/* * The Clear BSD License * Copyright 2017 NXP * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted (subject to the limitations in the disclaimer below) provided * that the following conditions are met: * * o Redistributions of source code must retain the above copyright notice, this list * of conditions and the following disclaimer. * * o Redistributions in binary form must reproduce the above copyright notice, this * list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * o Neither the name of the copyright holder nor the names of its * contributors may be used to endorse or promote products derived from this * software without specific prior written permission. * * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS LICENSE. * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "fsl_clock.h" /* Component ID definition, used by tools. */ #ifndef FSL_COMPONENT_ID #define FSL_COMPONENT_ID "platform.drivers.clock" #endif /******************************************************************************* * Variables ******************************************************************************/ /* External XTAL (OSC) clock frequency. */ uint32_t g_xtalFreq; /* External RTC XTAL clock frequency. */ uint32_t g_rtcXtalFreq; /******************************************************************************* * Prototypes ******************************************************************************/ /*! * @brief Get the periph clock frequency. * * @return Periph clock frequency in Hz. */ static uint32_t CLOCK_GetPeriphClkFreq(void); /******************************************************************************* * Code ******************************************************************************/ static uint32_t CLOCK_GetPeriphClkFreq(void) { uint32_t freq; /* Periph_clk2_clk ---> Periph_clk */ if (CCM->CBCDR & CCM_CBCDR_PERIPH_CLK_SEL_MASK) { switch (CCM->CBCMR & CCM_CBCMR_PERIPH_CLK2_SEL_MASK) { /* Pll3_sw_clk ---> Periph_clk2_clk ---> Periph_clk */ case CCM_CBCMR_PERIPH_CLK2_SEL(0U): freq = CLOCK_GetPllFreq(kCLOCK_PllUsb1); break; /* Osc_clk ---> Periph_clk2_clk ---> Periph_clk */ case CCM_CBCMR_PERIPH_CLK2_SEL(1U): freq = CLOCK_GetOscFreq(); break; case CCM_CBCMR_PERIPH_CLK2_SEL(2U): freq = CLOCK_GetPllFreq(kCLOCK_PllSys); break; case CCM_CBCMR_PERIPH_CLK2_SEL(3U): default: freq = 0U; break; } freq /= (((CCM->CBCDR & CCM_CBCDR_PERIPH_CLK2_PODF_MASK) >> CCM_CBCDR_PERIPH_CLK2_PODF_SHIFT) + 1U); } /* Pre_Periph_clk ---> Periph_clk */ else { switch (CCM->CBCMR & CCM_CBCMR_PRE_PERIPH_CLK_SEL_MASK) { /* PLL2 ---> Pre_Periph_clk ---> Periph_clk */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(0U): freq = CLOCK_GetPllFreq(kCLOCK_PllSys); break; /* PLL2 PFD2 ---> Pre_Periph_clk ---> Periph_clk */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(1U): freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd2); break; /* PLL2 PFD0 ---> Pre_Periph_clk ---> Periph_clk */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(2U): freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd0); break; /* PLL1 divided(/2) ---> Pre_Periph_clk ---> Periph_clk */ case CCM_CBCMR_PRE_PERIPH_CLK_SEL(3U): freq = CLOCK_GetPllFreq(kCLOCK_PllArm) / (((CCM->CACRR & CCM_CACRR_ARM_PODF_MASK) >> CCM_CACRR_ARM_PODF_SHIFT) + 1U); break; default: freq = 0U; break; } } return freq; } void CLOCK_InitExternalClk(bool bypassXtalOsc) { /* This device does not support bypass XTAL OSC. */ assert(!bypassXtalOsc); CCM_ANALOG->MISC0_CLR = CCM_ANALOG_MISC0_XTAL_24M_PWD_MASK; /* Power up */ while ((XTALOSC24M->LOWPWR_CTRL & XTALOSC24M_LOWPWR_CTRL_XTALOSC_PWRUP_STAT_MASK) == 0) { } CCM_ANALOG->MISC0_SET = CCM_ANALOG_MISC0_OSC_XTALOK_EN_MASK; /* detect freq */ while ((CCM_ANALOG->MISC0 & CCM_ANALOG_MISC0_OSC_XTALOK_MASK) == 0) { } CCM_ANALOG->MISC0_CLR = CCM_ANALOG_MISC0_OSC_XTALOK_EN_MASK; } void CLOCK_DeinitExternalClk(void) { CCM_ANALOG->MISC0_SET = CCM_ANALOG_MISC0_XTAL_24M_PWD_MASK; /* Power down */ } void CLOCK_SwitchOsc(clock_osc_t osc) { if (osc == kCLOCK_RcOsc) XTALOSC24M->LOWPWR_CTRL_SET = XTALOSC24M_LOWPWR_CTRL_SET_OSC_SEL_MASK; else XTALOSC24M->LOWPWR_CTRL_CLR = XTALOSC24M_LOWPWR_CTRL_CLR_OSC_SEL_MASK; } void CLOCK_InitRcOsc24M(void) { XTALOSC24M->LOWPWR_CTRL |= XTALOSC24M_LOWPWR_CTRL_RC_OSC_EN_MASK; } void CLOCK_DeinitRcOsc24M(void) { XTALOSC24M->LOWPWR_CTRL &= ~XTALOSC24M_LOWPWR_CTRL_RC_OSC_EN_MASK; } uint32_t CLOCK_GetFreq(clock_name_t name) { uint32_t freq; switch (name) { case kCLOCK_CpuClk: /* Periph_clk ---> AHB Clock */ case kCLOCK_AhbClk: /* Periph_clk ---> AHB Clock */ freq = CLOCK_GetPeriphClkFreq() / (((CCM->CBCDR & CCM_CBCDR_AHB_PODF_MASK) >> CCM_CBCDR_AHB_PODF_SHIFT) + 1U); break; case kCLOCK_SemcClk: /* SEMC alternative clock ---> SEMC Clock */ if (CCM->CBCDR & CCM_CBCDR_SEMC_CLK_SEL_MASK) { /* PLL3 PFD1 ---> SEMC alternative clock ---> SEMC Clock */ if (CCM->CBCDR & CCM_CBCDR_SEMC_ALT_CLK_SEL_MASK) { freq = CLOCK_GetUsb1PfdFreq(kCLOCK_Pfd1); } /* PLL2 PFD2 ---> SEMC alternative clock ---> SEMC Clock */ else { freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd2); } } /* Periph_clk ---> SEMC Clock */ else { freq = CLOCK_GetPeriphClkFreq(); } freq /= (((CCM->CBCDR & CCM_CBCDR_SEMC_PODF_MASK) >> CCM_CBCDR_SEMC_PODF_SHIFT) + 1U); break; case kCLOCK_IpgClk: /* Periph_clk ---> AHB Clock ---> IPG Clock */ freq = CLOCK_GetPeriphClkFreq() / (((CCM->CBCDR & CCM_CBCDR_AHB_PODF_MASK) >> CCM_CBCDR_AHB_PODF_SHIFT) + 1U); freq /= (((CCM->CBCDR & CCM_CBCDR_IPG_PODF_MASK) >> CCM_CBCDR_IPG_PODF_SHIFT) + 1U); break; case kCLOCK_OscClk: freq = CLOCK_GetOscFreq(); break; case kCLOCK_RtcClk: freq = CLOCK_GetRtcFreq(); break; case kCLOCK_ArmPllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllArm); break; case kCLOCK_Usb1PllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllUsb1); break; case kCLOCK_Usb1PllPfd0Clk: freq = CLOCK_GetUsb1PfdFreq(kCLOCK_Pfd0); break; case kCLOCK_Usb1PllPfd1Clk: freq = CLOCK_GetUsb1PfdFreq(kCLOCK_Pfd1); break; case kCLOCK_Usb1PllPfd2Clk: freq = CLOCK_GetUsb1PfdFreq(kCLOCK_Pfd2); break; case kCLOCK_Usb1PllPfd3Clk: freq = CLOCK_GetUsb1PfdFreq(kCLOCK_Pfd3); break; case kCLOCK_Usb2PllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllUsb2); break; case kCLOCK_SysPllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllSys); break; case kCLOCK_SysPllPfd0Clk: freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd0); break; case kCLOCK_SysPllPfd1Clk: freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd1); break; case kCLOCK_SysPllPfd2Clk: freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd2); break; case kCLOCK_SysPllPfd3Clk: freq = CLOCK_GetSysPfdFreq(kCLOCK_Pfd3); break; case kCLOCK_EnetPll0Clk: freq = CLOCK_GetPllFreq(kCLOCK_PllEnet); break; case kCLOCK_EnetPll1Clk: freq = CLOCK_GetPllFreq(kCLOCK_PllEnet25M); break; case kCLOCK_AudioPllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllAudio); break; case kCLOCK_VideoPllClk: freq = CLOCK_GetPllFreq(kCLOCK_PllVideo); break; default: freq = 0U; break; } return freq; } bool CLOCK_EnableUsbhs0Clock(clock_usb_src_t src, uint32_t freq) { CCM->CCGR6 |= CCM_CCGR6_CG0_MASK; USB1->USBCMD |= USBHS_USBCMD_RST_MASK; for (volatile uint32_t i = 0; i < 400000; i++) /* Add a delay between RST and RS so make sure there is a DP pullup sequence*/ { __ASM("nop"); } PMU->REG_3P0 = (PMU->REG_3P0 & (~PMU_REG_3P0_OUTPUT_TRG_MASK)) | (PMU_REG_3P0_OUTPUT_TRG(0x17) | PMU_REG_3P0_ENABLE_LINREG_MASK); return true; } bool CLOCK_EnableUsbhs1Clock(clock_usb_src_t src, uint32_t freq) { CCM->CCGR6 |= CCM_CCGR6_CG0_MASK; USB2->USBCMD |= USBHS_USBCMD_RST_MASK; for (volatile uint32_t i = 0; i < 400000; i++) /* Add a delay between RST and RS so make sure there is a DP pullup sequence*/ { __ASM("nop"); } PMU->REG_3P0 = (PMU->REG_3P0 & (~PMU_REG_3P0_OUTPUT_TRG_MASK)) | (PMU_REG_3P0_OUTPUT_TRG(0x17) | PMU_REG_3P0_ENABLE_LINREG_MASK); return true; } bool CLOCK_EnableUsbhs0PhyPllClock(clock_usb_phy_src_t src, uint32_t freq) { const clock_usb_pll_config_t g_ccmConfigUsbPll = {.loopDivider = 0U}; if (CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_ENABLE_MASK) { CCM_ANALOG->PLL_USB1 |= CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK; } else { CLOCK_InitUsb1Pll(&g_ccmConfigUsbPll); } USBPHY1->CTRL &= ~USBPHY_CTRL_SFTRST_MASK; /* release PHY from reset */ USBPHY1->CTRL &= ~USBPHY_CTRL_CLKGATE_MASK; USBPHY1->PWD = 0; USBPHY1->CTRL |= USBPHY_CTRL_ENAUTOCLR_PHY_PWD_MASK | USBPHY_CTRL_ENAUTOCLR_CLKGATE_MASK | USBPHY_CTRL_ENUTMILEVEL2_MASK | USBPHY_CTRL_ENUTMILEVEL3_MASK; return true; } void CLOCK_DisableUsbhs0PhyPllClock(void) { CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK; USBPHY1->CTRL |= USBPHY_CTRL_CLKGATE_MASK; /* Set to 1U to gate clocks */ } void CLOCK_InitArmPll(const clock_arm_pll_config_t *config) { /* Bypass PLL first */ CCM_ANALOG->PLL_ARM = (CCM_ANALOG->PLL_ARM & (~CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_ARM_BYPASS_MASK | CCM_ANALOG_PLL_ARM_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_ARM = (CCM_ANALOG->PLL_ARM & (~(CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK | CCM_ANALOG_PLL_ARM_POWERDOWN_MASK))) | CCM_ANALOG_PLL_ARM_ENABLE_MASK | CCM_ANALOG_PLL_ARM_DIV_SELECT(config->loopDivider); while ((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_ARM &= ~CCM_ANALOG_PLL_ARM_BYPASS_MASK; } void CLOCK_DeinitArmPll(void) { CCM_ANALOG->PLL_ARM = CCM_ANALOG_PLL_ARM_POWERDOWN_MASK; } void CLOCK_InitSysPll(const clock_sys_pll_config_t *config) { /* Bypass PLL first */ CCM_ANALOG->PLL_SYS = (CCM_ANALOG->PLL_SYS & (~CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_SYS_BYPASS_MASK | CCM_ANALOG_PLL_SYS_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_SYS = (CCM_ANALOG->PLL_SYS & (~(CCM_ANALOG_PLL_SYS_DIV_SELECT_MASK | CCM_ANALOG_PLL_SYS_POWERDOWN_MASK))) | CCM_ANALOG_PLL_SYS_ENABLE_MASK | CCM_ANALOG_PLL_SYS_DIV_SELECT(config->loopDivider); while ((CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_SYS &= ~CCM_ANALOG_PLL_SYS_BYPASS_MASK; } void CLOCK_DeinitSysPll(void) { CCM_ANALOG->PLL_SYS = CCM_ANALOG_PLL_SYS_POWERDOWN_MASK; } void CLOCK_InitUsb1Pll(const clock_usb_pll_config_t *config) { /* Bypass PLL first */ CCM_ANALOG->PLL_USB1 = (CCM_ANALOG->PLL_USB1 & (~CCM_ANALOG_PLL_USB1_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_USB1_BYPASS_MASK | CCM_ANALOG_PLL_USB1_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_USB1 = (CCM_ANALOG->PLL_USB1 & (~CCM_ANALOG_PLL_USB1_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_USB1_ENABLE_MASK | CCM_ANALOG_PLL_USB1_POWER_MASK | CCM_ANALOG_PLL_USB1_EN_USB_CLKS_MASK | CCM_ANALOG_PLL_USB1_DIV_SELECT(config->loopDivider); while ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_USB1 &= ~CCM_ANALOG_PLL_USB1_BYPASS_MASK; } void CLOCK_DeinitUsb1Pll(void) { CCM_ANALOG->PLL_USB1 = 0U; } void CLOCK_InitUsb2Pll(const clock_usb_pll_config_t *config) { /* Bypass PLL first */ CCM_ANALOG->PLL_USB2 = (CCM_ANALOG->PLL_USB2 & (~CCM_ANALOG_PLL_USB2_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_USB2_BYPASS_MASK | CCM_ANALOG_PLL_USB2_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_USB2 = (CCM_ANALOG->PLL_USB2 & (~CCM_ANALOG_PLL_USB2_DIV_SELECT_MASK)) | CCM_ANALOG_PLL_USB2_ENABLE_MASK | CCM_ANALOG_PLL_USB2_POWER_MASK | CCM_ANALOG_PLL_USB2_EN_USB_CLKS_MASK | CCM_ANALOG_PLL_USB2_DIV_SELECT(config->loopDivider); while ((CCM_ANALOG->PLL_USB2 & CCM_ANALOG_PLL_USB2_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_USB2 &= ~CCM_ANALOG_PLL_USB2_BYPASS_MASK; } void CLOCK_DeinitUsb2Pll(void) { CCM_ANALOG->PLL_USB2 = 0U; } void CLOCK_InitAudioPll(const clock_audio_pll_config_t *config) { uint32_t pllAudio; uint32_t misc2 = 0; /* Bypass PLL first */ CCM_ANALOG->PLL_AUDIO = (CCM_ANALOG->PLL_AUDIO & (~CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_AUDIO_BYPASS_MASK | CCM_ANALOG_PLL_AUDIO_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_AUDIO_NUM = CCM_ANALOG_PLL_AUDIO_NUM_A(config->numerator); CCM_ANALOG->PLL_AUDIO_DENOM = CCM_ANALOG_PLL_AUDIO_DENOM_B(config->denominator); /* * Set post divider: * * ------------------------------------------------------------------------ * | config->postDivider | PLL_AUDIO[POST_DIV_SELECT] | MISC2[AUDIO_DIV] | * ------------------------------------------------------------------------ * | 1 | 2 | 0 | * ------------------------------------------------------------------------ * | 2 | 1 | 0 | * ------------------------------------------------------------------------ * | 4 | 2 | 3 | * ------------------------------------------------------------------------ * | 8 | 1 | 3 | * ------------------------------------------------------------------------ * | 16 | 0 | 3 | * ------------------------------------------------------------------------ */ pllAudio = (CCM_ANALOG->PLL_AUDIO & (~(CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK | CCM_ANALOG_PLL_AUDIO_POWERDOWN_MASK))) | CCM_ANALOG_PLL_AUDIO_ENABLE_MASK | CCM_ANALOG_PLL_AUDIO_DIV_SELECT(config->loopDivider); switch (config->postDivider) { case 16: pllAudio |= CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(0); misc2 = CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK | CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; break; case 8: pllAudio |= CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(1); misc2 = CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK | CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; break; case 4: pllAudio |= CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(2); misc2 = CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK | CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK; break; case 2: pllAudio |= CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(1); break; default: pllAudio |= CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(2); break; } CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & ~(CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK | CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK)) | misc2; CCM_ANALOG->PLL_AUDIO = pllAudio; while ((CCM_ANALOG->PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_AUDIO &= ~CCM_ANALOG_PLL_AUDIO_BYPASS_MASK; } void CLOCK_DeinitAudioPll(void) { CCM_ANALOG->PLL_AUDIO = CCM_ANALOG_PLL_AUDIO_POWERDOWN_MASK; } void CLOCK_InitVideoPll(const clock_video_pll_config_t *config) { uint32_t pllVideo; uint32_t misc2 = 0; /* Bypass PLL first */ CCM_ANALOG->PLL_VIDEO = (CCM_ANALOG->PLL_VIDEO & (~CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_VIDEO_BYPASS_MASK | CCM_ANALOG_PLL_VIDEO_BYPASS_CLK_SRC(config->src); CCM_ANALOG->PLL_VIDEO_NUM = CCM_ANALOG_PLL_VIDEO_NUM_A(config->numerator); CCM_ANALOG->PLL_VIDEO_DENOM = CCM_ANALOG_PLL_VIDEO_DENOM_B(config->denominator); /* * Set post divider: * * ------------------------------------------------------------------------ * | config->postDivider | PLL_VIDEO[POST_DIV_SELECT] | MISC2[VIDEO_DIV] | * ------------------------------------------------------------------------ * | 1 | 2 | 0 | * ------------------------------------------------------------------------ * | 2 | 1 | 0 | * ------------------------------------------------------------------------ * | 4 | 2 | 3 | * ------------------------------------------------------------------------ * | 8 | 1 | 3 | * ------------------------------------------------------------------------ * | 16 | 0 | 3 | * ------------------------------------------------------------------------ */ pllVideo = (CCM_ANALOG->PLL_VIDEO & (~(CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK | CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK))) | CCM_ANALOG_PLL_VIDEO_ENABLE_MASK | CCM_ANALOG_PLL_VIDEO_DIV_SELECT(config->loopDivider); switch (config->postDivider) { case 16: pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(0); misc2 = CCM_ANALOG_MISC2_VIDEO_DIV(3); break; case 8: pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); misc2 = CCM_ANALOG_MISC2_VIDEO_DIV(3); break; case 4: pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(2); misc2 = CCM_ANALOG_MISC2_VIDEO_DIV(3); break; case 2: pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1); break; default: pllVideo |= CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(2); break; } CCM_ANALOG->MISC2 = (CCM_ANALOG->MISC2 & ~CCM_ANALOG_MISC2_VIDEO_DIV_MASK) | misc2; CCM_ANALOG->PLL_VIDEO = pllVideo; while ((CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_VIDEO &= ~CCM_ANALOG_PLL_VIDEO_BYPASS_MASK; } void CLOCK_DeinitVideoPll(void) { CCM_ANALOG->PLL_VIDEO = CCM_ANALOG_PLL_VIDEO_POWERDOWN_MASK; } void CLOCK_InitEnetPll(const clock_enet_pll_config_t *config) { uint32_t enet_pll = CCM_ANALOG_PLL_ENET_DIV_SELECT(config->loopDivider); CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC_MASK)) | CCM_ANALOG_PLL_ENET_BYPASS_MASK | CCM_ANALOG_PLL_ENET_BYPASS_CLK_SRC(config->src); if (config->enableClkOutput) { enet_pll |= CCM_ANALOG_PLL_ENET_ENABLE_MASK; } if (config->enableClkOutput25M) { enet_pll |= CCM_ANALOG_PLL_ENET_ENET_25M_REF_EN_MASK; } CCM_ANALOG->PLL_ENET = (CCM_ANALOG->PLL_ENET & (~(CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK | CCM_ANALOG_PLL_ENET_POWERDOWN_MASK))) | enet_pll; /* Wait for stable */ while ((CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_LOCK_MASK) == 0) { } /* Disable Bypass */ CCM_ANALOG->PLL_ENET &= ~CCM_ANALOG_PLL_ENET_BYPASS_MASK; } void CLOCK_DeinitEnetPll(void) { CCM_ANALOG->PLL_ENET = CCM_ANALOG_PLL_ENET_POWERDOWN_MASK; } uint32_t CLOCK_GetPllFreq(clock_pll_t pll) { uint32_t freq; uint32_t divSelect; uint64_t freqTmp; const uint32_t enetRefClkFreq[] = { 25000000U, /* 25M */ 50000000U, /* 50M */ 100000000U, /* 100M */ 125000000U /* 125M */ }; /* check if PLL is enabled */ if (!CLOCK_IsPllEnabled(CCM_ANALOG, pll)) { return 0U; } /* get pll reference clock */ freq = CLOCK_GetPllBypassRefClk(CCM_ANALOG, pll); /* check if pll is bypassed */ if (CLOCK_IsPllBypassed(CCM_ANALOG, pll)) { return freq; } switch (pll) { case kCLOCK_PllArm: freq = ((freq * ((CCM_ANALOG->PLL_ARM & CCM_ANALOG_PLL_ARM_DIV_SELECT_MASK) >> CCM_ANALOG_PLL_ARM_DIV_SELECT_SHIFT)) >> 1U); break; case kCLOCK_PllSys: /* PLL output frequency = Fref * (DIV_SELECT + NUM/DENOM). */ freqTmp = ((uint64_t)freq * ((uint64_t)(CCM_ANALOG->PLL_SYS_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_SYS_DENOM)); if (CCM_ANALOG->PLL_SYS & CCM_ANALOG_PLL_SYS_DIV_SELECT_MASK) { freq *= 22U; } else { freq *= 20U; } freq += (uint32_t)freqTmp; break; case kCLOCK_PllUsb1: freq = (freq * ((CCM_ANALOG->PLL_USB1 & CCM_ANALOG_PLL_USB1_DIV_SELECT_MASK) ? 22U : 20U)); break; case kCLOCK_PllAudio: /* PLL output frequency = Fref * (DIV_SELECT + NUM/DENOM). */ divSelect = (CCM_ANALOG->PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_DIV_SELECT_MASK) >> CCM_ANALOG_PLL_AUDIO_DIV_SELECT_SHIFT; freqTmp = ((uint64_t)freq * ((uint64_t)(CCM_ANALOG->PLL_AUDIO_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_AUDIO_DENOM)); freq = freq * divSelect + (uint32_t)freqTmp; /* AUDIO PLL output = PLL output frequency / POSTDIV. */ /* * Post divider: * * PLL_AUDIO[POST_DIV_SELECT]: * 0x00: 4 * 0x01: 2 * 0x02: 1 * * MISC2[AUDO_DIV]: * 0x00: 1 * 0x01: 2 * 0x02: 1 * 0x03: 4 */ switch (CCM_ANALOG->PLL_AUDIO & CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT_MASK) { case CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(0U): freq = freq >> 2U; break; case CCM_ANALOG_PLL_AUDIO_POST_DIV_SELECT(1U): freq = freq >> 1U; break; default: break; } switch (CCM_ANALOG->MISC2 & (CCM_ANALOG_MISC2_AUDIO_DIV_MSB_MASK | CCM_ANALOG_MISC2_AUDIO_DIV_LSB_MASK)) { case CCM_ANALOG_MISC2_AUDIO_DIV_MSB(1) | CCM_ANALOG_MISC2_AUDIO_DIV_LSB(1): freq >>= 2U; break; case CCM_ANALOG_MISC2_AUDIO_DIV_MSB(0) | CCM_ANALOG_MISC2_AUDIO_DIV_LSB(1): freq >>= 1U; break; default: break; } break; case kCLOCK_PllVideo: /* PLL output frequency = Fref * (DIV_SELECT + NUM/DENOM). */ divSelect = (CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_DIV_SELECT_MASK) >> CCM_ANALOG_PLL_VIDEO_DIV_SELECT_SHIFT; freqTmp = ((uint64_t)freq * ((uint64_t)(CCM_ANALOG->PLL_VIDEO_NUM))) / ((uint64_t)(CCM_ANALOG->PLL_VIDEO_DENOM)); freq = freq * divSelect + (uint32_t)freqTmp; /* VIDEO PLL output = PLL output frequency / POSTDIV. */ /* * Post divider: * * PLL_VIDEO[POST_DIV_SELECT]: * 0x00: 4 * 0x01: 2 * 0x02: 1 * * MISC2[VIDEO_DIV]: * 0x00: 1 * 0x01: 2 * 0x02: 1 * 0x03: 4 */ switch (CCM_ANALOG->PLL_VIDEO & CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT_MASK) { case CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(0U): freq = freq >> 2U; break; case CCM_ANALOG_PLL_VIDEO_POST_DIV_SELECT(1U): freq = freq >> 1U; break; default: break; } switch (CCM_ANALOG->MISC2 & CCM_ANALOG_MISC2_VIDEO_DIV_MASK) { case CCM_ANALOG_MISC2_VIDEO_DIV(3): freq >>= 2U; break; case CCM_ANALOG_MISC2_VIDEO_DIV(1): freq >>= 1U; break; default: break; } break; case kCLOCK_PllEnet: divSelect = (CCM_ANALOG->PLL_ENET & CCM_ANALOG_PLL_ENET_DIV_SELECT_MASK) >> CCM_ANALOG_PLL_ENET_DIV_SELECT_SHIFT; freq = enetRefClkFreq[divSelect]; break; case kCLOCK_PllEnet25M: /* ref_enetpll1 if fixed at 25MHz. */ freq = 25000000UL; break; case kCLOCK_PllUsb2: freq = (freq * ((CCM_ANALOG->PLL_USB2 & CCM_ANALOG_PLL_USB2_DIV_SELECT_MASK) ? 22U : 20U)); break; default: freq = 0U; break; } return freq; } void CLOCK_InitSysPfd(clock_pfd_t pfd, uint8_t pfdFrac) { uint32_t pfdIndex = (uint32_t)pfd; uint32_t pfd528; pfd528 = CCM_ANALOG->PFD_528 & ~((CCM_ANALOG_PFD_528_PFD0_CLKGATE_MASK | CCM_ANALOG_PFD_528_PFD0_FRAC_MASK) << (8 * pfdIndex)); /* Disable the clock output first. */ CCM_ANALOG->PFD_528 = pfd528 | (CCM_ANALOG_PFD_528_PFD0_CLKGATE_MASK << (8 * pfdIndex)); /* Set the new value and enable output. */ CCM_ANALOG->PFD_528 = pfd528 | (CCM_ANALOG_PFD_528_PFD0_FRAC(pfdFrac) << (8 * pfdIndex)); } void CLOCK_DeinitSysPfd(clock_pfd_t pfd) { CCM_ANALOG->PFD_528 |= CCM_ANALOG_PFD_528_PFD0_CLKGATE_MASK << (8 * pfd); } void CLOCK_InitUsb1Pfd(clock_pfd_t pfd, uint8_t pfdFrac) { uint32_t pfdIndex = (uint32_t)pfd; uint32_t pfd480; pfd480 = CCM_ANALOG->PFD_480 & ~((CCM_ANALOG_PFD_480_PFD0_CLKGATE_MASK | CCM_ANALOG_PFD_480_PFD0_FRAC_MASK) << (8 * pfdIndex)); /* Disable the clock output first. */ CCM_ANALOG->PFD_480 = pfd480 | (CCM_ANALOG_PFD_480_PFD0_CLKGATE_MASK << (8 * pfdIndex)); /* Set the new value and enable output. */ CCM_ANALOG->PFD_480 = pfd480 | (CCM_ANALOG_PFD_480_PFD0_FRAC(pfdFrac) << (8 * pfdIndex)); } void CLOCK_DeinitUsb1Pfd(clock_pfd_t pfd) { CCM_ANALOG->PFD_480 |= CCM_ANALOG_PFD_480_PFD0_CLKGATE_MASK << (8 * pfd); } uint32_t CLOCK_GetSysPfdFreq(clock_pfd_t pfd) { uint32_t freq = CLOCK_GetPllFreq(kCLOCK_PllSys); switch (pfd) { case kCLOCK_Pfd0: freq /= ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD0_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD0_FRAC_SHIFT); break; case kCLOCK_Pfd1: freq /= ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD1_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD1_FRAC_SHIFT); break; case kCLOCK_Pfd2: freq /= ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD2_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD2_FRAC_SHIFT); break; case kCLOCK_Pfd3: freq /= ((CCM_ANALOG->PFD_528 & CCM_ANALOG_PFD_528_PFD3_FRAC_MASK) >> CCM_ANALOG_PFD_528_PFD3_FRAC_SHIFT); break; default: freq = 0U; break; } freq *= 18U; return freq; } uint32_t CLOCK_GetUsb1PfdFreq(clock_pfd_t pfd) { uint32_t freq = CLOCK_GetPllFreq(kCLOCK_PllUsb1); switch (pfd) { case kCLOCK_Pfd0: freq /= ((CCM_ANALOG->PFD_480 & CCM_ANALOG_PFD_480_PFD0_FRAC_MASK) >> CCM_ANALOG_PFD_480_PFD0_FRAC_SHIFT); break; case kCLOCK_Pfd1: freq /= ((CCM_ANALOG->PFD_480 & CCM_ANALOG_PFD_480_PFD1_FRAC_MASK) >> CCM_ANALOG_PFD_480_PFD1_FRAC_SHIFT); break; case kCLOCK_Pfd2: freq /= ((CCM_ANALOG->PFD_480 & CCM_ANALOG_PFD_480_PFD2_FRAC_MASK) >> CCM_ANALOG_PFD_480_PFD2_FRAC_SHIFT); break; case kCLOCK_Pfd3: freq /= ((CCM_ANALOG->PFD_480 & CCM_ANALOG_PFD_480_PFD3_FRAC_MASK) >> CCM_ANALOG_PFD_480_PFD3_FRAC_SHIFT); break; default: freq = 0U; break; } freq *= 18U; return freq; } bool CLOCK_EnableUsbhs1PhyPllClock(clock_usb_phy_src_t src, uint32_t freq) { const clock_usb_pll_config_t g_ccmConfigUsbPll = {.loopDivider = 0U}; CLOCK_InitUsb2Pll(&g_ccmConfigUsbPll); USBPHY2->CTRL &= ~USBPHY_CTRL_SFTRST_MASK; /* release PHY from reset */ USBPHY2->CTRL &= ~USBPHY_CTRL_CLKGATE_MASK; USBPHY2->PWD = 0; USBPHY2->CTRL |= USBPHY_CTRL_ENAUTOCLR_PHY_PWD_MASK | USBPHY_CTRL_ENAUTOCLR_CLKGATE_MASK | USBPHY_CTRL_ENUTMILEVEL2_MASK | USBPHY_CTRL_ENUTMILEVEL3_MASK; return true; } void CLOCK_DisableUsbhs1PhyPllClock(void) { CCM_ANALOG->PLL_USB2 &= ~CCM_ANALOG_PLL_USB2_EN_USB_CLKS_MASK; USBPHY2->CTRL |= USBPHY_CTRL_CLKGATE_MASK; /* Set to 1U to gate clocks */ }