/**************************************************************************//**
 * @file     pwm.c
 * @brief    N9H30 series PWM driver source file
 *
 * @note
 * SPDX-License-Identifier: Apache-2.0
 * Copyright (C) 2018 Nuvoton Technology Corp. All rights reserved.
*****************************************************************************/
#include "N9H30.h"
#include "nu_sys.h"
#include "nu_pwm.h"
/** @addtogroup N9H30_Device_Driver N9H30 Device Driver
  @{
*/

/** @addtogroup N9H30_PWM_Driver PWM Driver
  @{
*/


/** @addtogroup N9H30_PWM_EXPORTED_FUNCTIONS PWM Exported Functions
  @{
*/

//Internal function definition
/// @cond HIDDEN_SYMBOLS

void pwmISR(PVOID pvParam);


static INT pwmInitGPIO(const INT nTimerIdentity, const INT nValue);
static INT pwmInitTimer(const INT nTimerIdentity);
static INT pwmStartTimer(const INT nTimerIdentity);
static INT pwmStopTimer(const INT nTimerIdentity, const INT nMethod);
// Register operation
static INT pwmSetCP(const INT nTimerIdentity, const INT nValue);
static INT pwmSetDZI(const INT nTimerIdentity, const INT nValue);
static INT pwmSetCSR(const INT nTimerIdentity, const INT nValue);
static INT pwmSetDZGenerator(const INT nTimerIdentity, const INT nStatus);
static INT pwmSetTimerState(const INT nTimerIdentity, const INT nStatus);
static INT pwmSetInverter(const INT nTimerIdentity, const INT nStatus);
static INT pwmSetMode(const INT nTimerIdentity, const INT nStatus);
static INT pwmSetCNR(const INT nTimerIdentity, const INT nValue);
static INT pwmSetCMR(const INT nTimerIdentity, const INT nValue);
static UINT pwmGetPDR(const INT nTimerIdentity);
static INT pwmSetPIER(const INT nTimerIdentity, const INT value);
static INT pwmCleanPIIR(const INT nTimerIdentity);

//Global variable
static BOOL bPWMIRQFlag = FALSE; //IRQ enable flag, set after PWM IRQ enable
static BOOL bPWMTimerOpenStatus[PWM_TIMER_NUM]; //timer flag which set after open(for disable IRQ decision)
static BOOL bPWMTimerStartStatus[PWM_TIMER_NUM]; //timer flag which set after Start count(to avoid incorrectly stop procedure)
static BOOL bPWMTimerMode[PWM_TIMER_NUM]; //PWM timer toggle/one shot mode
static BOOL volatile bPWMIntFlag[PWM_TIMER_NUM]; //interrupt flag which set by ISR
/// @endcond /* HIDDEN_SYMBOLS */


/**
  * @brief The init function of PWM device driver
  */
INT pwmInit(void)
{
    UINT temp;
    // Enable PWM clock
    temp = inpw(REG_CLK_PCLKEN1);
    temp = temp | 0x8000000;
    outpw(REG_CLK_PCLKEN1, temp);

    sysInstallISR(IRQ_LEVEL_1, PWM_IRQn, (PVOID)pwmISR);
    sysSetLocalInterrupt(ENABLE_IRQ);  // Enable CPSR I bit

    return 0;
}

/**
  * @brief The exit function of PWM device driver
  */
INT pwmExit(void)
{
    return 0;
}

/**
  * @brief The open function of PWM device driver
  * @param[in] nTimerIdentity PWM Timer channel identity
  * @retval Successful PWM successfully opened
  * @retval pwmTimerBusy PWM timer already open
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
INT pwmOpen(const INT nTimerIdentity)
{
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    if (bPWMTimerOpenStatus[nTimerIdentity] == TRUE)
    {
        return pwmTimerBusy;
    }
    if (bPWMIRQFlag == FALSE)
    {

        sysEnableInterrupt(PWM_IRQn);

        bPWMIRQFlag = TRUE;
    }
    bPWMTimerOpenStatus[nTimerIdentity] = TRUE;

    // Set PWM timer default value(CSR->PPR->PCR->CMR->CNR)
    pwmInitTimer(nTimerIdentity);

    //Enable PIER
    pwmSetPIER(nTimerIdentity, PWM_ENABLE);

    //Reset PIIR
    pwmCleanPIIR(nTimerIdentity);

    //Reset PWM timer start count flag
    bPWMTimerStartStatus[nTimerIdentity] = FALSE;

    return Successful;

}

/**
  * @brief The close function of PWM device driver
  * @param[in] nTimerIdentity PWM Timer channel identity
  * @retval Successful PWM successfully closed
  * @retval pwmTimerNotOpen PWM timer not open
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
INT pwmClose(const INT nTimerIdentity)
{
    INT nLoop;
    BOOL uAllTimerClose = TRUE;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    if (bPWMTimerOpenStatus[nTimerIdentity] == FALSE)
    {
        return pwmTimerNotOpen;
    }
    bPWMTimerOpenStatus[nTimerIdentity] = FALSE;
    //Check if all timer stop, IRQ can be disable
    for (nLoop = PWM_TIMER_MIN; nLoop < PWM_TIMER_NUM; nLoop++)
    {
        if (bPWMTimerOpenStatus[nLoop] == TRUE)
        {
            uAllTimerClose = FALSE;
        }
    }
    //All timer stop, disable IRQs
    if (uAllTimerClose == TRUE)
    {

        sysDisableInterrupt(PWM_IRQn);
        bPWMIRQFlag = FALSE;
    }

    pwmSetPIER(nTimerIdentity, PWM_DISABLE);
    pwmCleanPIIR(nTimerIdentity);


    return Successful;

}

/**
  * @brief The read function of PWM device driver
  * @param[in] nTimerIdentity PWM Timer channel identity
  * @param[out] pucStatusValue The point of typePWMSTATUS
  * @param[in] uLength The length of typePWMSTATUS
  * @retval Successful Read PWM value successfully
  * @retval pwmTimerNotOpen PWM timer not open
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidStructLength Struct length error(struct type error)
  */
INT pwmRead(const INT nTimerIdentity, PUCHAR pucStatusValue, const UINT uLength)
{
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    if (bPWMTimerOpenStatus[nTimerIdentity] == FALSE)
    {
        return pwmTimerNotOpen;
    }
    if (uLength != sizeof(typePWMSTATUS))
    {
        return pwmInvalidStructLength;// Struct length error(struct type error)
    }
    if (sizeof(*((typePWMSTATUS *)pucStatusValue)) != sizeof(typePWMSTATUS))
    {
        return pwmInvalidStructLength;// Struct length error(struct type error)
    }
    ((typePWMSTATUS *)pucStatusValue)->PDR = pwmGetPDR(nTimerIdentity);
    if (bPWMIntFlag[nTimerIdentity] == TRUE)
    {
        bPWMIntFlag[nTimerIdentity] = FALSE;
        ((typePWMSTATUS *)pucStatusValue)->InterruptFlag = TRUE;
    }
    else
    {
        ((typePWMSTATUS *)pucStatusValue)->InterruptFlag = FALSE;
    }

    return Successful;

}

/**
  * @brief The write function of PWM device driver
  * @param[in] nTimerIdentity PWM Timer channel identity
  * @param[in] pucCNRCMRValue The value of CNR and CMR
  * @param[in] uLength For future usage
  * @retval Successful Write PWM setting successfully
  * @retval pwmTimerNotOpen PWM timer not open
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
INT pwmWrite(const INT nTimerIdentity, PUCHAR pucCNRCMRValue, const UINT uLength)
{
    typePWMVALUE pwmvalue;
    INT nStatus;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    if (bPWMTimerOpenStatus[nTimerIdentity] == FALSE)
    {
        return pwmTimerNotOpen;
    }
    if (uLength != sizeof(typePWMVALUE))
    {
        return pwmInvalidStructLength;// Struct length error(struct type error)
    }
    pwmvalue.value = ((typePWMVALUE *)pucCNRCMRValue)->value;
    nStatus = pwmSetCNR(nTimerIdentity, pwmvalue.field.cnr);

    if (nStatus != Successful)
    {
        return nStatus;
    }
    nStatus = pwmSetCMR(nTimerIdentity, pwmvalue.field.cmr);

    if (nStatus != Successful)
    {
        return nStatus;
    }
    return Successful;

}

/**
  * @brief The ioctl function of PWM device driver
  * @param[in] nTimerIdentity PWM Timer channel identity
  * @param[in] uCommand Ioctl command which indicates different operation
  * @param[in] uIndication Not use in PWM
  * @param[in] uValue The value which use with uCommand
  * @retval Successful PWM ioctl execute successfully
  * @retval pwmTimerNotOpen PWM timer not open
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidIoctlCommand Ioctl command error
  * @retval Others Error according to different uCommand
  */
INT pwmIoctl(const INT nTimerIdentity, const UINT uCommand, const UINT uIndication, UINT uValue)
{
    INT nStatus;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    if (bPWMTimerOpenStatus[nTimerIdentity] == FALSE)
    {
        return pwmTimerNotOpen;
    }
    switch (uCommand)
    {
    case START_PWMTIMER:
    {
        nStatus = pwmStartTimer(nTimerIdentity);
        break;
    }
    case STOP_PWMTIMER:
    {
        // default stop method is 2
        nStatus = pwmStopTimer(nTimerIdentity, PWM_STOP_METHOD2);
        break;
    }
    case SET_CSR:
    {
        nStatus = pwmSetCSR(nTimerIdentity, uValue);
        break;
    }
    case SET_CP:
    {
        nStatus = pwmSetCP(nTimerIdentity, uValue);
        break;
    }
    case SET_DZI:
    {
        nStatus = pwmSetDZI(nTimerIdentity, uValue);
        break;
    }
    case SET_INVERTER:
    {
        nStatus = pwmSetInverter(nTimerIdentity, uValue);
        break;
    }
    case SET_MODE:
    {
        nStatus = pwmSetMode(nTimerIdentity, uValue);
        break;
    }
    case ENABLE_DZ_GENERATOR:
    {
        nStatus = pwmSetDZGenerator(nTimerIdentity, PWM_ENABLE);
        break;
    }
    case DISABLE_DZ_GENERATOR:
    {
        nStatus = pwmSetDZGenerator(nTimerIdentity, PWM_DISABLE);
        break;
    }
    case ENABLE_PWMGPIOOUTPUT:
    {
        nStatus = pwmInitGPIO(nTimerIdentity, uValue);
        break;
    }
    default:
    {
        return pwmInvalidIoctlCommand;
    }
    }
    return nStatus;
}


/// @cond HIDDEN_SYMBOLS

/**
  * @brief The interrupt service routines of PWM
  * @param[in] pvParam IRQ Parameter(not use in PWM)
  */
VOID pwmISR(PVOID pvParam)
{
    INT i;

    UINT32 uRegisterValue = 0;
    uRegisterValue = inpw(REG_PWM_PIIR);// Get PIIR value
    for (i = 0; i < PWM_TIMER_NUM ; i++)
    {
        if (uRegisterValue & (1 << i))
        {
            bPWMIntFlag[i] = 1;
            outpw(REG_PWM_PIIR, (1 << i));
        }
    }
}

/**
  * @brief This function set corresponding GPIO as PWM function according to the
  *        parameter nTimerIdentity
  * @param[in] nTimerIdentity Timer channel number
  * @retval Successful PWM init GPIO successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidPin PWM output pin setting error
  */
static INT pwmInitGPIO(const INT nTimerIdentity, const INT nValue)
{
    UINT temp = 0;

    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }

    if (nTimerIdentity == PWM_TIMER0)
    {
        if (nValue == PWM0_GPA12)
        {
            temp = inpw(REG_SYS_GPA_MFPH);
            temp = (temp & ~0x000F0000) | 0xD0000;
            outpw(REG_SYS_GPA_MFPH, temp);
        }
        else if (nValue == PWM0_GPB2)
        {
            temp = inpw(REG_SYS_GPB_MFPL);
            temp = (temp & ~0xF00) | 0xD00;
            outpw(REG_SYS_GPB_MFPL, temp);
        }
        else
            return pwmInvalidPin;
    }
    else if (nTimerIdentity == PWM_TIMER1)
    {
        if (nValue == PWM1_GPA13)
        {
            temp = inpw(REG_SYS_GPA_MFPH);
            temp = (temp & ~0x00F00000) | 0xD00000;
            outpw(REG_SYS_GPA_MFPH, temp);
        }
        else if (nValue == PWM1_GPB3)
        {
            temp = inpw(REG_SYS_GPB_MFPL);
            temp = (temp & ~0xF000) | 0xD000;
            outpw(REG_SYS_GPB_MFPL, temp);
        }
        else
            return pwmInvalidPin;
    }
    else if (nTimerIdentity == PWM_TIMER2)
    {
        if (nValue == PWM2_GPA14)
        {
            temp = inpw(REG_SYS_GPA_MFPH);
            temp = (temp & ~0x0F000000) | 0xD000000;
            outpw(REG_SYS_GPA_MFPH, temp);
        }
        else if (nValue == PWM2_GPH2)
        {
            temp = inpw(REG_SYS_GPH_MFPL);
            temp = (temp & ~0xF00) | 0xD00;
            outpw(REG_SYS_GPH_MFPL, temp);
        }
        else
            return pwmInvalidPin;
    }
    else
    {
        if (nValue == PWM3_GPA15)
        {
            temp = inpw(REG_SYS_GPA_MFPH);
            temp = (temp & ~0xF0000000) | 0xD0000000;
            outpw(REG_SYS_GPA_MFPH, temp);
        }
        else if (nValue == PWM3_GPH3)
        {
            temp = inpw(REG_SYS_GPH_MFPL);
            temp = (temp & ~0xF000) | 0xD000;
            outpw(REG_SYS_GPH_MFPL, temp);
        }
        else
            return pwmInvalidPin;
    }

    return Successful;
}


/**
  * @brief This function initiates PWM timer n and set the default setting to CSR,
  *        PPR, PCR, CNR, CMR
  * @param[in] nTimerIdentity Timer channel number
  * @retval Successful PWM init timer successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmInitTimer(const INT nTimerIdentity)
{
    typePPR PWMPPR;
    INT nStatus;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }

    //Set CSR
    nStatus = pwmSetCSR(nTimerIdentity, DEFAULT_CSR);

    if (nStatus != Successful)
    {
        return nStatus;
    }

    //Set PPR
    PWMPPR.value = (UINT)inpw(REG_PWM_PPR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        if (PWMPPR.field.cp0 == 0)
        {
            pwmSetCP(nTimerIdentity, DEFAULT_CP);
        }
        break;
    }
    case PWM_TIMER1:
    {
        if (PWMPPR.field.cp0 == 0)
        {
            pwmSetCP(nTimerIdentity, DEFAULT_CP);
        }
        break;
    }
    case PWM_TIMER2:
    {
        if (PWMPPR.field.cp1 == 0)
        {
            pwmSetCP(nTimerIdentity, DEFAULT_CP);
        }
        break;
    }
    case PWM_TIMER3:
    {
        if (PWMPPR.field.cp1 == 0)
        {
            pwmSetCP(nTimerIdentity, DEFAULT_CP);
        }
        break;
    }
    }

    //Set PCR
    nStatus = pwmSetMode(nTimerIdentity, DEFAULT_MODE);

    if (nStatus != Successful)
    {
        return nStatus;
    }
    bPWMTimerMode[nTimerIdentity] = DEFAULT_MODE;

    //Set CMR
    nStatus = pwmSetCMR(nTimerIdentity, DEFAULT_CMR);

    if (nStatus != Successful)
    {
        return nStatus;
    }

    //Set CNR
    nStatus = pwmSetCNR(nTimerIdentity, DEFAULT_CNR);

    if (nStatus != Successful)
    {
        return nStatus;
    }

    return Successful;

}


/**
  * @brief This function starts PWM timer according to the parameter
  * @param[in] nTimerIdentity Timer channel number
  * @retval Successful PWM start timer successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmStartTimer(const INT nTimerIdentity)
{
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    pwmSetTimerState(nTimerIdentity, PWM_ENABLE);
    if (bPWMTimerMode[nTimerIdentity] == PWM_TOGGLE)
    {
        bPWMTimerStartStatus[nTimerIdentity] = TRUE;
    }

    return Successful;
}

/**
  * @brief This function stops PWM timer n using method 1, 2, or 3 according to the
  *        parameter nTimerIdentity and nStatus
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nMethod Stop PWM timer method
  * @retval Successful PWM stop timer successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidStopMethod Stop method error
  */
static INT pwmStopTimer(const INT nTimerIdentity, INT nMethod)
{
    typeCNR PWMCNR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        // Timer_num value error
        return pwmInvalidTimerChannel;
    }
    //Can't stop before open PWM timer
    if (bPWMTimerOpenStatus[nTimerIdentity] == FALSE)
    {
        return Successful;
    }
    // one shot mode didn't need stop procedure
    if (bPWMTimerMode[nTimerIdentity] == PWM_ONESHOT)
    {
        return Successful;
    }
    // Timer stop already, no need to stop again
    if (bPWMTimerStartStatus[nTimerIdentity] == FALSE)
    {
        return Successful;
    }

    // Set CNR as 0
    PWMCNR.field.cnr = 0;
    outpw(REG_PWM_CNR0 + (PWM_OFFSET * nTimerIdentity), PWMCNR.value);

    switch (nMethod)
    {
    case PWM_STOP_METHOD1:
    {
        while (1)
        {
            if (pwmGetPDR(nTimerIdentity) == 0)  // Wait PDR reach to 0
            {
                pwmSetTimerState(nTimerIdentity, PWM_DISABLE);// Disable pwm timer
                bPWMIntFlag[nTimerIdentity] = FALSE;
                bPWMTimerStartStatus[nTimerIdentity] = FALSE;
                break;
            }
        }
        break;
    }
    case PWM_STOP_METHOD2:
    {
        while (1)
        {
            if (bPWMIntFlag[nTimerIdentity] == TRUE)  // Wait interrupt happen
            {
                pwmSetTimerState(nTimerIdentity, PWM_DISABLE);// Disable pwm timer
                bPWMIntFlag[nTimerIdentity] = FALSE;
                bPWMTimerStartStatus[nTimerIdentity] = FALSE;
                break;
            }
        }
        break;
    }
    /*case PWM_STOP_METHOD3:
    {
        pwmSetPCRState(nTimerIdentity, PWM_DISABLE);// Disable pwm timer
        bPWMIntFlag[nTimerIdentity] = FALSE;
        bPWMTimerStartStatus[nTimerIdentity] = FALSE;
        break;
    }*/
    default:
    {
        return pwmInvalidStopMethod;// Stop method value error
    }
    }

    return Successful;
}

/**
  * @brief This function set CPn value according to the parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue The value which want to set in CSRn
  * @retval Successful Set CPn successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidCPValue PWM_PPR CPn value out of range
  */
static INT pwmSetCP(const INT nTimerIdentity, const INT nValue)
{
    typePPR PWMPPR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nValue < CP_MIN || nValue > CP_MAX)
    {
        return pwmInvalidCPValue;// CP value error
    }
    PWMPPR.value = (UINT)inpw(REG_PWM_PPR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPPR.field.cp0 = nValue;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPPR.field.cp0 = nValue;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPPR.field.cp1 = nValue;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPPR.field.cp1 = nValue;
        break;
    }
    }
    outpw(REG_PWM_PPR, PWMPPR.value);

    return Successful;
}

/**
  * @brief This function set DZIn value according to the parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue The value which want to set in DZIn
  * @retval Successful Set DZIn successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidDZIValue PWM_PPR DZIn value out of range
  */
static INT pwmSetDZI(const INT nTimerIdentity, const INT nValue)
{
    typePPR PWMPPR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nValue < DZI_MIN || nValue > DZI_MAX)
    {
        return pwmInvalidDZIValue;// CSR value error
    }
    PWMPPR.value = (UINT)inpw(REG_PWM_PPR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPPR.field.dzi0 = nValue;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPPR.field.dzi0 = nValue;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPPR.field.dzi1 = nValue;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPPR.field.dzi1 = nValue;
        break;
    }
    }
    outpw(REG_PWM_PPR, PWMPPR.value);

    return Successful;
}

/**
  * @brief This function set CSRn value according to the parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue The value which want to set in CSRn
  * @retval Successful Set CSRn successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmSetCSR(const INT nTimerIdentity, const INT nValue)
{
    typeCSR PWMCSR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nValue < CSR_MIN || nValue > CSR_MAX)
    {
        return pwmInvalidCSRValue;// CSR value error
    }
    PWMCSR.value = (UINT)inpw(REG_PWM_CSR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMCSR.field.csr0 = nValue;
        break;
    }
    case PWM_TIMER1:
    {
        PWMCSR.field.csr1 = nValue;
        break;
    }
    case PWM_TIMER2:
    {
        PWMCSR.field.csr2 = nValue;
        break;
    }
    case PWM_TIMER3:
    {
        PWMCSR.field.csr3 = nValue;
        break;
    }
    }
    outpw(REG_PWM_CSR, PWMCSR.value);

    return Successful;
}

/**
  * @brief This function enable/disable PWM channel n dead zone function according to the
  *        parameter nTimerIdentity and nStatus
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nStatus PWMDZG_ENABLE/PWMDZG_DISABLE
  * @retval Successful Set dead zone successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidDZGStatus PWM Dead-Zone Generator enable/disable status error
  */
static INT pwmSetDZGenerator(const INT nTimerIdentity, INT nStatus)
{
    typePCR PWMPCR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nStatus != PWMDZG_ENABLE && nStatus != PWMDZG_DISABLE)
    {
        return pwmInvalidDZGStatus;// PCR inverter value error
    }
    PWMPCR.value = (UINT)inpw(REG_PWM_PCR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPCR.field.grpup0_dzen = nStatus;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPCR.field.grpup0_dzen = nStatus;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPCR.field.grpup1_dzen = nStatus;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPCR.field.grpup1_dzen = nStatus;
        break;
    }
    }
    outpw(REG_PWM_PCR, PWMPCR.value);

    return Successful;
}

/**
  * @brief This function set PWM channel n enable/disable according to the
  *        parameter nTimerIdentity and nStatus
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nStatus PWM_ENABLE/PWMDISABLE
  * @retval Successful Set channel enable/disable successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmSetTimerState(const INT nTimerIdentity, INT nStatus)
{
    typePCR PWMPCR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nStatus != PWM_ENABLE && nStatus != PWM_DISABLE)
    {
        return pwmInvalidTimerStatus;
    }
    PWMPCR.value = (UINT)inpw(REG_PWM_PCR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPCR.field.ch0_en = nStatus;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPCR.field.ch1_en = nStatus;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPCR.field.ch2_en = nStatus;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPCR.field.ch3_en = nStatus;
        break;
    }
    }
    outpw(REG_PWM_PCR, PWMPCR.value);

    return Successful;
}


/**
  * @brief This function set PWM channel n inverter on/off according to the
  *        parameter nTimerIdentity and nStatus
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nStatus PWM_ENABLE/PWM_DISABLE
  * @retval Successful Set inverter successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidInverterValue Inverter value error
  */
static INT pwmSetInverter(const INT nTimerIdentity, INT nStatus)
{
    typePCR PWMPCR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nStatus != PWM_INVON && nStatus != PWM_INVOFF)
    {
        return pwmInvalidInverterValue;// PCR inverter value error
    }
    PWMPCR.value = (UINT)inpw(REG_PWM_PCR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPCR.field.ch0_inverter = nStatus;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPCR.field.ch1_inverter = nStatus;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPCR.field.ch2_inverter = nStatus;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPCR.field.ch3_inverter = nStatus;
        break;
    }
    }
    outpw(REG_PWM_PCR, PWMPCR.value);

    return Successful;
}

/**
  * @brief This function set PWM channel n toggle/one shot mode according to the
  *        parameter nTimerIdentity and nStatus
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nStatus PWM_TOGGLE/PWM_ONESHOT
  * @retval Successful Set operation mode successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidModeStatus Operating mode error
  */
static INT pwmSetMode(const INT nTimerIdentity, INT nStatus)
{
    typePCR PWMPCR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nStatus != PWM_TOGGLE && nStatus != PWM_ONESHOT)
    {
        return pwmInvalidModeStatus;// PCR inverter value error
    }
    PWMPCR.value = (UINT)inpw(REG_PWM_PCR);
    switch (nTimerIdentity)
    {
    case PWM_TIMER0:
    {
        PWMPCR.field.ch0_mode = nStatus;
        break;
    }
    case PWM_TIMER1:
    {
        PWMPCR.field.ch1_mode = nStatus;
        break;
    }
    case PWM_TIMER2:
    {
        PWMPCR.field.ch2_mode = nStatus;
        break;
    }
    case PWM_TIMER3:
    {
        PWMPCR.field.ch3_mode = nStatus;
        break;
    }
    }
    outpw(REG_PWM_PCR, PWMPCR.value);
    bPWMTimerMode[nTimerIdentity] = nStatus;

    return Successful;
}


/**
  * @brief This function set PWM_CNRn value according to the parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue CNR value
  * @retval Successful Set CNR successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidCNRValue Invalid CNR value
  */
static INT pwmSetCNR(const INT nTimerIdentity, INT nValue)
{
    typeCNR PWMCNR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nValue < CNR_MIN || nValue > CNR_MAX)
    {
        return pwmInvalidCNRValue;// PCR inverter value error
    }
    PWMCNR.field.cnr = nValue;
    outpw(REG_PWM_CNR0 + (PWM_OFFSET * nTimerIdentity), PWMCNR.value);

    return Successful;
}

/**
  * @brief This function set PWM_CMRn value according to the parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue CMR value
  * @retval Successful Set CMR successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval pwmInvalidCMRValue Invalid CMR value
  */
static INT pwmSetCMR(const INT nTimerIdentity, INT nValue)
{
    typeCMR PWMCMR;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    if (nValue < CMR_MIN || nValue > CMR_MAX)
    {
        return pwmInvalidCMRValue;// CMR value error
    }
    PWMCMR.field.cmr = nValue;
    outpw(REG_PWM_CMR0 + (PWM_OFFSET * nTimerIdentity), PWMCMR.value);

    return Successful;
}

/**
  * @brief This function return the PDR value of PWM timer n
  * @param[in] nTimerIdentity Timer channel number
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  * @retval Others Current PDR value
  */
static UINT pwmGetPDR(const INT nTimerIdentity)
{
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    else
    {
        return (UINT)inpw(REG_PWM_PDR0 + (PWM_OFFSET * nTimerIdentity)); // Return PDR value
    }
}

/**
  * @brief This function set the PIERn bit of PWM timer n as 1 or 0 according to the
  *        parameter nTimerIdentity and nValue
  * @param[in] nTimerIdentity Timer channel number
  * @param[in] nValue PWM_ENABLE/PWM_DISABLE
  * @retval Successful Set PIER successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmSetPIER(const INT nTimerIdentity, INT nValue)
{
    UINT uRegisterValue = 0;;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// Timer_num value error
    }
    else
    {
        uRegisterValue = (UINT)inpw(REG_PWM_PIER);
        if (nValue == PWM_ENABLE)
        {
            uRegisterValue = uRegisterValue | (1 << nTimerIdentity); // Set PIER
        }
        else
        {
            uRegisterValue = uRegisterValue & (0 << nTimerIdentity); // Clear PIER
        }
        outpw(REG_PWM_PIER, uRegisterValue);// Write value to PIER

        return Successful;
    }
}


/**
  * @brief This function clear PIIRn bit according to the parameter nTimerIdentity
  * @param[in] nTimerIdentity Timer channel number
  * @retval Successful Clear PIIR successfully
  * @retval pwmInvalidTimerChannel PWM Timer channel number error
  */
static INT pwmCleanPIIR(const INT nTimerIdentity)
{
    UINT uRegisterValue = 0;
    if (nTimerIdentity < PWM_TIMER_MIN || nTimerIdentity > PWM_TIMER_MAX)
    {
        return pwmInvalidTimerChannel;// nTimerIdentity value error
    }
    uRegisterValue = (UINT)inpw(REG_PWM_PIIR);
    uRegisterValue = uRegisterValue & ~(1 << nTimerIdentity);
    outpw(REG_PWM_PIIR, uRegisterValue);

    return Successful;
}

/// @endcond /* HIDDEN_SYMBOLS */

/*@}*/ /* end of group N9H30_PWM_EXPORTED_FUNCTIONS */

/*@}*/ /* end of group N9H30_PWM_Driver */

/*@}*/ /* end of group N9H30_Device_Driver */

/*** (C) COPYRIGHT 2018 Nuvoton Technology Corp. ***/