD_COUNT) && (FSL_FEATURE_SOC_USBHSDCD_COUNT > 0U)))
    case kUSB_DeviceNotifyDcdTimeOut:
        error = USB_DeviceDcdTimeOutNotification(handle, message);
        break;
    case kUSB_DeviceNotifyDcdUnknownPortType:
        error = USB_DeviceDcdUnknownPortTypeNotification(handle, message);
        break;
    case kUSB_DeviceNotifySDPDetected:
        error = USB_DeviceDcdSDPDetectNotification(handle, message);
        break;
    case kUSB_DeviceNotifyChargingPortDetected:
        error = USB_DeviceDcdChargingPortDetectNotification(handle, message);
        break;
    case kUSB_DeviceNotifyChargingHostDetected:
        error = USB_DeviceDcdChargingHostDetectNotification(handle, message);
        break;
    case kUSB_DeviceNotifyDedicatedChargerDetected:
        error = USB_DeviceDcdDedicatedChargerDetectNotification(handle, message);
        break;
#endif

    default:
        if (endpoint < USB_DEVICE_CONFIG_ENDPOINTS)
        {
            if (handle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackFn)
            {
                usb_device_endpoint_callback_message_struct_t endpointCallbackMessage;
                endpointCallbackMessage.buffer = message->buffer;
                endpointCallbackMessage.length = message->length;
                endpointCallbackMessage.isSetup = message->isSetup;
                if (message->isSetup)
                {
                    handle->epCallback[0].isBusy = 0U;
                    handle->epCallback[1].isBusy = 0U;
                }
                else
                {
                    handle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy = 0U;
                }
                /* Call endpoint callback */
                error = handle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackFn(
                            handle, &endpointCallbackMessage,
                            handle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackParam);
            }
        }
        break;
    }
    return error;
}

/*!
 * @brief Notify the device that the controller status changed.
 *
 * This function is used to notify the device that the controller status changed.
 *
 * @param handle                 The device handle. It equals the value returned from USB_DeviceInit.
 * @param message                The device callback message handle.
 *
 * @return A USB error code or kStatus_USB_Success.
 */
usb_status_t USB_DeviceNotificationTrigger(void *handle, void *msg)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    usb_device_callback_message_struct_t *message = (usb_device_callback_message_struct_t *)msg;

    if ((NULL == msg) || (NULL == handle))
    {
        return kStatus_USB_InvalidHandle;
    }

    /* The device callback is invalid or not. */
    if (!deviceHandle->deviceCallback)
    {
        return kStatus_USB_Error;
    }

#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    if (deviceHandle->epCallbackDirectly)
    {
        if ((message->code & USB_ENDPOINT_NUMBER_MASK) && (!(message->code & 0x70U)))
        {
            return USB_DeviceNotification(deviceHandle, message);
        }
    }

    /* Add the message to message queue when the device task is enabled. */
    if (kStatus_USB_OSA_Success != USB_OsaMsgqSend(deviceHandle->notificationQueue, (void *)message))
    {
        return kStatus_USB_Busy;
    }
    return kStatus_USB_Success;
#else
    /* Handle the notification by calling USB_DeviceNotification. */
    return USB_DeviceNotification(deviceHandle, message);
#endif
}

/*!
 * @brief Initialize the USB device stack.
 *
 * This function initializes the USB device module specified by the controllerId.
 *
 * @param controllerId   The controller id of the USB IP. Please refer to the enumeration usb_controller_index_t.
 * @param deviceCallback Function pointer of the device callback.
 * @param handle          It is out parameter, is used to return pointer of the device handle to the caller.
 *
 * @retval kStatus_USB_Success              The device is initialized successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer.
 * @retval kStatus_USB_Busy                 Cannot allocate a device handle.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller according to the controller id.
 * @retval kStatus_USB_InvalidControllerInterface  The controller driver interfaces is invaild, There is an empty
 * interface entity.
 * @retval kStatus_USB_Error                The macro USB_DEVICE_CONFIG_ENDPOINTS is more than IP's endpoint number.
 *                                          Or, the device has been initialized.
 *                                          Or, the message queue is created failed.
 */
usb_status_t USB_DeviceInit(uint8_t controllerId, usb_device_callback_t deviceCallback, usb_device_handle *handle)
{
    usb_device_struct_t *deviceHandle = NULL;
    usb_status_t error;
    uint32_t count;

    if (NULL == handle)
    {
        return kStatus_USB_InvalidHandle;
    }

    /* Allocate a device handle by using the controller id. */
    error = USB_DeviceAllocateHandle(controllerId, &deviceHandle);

    if (kStatus_USB_Success != error)
    {
        return error;
    }

    /* Save the device callback */
    deviceHandle->deviceCallback = deviceCallback;
    /* Save the controller id */
    deviceHandle->controllerId = controllerId;
    /* Clear the device address */
    deviceHandle->deviceAddress = 0U;
    /* Clear the device reset state */
    deviceHandle->isResetting = 0U;

    /* Initialize the enpoints */
    for (count = 0U; count < (USB_DEVICE_CONFIG_ENDPOINTS * 2U); count++)
    {
        deviceHandle->epCallback[count].callbackFn = (usb_device_endpoint_callback_t)NULL;
        deviceHandle->epCallback[count].callbackParam = NULL;
        deviceHandle->epCallback[count].isBusy = 0U;
    }

    /* Get the controller interface according to the controller id */
    error = USB_DeviceGetControllerInterface(controllerId, &deviceHandle->controllerInterface);
    if (kStatus_USB_Success != error)
    {
        USB_DeviceFreeHandle(deviceHandle);
        return error;
    }
    if (NULL == deviceHandle->controllerInterface)
    {
        USB_DeviceFreeHandle(deviceHandle);
        return kStatus_USB_ControllerNotFound;
    }
    if (((usb_device_controller_init_t)NULL == deviceHandle->controllerInterface->deviceInit) ||
            ((usb_device_controller_deinit_t)NULL == deviceHandle->controllerInterface->deviceDeinit) ||
            ((usb_device_controller_send_t)NULL == deviceHandle->controllerInterface->deviceSend) ||
            ((usb_device_controller_recv_t)NULL == deviceHandle->controllerInterface->deviceRecv) ||
            ((usb_device_controller_cancel_t)NULL == deviceHandle->controllerInterface->deviceCancel) ||
            ((usb_device_controller_control_t)NULL == deviceHandle->controllerInterface->deviceControl))
    {
        USB_DeviceFreeHandle(deviceHandle);
        return kStatus_USB_InvalidControllerInterface;
    }

#if USB_DEVICE_CONFIG_USE_TASK
    /* Create a message queue when the device handle is enabled. */
    if (kStatus_USB_OSA_Success !=
            USB_OsaMsgqCreate(&deviceHandle->notificationQueue, USB_DEVICE_CONFIG_MAX_MESSAGES,
                              (1U + (sizeof(usb_device_callback_message_struct_t) - 1U) / sizeof(uint32_t))))
    {
        USB_DeviceDeinit(deviceHandle);
        return kStatus_USB_Error;
    }
#endif

    *handle = deviceHandle;

    /* Initialize the controller */
    error = deviceHandle->controllerInterface->deviceInit(controllerId, deviceHandle, &deviceHandle->controllerHandle);
    if (kStatus_USB_Success != error)
    {
        USB_DeviceDeinit(deviceHandle);
        *handle = NULL;
        return error;
    }
    /* Set the device to deafult state */
    deviceHandle->state = kUSB_DeviceStateDefault;

    return error;
}

/*!
 * @brief Enable the device functionality.
 *
 * The function enables the device functionality, so that the device can be recognized by the host when the device
 * detects that it has been connected to a host.
 *
 * @param handle The device handle got from USB_DeviceInit.
 *
 * @retval kStatus_USB_Success              The device is run successfully.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_InvalidHandle        The device handle is a NULL pointer. Or the controller handle is invalid.
 *
 */
usb_status_t USB_DeviceRun(usb_device_handle handle)
{
    return USB_DeviceControl(handle, kUSB_DeviceControlRun, NULL);
}
/*!
 * @brief Disable the device functionality.
 *
 * The function disables the device functionality, after this function called, even the device is detached to the host,
 * and the device can't work.
 *
 * @param handle The device handle got from USB_DeviceInit.
 *
 * @retval kStatus_USB_Success              The device is stopped successfully.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_InvalidHandle        The device handle is a NULL pointer. Or the controller handle is invalid.
 */
usb_status_t USB_DeviceStop(usb_device_handle handle)
{
    return USB_DeviceControl(handle, kUSB_DeviceControlStop, NULL);
}
/*!
 * @brief De-initialize the device controller.
 *
 * The function de-initializes the device controller specified by the handle.
 *
 * @param handle The device handle got from USB_DeviceInit.
 *
 * @retval kStatus_USB_Success              The device is stopped successfully.
 * @retval kStatus_USB_InvalidHandle        The device handle is a NULL pointer. Or the controller handle is invalid.
 */
usb_status_t USB_DeviceDeinit(usb_device_handle handle)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;

    if (NULL == deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }
    /* De-initialize the controller */
    if (NULL != deviceHandle->controllerInterface)
    {
        deviceHandle->controllerInterface->deviceDeinit(deviceHandle->controllerHandle);
        deviceHandle->controllerInterface = (usb_device_controller_interface_struct_t *)NULL;
    }

#if USB_DEVICE_CONFIG_USE_TASK
    /* Destroy the message queue. */
    if (NULL != deviceHandle->notificationQueue)
    {
        USB_OsaMsgqDestroy(deviceHandle->notificationQueue);
        deviceHandle->notificationQueue = NULL;
    }
#endif

    /* Free the device handle. */
    USB_DeviceFreeHandle(deviceHandle);
    return kStatus_USB_Success;
}

/*!
 * @brief Send data through a specified endpoint.
 *
 * The function is used to send data through a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint index.
 * @param buffer The memory address to hold the data need to be sent.
 * @param length The data length need to be sent.
 *
 * @retval kStatus_USB_Success              The send request is sent successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_Busy                 Cannot allocate dtds for current tansfer in EHCI driver.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_Error                The device is doing reset.
 *
 * @note The return value just means if the sending request is successful or not; the transfer done is notified by the
 * corresponding callback function.
 * Currently, only one transfer request can be supported for one specific endpoint.
 * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application
 * should implement a queue in the application level.
 * The subsequent transfer could begin only when the previous transfer is done (get notification through the endpoint
 * callback).
 */
usb_status_t USB_DeviceSendRequest(usb_device_handle handle, uint8_t endpointAddress, uint8_t *buffer, uint32_t length)
{
    return USB_DeviceTransfer(handle, (endpointAddress & USB_ENDPOINT_NUMBER_MASK) |
                              (USB_IN << USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT),
                              buffer, length);
}

/*!
 * @brief Receive data through a specified endpoint.
 *
 * The function is used to receive data through a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint index.
 * @param buffer The memory address to save the received data.
 * @param length The data length want to be received.
 *
 * @retval kStatus_USB_Success              The receive request is sent successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_Busy                 Cannot allocate dtds for current tansfer in EHCI driver.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_Error                The device is doing reset.
 *
 * @note The return value just means if the receiving request is successful or not; the transfer done is notified by the
 * corresponding callback function.
 * Currently, only one transfer request can be supported for one specific endpoint.
 * If there is a specific requirement to support multiple transfer requests for one specific endpoint, the application
 * should implement a queue in the application level.
 * The subsequent transfer could begin only when the previous transfer is done (get notification through the endpoint
 * callback).
 */
usb_status_t USB_DeviceRecvRequest(usb_device_handle handle, uint8_t endpointAddress, uint8_t *buffer, uint32_t length)
{
    return USB_DeviceTransfer(handle, (endpointAddress & USB_ENDPOINT_NUMBER_MASK) |
                              (USB_OUT << USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT),
                              buffer, length);
}

/*!
 * @brief Cancel the pending transfer in a specified endpoint.
 *
 * The function is used to cancel the pending transfer in a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, abd 0U - OUT.
 *
 * @retval kStatus_USB_Success              The transfer is cancelled.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 */
usb_status_t USB_DeviceCancel(usb_device_handle handle, uint8_t endpointAddress)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    usb_status_t error = kStatus_USB_Error;

    if (NULL == deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }

    if (NULL != deviceHandle->controllerInterface)
    {
        error = deviceHandle->controllerInterface->deviceCancel(deviceHandle->controllerHandle, endpointAddress);
    }
    else
    {
        error = kStatus_USB_ControllerNotFound;
    }
    return error;
}

/*!
 * @brief Initialize a specified endpoint.
 *
 * The function is used to initialize a specified endpoint and the corresponding endpoint callback is also initialized.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param epInit Endpoint initizlization structure. Please refer to the structure usb_device_endpoint_init_struct_t.
 * @param epCallback Endpoint callback structure. Please refer to the structure
 * usb_device_endpoint_callback_struct_t.
 *
 * @retval kStatus_USB_Success              The endpoint is initialized successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_InvalidParameter     The epInit or epCallback is NULL pointer. Or the endpoint number is
 * more than USB_DEVICE_CONFIG_ENDPOINTS.
 * @retval kStatus_USB_Busy                 The endpoint is busy in EHCI driver.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 */
usb_status_t USB_DeviceInitEndpoint(usb_device_handle handle,
                                    usb_device_endpoint_init_struct_t *epInit,
                                    usb_device_endpoint_callback_struct_t *epCallback)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    uint8_t endpoint;
    uint8_t direction;

    if (!deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }

    if ((!epInit) || (!epCallback))
    {
        return kStatus_USB_InvalidParameter;
    }

    endpoint = epInit->endpointAddress & USB_ENDPOINT_NUMBER_MASK;
    direction = (epInit->endpointAddress & USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_MASK) >>
                USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT;

    if (endpoint < USB_DEVICE_CONFIG_ENDPOINTS)
    {
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackFn = epCallback->callbackFn;
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackParam =
            epCallback->callbackParam;
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy = 0U;
    }
    else
    {
        return kStatus_USB_InvalidParameter;
    }
    return USB_DeviceControl(handle, kUSB_DeviceControlEndpointInit, epInit);
}

/*!
 * @brief De-initizlize a specified endpoint.
 *
 * The function is used to de-initizlize a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, abd 0U - OUT.
 *
 * @retval kStatus_USB_Success              The endpoint is de-initialized successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_InvalidParameter     The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
 * @retval kStatus_USB_Busy                 The endpoint is busy in EHCI driver.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 */
usb_status_t USB_DeviceDeinitEndpoint(usb_device_handle handle, uint8_t endpointAddress)
{
    usb_device_struct_t *deviceHandle = (usb_device_struct_t *)handle;
    uint8_t endpoint = endpointAddress & USB_ENDPOINT_NUMBER_MASK;
    uint8_t direction = (endpointAddress & USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_MASK) >>
                        USB_DESCRIPTOR_ENDPOINT_ADDRESS_DIRECTION_SHIFT;
    usb_status_t error = kStatus_USB_Error;
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_SR_ALLOC();
#endif

    if (!deviceHandle)
    {
        return kStatus_USB_InvalidHandle;
    }
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_ENTER_CRITICAL();
    deviceHandle->epCallbackDirectly = 1;
    USB_OSA_EXIT_CRITICAL();
#endif
    error = USB_DeviceControl(handle, kUSB_DeviceControlEndpointDeinit, &endpointAddress);
#if (defined(USB_DEVICE_CONFIG_USE_TASK) && (USB_DEVICE_CONFIG_USE_TASK > 0U))
    USB_OSA_ENTER_CRITICAL();
    deviceHandle->epCallbackDirectly = 0;
    USB_OSA_EXIT_CRITICAL();
#endif

    if (endpoint < USB_DEVICE_CONFIG_ENDPOINTS)
    {
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackFn =
            (usb_device_endpoint_callback_t)NULL;
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].callbackParam = NULL;
        deviceHandle->epCallback[(uint8_t)((uint32_t)endpoint << 1U) | direction].isBusy = 0U;
    }
    else
    {
        return kStatus_USB_InvalidParameter;
    }
    return error;
}

/*!
 * @brief Stall a specified endpoint.
 *
 * The function is used to stall a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, abd 0U - OUT.
 *
 * @retval kStatus_USB_Success              The endpoint is stalled successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_InvalidParameter     The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 */
usb_status_t USB_DeviceStallEndpoint(usb_device_handle handle, uint8_t endpointAddress)
{
    if ((endpointAddress & USB_ENDPOINT_NUMBER_MASK) < USB_DEVICE_CONFIG_ENDPOINTS)
    {
        return USB_DeviceControl(handle, kUSB_DeviceControlEndpointStall, &endpointAddress);
    }
    else
    {
        return kStatus_USB_InvalidParameter;
    }
}

/*!
 * @brief Un-stall a specified endpoint.
 *
 * The function is used to un-stall a specified endpoint.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param endpointAddress Endpoint address, bit7 is the direction of endpoint, 1U - IN, abd 0U - OUT.
 *
 * @retval kStatus_USB_Success              The endpoint is un-stalled successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_InvalidParameter     The endpoint number is more than USB_DEVICE_CONFIG_ENDPOINTS.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 */
usb_status_t USB_DeviceUnstallEndpoint(usb_device_handle handle, uint8_t endpointAddress)
{
    if ((endpointAddress & USB_ENDPOINT_NUMBER_MASK) < USB_DEVICE_CONFIG_ENDPOINTS)
    {
        return USB_DeviceControl(handle, kUSB_DeviceControlEndpointUnstall, &endpointAddress);
    }
    else
    {
        return kStatus_USB_InvalidParameter;
    }
}

/*!
 * @brief Get the status of the selected item.
 *
 * The function is used to get the status of the selected item.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param type   The selected item. Please refer to the structure usb_device_status_t.
 * @param param  The param type is determined by the selected item.
 *
 * @retval kStatus_USB_Success              Get status successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_InvalidParameter     The param is NULL pointer.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_Error                Unsupported type.
 */
usb_status_t USB_DeviceGetStatus(usb_device_handle handle, usb_device_status_t type, void *param)
{
    uint8_t *temp8;
    usb_status_t error = kStatus_USB_Error;

    if (NULL == param)
    {
        return kStatus_USB_InvalidParameter;
    }
    switch (type)
    {
    case kUSB_DeviceStatusSpeed:
        error = USB_DeviceControl(handle, kUSB_DeviceControlGetSpeed, param);
        break;
    case kUSB_DeviceStatusOtg:
        error = USB_DeviceControl(handle, kUSB_DeviceControlGetOtgStatus, param);
        break;
    case kUSB_DeviceStatusDeviceState:
        temp8 = (uint8_t *)param;
        error = kStatus_USB_Success;
        *temp8 = ((usb_device_struct_t *)handle)->state;
        break;
    case kUSB_DeviceStatusAddress:
        temp8 = (uint8_t *)param;
        error = kStatus_USB_Success;
        *temp8 = ((usb_device_struct_t *)handle)->deviceAddress;
        break;
    case kUSB_DeviceStatusDevice:
        error = USB_DeviceControl(handle, kUSB_DeviceControlGetDeviceStatus, param);
        break;
    case kUSB_DeviceStatusEndpoint:
        error = USB_DeviceControl(handle, kUSB_DeviceControlGetEndpointStatus, param);
        break;
    case kUSB_DeviceStatusSynchFrame:
        error = USB_DeviceControl(handle, kUSB_DeviceControlGetSynchFrame, param);
        break;
#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
    case kUSB_DeviceStatusRemoteWakeup:
        temp8 = (uint8_t *)param;
        error = kStatus_USB_Success;
        *temp8 = ((usb_device_struct_t *)handle)->remotewakeup;
        break;
#endif
    default:
        break;
    }
    return error;
}

/*!
 * @brief Set the status of the selected item.
 *
 * The function is used to set the status of the selected item.
 *
 * @param handle The device handle got from USB_DeviceInit.
 * @param type The selected item. Please refer to the structure usb_device_status_t.
 * @param param The param type is determined by the selected item.
 *
 * @retval kStatus_USB_Success              Set status successfully.
 * @retval kStatus_USB_InvalidHandle        The handle is a NULL pointer. Or the controller handle is invalid.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_Error                Unsupported type, or the param is NULL pointer.
 */
usb_status_t USB_DeviceSetStatus(usb_device_handle handle, usb_device_status_t type, void *param)
{
    usb_status_t error = kStatus_USB_Error;
    switch (type)
    {
#if (defined(USB_DEVICE_CONFIG_EHCI) && (USB_DEVICE_CONFIG_EHCI > 0U) ||                  \
     (defined(USB_DEVICE_CONFIG_LPCIP3511HS) && (USB_DEVICE_CONFIG_LPCIP3511HS > 0U))) && \
    (defined(USB_DEVICE_CONFIG_USB20_TEST_MODE) && (USB_DEVICE_CONFIG_USB20_TEST_MODE > 0U))
    case kUSB_DeviceStatusTestMode:
        error = USB_DeviceControl(handle, kUSB_DeviceControlSetTestMode, param);
        break;
#endif
    case kUSB_DeviceStatusOtg:
        error = USB_DeviceControl(handle, kUSB_DeviceControlSetOtgStatus, param);
        break;
    case kUSB_DeviceStatusDeviceState:
        if (NULL != param)
        {
            error = kStatus_USB_Success;
            ((usb_device_struct_t *)handle)->state = (uint8_t)(*(uint8_t *)param);
        }
        break;
    case kUSB_DeviceStatusAddress:
        if (kUSB_DeviceStateAddressing != ((usb_device_struct_t *)handle)->state)
        {
            if (NULL != param)
            {
                error = kStatus_USB_Success;
                ((usb_device_struct_t *)handle)->deviceAddress = (uint8_t)(*(uint8_t *)param);
                ((usb_device_struct_t *)handle)->state = kUSB_DeviceStateAddressing;
            }
        }
        else
        {
            error = USB_DeviceControl(handle, kUSB_DeviceControlSetDeviceAddress,
                                      &((usb_device_struct_t *)handle)->deviceAddress);
        }
        break;
    case kUSB_DeviceStatusBusResume:
        error = USB_DeviceControl(handle, kUSB_DeviceControlResume, param);
        break;
    case kUSB_DeviceStatusBusSleepResume:
        error = USB_DeviceControl(handle, kUSB_DeviceControlSleepResume, param);
        break;
#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
    case kUSB_DeviceStatusRemoteWakeup:
        if (NULL != param)
        {
            error = kStatus_USB_Success;
            ((usb_device_struct_t *)handle)->remotewakeup = (uint8_t)(*(uint8_t *)param);
        }
        break;
#endif
    case kUSB_DeviceStatusBusSuspend:
        error = USB_DeviceControl(handle, kUSB_DeviceControlSuspend, param);
        break;
    case kUSB_DeviceStatusBusSleep:
        error = USB_DeviceControl(handle, kUSB_DeviceControlSleep, param);
        break;
    default:
        break;
    }
    return error;
}

#if (defined(USB_DEVICE_CHARGER_DETECT_ENABLE) && (USB_DEVICE_CHARGER_DETECT_ENABLE > 0U)) && \
    ((defined(FSL_FEATURE_SOC_USBDCD_COUNT) && (FSL_FEATURE_SOC_USBDCD_COUNT > 0U)) ||        \
     (defined(FSL_FEATURE_SOC_USBHSDCD_COUNT) && (FSL_FEATURE_SOC_USBHSDCD_COUNT > 0U)))
/*!
 * @brief Initializes the device dcd module.
 *
 * The function initializes the device dcd module.
 *
 * @param handle The device handle got from USB_DeviceInit.
 *
 * @retval kStatus_USB_Success              The device is run successfully.
 * @retval kStatus_USB_ControllerNotFound   Cannot find the controller.
 * @retval kStatus_USB_InvalidHandle        The device handle is a NULL pointer. Or the controller handle is invalid.
 *
 */
usb_status_t USB_DeviceDcdInitModule(usb_device_handle handle, void *time_param)
{
    return USB_DeviceControl(handle, kUSB_DeviceControlDcdInitModule, time_param);
}

/*!
 * @brief De-initializes the device dcd module.
 *
 * The function de-intializes the device dcd module.
 *
 * @param handle The device handle got from USB_DeviceInit.
 *
 * @retval kStatus_USB_Success              The device is run successfully.
 * @retval kStatus_USB_InvalidHandle        The device handle is a NULL pointer. Or the controller handle is invalid.
 *
 */
usb_status_t USB_DeviceDcdDeinitModule(usb_device_handle handle)
{
    return USB_DeviceControl(handle, kUSB_DeviceControlDcdDeinitModule, NULL);
}
#endif

#if USB_DEVICE_CONFIG_USE_TASK
/*!
 * @brief Device task function.
 *
 * The function is used to handle controller message.
 * This function should not be called in applicartion directly.
 *
 * @param handle The device handle got from USB_DeviceInit.
 */
void USB_DeviceTaskFunction(void *deviceHandle)
{
    usb_device_struct_t *handle = (usb_device_struct_t *)deviceHandle;
    static usb_device_callback_message_struct_t message;

    if (deviceHandle)
    {
        /* Get the message from the queue */
        if (kStatus_USB_OSA_Success == USB_OsaMsgqRecv(handle->notificationQueue, (uint32_t *)&message, 0U))
        {
            /* Handle the message */
            USB_DeviceNotification(handle, &message);
        }
    }
}
#endif

/*!
 * @brief Get dvice stack version function.
 *
 * The function is used to get dvice stack version.
 *
 * @param[out] version The version structure pointer to keep the device stack version.
 *
 */
void USB_DeviceGetVersion(uint32_t *version)
{
    if (version)
    {
        *version =
            (uint32_t)USB_MAKE_VERSION(USB_STACK_VERSION_MAJOR, USB_STACK_VERSION_MINOR, USB_STACK_VERSION_BUGFIX);
    }
}

#if ((defined(USB_DEVICE_CONFIG_REMOTE_WAKEUP)) && (USB_DEVICE_CONFIG_REMOTE_WAKEUP > 0U))
/*!
 * @brief Update the hardware tick.
 *
 * The function is used to update the hardware tick.
 *
 * @param[in] handle The device handle got from #USB_DeviceInit.
 * @param[in] tick Current hardware tick.
 *
 */
usb_status_t USB_DeviceUpdateHwTick(usb_device_handle handle, uint64_t tick)
{
    usb_device_struct_t *deviceHandle;
    usb_status_t status = kStatus_USB_Success;

    if (handle == NULL)
    {
        return kStatus_USB_InvalidHandle;
    }
    deviceHandle = (usb_device_struct_t *)handle;

    deviceHandle->hwTick = tick;

    return status;
}
#endif
#endif /* USB_DEVICE_CONFIG_NUM */