/**************************************************************************//** * * @copyright (C) 2020 Nuvoton Technology Corp. All rights reserved. * * SPDX-License-Identifier: Apache-2.0 * * Change Logs: * Date Author Notes * 2020-12-12 Wayne First version * ******************************************************************************/ #include #if defined(BSP_USING_UART) #include #include "drv_uart.h" #include "drv_sys.h" #include "drv_common.h" #if defined(RT_SERIAL_USING_DMA) #include #endif #define LOG_TAG "drv.uart" //#undef DBG_ENABLE #define DBG_SECTION_NAME LOG_TAG #define DBG_LEVEL LOG_LVL_INFO #define DBG_COLOR #include /* Private define ---------------------------------------------------------------*/ enum { UART_START = -1, #if defined(BSP_USING_UART0) UART0_IDX, #endif #if defined(BSP_USING_UART1) UART1_IDX, #endif #if defined(BSP_USING_UART2) UART2_IDX, #endif #if defined(BSP_USING_UART3) UART3_IDX, #endif #if defined(BSP_USING_UART4) UART4_IDX, #endif #if defined(BSP_USING_UART5) UART5_IDX, #endif #if defined(BSP_USING_UART6) UART6_IDX, #endif #if defined(BSP_USING_UART7) UART7_IDX, #endif #if defined(BSP_USING_UART8) UART8_IDX, #endif #if defined(BSP_USING_UART9) UART9_IDX, #endif #if defined(BSP_USING_UART10) UART10_IDX, #endif #if defined(BSP_USING_UART11) UART11_IDX, #endif #if defined(BSP_USING_UART12) UART12_IDX, #endif #if defined(BSP_USING_UART13) UART13_IDX, #endif #if defined(BSP_USING_UART14) UART14_IDX, #endif #if defined(BSP_USING_UART15) UART15_IDX, #endif #if defined(BSP_USING_UART16) UART16_IDX, #endif UART_CNT }; struct nu_rxbuf_ctx { void * pvRxBuf; uint32_t bufsize; uint32_t wrote_offset; uint32_t reserved; }; typedef struct nu_rxbuf_ctx *nu_rxbuf_ctx_t; /* Private typedef --------------------------------------------------------------*/ struct nu_uart { rt_serial_t dev; char *name; UART_T *base; IRQn_Type irqn; uint32_t rstidx; #if defined(RT_SERIAL_USING_DMA) uint32_t dma_flag; int16_t pdma_perp_tx; int8_t pdma_chanid_tx; int16_t pdma_perp_rx; int8_t pdma_chanid_rx; nu_pdma_desc_t pdma_rx_desc; struct nu_rxbuf_ctx dmabuf; struct nu_rxbuf_ctx userbuf; #endif }; typedef struct nu_uart *nu_uart_t; /* Private functions ------------------------------------------------------------*/ static rt_err_t nu_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg); static rt_err_t nu_uart_control(struct rt_serial_device *serial, int cmd, void *arg); static int nu_uart_send(struct rt_serial_device *serial, char c); static int nu_uart_receive(struct rt_serial_device *serial); #if defined(RT_SERIAL_USING_DMA) static rt_ssize_t nu_uart_dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction); static void nu_pdma_uart_rx_cb(void *pvOwner, uint32_t u32Events); static void nu_pdma_uart_tx_cb(void *pvOwner, uint32_t u32Events); static uint32_t nu_uart_flush(nu_uart_t psNuUart, uint32_t pdma_new_rxsize); #endif /* Private variables ------------------------------------------------------------*/ static const struct rt_uart_ops nu_uart_ops = { .configure = nu_uart_configure, .control = nu_uart_control, .putc = nu_uart_send, .getc = nu_uart_receive, #if defined(RT_SERIAL_USING_DMA) .dma_transmit = nu_uart_dma_transmit #else .dma_transmit = RT_NULL #endif }; static const struct serial_configure nu_uart_default_config = RT_SERIAL_CONFIG_DEFAULT; static struct nu_uart nu_uart_arr [] = { #if defined(BSP_USING_UART0) { .name = "uart0", .base = UART0, .irqn = UART0_IRQn, .rstidx = UART0_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART0_TX_DMA) .pdma_perp_tx = PDMA_UART0_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART0_RX_DMA) .pdma_perp_rx = PDMA_UART0_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART1) { .name = "uart1", .base = UART1, .irqn = UART1_IRQn, .rstidx = UART1_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART1_TX_DMA) .pdma_perp_tx = PDMA_UART1_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART1_RX_DMA) .pdma_perp_rx = PDMA_UART1_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART2) { .name = "uart2", .base = UART2, .irqn = UART2_IRQn, .rstidx = UART2_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART2_TX_DMA) .pdma_perp_tx = PDMA_UART2_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART2_RX_DMA) .pdma_perp_rx = PDMA_UART2_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART3) { .name = "uart3", .base = UART3, .irqn = UART3_IRQn, .rstidx = UART3_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART3_TX_DMA) .pdma_perp_tx = PDMA_UART3_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART3_RX_DMA) .pdma_perp_rx = PDMA_UART3_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART4) { .name = "uart4", .base = UART4, .irqn = UART4_IRQn, .rstidx = UART4_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART4_TX_DMA) .pdma_perp_tx = PDMA_UART4_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART4_RX_DMA) .pdma_perp_rx = PDMA_UART4_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART5) { .name = "uart5", .base = UART5, .irqn = UART5_IRQn, .rstidx = UART5_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART5_TX_DMA) .pdma_perp_tx = PDMA_UART5_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART5_RX_DMA) .pdma_perp_rx = PDMA_UART5_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART6) { .name = "uart6", .base = UART6, .irqn = UART6_IRQn, .rstidx = UART6_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART6_TX_DMA) .pdma_perp_tx = PDMA_UART6_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART6_RX_DMA) .pdma_perp_rx = PDMA_UART6_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART7) { .name = "uart7", .base = UART7, .irqn = UART7_IRQn, .rstidx = UART7_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART7_TX_DMA) .pdma_perp_tx = PDMA_UART7_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART7_RX_DMA) .pdma_perp_rx = PDMA_UART7_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART8) { .name = "uart8", .base = UART8, .irqn = UART8_IRQn, .rstidx = UART8_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART8_TX_DMA) .pdma_perp_tx = PDMA_UART8_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART8_RX_DMA) .pdma_perp_rx = PDMA_UART8_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART9) { .name = "uart9", .base = UART9, .irqn = UART9_IRQn, .rstidx = UART9_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART9_TX_DMA) .pdma_perp_tx = PDMA_UART9_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART9_RX_DMA) .pdma_perp_rx = PDMA_UART9_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART10) { .name = "uart10", .base = UART10, .irqn = UART10_IRQn, .rstidx = UART10_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART10_TX_DMA) .pdma_perp_tx = PDMA_UART10_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART10_RX_DMA) .pdma_perp_rx = PDMA_UART10_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART11) { .name = "uart11", .base = UART11, .irqn = UART11_IRQn, .rstidx = UART11_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART11_TX_DMA) .pdma_perp_tx = PDMA_UART11_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART11_RX_DMA) .pdma_perp_rx = PDMA_UART11_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART12) { .name = "uart12", .base = UART12, .irqn = UART12_IRQn, .rstidx = UART12_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART12_TX_DMA) .pdma_perp_tx = PDMA_UART12_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART12_RX_DMA) .pdma_perp_rx = PDMA_UART12_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART13) { .name = "uart13", .base = UART13, .irqn = UART13_IRQn, .rstidx = UART13_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART13_TX_DMA) .pdma_perp_tx = PDMA_UART13_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART13_RX_DMA) .pdma_perp_rx = PDMA_UART13_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART14) { .name = "uart14", .base = UART14, .irqn = UART14_IRQn, .rstidx = UART14_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART14_TX_DMA) .pdma_perp_tx = PDMA_UART14_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART14_RX_DMA) .pdma_perp_rx = PDMA_UART14_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART15) { .name = "uart15", .base = UART15, .irqn = UART15_IRQn, .rstidx = UART15_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART15_TX_DMA) .pdma_perp_tx = PDMA_UART15_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART15_RX_DMA) .pdma_perp_rx = PDMA_UART15_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif #if defined(BSP_USING_UART16) { .name = "uart16", .base = UART16, .irqn = UART16_IRQn, .rstidx = UART16_RST, #if defined(RT_SERIAL_USING_DMA) #if defined(BSP_USING_UART16_TX_DMA) .pdma_perp_tx = PDMA_UART16_TX, #else .pdma_perp_tx = NU_PDMA_UNUSED, #endif #if defined(BSP_USING_UART16_RX_DMA) .pdma_perp_rx = PDMA_UART16_RX, #else .pdma_perp_rx = NU_PDMA_UNUSED, #endif #endif }, #endif }; /* uart nu_uart */ /** * All UART interrupt service routine */ static void nu_uart_isr(int vector, void *param) { /* Get base address of uart register */ nu_uart_t psNuUart = (nu_uart_t)param; UART_T *base = psNuUart->base; /* Get interrupt event */ uint32_t u32IntSts = base->INTSTS; uint32_t u32FIFOSts = base->FIFOSTS; #if defined(RT_SERIAL_USING_DMA) if (u32IntSts & UART_INTSTS_PRLSIF_Msk) { /* Drain RX FIFO to remove remain FEF frames in FIFO. */ base->FIFO |= UART_FIFO_RXRST_Msk; base->FIFOSTS |= (UART_FIFOSTS_BIF_Msk | UART_FIFOSTS_FEF_Msk | UART_FIFOSTS_PEF_Msk); return; } if (u32IntSts & UART_INTSTS_PTOIF_Msk) { nu_uart_flush(psNuUart, 0); return; } #endif /* Handle RX event */ if (u32IntSts & (UART_INTSTS_RDAINT_Msk | UART_INTSTS_RXTOINT_Msk)) { rt_hw_serial_isr(&psNuUart->dev, RT_SERIAL_EVENT_RX_IND); } base->INTSTS = u32IntSts; base->FIFOSTS = u32FIFOSts; } /** * Set RS-485 AUD mode */ void nu_uart_set_rs485aud(struct rt_serial_device *serial, rt_bool_t bRTSActiveLowLevel) { nu_uart_t psNuUart = (nu_uart_t)serial; UART_T *base; RT_ASSERT(serial); /* Get base address of uart register */ base = ((nu_uart_t)serial)->base; /* Set RTS as RS-485 phy direction controlling ping. */ UART_SelectRS485Mode(base, UART_ALTCTL_RS485AUD_Msk, 0); if (bRTSActiveLowLevel) { /* Set direction pin as active-low. */ base->MODEM |= UART_MODEM_RTSACTLV_Msk; } else { /* Set direction pin as active-high. */ base->MODEM &= ~UART_MODEM_RTSACTLV_Msk; } LOG_I("Set %s to RS-485 AUD function mode. ActiveLowLevel-%s", psNuUart->name, bRTSActiveLowLevel ? "YES" : "NO"); } /** * Configure uart port */ static rt_err_t nu_uart_configure(struct rt_serial_device *serial, struct serial_configure *cfg) { nu_uart_t psNuUart = (nu_uart_t)serial; rt_err_t ret = RT_EOK; uint32_t uart_word_len, uart_stop_bit, uart_parity; RT_ASSERT(serial); RT_ASSERT(cfg); /* Check baudrate */ RT_ASSERT(cfg->baud_rate != 0); uart_word_len = uart_stop_bit = uart_parity = 0; /* Get base address of uart register */ UART_T *base = psNuUart->base; /* Check word len */ switch (cfg->data_bits) { case DATA_BITS_5: uart_word_len = UART_WORD_LEN_5; break; case DATA_BITS_6: uart_word_len = UART_WORD_LEN_6; break; case DATA_BITS_7: uart_word_len = UART_WORD_LEN_7; break; case DATA_BITS_8: uart_word_len = UART_WORD_LEN_8; break; default: LOG_E("Unsupported data length."); ret = -RT_EINVAL; goto exit_nu_uart_configure; } /* Check stop bit */ switch (cfg->stop_bits) { case STOP_BITS_1: uart_stop_bit = UART_STOP_BIT_1; break; case STOP_BITS_2: uart_stop_bit = UART_STOP_BIT_2; break; default: LOG_E("Unsupported stop bit."); ret = -RT_EINVAL; goto exit_nu_uart_configure; } /* Check parity */ switch (cfg->parity) { case PARITY_NONE: uart_parity = UART_PARITY_NONE; break; case PARITY_ODD: uart_parity = UART_PARITY_ODD; break; case PARITY_EVEN: uart_parity = UART_PARITY_EVEN; break; default: LOG_E("Unsupported parity."); ret = -RT_EINVAL; goto exit_nu_uart_configure; } /* Reset this module */ nu_sys_ip_reset(psNuUart->rstidx); /* Open Uart and set UART Baudrate */ UART_Open(base, cfg->baud_rate); /* Set line configuration. */ UART_SetLineConfig(base, 0, uart_word_len, uart_parity, uart_stop_bit); /* Enable interrupt. */ rt_hw_interrupt_umask(psNuUart->irqn); exit_nu_uart_configure: if (ret != RT_EOK) UART_Close(base); return -(ret); } #if defined(RT_SERIAL_USING_DMA) static uint32_t nu_uart_flush_sync( uint8_t *dst_buf_start, uint8_t *dst_buf_put, uint8_t *src_buf_start, uint8_t *src_buf_put, uint32_t bufsize, uint32_t sync_len) { uint32_t count = 0; /* Copy bytes in Source's ring-buffer to Destination's ring-buffer. */ while ( count < sync_len ) { if ( dst_buf_put >= (dst_buf_start + bufsize) ) { dst_buf_put = dst_buf_start; } if ( src_buf_put >= (src_buf_start + bufsize) ) { src_buf_put = src_buf_start; } *dst_buf_put = *src_buf_put; src_buf_put++; dst_buf_put++; count++; } return count; } static uint32_t nu_uart_flush(nu_uart_t psNuUart, uint32_t pdma_new_rxsize) { uint32_t recv_len; UART_T *base = psNuUart->base; uint8_t tempbuf[64]; /* Disable Receive Line interrupt first. */ UART_DISABLE_INT(base, UART_INTEN_RXPDMAEN_Msk); /* Pick up RX bytes in PDMA RX BUFFER. */ if ( pdma_new_rxsize > 0 ) { nu_pdma_desc_t psDesc = nu_pdma_get_channel_desc(psNuUart->pdma_chanid_rx); #if !defined(USE_MA35D1_SUBM) uint8_t *pu8DmaBuf_noncache = (uint8_t *)(psDesc->DA + UNCACHEABLE); #else uint8_t *pu8DmaBuf_noncache = (uint8_t *)(psDesc->DA); #endif /* Update wrote offset of user buffer. */ psNuUart->userbuf.wrote_offset += nu_uart_flush_sync( psNuUart->userbuf.pvRxBuf, (uint8_t *)psNuUart->userbuf.pvRxBuf + psNuUart->userbuf.wrote_offset, pu8DmaBuf_noncache, pu8DmaBuf_noncache + psNuUart->dmabuf.wrote_offset, psNuUart->userbuf.bufsize, pdma_new_rxsize ); psNuUart->userbuf.wrote_offset %= psNuUart->userbuf.bufsize; } /* Pick up RX bytes in UART FIFO. */ recv_len = 0; while (!UART_GET_RX_EMPTY(base)) { tempbuf[recv_len] = UART_READ(base); recv_len++; RT_ASSERT( recv_len < sizeof(tempbuf) ); } if ( recv_len > 0 ) { /* Update wrote offset of user buffer. */ psNuUart->userbuf.wrote_offset += nu_uart_flush_sync( psNuUart->userbuf.pvRxBuf, psNuUart->userbuf.pvRxBuf + psNuUart->userbuf.wrote_offset, tempbuf, tempbuf, psNuUart->userbuf.bufsize, recv_len ); psNuUart->userbuf.wrote_offset %= psNuUart->userbuf.bufsize; } /* Report received bytes = UART_FIFO_RXSIZE + PDMA_NEW_RXSIZE */ recv_len += pdma_new_rxsize; if (recv_len > 0) { LOG_D("%d(Received) = %d(PDMA) + %d(FIFO)", recv_len - pdma_new_rxsize, pdma_new_rxsize, recv_len); LOG_D("User: [%08x] bufsize=%d, wrote_offset=%d", psNuUart->userbuf.pvRxBuf, psNuUart->userbuf.bufsize, psNuUart->userbuf.wrote_offset); LOG_D("DMA: [%08x] bufsize=%d, put=%d", psNuUart->dmabuf.pvRxBuf, psNuUart->dmabuf.bufsize, psNuUart->dmabuf.wrote_offset); rt_hw_serial_isr(&psNuUart->dev, RT_SERIAL_EVENT_RX_DMADONE | (recv_len << 8)); } /* Enable Receive Line interrupt first. */ UART_ENABLE_INT(base, UART_INTEN_RXPDMAEN_Msk); return recv_len; } static void nu_pdma_uart_rxbuf_free(nu_uart_t psNuUart) { psNuUart->userbuf.pvRxBuf = RT_NULL; psNuUart->userbuf.bufsize = 0; psNuUart->userbuf.wrote_offset = 0; if (psNuUart->dmabuf.pvRxBuf) rt_free_align(psNuUart->dmabuf.pvRxBuf); psNuUart->dmabuf.pvRxBuf = RT_NULL; psNuUart->dmabuf.bufsize = 0; psNuUart->dmabuf.wrote_offset = 0; } static rt_err_t nu_pdma_uart_rx_config(nu_uart_t psNuUart, uint8_t *pu8Buf, int32_t i32TriggerLen) { rt_err_t result = RT_EOK; struct nu_pdma_chn_cb sChnCB; /* Get base address of uart register */ UART_T *base = psNuUart->base; /* Register ISR callback function */ sChnCB.m_eCBType = eCBType_Event; sChnCB.m_pfnCBHandler = nu_pdma_uart_rx_cb; sChnCB.m_pvUserData = (void *)psNuUart; nu_pdma_filtering_set(psNuUart->pdma_chanid_rx, NU_PDMA_EVENT_TRANSFER_DONE | NU_PDMA_EVENT_TIMEOUT); result = nu_pdma_callback_register(psNuUart->pdma_chanid_rx, &sChnCB); if (result != RT_EOK) { goto exit_nu_pdma_uart_rx_config; } /* Store user buffer context */ psNuUart->userbuf.pvRxBuf = pu8Buf; psNuUart->userbuf.bufsize = i32TriggerLen; psNuUart->userbuf.wrote_offset = 0; psNuUart->dmabuf.pvRxBuf = rt_malloc_align(i32TriggerLen, 64); psNuUart->dmabuf.bufsize = 0; if (psNuUart->dmabuf.pvRxBuf == RT_NULL) { LOG_E("Failed to allocate dma memory %d.", i32TriggerLen); goto exit_nu_pdma_uart_rx_config; } psNuUart->dmabuf.bufsize = i32TriggerLen; psNuUart->dmabuf.wrote_offset = 0; /* Disable Receive Line interrupt & Start DMA RX transfer. */ UART_DISABLE_INT(base, UART_INTEN_RLSIEN_Msk | UART_INTEN_RXPDMAEN_Msk | UART_INTEN_RXTOIEN_Msk); /* For Serial RX FIFO - Single buffer recycle SG trigger */ result = nu_pdma_desc_setup(psNuUart->pdma_chanid_rx, psNuUart->pdma_rx_desc, 8, (uint32_t)base, (uint32_t)psNuUart->dmabuf.pvRxBuf, psNuUart->dmabuf.bufsize, psNuUart->pdma_rx_desc, 0); if (result != RT_EOK) { goto exit_nu_pdma_uart_rx_config; } /* Assign head descriptor & go */ result = nu_pdma_sg_transfer(psNuUart->pdma_chanid_rx, psNuUart->pdma_rx_desc, 500); if (result != RT_EOK) { goto exit_nu_pdma_uart_rx_config; } UART_SetTimeoutCnt(base, 255); /* Enable Receive Line interrupt & Start DMA RX transfer. */ UART_ENABLE_INT(base, UART_INTEN_RLSIEN_Msk | UART_INTEN_RXPDMAEN_Msk | UART_INTEN_RXTOIEN_Msk); exit_nu_pdma_uart_rx_config: return result; } static void nu_pdma_uart_rx_cb(void *pvOwner, uint32_t u32Events) { nu_uart_t psNuUart = (nu_uart_t)pvOwner; RT_ASSERT(psNuUart); if (u32Events & (NU_PDMA_EVENT_TRANSFER_DONE | NU_PDMA_EVENT_TIMEOUT)) { rt_size_t pdma_rxsize = 0; if (u32Events & NU_PDMA_EVENT_TRANSFER_DONE) { pdma_rxsize = psNuUart->dmabuf.bufsize; } else { pdma_rxsize = nu_pdma_transferred_byte_get(psNuUart->pdma_chanid_rx, psNuUart->dmabuf.bufsize); } nu_uart_flush(psNuUart, pdma_rxsize - psNuUart->dmabuf.wrote_offset); /* Update rxdma buffer wrote index */ psNuUart->dmabuf.wrote_offset = (psNuUart->dmabuf.wrote_offset + pdma_rxsize) % psNuUart->dmabuf.bufsize; } } static rt_err_t nu_pdma_uart_tx_config(nu_uart_t psNuUart) { struct nu_pdma_chn_cb sChnCB; RT_ASSERT(psNuUart); /* Register ISR callback function */ sChnCB.m_eCBType = eCBType_Event; sChnCB.m_pfnCBHandler = nu_pdma_uart_tx_cb; sChnCB.m_pvUserData = (void *)psNuUart; nu_pdma_filtering_set(psNuUart->pdma_chanid_tx, NU_PDMA_EVENT_TRANSFER_DONE); return nu_pdma_callback_register(psNuUart->pdma_chanid_tx, &sChnCB); } static void nu_pdma_uart_tx_cb(void *pvOwner, uint32_t u32Events) { nu_uart_t psNuUart = (nu_uart_t)pvOwner; RT_ASSERT(psNuUart); UART_DISABLE_INT(psNuUart->base, UART_INTEN_TXPDMAEN_Msk);// Stop DMA TX transfer if (u32Events & NU_PDMA_EVENT_TRANSFER_DONE) { rt_hw_serial_isr(&psNuUart->dev, RT_SERIAL_EVENT_TX_DMADONE); } } /** * Uart DMA transfer */ static rt_ssize_t nu_uart_dma_transmit(struct rt_serial_device *serial, rt_uint8_t *buf, rt_size_t size, int direction) { rt_err_t result = RT_EOK; nu_uart_t psNuUart = (nu_uart_t)serial; RT_ASSERT(serial); RT_ASSERT(buf); /* Get base address of uart register */ UART_T *base = psNuUart->base; if (direction == RT_SERIAL_DMA_TX) { UART_DISABLE_INT(base, UART_INTEN_TXPDMAEN_Msk); /* <16 PDMA TX case. */ if (size < 16) { int i = 0; UART_T *base = psNuUart->base; while (i < size) { /* Waiting if TX-FIFO is full. */ while (UART_IS_TX_FULL(base)); /* Put char into TX-FIFO */ UART_WRITE(base, buf[i]); i++; } rt_hw_serial_isr(&psNuUart->dev, RT_SERIAL_EVENT_TX_DMADONE); } else { result = nu_pdma_transfer(psNuUart->pdma_chanid_tx, 8, (uint32_t)buf, (uint32_t)base, size, 0); // wait-forever // Start DMA TX transfer UART_ENABLE_INT(base, UART_INTEN_TXPDMAEN_Msk); } } else if (direction == RT_SERIAL_DMA_RX) { UART_DISABLE_INT(base, UART_INTEN_RLSIEN_Msk | UART_INTEN_RXPDMAEN_Msk | UART_INTEN_TOCNTEN_Msk); // If config.bufsz = 0, serial will trigger once. result = nu_pdma_uart_rx_config(psNuUart, buf, size); } else { result = RT_ERROR; } return result; } static int nu_hw_uart_dma_allocate(nu_uart_t psNuUart) { RT_ASSERT(psNuUart); /* Allocate UART_TX nu_dma channel */ if (psNuUart->pdma_perp_tx != NU_PDMA_UNUSED) { psNuUart->pdma_chanid_tx = nu_pdma_channel_allocate(psNuUart->pdma_perp_tx); if (psNuUart->pdma_chanid_tx >= 0) { psNuUart->dma_flag |= RT_DEVICE_FLAG_DMA_TX; } } /* Allocate UART_RX nu_dma channel */ if (psNuUart->pdma_perp_rx != NU_PDMA_UNUSED) { psNuUart->pdma_chanid_rx = nu_pdma_channel_allocate(psNuUart->pdma_perp_rx); if (psNuUart->pdma_chanid_rx >= 0) { rt_err_t ret = RT_EOK; psNuUart->dma_flag |= RT_DEVICE_FLAG_DMA_RX; ret = nu_pdma_sgtbls_allocate(&psNuUart->pdma_rx_desc, 1); RT_ASSERT(ret == RT_EOK); } } return RT_EOK; } #endif /** * Uart interrupt control */ static rt_err_t nu_uart_control(struct rt_serial_device *serial, int cmd, void *arg) { nu_uart_t psNuUart = (nu_uart_t)serial; rt_err_t result = RT_EOK; rt_ubase_t ctrl_arg = (rt_ubase_t)arg; RT_ASSERT(serial); /* Get base address of uart register */ UART_T *base = psNuUart->base; switch (cmd) { case RT_DEVICE_CTRL_CLR_INT: if (ctrl_arg == RT_DEVICE_FLAG_INT_RX) /* Disable INT-RX */ { UART_DISABLE_INT(base, UART_INTEN_RDAIEN_Msk | UART_INTEN_RXTOIEN_Msk | UART_INTEN_TOCNTEN_Msk); } else if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX) /* Disable DMA-RX */ { /* Disable Receive Line interrupt & Stop DMA RX transfer. */ #if defined(RT_SERIAL_USING_DMA) if (psNuUart->dma_flag & RT_DEVICE_FLAG_DMA_RX) { nu_pdma_channel_terminate(psNuUart->pdma_chanid_rx); nu_pdma_uart_rxbuf_free(psNuUart); } UART_DISABLE_INT(base, UART_INTEN_RLSIEN_Msk | UART_INTEN_RXPDMAEN_Msk | UART_INTEN_TOCNTEN_Msk); #endif } break; case RT_DEVICE_CTRL_SET_INT: if (ctrl_arg == RT_DEVICE_FLAG_INT_RX) /* Enable INT-RX */ { UART_ENABLE_INT(base, UART_INTEN_RDAIEN_Msk | UART_INTEN_RXTOIEN_Msk); } break; #if defined(RT_SERIAL_USING_DMA) case RT_DEVICE_CTRL_CONFIG: if (ctrl_arg == RT_DEVICE_FLAG_DMA_RX) /* Configure and trigger DMA-RX */ { struct rt_serial_rx_fifo *rx_fifo = (struct rt_serial_rx_fifo *)serial->serial_rx; result = nu_pdma_uart_rx_config(psNuUart, &rx_fifo->buffer[0], serial->config.bufsz); // Config & trigger } else if (ctrl_arg == RT_DEVICE_FLAG_DMA_TX) /* Configure DMA-TX */ { result = nu_pdma_uart_tx_config(psNuUart); } break; #endif case RT_DEVICE_CTRL_CLOSE: /* Disable interrupt. */ rt_hw_interrupt_mask(psNuUart->irqn); #if defined(RT_SERIAL_USING_DMA) UART_DISABLE_INT(base, UART_INTEN_RLSIEN_Msk | UART_INTEN_RXPDMAEN_Msk | UART_INTEN_TOCNTEN_Msk); UART_DISABLE_INT(base, UART_INTEN_TXPDMAEN_Msk); if (psNuUart->dma_flag != 0) { nu_pdma_channel_terminate(psNuUart->pdma_chanid_tx); nu_pdma_channel_terminate(psNuUart->pdma_chanid_rx); nu_pdma_uart_rxbuf_free(psNuUart); } #endif /* Close UART port */ UART_Close(base); break; default: result = -RT_EINVAL; break; } return result; } /** * Uart put char */ static int nu_uart_send(struct rt_serial_device *serial, char c) { nu_uart_t psNuUart = (nu_uart_t)serial; RT_ASSERT(serial); /* Get base address of uart register */ UART_T *base = psNuUart->base; /* Waiting if TX-FIFO is full. */ while (UART_IS_TX_FULL(base)); /* Put char into TX-FIFO */ UART_WRITE(base, c); return 1; } /** * Uart get char */ static int nu_uart_receive(struct rt_serial_device *serial) { nu_uart_t psNuUart = (nu_uart_t)serial; RT_ASSERT(serial); /* Get base address of uart register */ UART_T *base = psNuUart->base; /* Return failure if RX-FIFO is empty. */ if (UART_GET_RX_EMPTY(base)) { return -1; } /* Get char from RX-FIFO */ return UART_READ(base); } void nu_uart_set_loopback(struct rt_serial_device *serial, rt_bool_t bOn) { nu_uart_t psNuUart = (nu_uart_t)serial; RT_ASSERT(serial); /* Get base address of uart register */ UART_T *base = psNuUart->base; bOn ? (base->MODEM |= 0x10) : (base->MODEM &= ~0x10); } /** * Hardware UART Initialization */ rt_err_t rt_hw_uart_init(void) { int i; rt_uint32_t flag; rt_err_t ret = RT_EOK; for (i = (UART_START + 1); i < UART_CNT; i++) { flag = RT_DEVICE_FLAG_RDWR | RT_DEVICE_FLAG_INT_RX; nu_uart_arr[i].dev.ops = &nu_uart_ops; nu_uart_arr[i].dev.config = nu_uart_default_config; #if defined(RT_SERIAL_USING_DMA) nu_uart_arr[i].dma_flag = 0; nu_hw_uart_dma_allocate(&nu_uart_arr[i]); flag |= nu_uart_arr[i].dma_flag; #endif rt_hw_interrupt_install(nu_uart_arr[i].irqn, nu_uart_isr, &nu_uart_arr[i], nu_uart_arr[i].name); ret = rt_hw_serial_register(&nu_uart_arr[i].dev, nu_uart_arr[i].name, flag, NULL); RT_ASSERT(ret == RT_EOK); } return ret; } #endif //#if defined(BSP_USING_UART)